Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

*) bgp - added "name" parameter for connections;
*) bgp - added initial support for prefix limit;
*) bgp - fixed "keepalive-timeout" value when upgrading from RouterOS v6;
*) bgp - fixed "l2vpn" distribution;
*) bgp - improved stability when editing BGP template;
*) bgp - moved "interface bgp-vpls" menu to "routing bgp vpls";
*) bgp - remove unused commands and parameters;
*) bluetooth - improved long-term service stability;
*) bonding - added "lacp-user-key" setting;
*) bonding - fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices;
*) bridge - added more details for loop detection warning;
*) bridge - do not set VLAN on inactive port with a "set" command;
*) bridge - fixed TCP, UDP port parsing for loop detect warning;
*) bridge - fixed packet marking for IP/IPv6 firewall;
*) bridge - ignore VLAN tagged BPDU;
*) capsman - fixed bridge disabling when using L2 connection;
*) capsman - fixed loss of manager configuration when "package-path" is set to external disk;
*) capsman - improved traffic processing over CAP communication tunnels:
*) ccr - added "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe;
*) ccr - added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe;
*) ccr - improved interface link stability on CCR2004-16G-2S+PC;
*) ccr - usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe;
*) cd-install - allow selecting on which drive to install RouterOS;
*) chr - fixed Cloud DDNS update after license renewal;
*) conntrack - limited full Connection Tracking warning to 1 message per minute;
*) console - fixed "terminal inkey" command;
*) crs1xx/2xx - improved system stability during switch reset;
*) defconf - do not add passthrough ports to local bridge on CCR2004-1G-2XS-PCIe;
*) dhcpv4-server - added "age" parameter for dynamic leases;
*) dhcpv4-server - fixed conflicting or declined lease detection when IP pool differs from server's configuration;
*) dhcpv4-server - fixed minor logging typo;
*) dot1x - fixed RADIUS State attribute when client is reauthenticated;
*) dot1x - fixed port based VLAN ID assignment on devices without a switch chip;
*) dot1x - improved server stability when using re-authentication;
*) export - fixed value ID exporting that does not refer to any name;
*) fetch - fixed SFTP upload;
*) fetch - improved full disk detection;
*) filesystem - fixed possible boot failure on RB850Gx2 and RB1100AHx2;
*) filesystem - improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7;
*) filesystem - improved long-term filesystem stability and data integrity;
*) gps - added GPS package support for Chateau devices;
*) gps - fixed minor value unit typo;
*) ipsec - fixed IPsec IRQ initialization on startup on TILE;
*) ipsec - fixed printing of active peer statistics;
*) ipv6 - added "ra-preference" parameter support for RA;
*) ipv6 - fixed dynamic non link-local addresses displaying;
*) ipv6 - removed bogus commands from IPv6 neighbors menu;
*) l2tp - added VRF support for L2TP client;
*) l3hw - greatly improved route offloading speed;
*) l3hw - improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
*) l3hw - improved offloading in cases of HW table overflow for CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
*) l3hw - improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices;
*) l3hw - log HW routes count and the shortest offloaded subnet prefix if the HW memory gets full;
*) l3hw - offload only main routing table;
*) l3hw - optimized offloading when dealing with large volume of directly connected hosts;
*) l3hw - partial routing table offload for Marvell Prestera DX4000/DX8000 switch chip series;
*) leds - fixed ethernet LED behavior on wAP R ac;
*) leds - fixed wireless related LED behavior with WW2 package;
*) lhgg - improved system stability (introduced in v7.2);
*) lora - do not allow setting non-existing forwarding server;
*) lora - fixed bogus TOO_EARLY errors;
*) lora - removed TX lookup table;
*) lte - added SMS sending support for MBIM protocol;
*) lte - added support for generic PXA1802 based modems;
*) lte - allow only MCC/NMC format in "operator" parameter;
*) lte - clear SIM values when modem in "stopped" state;
*) lte - disabled extended signal info query for Telit LN940 module;
*) lte - disabled wait for LTE auto attach;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
*) lte - fixed Sierra MC7455 modem initialization;
*) lte - hide slave interfaces from export;
*) lte - improved LTE interface initialization process on LtAP-2HnD;
*) lte - improved stability when configuring multiple APN's at the same time in MBIM mode;
*) lte - improved stability when upgrading LTE firmware on Chateau 5G;
*) mlag - fixed MAC address moving between bridge ports;
*) mpls - do MPLS forwarding for nexthops without mappings;
*) mpls - fixed MPLS MTU and path MTU selection;
*) mpls - fixed MPLS forwarding after any interface configuration parameter is changed;
*) mpls - improved LDP AF selection process and behavior;
*) mpls - made LDP bindings work on PPP interfaces;
*) ntp - do not allow setting port number in "server" parameter;
*) ntp - fixed "use-local-clock" behavior when enabling server;
*) ospf - fixed GRE interface compatibility with OSPF;
*) ospf - ignore instance route when originate-default=if-installed is enabled;
*) ospf - improved stability when enabling or removing interface-template entries;
*) ovpn - adjusted SHA2 authentication algorithm naming to allow legacy OpenVPN implementations to connect;
*) ovpn - fixed hardware offloading support on CHR;
*) ovpn - fixed memory leak on TILE architecture;
*) ovpn - fixed packet processing on MT7621A;
*) ovpn - fixed server instance not responding to incoming connections after reboot on CHR;
*) ovpn - improved Windows client disconnect procedure in UDP mode;
*) ovpn - improved server stability under continous overload;
*) ovpn - improved service stability when outbound packets are blocked by firewall in UDP mode;
*) ovpn - improved service stability when processing frequent disconnects in UDP mode;
*) ovpn - improved stability when forwarding traffic on TILE;
*) ovpn - moved authentication failure messages to "info" logging level;
*) ovpn - reply with the same IP address that the connection was established to;
*) ping - fixed socket allocation after VRF change;
*) port - do not loose "parity" setting;
*) ppp - added support for VRF;
*) ppp - added warning when using prefix length other than /64 for router advertisement;
*) ppp - fixed "remote-ipv6-prefix" parameter unsetting;
*) ppp - fixed active sessions sometimes getting stuck;
*) ppp - fixed issue with multiple active sessions when "only-one" is enabled;
*) profile - added "wireguard" process classificator;
*) profile - added "zerotier" process classificator;
*) qsfp - reset module only when all ports are disabled;
*) queue - allow to set higher limits than 4G;
*) queue - display warning for CAKE type in simple and tree setups when "bandwidth" parameter is configured;
*) queue - improved stability in large list of queue scenarios;
*) rb5009 - fixed 10G linking issues with Intel X520, XXV710 NICs;
*) resource - fixed CPU type display under system resources for ARM and ARM64;
*) romon - fixed VLAN tagged packet processing;
*) route - fixed "nexthop" table printing;
*) route - fixed "table" menu emptying after RouterOS upgrade;
*) route - fixed IPv6 /127 route nexthop resolution;
*) route - fixed static routes in VRF becoming invalid after reboot;
*) route-filter - fixed community matchers;
*) routerboard - fixed USB bus numbering on LtAP and M33G;
*) routerboot - added extra shortcut information on how to boot into etherboot;
*) routerboot - prevent enabling "protected-routerboot" on unsupported factory firmware versions;
*) routerboot - properly reset system configuration when protected bootloader is enabled and reset button used;
*) rsvp-te - improved stability when "Resv" received for non-existing session;
*) sfp - added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation);
*) sfp - hide empty monitor values in console;
*) sfp - improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches;
*) sfp - improved QSFP/SFP interface initialization for 98DXxxxx switches;
*) smb - fixed SMB2 file list reporting;
*) snmp - added VRF support (CLI only);
*) snmp - added VRF support;
*) snmp - fixed reported disk size when multiple external disks are attached;
*) snmp - hide Vendor ID in DHCP MIB when branding is present;
*) snmp - report "ifSpeed" as 0 if value out of bounds (use "ifHighSpeed" for high speed interfaces instead);
*) ssh - added AES-GCM cipher support;
*) ssh - fail non-interactive client after first invalid password;
*) ssh - fixed corrupt host key automatic regeneration;
*) ssh - fixed private key usage after downgrade;
*) ssh - removed DSA public key authentication support;
*) supout - added IGMP-Proxy section;
*) supout - added NTP servers section;
*) supout - added PIMSM section;
*) supout - added RIP section;
*) supout - added WireGuard section;
*) supout - added simplified IPv4 and IPv6 routing table prints;
*) switch - added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting);
*) switch - fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches;
*) system - fixed IP service initialization in VRF after system startup;
*) system - fixed Kernel timer consistency;
*) system - fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall;
*) torch - properly capture all related IPv6 traffic;
*) tr069-client - fixed RPC download of "1 Vendor Configuration File" with branding package;
*) tunnels - improved packet handling over EoIP, IPIP and GRE tunnels;
*) upnp - improved stability when processing incomplete HTTP header;
*) user-manager - added "Acct-Interim-Interval" to predefined attribute list;
*) user-manager - improved stability when received EAP attribute with non-existing state attribute;
*) vpls - fixed "pw-l2mtu" parameter usage;
*) vpls - fixed TE transport path usage after startup;
*) vrrp - fixed learning of bridged local MAC addreses;
*) w60g - improved stability on Cube 60Pro ac and CubeSA 60Pro ac;
*) webfig - properly show all routing table content;
*) wifiwave2 - fixed VLAN tag handling;
*) wifiwave2 - general stability and throughput improvements;
*) winbox - added "Comment" parameter for BGP templates and connections;
*) winbox - added "Default Cost" parameter under "Routing/OSPF/Area" menu;
*) winbox - added "ra-preference" parameter under "IPv6/ND" menu;
*) winbox - added SKID and AKID parameters under "Certificate" menu;
*) winbox - added missing "IBGP", "EBGP", "Limit Exceeded" and "Stopped" parameters under "Routing/BGP/Sessions" menu;
*) winbox - added missing "Keep Sent Attributes" parameter under "Routing/BGP/Connection" menu;
*) winbox - added missing "Scan List" parameter for W60G interfaces;
*) winbox - added missing BGP session commands;
*) winbox - added support for 2.5Gbps and 100Gbps Ethernet speed options;
*) winbox - added warning message for LTE upgrade process;
*) winbox - do not auto start Wireless Sniffer when opened;
*) winbox - do not show "Session Uptime" parameter under "LTE" menu if not supported by modem;
*) winbox - do not show "unknown" area under "Routing/OSPF/LSA" menu;
*) winbox - do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu;
*) winbox - fixed "Disconnect Timeout" parameter type under "CAPsMAN" menu;
*) winbox - fixed "IP/Cloud" window refreshing after changes are detected;
*) winbox - fixed "Type" values under "IP/Route" menu;
*) winbox - fixed graph drawing in QuickSet;
*) winbox - fixed hex type values under "User Manager" menu;
*) winbox - fixed minor typo in reboot confirmation prompt;
*) winbox - fixed typo in ZeroTier instance title;
*) winbox - made "Interface Templates" table sortable under "Routing/OSPF" menu;
*) winbox - made "MPLS Interface" table sortable under "MPLS" menu;
*) winbox - made 56 the default ping size;
*) winbox - made wireless access list entries sortable when using the wifiwave2 package;
*) winbox - minimal required version is v3.33;
*) winbox - moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu;
*) winbox - moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IPv6/Firewall" menu;
*) winbox - properly clean up SFP module information after it is unplugged;
*) winbox - properly clean up disk after a failed file upload;
*) winbox - properly load band values under "LTE" menu;
*) winbox - removed obsolete "Routing Table" parameter under "IP/Firewall" menu;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) winbox - show PVID column by default under "Bridge" menu;
*) winbox - show correct file system type under "System/Disks" menu;
*) winbox - take into account timezone for timed values under "User Manager" menu;
*) wireless - fixed "wmm-support=required" checking;
*) wireless - fixed EAP-TLS authentication;
*) wireless - fixed GUD version in 3gpp information;
*) x86 - added support for Solarflare SFC1920 NIC;
*) x86 - fixed soft-id reading on virtualized x86 installations (introduced in v7.2);
*) x86 - improved support for Intel E810 NIC;
*) zerotier - added support for Controller configuration;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Changelog

    Api - fixed comma encoding within URL when using the ".proplist" argument;
    Bridge - properly process IPsec decapsulated packets through the firewall when the "use-ip-firewall" option is enabled;
    Capsman - require a unique name for configuration and configuration pre-sets;
    Cloud - print critical log message when system clock gets synchronised;
    Console - added ":retry" command;
    Console - fixed situation when print output was not consistent;
    Dns - convert the domain name to lowercase before matching regex;
    E-mail - added VRF support (CLI only);
    Filesystem - fixed repartition on RB5009 series devices;
    Firewall - added "srcnat" and "dstnat" flags to IPv6/Firewall/Connection table;
    Firewall - added support for IPv6/Firewall/NAT action=src-nat rules (CLI only);
    Firewall - fixed IPv6 NAT functionality when processing GRE traffic on TILE devices;
    Firewall - fixed IPv6/Firewall/RAW functionality;
    Firewall - include "connection-mark", "connection-state", and "packet-mark" when packet logging is enabled;
    Firewall - properly handle interface matcher when VRF interface is specified;
    Hotspot - fixed ARP resolution for clients when address pool is specified on the server;
    Hotspot - fixed Walled Garden entries with action=deny;
    Ipv6 - fixed system stability when adding/removing IPv6 address;
    Ldp - correctly handle AFI selection for usage on dual-stack peers;
    Lte - request connect with the same IP type as in LTE attach status for MBIM;
    Lte - fixed Telit AT interface numbering;
    Lte - improved LTE interface detection for LtAP-2HnD devices;
    Lte - keep MBIM working even if AT channel fails to respond in the initialisation stage;
    Mmips - improved USB device detection after system bootup;
    Mpls - fixed VPLS functionality when PW peer is an immediate neighbor;
    Ovpn - use selected cipher by default when the server does not provide "cipher" option;
    Pimsm - improved system stability when changing configuration;
    Ppp - properly try to use different authentication algorithms when Conf-Rej is received during the LCP phase;
    Quickset - specify the "in-interface-list=WAN" attribute on firewall rules created through "Port Mapping";
    Route - added option to join static IGMP and MLD groups (available in "/routing/gmp" menu, CLI only)
    Route - fixed false route type detection as blackhole;
    Route - provide more detailed information about prefixes when using "discourse" tool;
    Routing - moved "/interface bgp vpls" to "/routing bgp vpls" menu;
    Routing-filter - fixed regexp community matcher;
    Ssh - disable ssh-rsa when strong-crypto=yes and use rsa-sha2-sha256;
    Ssh - implemented "server-sig-algs" extension in order to improve rsa-sha2-sha256 support;
    Switch - disabled second CPU core for CRS328-24P-4S+ device in order to improve SFP+ link stability;
    Vxlan - allow to specify MAC address manually;
    Webfig - updated WebFig HTML files with the new MikroTik logo and removed Telnet option from index page;
    Webfig - updated link to the WinBox executable;
    Webfig - updated link to the documentation;
    Wifiwave2 - fixed "frequency-scan" functionality (introduced in v7.3);
    Winbox - add a log and log-prefix options to IPv6 firewall NAT and mangle rules;
    Winbox - fixed IP/Route and IPv6/Route OSPF type value;
    Winbox - removed unused "Apply Changes" button from BGP sessions menu;
    Wireguard - fixed system stability when adding/removing WireGuard interface;
    Wireless - fixed possible traffic flooding to WDS clients when using Nv2 and multicast helper;
    X86 - fixed keep old configuration functionality during x86 setup installation;
    X86 - improved log warning message on failed downgrade attempt;
    X86 - removed "hdd-model" information from installation screen;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Internet Processes Viewer collects and displays active TCP and UDP network connections, including the owning processes and users.

Freeware

https://www.stevechaisonsoftware.com/

[SiLæncer]

Whats new:>>

*) rb3011 - fixed RB3011 going into a reboot loop when the SFP module is present (introduced in v7.3);
*) wifiwave2 - fixed WPA3-PSK authentication incompatibility with certain vendor and model devices;

https://www.mikrotik.com/thedude.php

[SiLæncer]

OverSite can monitor your favorite websites and provides an up/down timeline graph. You can use OverSite to track when your internet connection is up or down by monitoring well-known sites. It can watch any number of websites to see a timeline of when they are up or down. You can also use OverSite within your router or monitor an individual computer's IP address to see when it is awake or asleep.

Freeware

http://www.molliesoft.com/OverSite

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Whats new:>>

Fix an issue with broken links in the splash screen

http://www.pingman.com/

[SiLæncer]

Mit Simple IP Config können die Angaben für die vorhandenen Netzwerkadapter geändert werden (IP, Subnet-Maske,Gateway, DHCP, DNS).
Diese Werte lassen sich als Profile speichern, so das man später nur noch das passende Profil laden muss.

License:    GNU GPLv3

Changelog

    BUG FIXES:

    Internal issues with array handling. (affected lots of things)
    #152 Program antivirus false-positive.

[close]

http://sourceforge.net/p/simpleipconfig/home/Home/

[SiLæncer]

WinPing ist ein kleines Programm, mit dem Sie sowohl Verbindungen im lokalen Netzwerk, als auch im Internet prüfen, bzw. messen können.

Freeware

Whats new:>>

Verbesserungen für alle MS Windows-betriebenen Win-Ping-APP
Aktualisierung der Sprachdateien

http://www.softwareok.de/?seite=Freeware/WinPing

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    'Block CName Cloaking' option added on policies.
    'Bypass DNS Checking' option added for blocklists.
    Baselist has been updated to 4412373.

[close]

https://www.nxfilter.org/

[SiLæncer]

Nethor is a free packet analyzer and visualizer for use with Microsoft Windows. It allows working with multiple open PCAP/PCAPNG files as one in an intuitive and simple user interface. The application does not use any third-part modules or plug-ins, nor the Windows Registry.

License: Open Source

Changelog

   

    New function in Matrix module: Center high density nodes
    3 new categories in Top Ten module
    Some GUI improvements
    Some minor bug fixes

[close]

https://nethor.com/

[SiLæncer]

Changelog

    container - added support for running Docker (TM) containers on ARM, ARM64 and x86;
    defconf - fixed default configuration loading on devices with WifiWave2 package;
    dhcp-relay - fixed DHCPv6 relay forward and reply creation (introduced in v7.1.3);
    dhcp-server - change "vendor-class-id" matcher to generic option matcher;
    dot1x - fixed "undo" command for server instances;
    l2tp - improved stability when establishing l2tp-ether connection (introduced in v7.3);
    leds - fixed GPS LED configuration on LtAP LTE kit;
    leds - fixed LTE signal strength LED configuration on LHGG LTE kit;
    leds - fixed LTE signal strength LED configuration on LtAP LTE kit;
    lte - added AT chat support for Dell dw5821e modem;
    lte - fixed LTE interface running state after modem reconnection;
    mqtt - fixed socket error handling;
    netwatch - added support for more advanced probing;
    ovpn - fixed "called-station-id" RADIUS attribute value for OVPN server;
    ppp - do not fail connection when trying to add existing IP address to address list;
    ppp - log warning message when remote IP address can not be added;
    route - changed "mode" setting to "exclude" for group management protocol (CLI only);
    route - made export run faster on tables with a large number of dynamic routes;
    routing-filter - added origin matcher to match for example routes of a specific OSPF instance;
    routing-filter - made "do-jump" work in select rules;
    ssh - fixed host key generation (introduced in v7.3);
    switch - fixed multicast flooding when HW offloaded bridge port gets disabled;
    system - fixed configuration reset with "run-after-reset" with file stored on ramdisk;
    upgrade - improved RouterOS upgrade stability with attached USB modem on MIPSBE, SMIPS and MMIPS devices;
    w60g - improved interface initialization after being inactive for a while;
    wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces;
    winbox - fixed filename dropdown value filtering;
    x86 - fixed Broadcom NIC support;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

RawCap is a simple network sniffer designed to capture the packets sent and received on your network via raw sockets. The program is designed to be used in command line mode and generates a packet capture file that can be analysed with other applications.

Freeware

https://www.netresec.com/?page=RawCap

[SiLæncer]

An intuitive and fully-featured network app that helps you ping multiple IP addresses at the same time, as well as perform traceroute and path ping operations.

https://www.mylanviewer.com/ping-manager.html

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

GUI

    Upgrade sentry-sdk and psutil
    Check that node names for Qemu and Docker are valid
    Backport reset all console connections. Fixes #2072
    Add more video resolutions to Docker containers using VNC. Fixes #3329
    Add python_requires=">=3.4" in setup.py. Fixes #3326
    Only allow post release corrective versions of GUI and server to interact
    Allow minor versions of GUI and server to interact
    Update VirtViewer path. Fixes #3334

Server

    Release web-ui v2.2.33
    Upgrade sentry-sdk and psutil
    Remove parameter "Name" not useful to create a Docker container
    Support to reset all console connections. Ref GNS3/gns3-server#1619
    Config option to disable built-in templates
    Add hostname entry to sample network config for Docker nodes. Fixes #2039
    Run Xtigervnc with MIT-SHM extension disabled for Docker VNC console support. Fixes #2071
    Added OpenRC init script

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

    GUI:

    Match GNS3 server version

    Server:

    Add missing file for web-ui v2.2.33

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software