Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Added: LAN-12745 Feature notifications in the web console for new features implemented in recent Lansweeper releases
    Changed: LAN-12995 Updated some Azure Active Directory options throughout the web console, as some obsolete feature options were still shown
    Fixed: LAN-13026 In installations with multiple scan servers, the Change Sync Server button under the ConfigurationLink With Cloud Site menu is unresponsive when clicked
    Fixed: LAN-13062 The Startup Type of the Lansweeper Server service is not correctly set to Automatic (Delayed Start)

[close]

http://www.lansweeper.com/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

*) bonding - fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices;
*) bridge - fixed packet marking for IP/IPv6 firewall;
*) dot1x - improved server stability when using re-authentication;
*) fetch - improved full disk detection;
*) gps - fixed minor value unit typo;
*) l3hw - improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
*) led - fixed QSFP+, QSFP28 activity LEDs when using 40Gbps modules (introduced in v7.3beta33);
*) lte - disabled wait for LTE auto attach;
*) mpls - fixed MPLS MTU and path MTU selection;
*) ovpn - fixed hardware offloading support on CHR;
*) ovpn - improved Windows client disconnect procedure in UDP mode;
*) ovpn - moved authentication failure messages to "info" logging level;
*) ppp - added warning when using prefix length other than /64 for router advertisement;
*) ppp - fixed "remote-ipv6-prefix" parameter unsetting;
*) ppp - fixed issue with multiple active sessions when "only-one" is enabled;
*) routerboot - properly reset system configuration when protected bootloader is enabled and reset button used;
*) rsvp-te - improved stability when "Resv" received for non-existing session;
*) sfp - improved QSFP/SFP interface initialization for 98DXxxxx switches;
*) switch - fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches;
*) system - fixed RouterOS bootup when wifiwave2 package is installed (introduced in v7.3beta34);
*) system - fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall;
*) user-manager - improved stability when received EAP attribute with non-existing state attribute;
*) vpls - fixed "pw-l2mtu" parameter usage;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

GUI

    Use public DSNs for Sentry
    Fix exception when doubleclick on NAT node. Fixes #3312
    Fix "Apply" button in the "Preferences" dialog stays gray when templates/nodes are opened by double-click. Fixes #3307
    Add 'reset docks' in the view menu. Ref #3317

server

    Docker: load custom interface files from /etc/network/interfaces (commented by default). Ref #2052
    Release web UI 2.2.32
    Create /etc/network/interfaces.d in Docker container. Fixes #2052
    Prettify Docker '/etc/network/interfaces' file. Ref #2040
    Use public DSNs for Sentry
    Fix VMware Fusion VM does not start on macOS >= 11. Fixes #2027
    Include conf file in MANIFEST.in Ref #2044

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

NetBIOS-, SNMP- und TCP/IP-Scanner; überprüft unter anderem die Erreichbarkeit von Host-Rechnern und zeigt die verschiedenen Typen von Dateien an, die im Netzwerk ausgetauscht werden; unterstützt Wake On LAN und das ferngesteuerte Herunterfahren von Rechnern im Netzwerk.

Shareware

Changelog

    Added: automatic SMTP settings.
    Added: fetching SSL cert details.
    Added: import/export of credentials.
    Fixed: crash in HTTP banner detection.

[close]

https://www.softperfect.com/products/networkscanner/

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    ParamTest.isValidRegex() -> isValidClassificationRule().
    Query again when cloud classifier query times out.
    User login page alias to 'http://server-address/login' added.
    /LOGIN, /LOGOUT, /ADMIN responses added for IBR query by CxForward.
    Baselist has been updated to 4386741.

[close]

https://www.nxfilter.org/

[SiLæncer]

Changelog

    Bgp - added initial support for prefix limit;
    Bgp - improved stability when editing BGP template;
    Bonding - fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices;
    Ccr - added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe;
    Ccr - usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe;
    Cd-install - allow selecting on which drive to install RouterOS;
    Conntrack - limited full Connection Tracking warning to 1 message per minute;
    Crs3xx - fixed storm rate on 1Gbps interfaces for CRS354 devices;
    Defconf - suggest user to set up new password;
    Dhcpv4-server - fixed minor logging typo;
    Fetch - improved full disk detection;
    Filesystem - fixed possible boot failure on RB850Gx2 and RB1100AHx2;
    Filesystem - improved long-term filesystem stability and data integrity;
    Gps - fixed minor value unit typo;
    Ipv6 - removed bogus commands from IPv6 neighbors menu;
    L3hw - improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
    L3hw - improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices;
    Leds - fixed ethernet LED behavior on wAP R ac;
    Leds - fixed wireless related LED behavior with WW2 package;
    Lte - added SMS sending support for MBIM protocol;
    Lte - added support for generic PXA1802 based modems;
    Lte - disabled wait for LTE auto attach;
    Lte - hide slave interfaces from export;
    Lte - improved stability when upgrading LTE firmware on Chateau 5G;
    Mlag - fixed MAC address moving between bridge ports;
    Mpls - do MPLS forwarding for nexthops without mappings;
    Mpls - fixed MPLS MTU and path MTU selection;
    Mpls - fixed MPLS forwarding after any interface configuration parameter is changed;
    Ospf - fixed GRE interface compatibility with OSPF;
    Ospf - improved stability when enabling or removing interface-template entries;
    Ovpn - fixed memory leak on TILE architecture;
    Ovpn - fixed packet processing on MT7621A;
    Ovpn - improved Windows client disconnect procedure in UDP mode;
    Ovpn - improved service stability when processing frequent disconnects in UDP mode;
    Ovpn - improved stability when forwarding traffic on TILE;
    Ping - fixed socket allocation after VRF change;
    Ppp - fixed "remote-ipv6-prefix" parameter unsetting;
    Ppp - fixed active sessions sometimes getting stuck;
    Ppp - fixed issue with multiple active sessions when "only-one" is enabled;
    Queues - improved stability in large list of queue scenarios;
    Rb5009 - fixed 10G linking issues with Intel X520, XXV710 NICs;
    Route - fixed "table" menu emptying after RouterOS upgrade;
    Route - fixed static routes in VRF becoming invalid after reboot;
    Route-filter - fixed community matchers;
    Rsvp-te - improved stability when "Resv" received for non-existing session;
    Supout - added RIP section;
    System - fixed IP service initialization in VRF after system startup;
    System - fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall;
    Torch - properly capture all related IPv6 traffic;
    Upnp - improved stability when processing incomplete HTTP header;
    Vpls - fixed "pw-l2mtu" parameter usage;
    Vrf - fixed VRF leaking;
    Winbox - do not show "unknown" area under "Routing/OSPF/LSA" menu;
    Winbox - do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu;
    Winbox - made "Interface Templates" table sortable under "Routing/OSPF" menu;
    Winbox - properly clean up SFP module information after it is unplugged;
    Winbox - properly clean up disk after a failed file upload;
    Winbox - show PVID column by default under "Bridge" menu;
    Wireless - fixed EAP-TLS authentication;
    Wireless - fixed GUD version in 3gpp information;
    Ww2 - fixed VLAN tag handling;
    x86 - improved support for i40e driver;
    x86 - improved support for Intel E810 NIC;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Whats new:>>

*) system - fixed RouterOS bootup when wifiwave2 package is installed (introduced in v7.2.2);

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetWorx is a simple, yet powerful tool that helps you objectively evaluate your bandwidth situation. You can use it to collect bandwidth usage data and measure the speed of your Internet or any other network connection. NetWorx can help you identify possible sources of network problems, ensure that you do not exceed the bandwidth limits specified by your ISP, or track down suspicious network activity characteristic of Trojan horses and hacker attacks.

Whats new:>>

    This version is a complete rewrite of the product aiming at future extensibility and multi-platform support.
    Added: extensive macOS support.
    Added: colour schemes and dark mode support.
    Improved: uptime & downtime monitor.
    Improved: multiple graph support.
    Improved: graph shows active apps and chart.
    Improved: simplified and refreshed user interface.
    Removed: dial-up features, hourly report, traceroute, ping and most hidden settings.

http://www.softperfect.com/products/networx/

[SiLæncer]

Changelog

    Changed: LAN-12947 System driver scanning of Windows computers is now disabled by default, as the WMI (Windows Management Instrumentation) class containing the driver data can be heavy to read and cause performance issues on the client machine or during scanning
    Changed: LAN-13038 When enabling system driver scanning of Windows computers, a warning is now given regarding the possible impact on performance
    Fixed: LAN-13168 Cleanup operations can erroneously run on certain assets due to an obsolete Azure AD cleanup setting still being applied in the background
    Fixed: LAN-12931 Scanning a Windows computer’s Microsoft Store apps can take a long time and impact scanning performance
    Fixed: LAN-12800 Scanning a Windows computer’s user logon information can take a long time and impact scanning performance

[close]

http://www.lansweeper.com/

[SiLæncer]

A handy tool that allows you to keep a close eye on your Internet connection consumption and help you avoid using all the data in a metered connection in a couple of days.

Apache License 2.0

Changelog

    Fixed a file write error
    Fixed a small warning in the taskbar network speed's implementation.

[close]

https://github.com/Ashfaaq18/OpenNetMeter

[SiLæncer]

A robust ping monitoring tool for automatic checking connection to network hosts. By making regular pings it monitors network connections and notifies you about detected ups/downs. EMCO Ping Monitor also provides connection statistics info, including uptime, outages, failed pings, etc. You can easily extend functionality and configure EMCO Ping Monitor to execute custom commands or launch applications when connections are lost or restored.

Freemium

Changelog

    Resolved issues:

    Monitoring of all hosts is terminated when starting monitoring of a host with a label containing {} symbols

[close]

http://www.emco.is/products/ping-monitor/features.php

[SiLæncer]

LiveTcpUdpWatch is a tool for Windows that displays live information about all TCP and UDP activity on your system. Every line in the main table of LiveTcpUdpWatch displays the protocol (TCP/UDP/IPv4/IPv6), local/remote IP address, local/remote port, number of sent/received bytes, number of sent/received packets, connect/disconnect time (For TCP only), and the process (ID and path) responsible for this activity.

Freeware

Whats new:>>

    Added /Columns command-line option, which allows you to set the columns to display or the columns to export from command-line, for example:

    LiveTcpUdpWatch.exe /Columns "Process Name,Process ID,Protocol,Remote Port,Remote Address,Received Bytes,Sent Bytes"

https://www.nirsoft.net/utils/live_tcp_udp_watch.html

[SiLæncer]

AppNetworkCounter is a simple tool for Windows that counts and displays the number of TCP/UDP bytes and packets sent and received by every application on your system. For every application, the following information is displayed: the number of sent and received bytes, number of sent and received packets, number of sent/received IPv4 bytes, and number of sent/received IPv6 bytes. It also displays the version information of the application - Product Name, Product Version, File Description, and Company Name.

Freeware

Whats new:>>

Added 'Add Header Line To CSV/Tab-Delimited File' option (Turned on by default).

https://www.nirsoft.net/utils/app_network_counter.html

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

    Improvements:

    Rewrite license & agent configuration Windows Installer option for embedded builds & various improvements to agent auto-update functionality.

[close]

http://www.pingman.com/

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Whats new:>>

Fix an issue causing the "No agent registry configuration read" error while running as an application

http://www.pingman.com/