Thema: DVBStreamExplorer ....

[SiLæncer]

Für TT-PCline budget/premium/usb, Wintv Nexus/Nova, SkyStar1,B2C2/SkyStar2/Sky2PC/Cable4PC/Air2PC, TT-Micro Plus/Hauppauge DEC, Twinhan VisionPlus DTV, Pinnacle PCTV Sat

(Windows 2000/XP only).





Gibts hier : http://www.dvbstreamexplorer.dk/download.php

[SiLæncer]

Neu :    

* Added save A/V pes streams option
* Added save A/V es streams option
* FIX: On a fresh installation, in LNB/DisEqC settings dialog it would not save selected settings until you closed the application and started it again.
* Added new Twinhan driver for blue boards using THSource.ax from SDK V2.2.
* Added generic BDA driver. It has only been tested with Nova-S card with BDA drivers installed.
* FIX: scanning current NIT was not possible for DVB-C and DVB-T cards because no satellite was selected and satellite selection does not apply for these network types.

[SiLæncer]

* Added raw memory dump of descriptors in pidscanner.
* Extended TS File driver, so at least some plugin-ins (i.e. DSMCC and streaming to disk) can be used with a TS file as input.
* Applied a work around to prevent a crash on a certain ARD MHP stream. This is just a temporary fix until the problem is fully understood.
* Removed frequency validation in tuning for TTPremium, TTBudget, TTUSB and TTMicro DVB-T devices. This is to allow for VHF freqeuncies to be tuned.


http://www.dvbstreamexplorer.dk

[SiLæncer]

* PIDSCAN: Added parsing of sequence_header and seqeunce_extension of video streams. This will give information such as height, width, chroma format, bit rate , frame rate etc.
* PIDSCAN: Added parsing of 11172-3 audio header. This will give information such as MPEG layer, bit rate, sample frequncy etc.
* PIDSCAN: Added identification of AIT streams, and streams carrying MHP application Object Carousel data.
* FIX: bug in AIT parser. protocol_id field in transport protocol descriptor always indicated IP transport, even for cases where OC was used as transport.

Quelle : www.dvbstreamexplorer.dk

[SiLæncer]

PIDSCAN: Some features are now available in free version for trial. Note that PIDSCAN only works with full TS capture capable devices.

[SiLæncer]

    * Enabled one minute AVI/WMV/PVA recording for trial purposes in free version.
    * Enabled one minute VidelLan (VLC) streaming for trial purposes in free version.

[SiLæncer]

    * FIX: buffer over-run bug in TS processing filter.
    * FIX: Several bugs in BDA support. And now it should no longer be necessary to apply TuningSpace.reg registry patch.
    * FIX: you will no longer get an error when installing DVBSE and Windows Media Encoder is not installed (could not find WMVCore.dll error). However you will not be able to use Record Service (WMV) until you install Windows Media Encoder. Windows Media Encoder can be downloaded from Microsoft.

http://www.dvbstreamexplorer.dk/

[SiLæncer]

* FIX: "Failed to create plugin instance: 80040154" problem. The custom PID chart control was not being registered correctly when pidscan.dll was loaded.

http://www.dvbstreamexplorer.dk

[SiLæncer]

* TT-Budget driver compiled with latest SDK from TechnoTrend(v2.19). Verified, working with Nova-S PCI.
* TT-USB driver compiled with latest SDK from TechnoTrend(v2.19). Not verified, I don't have hardware for testing.
* Added new TTUSB2 driver (BETA) compiled with latest USB2 SDK from TechnoTrend(v2.19). I assume that this is for the new TT-Connect USB boxes, but this is not yet confirmed. Not verified, I don't have hardware for testing.
* TT SDK version number is now incluced in driver list for all TT devices except TT-Micro.
* Included b2c2_2 BETA driver in build. This should enable features in DVBSE that require full TS capture. Not verified, I don't have hardware for testing.
* Satellite name is now also exported for each service when using "Save Services..." menu.

[SiLæncer]

* FIX: bug in parsing of TeleText descriptor.
* FIX: Bug in Twinhan DiSEqC code setting tuner during SI scan.
* Added two registry files (LoggingOn.reg, LoggingOff.reg) to allow quick switching on and off of logging.
* Added export/import of transponder list in satellite list mgr.
* "Remove 'dead' secondary transponders" option in satellite list mgr transponder cleanup changed to "Remove 'dead' transponders"
* FIX: some bugs in satellite list mgr transponder cleanup.
* Creating "My DVBStreamExplorer Files" folder in "My Documents" folder of current users and in "Shared Documents" folder.
* Major changes in LNB/DiSEqC for all TechnoTrend based devices. Configuration from previous build will be broken. You will need to re-apply your LNB/DiSEqC after installing this build. You will need to select the satellite positions you want to scan from the global satellite list (satellite list mgr). For each of the selected satellite positions you will need to configure a DiSEqC option. DiSEqC option can no longer be set in tuning dialog. DiSEqC option is implicitly set by DiSEqC option configured for selected satellite.
* Added support for DiSEqC 1.2 motor control for all TechnoTrend based devices.
* To utilize DiSEqC 1.2 motor control you must configure orbital position of each satellite position controlled by motor in satellite list mgr. Follow the instructions in transponder list dialog. To open transponder list dialog, double-click on a satellite entry in satellite list mgr.
* To utilize DiSEqC 1.2 motor control you must configure the speed of your motor on LNB/DiSEqC settings tab in device Configuration dialog. You must also configure DiSEqC 1.2 option for each of the satellites in the list which are motor controlled. You must also configure DiSEqC position. Note that this is the memory position in positioner/motor and not the orbital position of satellite. Follow the instructions on dialog.
* When moving dish DVBSE will use a calculated delay before setting tuner to give the motor time to move to new location. This delay is calculated from configured motor speed, and the difference in orbital positions configured for the positions being moved from and to. On the first motor move after DVBSE has been launched the position moving from is not known, thus it will calculate a worst-case delay of position difference of 160 degrees.
* NOTE: TechnoTrend officially only supports DiSEqC 1.0. Connecting a motor to your TechnoTrend/OEM device and any damage this might cause is on your own responsibility.
* DiSEqC 1.2 support in DVBSE had been successfully tested with a Hauppauge Nexus-s card connected to a SG2100 motor.


www.dvbstreamexplorer.dk

[SiLæncer]

* All TechnoTrend drivers, except TTMICRO, are now compiled with MSVC 7.1.
* FIX (BDA): A problem with AVerMedia DVB-T device where Tuner and Capture devices are implemented in the same DirectShow filter. This caused DVBSE to crash since it was expecting these devices to be implemented in separate filters.
* Added some information properties for ALL NETWORK, network and transponders nodes in SI tree view. Properties are shown in values pane.
* Various signal properties (signal level, signal quality, singal BER and signal SNR) are now collected during scan for all TechnoTrend based devices except TTMICRO. These properties are shown on transponder node, and they are saved to/loaded from XML file.
* Time stamp of when transponder was scanned is now collected. This property is shown on transponder node, and is saved to/loaded from XML file.
* BDA: generel fixes. Signal lock is now properly detected. It is now confirmed to be working with Hauppauge Nova-t 90002 by author. It has been reported to be working with Terratec Cinergy T2 USB2 by user.
* Fixed parsing bug in Terrestrial delivery system descriptor.
* Added export of service information to CSV file (flat list). Currently only available for DVB-S.

www.dvbstreamexplorer.dk

[SiLæncer]

* FIX: database export did not work if you typed the file name directly instead of using browse button in export dialog box.
* FIX: sat list mgr transponder import did not work if there was 0 or 1 transponder already defined in the satellite. In that case only one entry from CSV file would be imported.
* NEW: Export of service information to JET(MDB) and MSDE/MSSQL. There are two types of export: (1) flat (simple), just one table for service information. Not all properties are preserved, i.e only one audio pid is exported (subject to preferred language). Table is suitable for viewing in MS Access where filtering and sorting can be applied. (2) relational (complex). Information is exported to multiple tables. All stream and CA information is preserved. This is in a format similar to the format used internally by service viewer. Not suitable to be viewed in MS Access due the many tables and relations involved. Instead is recommed that you make your own applications that queries the exported database for information. Only Windows integrated authentication is supported in this version. The user name and password that can be specified is currently ignored.
* NEW: added option to set preferred language for elementary streams. I.e. this will be used to determine i.e. the default audio PID for service oriented plug-ins like service player. Also added option to set prefereed CA for servcices, though this is probably not as useful as the language option.
* Only one instance of DVBSE will be allowed to run. You will receive an error if you try to start a second instance. Many of the device API's supported by DVBSE only allow one application to control the hardware resources. And in some cases starting a second application seems to cause crashes. Thus it makes sense to only allow one instance running at the time.
* TTPREMIUM driver is now compiled with SDK 2.19. Now DVBSE should work with Hauppauge Nexus-s 2.3 cards.
* FIX: DISEQC 1.2 GOTO POSITION command was sent even if motor was already in correct postion. This could cause strange errors like spurious movement of motor.
* CHANGE: SI scanning functions 'Single satellite' and 'All configured satellites' has been replaced by one function 'Scan satellites'. Here you can select exactly which satellites to be scanned, included just one satellite or all of them.
* Free version will now allow one transponder to be saved and loaded for trial purposes.

www.dvbstreamexplorer.dk

[SiLæncer]

* When clicking on transponder entry in satellite list manager, the transponder parameters will now be shown.
* FIX: CSV exported teletext/subtitle page values were incorrect.
* Added button in SI scanning dailog to select all satellites.
* FIX: DiSEqC settings were lost for TechnoTrend based devices, if DVBSE failed to initilalize driver during startup. I.e. this could happen if a USB device was not connected during startup.
* FIX: buffer overrun when handling service name. This caused a crash when pressing 'close' in SI scanning dialog after scanning 11617V on 7E. This transponder had a service with an unusual long name.
* Added more information about tuning (frequency, success and failure) in satellite list manager NIT update/cleanup and SI scanning.
* B2C2/B2C2_2: FEC was not set in tuner dialog when a transponder was selected from the list.
* B2C2/B2C2_2: minor fixes. These drivers should be more stable now.
* B2C2/B2C2_2: changed LNB/DiSEqC configuration. You will need to re-configure settings after installing this build. You will need to add the satellites you use (selected from global list of satellites) and for each of then configure DiSEqC option.

www.dvbstreamexplorer.dk

[SiLæncer]

* TTUSB: added option to apply limits (min, max) on symbol rates accepted during SI scan.
* FIX: if service or provider name contains '"' characters these will now be escaped with an extra '"' character when exporting to CSV file.
* FIX: during SI satellilte scan with 'Read NIT tables from primary transponders' option enbled it was possible for a transponder to be scanned more than once if it was referenced from multiple NIT tables. Now transponders that have already been scanned will be skipped. This will help reducing the scan time of satellites.
* B2C2_2: Fixed a serious problem that TS filter was not released after first usage. This meant that any scan operation would only work once. You would see the problem on SI scan of multiple transponders, where you would get almost or no data after scanning the first transponder. B2C2_2 is now quite stable when SI scanning multiple transponders. The full TS capture functions (pidscanner and save entire TS to file) are also working now.

http://www.dvbstreamexplorer.dk/

[SiLæncer]

* DSCMCC: Private bytes length were always shown as zero in DownloadServerInitiate section. Added hex dump of raw private bytes data.
* TT All devices: active transponder will no longer be saved on application exit and re-applied on next application launch. You will now have to explicitly tune every time application i launched.
* TT All DVB-S devices: LNB power will now be turned off on application exit.
* TT BUDGET/USB/USB2: now compiled with TT SDK 2.19a
* TT ALL: added small delay (up to 2 seconds) when tuning waiting for signal to lock.
* BDA: minor fixes
* NEW: added MUX list manager for DVB-C and DVB-T. This is similar to the Satellite list manager that already exists for DVB-S. Here you can maintain a list of the MUX'es available in your area. Added option to SI scan multiple DVB-T and DVB-C muxes selected from the MUX list. MUX'es can be manually added to list or added automatically by scanning full band.
* FIX: DVB-T/C frequencies were exported to database using incorrect units.

www.dvbstreamexplorer.dk