Anzeigen der neuesten Beiträge
0 Mitglieder und 1 Gast betrachten dieses Thema.
- This driver introduces significant performance improvements for many games across ALL 28nm AMD Radeon™ HD 7000 Series products: HD 7700, HD7800 and HD7900- Performance Highlights of the AMD CATALYST 12.11 BETA Driver- 10%-15% more performance in Battlefield 3 in most cases- More than 20% in certain missions and sequences (Comrades)- Up to 7% more performance in Metro 2033- Up to 10% more performance in DIRT Showdown- Up to 8% more performance in Sleeping Dogs- Up to 12% more performance in Civilization V- Up to 10% more performance in StarCraft II- Up to 8% more performance in Sniper Elite: V2- Resolved issue highlights of AMD Catalyst 12.11 Beta Driver- Medal of Honor: Warfighter; AMD Catalyst 12.11 Beta4 resolves an application crash found when running in AMD CrossFire mode with Anti-Aliasing enabled (This issue was observed in the AMD Catalyst 12.11 Beta3; The AMD Catalyst 12.11 Beta4 has replaced th- Resolves performance issues (where GPU activity runs at lower values than expected) seen on the AMD Radeon HD 7870- AMD Catalyst Mobility 7970M performance for AMD Enduro™ Technology supported platforms has been substantially improved for DirectX 10 and DirectX 11 applications. An updated driver for 7970M users featuring AMD Enduro™ Technology with additional DirectX 9- 3DMark Vantage – Up to 15%- 3DMark 11 – Up to 12%- AvP – Up to 11%- Battlefield 3 – Up to 25%- Crysis 2: Up to 45%- DiRT Showdown – Up to 62%- ETQW – Up to 8%- Hard Reset – Up to 8%- Just Cause 2 – Up to 90%- The Chronicles of Riddick – Up to 4%- Shogun 2 – Up to 56%- Sniper Elite V2 – Up to 60%- Tom Clancy’s HAWX – Up to 56%- Unigine Heaven – Up to 33%- Wolfenstein – Up to 9%- AMD Catalyst 12.11 Beta6 resolves the issue with engine and memory clocks running too high when the GPU is idle. Clocks will now run at the proper level when the GPU is idle. This issue was only observed with specific displays and was observed in the A- Additional update found in AMD Catalyst 12.11 Beta7- Call of Duty Black Ops 2: AMD CrossFire performance has been improved in the AMD Catalyst 12.11 Beta7 release (especially at higher resolutions – such as 2560x1600)- Please note that AMD Catalyst 12.11 Beta 7 includes all of the fixes found in previous versions of AMD Catalyst 12.11 Beta
- Improves performance in Far Cry 3 (up to 25% with 8xMSAA, SSAO enabled @ 1600p, and up to 15% with 8xMSAA, HDAO enabled @1600p) (AMD Catalyst 12.11 CAP2 must also be installed)- Resolves a sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets- Resolves an intermittent hang encountered with AMD Radeon HD 7000 Series GPUs in a CrossFire Eyefinity setup- Resolves image corruption found in certain DirectX 9.0c titles- Resolve missing fonts issue in XBMC- Resolves no video issue found in Media Player Classic Home Cinema when using full or half floating point processing- Resolves stability issues found in the previous AMD Catalyst 12.11 Beta8 driver for Linux- For users experiencing issues with HDMI Audio under Ubuntu 12.04, users should try installing the “dkms-hda - 0.201211291615~precise1” package from https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages and reboot; this will resolve t- AMD Catalyst 12.11 CAP2 has just been released, and should be used in conjunction with AMD Catalyst 12.11 Beta11- Improves Far Cry 3 performance for single GPU configurations with AA enabled
FEATURE HIGHLIGHTS OF THE AMD CATALYST 13.1:AMD Catalyst Control Center: New 3D settings and profile management user interface: AMD Catalyst 13.1 features a newly designed 3D application settings page, designed to allow users to more easily adjust and control their 3D settings on a per application basis.Performance Highlights of AMD Catalyst 13.1 (vs. AMD Catalyst 12.10): Includes all of the performance improvements found in AMD Catalyst 12.11 Beta 11 Performance gains seen on the entire AMD Radeon HD 7000 Series: All game were tested at high / extreme / ultra levels Enhanced performance in Far Cry 3 (up to 25% with 8xMSAA, SSAO enabled @ 1600p, and up to 15% with 8xMSAA, HDAO enabled @1600p) (AMD Catalyst 12.11 CAP2 must also be installed) Enhanced AMD CrossFire™ scaling performance in Call of Duty Black Ops 2 Up to 10%-15% more performance in Battlefield 3 in most cases • More than 20% in certain missions and sequences (Comrades) Up to 7% more performance in Metro 2033 Up to 10% more performance in DiRT Showdown Up to 8% more performance in Sleeping Dogs Up to 12% more performance in Civilization V Up to 10% more performance in StarCraft II Up to 8% more performance in Sniper Elite: V2 Up to 5% more performance in Max Payne 3 AMD Catalyst Mobility 7970M performance for AMD Enduro™ technology supported platforms has been improved for DirectX® 9, DirectX 10 and DirectX 11 applications: 3DMark® 06 – Up to 6% 3DMark Vantage – Up to 15% 3DMark 11 – Up to 12% AvP – Up to 11% Battlefield 3 – Up to 25% Call of Duty: Black Ops – Up to 13% Crysis 2: Up to 45% DiRT Showdown – Up to 62% ETQW – Up to 8% Hard Reset – Up to 8% Just Cause 2 – Up to 90% Mafia 2 – Up to 40% The Chronicles of Riddick – Up to 4% Shogun 2 – Up to 56% StarCraft 2 – Up to 25% Skyrim – Up to 45% Sniper Elite V2 – Up to 60% Tom Clancy’s HAWX – Up to 56% Unigine Heaven – Up to 33% Wolfenstein – Up to 9%Resolved Issues for the Windows 8 / Windows 7 Operating Systems:This section provides information on resolved known issues in this release of the AMD Catalyst 13.1 software suite. A sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets. An intermittent hang encountered with AMD Radeon HD 7000 Series GPUs in an AMD CrossFire + Eyefinity setup. Missing fonts in XBMC No video found in Media Player Classic Home Cinema when using full or half floating point processing Skyrim lighting (missing a lighting pass) for the AMD Radeon HD 7900 Series Skyrim cloud corruption experience in various in game locations A hang playing Dishonored on the AMD Radeon HD 6000 and AMD Radeon HD 5000 Series Engine and memory clocks running too high when the GPU is idle. GPU activity runs at lower values than expected seen on the AMD Radeon HD 7870. Corruption seen in Darkness 2 and Carrier Command when using AMD CrossFire configurations Adobe Premier Pro CS6 may fail to launch Hang experienced with AMD Crossfire and Eyefinity enabled on X58 and X78 chipsets Corel PaintShop Pro X3 – Hangs at the “Initializing Command Manager” window Company of Heroes 2 – display corruption experienced when AA is enabled in the AMD Catalyst Control Center Cyberlink Powerdirector 10 crashes intermittently. Company of Heroes : Tales of Valor – Flickering experienced when AA is disabled Max Payne 3 – Flickering experienced in DirectX 9 mode with forced AA enabled Cyberlink PoweDVD 10 – crashes intermittently VLC - Green texture corruption seen in 720p MPEG2 video clips Black screen encountered when “Alternate DVI mode” is enabled in the AMD Catalyst Control Center Green display corruption seen in Skype webcam videoKnown IssuesThe following section provides a summary of open issues that may be experienced with the AMD Catalyst 13.1 software suite.Known issues under the Windows 8 Operating System. Sleeping Dogs – game may fail to launch in certain configurationsKnown issues under the Windows 7 Operating System. Shogun 2 – Total War : flickering experienced when game is run in medium quality mode
- Support for AMD CrossFire™ Frame Pacing- Frame Pacing ensures that frames rendered across multiple GPUs in a CrossFire configuration will be displayed at an even and regular pace- Enabled through the AMD Catalyst Control Center; Globally or on a per application basis- Frame Pacing is enabled by default- Supported for DirectX 10 and DirectX 11 applications, and resolutions up to and including 2560x1600 (single display)- OpenGL 4.3 support – full support for the OpenGL 4.3 feature set- Performance improvements found in AMD Catalyst 13.8 Beta for Windows:- Metro: Last Light – improves performance up to 7% on the AMD Radeon™ HD 7000 Series- OpenGL support for User Profiles and Catalyst Application Profiles:- Users can now create per application 3D setting profiles for OpenGL applications- OpenGL applications are now supported through Catalyst Application Profile updates (for single GPU and AMD CrossFire configurations)- AMD Enduro Technology enhancement - Catalyst Control Center will now show which applications are active on the Performance GPU, and the Power-Saving GPU- Resolved issues:- Resolved crash when enabling AMD CrossFireX™ on some AMD 970 platforms- Improved stability for AMD Radeon HD 7790- Resolved intermittent mouse cursor corruption when rapidly moving the cursor across window borders
FEATURE HIGHLIGHTS OF AMD CATALYST™ 13.9The AMD Catalyst 13.9 WHQL is AMD’s first logo certified driver for Windows 8.1. It does not include support for Frame Pacing or the very latest AMD CrossFire™ optimizations. AMD Catalyst 13.10 Beta includes additional performance improvements and fixes not found in AMD Catalyst 13.9 WHQL. AMD’s first logo certified driver for Windows 8.1 Includes WDDM 1.3 support for: AMD Accelerated Processors (“Kabini” & “Temash”) for Desktop, Notebook or Tablet PCs, including: A4-1200, A4-1250, A4-5000, A4-5100, A4-5150, A6-1450, A6-5200, A6-5250, A6-5350, E1-2100, E1-2200. E1-2500, E1-2600, E1-2650, E2-3000, E2-3100 AMD Accelerated Processors (“Richland”) for Desktop or Notebook PCs, including: A10-5700, A10-5745M, A10-5750M, A10-5757M, A10-5800B, A10-5800K, A8-5500, A8-5500B, A8-5545M, A8-5550M, A8-5557M, A8-5600K, A6-5345M, A6-5350M, A6-5357M, A6-5400B, A6-5400K, A4-5145M, A4-5150, A4-5300, A4-5300B AMD Accelerated Processors (“Trinity”) for Desktop or Notebook PCs, including: A10-4600M, A10-4655M, A10-4677M, A10-5700, A10-5800B, A10-5800K, A8-4500M, A8-4555M, A8-4557M, A6-4400M, A6-4455M, A6-5400B, A6-5400K, A4-4300M, A4-4355M, A4-5300, A4-5300B AMD Radeon HD 8000 Series AMD Radeon HD 7000 Series AMD Radeon HD 6000 Series AMD Radeon HD 5000 Series Support for AMD Features: AMD Eyefinity OpenCL™ OpenGL UVD AMD Dual Graphics/AMD CrossFire Technology AMD Overdrive™ AMD Catalyst Control Center/Vision Engine Control Center OpenGL support for User Profiles and Catalyst Application Profiles Users can now create, per application, 3D setting profiles for OpenGL applications. OpenGL applications are now supported through Catalyst Application Profile updates (for single GPU and AMD CrossFire configurations). AMD Enduro™ Technology enhancements: The AMD Catalyst Control Center now shows which applications are active on the Performance GPU and the Power saving GPU. RESOLVED ISSUES Severe flicker in Far Cry® 3 game cinematic that may continue into gameplay. BSOD crash when enabling CrossFire in the AMD Catalyst Control Center after installing a third AMD Radeon HD7790 graphics card. BSOD crash in Windows 8 when display turns off (idle/sleep mode). AMD Catalyst Control Center crash after creating an Eyefinity Group. Disappearing mouse cursor in Windows 8 after completing the AMD Catalyst Driver installation and rebooting the system. Cyberlink PowerDVD stop working with a pop-up error message during playback of a Blu-Ray movie under Power Saving mode. When Dual Graphics is disabled within AMD Catalyst Control Center, the secondary display connected may not enable. Frame drops experienced during playback of interlaced Blu-Ray content when all visual quality settings are enabled in AMD Catalyst Control Center. Significant game performance slowdowns when moving the mouse cursor in World of Warcraft using DirectX 9 rendering mode. Anti-aliasing and anisotropic filtering settings saved within created AMD Catalyst Control Center application profiles do not apply correctly. Windows 8 Metro applications experience very low FPS when Dual Graphics is enabled in the AMD Catalyst Control Center.
Autor
Thema: AMD Catalyst ... (Gelesen 20409 mal)
