Autor Thema: SmartDVB 0.3.0 RC  (Gelesen 63686 mal)

0 Mitglieder und 2 Gäste betrachten dieses Thema.

Offline ritschibie

  • Aufpass-Cubie
  • *****
  • Beiträge: 11184
  • Ich liebe dieses Forum!
Re: SmartDVB public beta 0.3.0
« Antwort #270 am: 02 März, 2013, 21:04 »
Thx for reply and further infos Jack  :)

By pure instinct you did the right thing to not intervene! Normally, the shout should not be used for technical questions simply because the shout has no archiviation
which is needed if everybody wants to share insights into technical problems with a program.  But, as you know human beings are not perfect so it's even me that
violates from time to time this rule (a little bit). It's to seducing knowing somebody is out there who is experienced and might give you - in real time - a hint or a
solution for a "small" problem! Anyway, if I get such a hint I try to reproduce it on the specific topic so that no damage is done in the end.

Thx for your kind words for my return. No, I did not go overboard having to much fun. I had very sunny and (besides the flight hours) relaxing weeks in Thailand. Down
there I restricted myself to not much more than 1 hour a day in the Inet (left aside some Skype hours) so I could not follow smartDVB issues in a day per day sequence.
Back here it feels cold but this will be over (hopefully) in short time - at least the minus degrees!

Have a nice spring
Ritschie
Intel Core i7-4770K - ASRock Z87 Extreme6/ac - Crucial Ballistix Sport DIMM Kit 16GB, DDR3-1600 - Gigabyte Radeon R9 290 WindForce 3X OC
TBS DVB-S2 Dual Tuner TV Card Dual CI  - DVBViewer pro 5.3 und Smartdvb 4.x.x beta - 80 cm Schüssel, 2xQuad-LNB - Astra (19.2E)/Hotbird (13E)
I-net mit Motzfuchs ; WLAN: Fritz 7390; BS: Windows 10

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB public beta 0.3.0
« Antwort #271 am: 03 März, 2013, 01:19 »
BTW,
i'm afraid i'll then be looked up by some foreign hate fraction who knows, better keep a low profile lol
...there is no such fraction here, definitely!
We all, team and administration, would never ever tolerate anything like that, at all.

Jürgen
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #272 am: 03 März, 2013, 15:54 »
Zitat
We all, team and administration, would never ever tolerate anything like that, at all.
that's all i needed to know (ofcourse that should've been the 'not so serious mode' on, i'll remember that for next time :)

btw anyone here use the udp stuff? Recenly noticed (got reported too) that don't operate correct with multicast so tried to ammend that.
also someone else experience the w8 full/window mode issues reported here (tested at vmware without issues so cannot reproduce)..

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #273 am: 03 März, 2013, 21:27 »
ok thanks man it is now ok after installing all codec on the internet and i saw a notice about altering enhanced video render to vmr9 to solve this problem and it did so there is something wrong with the enhanced render
thanks again


best regards


Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #274 am: 03 März, 2013, 22:56 »
ok odd, this notice refer to smartdvb specifically or EVR at general with win8?

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #275 am: 04 März, 2013, 06:23 »
with smart dvb only cause progdvb working ok altdbv and dream dvb also dvbviewer

thanks

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #276 am: 04 März, 2013, 12:21 »
@ioosis: ok could you send me your settings.ini (through pm) i'll try to see if it's reproducable to me then. Should be located at c:\users\yourname\appdata\local\smartdvb\settings\settings.ini if normal install otherwise at ur program files installation folder..

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #277 am: 04 März, 2013, 14:06 »
ok i could not atach through pm anyway here is it

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #278 am: 04 März, 2013, 20:39 »
ok tx, i see u use LAV nd indeed when i try that i also see issues with windowed mode switch. I'll send you current build after tests coz it's important that EVR operates okay ofcourse coz it's the better renderer.

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #279 am: 04 März, 2013, 22:30 »
u've got pm ioosis with respect to the w8 lav issue (for me seems resolved)..

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #280 am: 05 März, 2013, 00:53 »
hi there

there with no problem with lav filter

beta 3 still does not work with enhanced video render it crashes  it works only with vmr9

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #281 am: 05 März, 2013, 00:59 »
with all codecs same issue u mean? If only LAV make sure u disable at 'tools>settings>directshow' options 'do not rebuild directshow graph' 'nd 'do not stop directshow graph with EVR' otherwise for me LAV also unstable..

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #282 am: 05 März, 2013, 01:14 »
no i mean it does not concern video render it works with lav arcsoft microsoft dtv nvidia only but when i change to enhanced video render it hangs

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB public beta 0.3.0
« Antwort #283 am: 05 März, 2013, 01:18 »
ok could you check the smartdvb.exe file version (properties for smartdvb.exe) to make sure it's 0.3.0.18 (at previous times sometimes the installer would not copy new versions correct, ritschibie encountered this, just to make sure this is not something related to that. But i don't think so so i'll need to look more at this, you know others who have this with w8 like u mentioned before, or others here still experience that?

Offline ioosis

  • Cubie
  • **
  • Beiträge: 45
Re: SmartDVB public beta 0.3.0
« Antwort #284 am: 05 März, 2013, 01:26 »
yes b3    3.0.18   
no i do not it seems that i am the only one facing enhanced video render problem may be it conerns the video adapter of gigabyte