Thema: Videoüberwachungssoftware

[SiLæncer]

Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Fix some minor ui bugs
    Close dialogs on back pressed
    Playback timing updates

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Update image resizing code (use more efficient algorithm)
    Add Use High Performance Resize option to system settings - playback which will use a very fast resizer but also will result in some loss of visual quality.
    Fixed an issue with the MJPEG internal decoder
    Fixed an issue with FFMPEG buffer alignment
    Added AI down and AI up events. These events are throttled to 1 every 60 seconds.
    Fixed issue with ONVIF PTZ configuration setup
    Added variable speed control to PTZ controller in digital and onvif modes.
    Gamepad and virtual joystick PTZ controls now support variable speed.

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Couple of UI bug fixes

4.8.5.0

    Add ffmpeg installer page
    Add markers for timelapse and regular recordings on timeline view
    Fix some minor bugs with PTZ controller

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Fix PTZ issue
    Playback optimizations
    Fix issue with 32 bit ARM download

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Increase download timeout for ffmpeg install

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Changelog

    Fix issue with reconnecting to some ONVIF event streams
    Add ability to add/ edit/ delete motion zone area configurations
    Add action to apply motion area configuration
    Add task to set PTZ presets on devices
    Added action to run when PTZ Preset is called
    (so you can apply motion detection areas based on PTZ preset)
    Add schedule actions to apply motion areas
    Update object tracking detectors to raise events in motion zone areas
    UI updates/ minor bug fixes
    Add option to local server to use SSL only
    Add change password to local users account menu
    Fix bug with loading in config when media location is unavailable resetting configuration (now logs error instead)
    Optimise resize of video when browser resized.
    Update userguide

[close]

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Update to stream resizer

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Fix issue with windows installer.

4.9.2.0

    Fix bug with duplicate alert events
    Fix bug with merging dates into json packets in actions

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Added new licensing model for the ‘Object Recognizer’ Additional module! Now, in addition to usual licenses for recognizing objects of the desired type (drones and airplanes / seabirds / people, vehicles, animals and others), this module will also accept a new, universal license that will allow you to use any type of objects you need. A new license is purchased for the number of cameras on the server that will use the “Object Recognizer” module multiplied by the number of different types of objects. See more in the Object Recognizer Setup Guide
    P2P: Added support for P2P connection in the ‘HTTP Upload to Other Xeoma‘ and ‘HTTP Receiver‘ modules.
    Preview and Archive: Added the new ‘Latest position (global)’ choice in the Xeoma Archive Viewer’s ‘Start position’ option. This new option will make it easier to watch archive recordings of an event across different cameras in Xeoma’s Archive Viewer since recordings will be starting playback in the same date and time spot.
    Preview and Archive: Improved view of archive recordings in Xeoma’s Archive Viewer after server restart. Now recordings will become available as soon as their own re-indexing is finished, so you do not have to wait until full re-indexing is completed.
    Accelerated auto search and addition of cameras.
    Accelerated the speed to Xeoma server start.
    Added the option to disable or enable attempts to match generic passwords with cameras during Xeoma’s auto search for cameras.
    Supported operating systems: Added support for HarmonyOS. You can download Xeoma for HarmonyOS from the Huawei AppGallery store or from our Download page.
    Rebranding: Added the new <Email> block to the rebranding/customization tool that can be used to embed information on where to send an email with a screenshot after the ‘Screenshot’ button is clicked, and to make this data protected from changing.
    Rebranding: Added the new ‘MessageTextColor’ and ‘MessageBackColor’ parameters to the rebranding/customization tool that can be used to change font color and background color for the warnings in the bottom right corner of camera’s preview boxes (for example, the system health messages from ‘Problems Detector’).
    Motion Detector: Added a new option to set the required accuracy level of the humans or cars recognition option in ‘Motion Detector’. This will help to fine tune the setting to match your environment and get rid of alarms caused by lower recognition accuracy.
    Parking Spots: Improved quality of work of the ‘Parking Spots’ and ‘HTTP Request Sender’ modules combination. Now the module can get and send information about the ‘Free’ status instead of just the ‘Occupied’ status.
    PTZ: Improved accuracy of camera rotation with the recently added ‘PTZ by click’ option.
    Xeoma Pro: Improved speed and smoothness of recordings playback in the simultaneous archive view mode.
    Mobile notifications: Fixed the issue where notifications from ‘Problems Detector‘ wouldn’t arrive in the ‘Mobile Notifications’ module.
    Preview and Archive: Improved smoothness and speed of playback at minimum speed in the Xeoma’s Archive Viewer (the so called frame-by-frame view).
    JSON API: Improved the search command that is used for camera search automation – now it displays an error when a camera couldn’t be added.
    Web Server: Fixed incorrect display of several checkboxes in Xeoma web interface when using a browser’s ‘white theme’.
    P2P: Fixed an issue with P2P connection to a server machine that uses an unusual certificate.
    Eliminated creation of excessive backup files for Xeoma settings by ‘Problems Detector’.
    Xeoma Pro Your Cloud: Fixed the issue with the MultiArchivePaths parameter (used to distribute user data across several folders or disks), where new information in this parameter wouldn’t apply after the first restart.
    Fixed authorization issues in ‘HTTP Marking’, “HTTP Switcher”, “HTTP Receiver”.
    QR Code Recognition: Fixed issues with false triggering and excessive lines in CSV reports by this module when QR code is nowhere in sight.
    Fixed the issue with interface elements overlaying each other in the ‘Active licenses’ dialog (Main menu -> Information -> Active licenses).
    Fixed the issue with the CTRL button getting ‘stuck’ after being used in the ‘Active licenses’ dialog, which resulted in interface scaling up or down whenever mouse wheel was used even outside of this dialog.
    Fixed the software crash that would happen at attempts to add a Dahua camera.
    Fixed operation of artificial intelligence options in ‘Motion Detector’, ‘Object Recognizer’, ‘Cross-Line Detector’, ‘Visitors Counter’, ‘Parking Spots’ modules. In old operating systems the modules would sometimes stop working after the Xeoma update, and in new UNIX-based systems Xeoma would sometimes display a false warning that a few more libraries were required for these features to function.

[close]

http://felenasoft.com/

[SiLæncer]

Whats new:>>

Fix for enabling GPU support on OSX
Faster downloads
Update to M3U8 streams (Nest)
Add MediaWriter DTS / PTS check

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Update UI

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Fixed operation of artificial intelligence options in the ‘Motion Detector’, ‘Object Recognizer’, ‘Cross-Line Detector’, ‘Visitors Counter’, ‘Parking Spots’ modules. Before the fix, there had been an issue that in old operating systems the modules would sometimes stop working after the Xeoma update, and in new UNIX-based systems Xeoma would sometimes display a false warning that a few more libraries were required for these features to function.

http://felenasoft.com/

[SiLæncer]

Whats new:>>

Fix bug with zone settings blocking actions when using simple detector

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Update UI
    Add support for upcoming Google Home integration

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Changelog

    Update UI - optimise mobile mode
    Add email with video option (with pre-event buffer)
    add photo option to actions and schedule
    Add default cloud upload provider
    Add ability to name actions
    Add support for other S3 providers (than just Amazon)
    Restructure the device editing menu and move some controls
    Fix issue with PTZ schedule editor when camera not active
    Copy more object recognition properties in device copier
    Add AI responses to debug logs
    Other bug fixes

[close]

https://www.ispyconnect.com/download.aspx#