Thema: Videoüberwachungssoftware

[SiLæncer]

Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Preview and Archive: New feature: when hovering the cursor over the timeline in Xeoma’s Archive Player, you will now get to see small thumbnails – mini preview pictures of some key frames within those episodes, much like when viewing a video on YouTube. Those mini previews will showcase key frames of the recording episode your mouse is hovering over, thus compressing hours of recordings into seconds to watch through.
    Remote Access: An easy way to connect – with a QR code – has been added for Android-powered devices. Now you can generate a QR code in Xeoma’s ‘Users’ dialog, which will contain all connection data needed to connect to that Server part of Xeoma from a Xeoma Client. Just scan the QR code with the special option in your Xeoma for Android app’s Connection Dialog (Main menu -> Remote access -> Connect to). The QR code will work for both ‘Administrator’ and a ‘User’ of Xeoma, with regular IP-address connection and with P2P connection.
    Support for hardware acceleration on AMD Radeon graphics cards has been added! Also, hardware acceleration used for decoding of camera video streams has been greatly improved in Windows and Linux systems using Intel processors or Nvidia graphics cards.
    Preview and Archive: A noise reduction option ‘Enable noise reduction’ has been added to the settings of the ‘Preview and Archive’ module. The option works with any audio types in Xeoma, and delivers clean sound even when the direct saving to the archive is used.
    Text Recognition: Special optimizations for working with meter readings have been added to the ‘Text Recognition’ module. To take advantage of this feature, check the new ‘Meter’ setting, and the module will switch to a mode optimized for working specifically with meters of various types (water, electric, natural gas ones, etc.).
    Face Recognition: A new option – ‘Use additional detection via MTCNN’ – has been added to the ‘Face Recognition’ module, which allows you to improve the quality of finding faces in the frame. The new option is compatible with both recognition algorithms (statistical analysis and AI). To enable the feature, check it and allow Xeoma to download additional materials for work. Please note that using this feature imposes additional CPU load.
    ANPR (License Plate Recognition): A new country – Iraq – has been added to the Additional package of enhanced ANPR, which adds up to the previously available North American, CIS countries, Jordan and Japan. This is the first time the Advanced ANPR option has support for Arabic symbols, too!
    Streaming to Youtube: The ‘Streaming to Youtube’ module now offers streaming to an alternative platform called RuTube. All you need is an rtmp link and the broadcast key from RuTube, and off your broadcast goes! See detailed guide here
    New feature: Notifications. A new item called ‘Notifications’ has been added to Main Menu -> Remote Access. Inside, you can configure the receipt of notifications on your mobile device when the connection to a Xeoma server or an external device is lost. Unlike Xeoma’s other module for system health monitoring – ‘Problem Detector’ that is also capable of detecting the occurrence of problems – ‘Notifications’ has the unique ability to send an alarm message when a Xeoma server stops working, for example, due to a power outage! Also, ‘Notifications’ will work even without connecting the ‘Mobile Notifications’ module to the chain. The only thing required is to give the Xeoma application on your mobile device permissions to show notifications the first time you connect to the Xeoma Server with the ‘Notifications’ feature.
    Device List: Search has been added to the ‘Groups’ dialog. Simply enter a camera’s IP address or name into the search box to find it in a matter of seconds. Besides, now there is a CTRL+G (CMD+G for Mac) hotkey to open the Groups pop up in any window, including Xeoma’s embedded Archive Player.
    New feature: autofocus. The new version of Xeoma offers the option to automatically check for loss of focus on cameras with ONVIF-facilitated support for PTZ, and attempt to return it. Find ‘Autofocus Settings’ in the ‘Universal Camera’ module settings and select one of the two options: ‘Autofocus based on image analysis’ which makes the program constantly check the camera scene for signs of defocusing, or ‘Autofocus at regular time interval’ to just make the camera focus back regularly at given intervals.
    QR Code Recognition: The pass list option has been added to the ‘QR Code Recognition’ module. With the new option, the module allows to create a ‘white list’ of codes to react to (or the other way around – make the system only react to codes not from the list). All you need to do is just enter the text behind the QR code into the ‘Whitelist the code below’ field and select the desired mode in the ‘Module reaction type’ drop-down menu.
    Search for DVRs that do not support ONVIF has been improved. Upon detection of such DVRs, the new version of Xeoma is able to add all its cameras, not just one as before.
    Problems Detector: The log file of the ‘Problems Detector’ module has been enhanced. Now, when the ‘Processor load’ is engaged, the log file will not just have an entry about the processor load being higher than the threshold you set, but also state the current CPU load in %.
    Xeoma Pro Trial edition: The ‘Search by motion’ (the search for motion within an area) has been added to the Trial version of the Xeoma Pro edition.
    webRTC: The advances of Xeoma’s webRTC are now available to ARM-based servers (with the ARMv7 or ARMv8 architecture). Since webRTC is the ultra contemporary way of streaming that allows to shift part of the camera processing load onto the web browser’s side, it is compact and less powerful machines such as ARM-powered micro computers that could benefit from it the most.
    Face Detector (Emotions): The new option to set up the range of face recognition has been added to the emotion recognition module. Set the maximum distance where the face is expected to appear with a ‘Range of face recognition’ slider to increase the accuracy with which the module detects faces and recognizes emotions. Please note that greater distances will yield higher processor load.
    The messages that Xeoma displays when the ‘Show camera information’ option is enabled in ‘Layouts’ -> ‘Visualization settings’ have been enhanced. Now, the information updates more frequently and includes incoming and outgoing network speed of Xeoma’s Server and Client part. Besides, the camera information will stay even if you switch to the Quick Settings (Single Camera view) Window or the Detailed Settings Window.
    A new launch parameter – -nosearchservers – has been added for the launch of Xeoma Client parts. This command will make Xeoma opt out of searching for any Xeoma servers in the network to connect to. The automatic search for Xeoma servers lists all found Xeoma Servers in the Connection Dialog, making selection of a server to connect easier for a security operator. But if required, it can now be refrained from with the new command.
    PTZ Presets, Tours: More time options have been added to the ‘Stay time’ option of the preset and tour setup dialog, so that now the pause before moving on to another preset can last up to 24 hours. See more about the setup of this Xeoma Pro feature
    Xeoma Pro Trial edition: The ‘Play ONVIF archive’ feature that has been previously added for viewing of the recordings from ONVIF-compliant cameras or DVRs directly in the Xeoma’s Archive Player, is now available for tests even in the Trial version of Xeoma Pro. See more about this feature
    HTTP Request Sender: More lines for parameters are now available in the ‘HTTP Request Sender’ module, which means that you can use as many parameters for the http command as you’d need now.
    Smoke Detector: A new advanced algorithm – ‘Smoke and fire detection with CUDA’ – has been added, which significantly increases the accuracy of smoke and fire detection. To begin using the new advanced recognition method, select the CUDA option from the dropdown ‘Working mode’ option and wait until the additional resources required for work are downloaded. Please note that a CUDA-supporting Nvidia graphics card is required.
    Text Recognition: New enhanced artificial intelligence algorithms have been added to the ‘Text Recognition’ module, which has resulted in significantly better text detection and reading.
    Face Recognition: A new recognition method – ‘Artificial intelligence using CNN (ConvNet)’ – has been added to the module’s ‘Face detection algorithm’ options. The new method is optimized to work with Asian face types resulting in higher accuracy of their recognition. This work method is available in Xeoma Pro and has basically the same conditions as the ‘Statistical analysis’ option, and does not summarize with other Face Recognition’s work methods (statistical analysis or artificial intelligence).
    The previously introduced ‘Freight Unloading Counter’ filter module that detects freight vehicles in the camera field of view and counts the ones that got unloaded, has been enhanced, which results in higher accuracy of recognition and counting.
    Cross-Line Detector: The ‘Cross-Line Detector’ module now allows to use separate reactions with each drawn line. It means that you can add all the needed reactions to the chain after ‘Cross-Line Detector’, then draw all required lines in the monitoring zone, and choose a reaction for each of them with the new ‘Selected line’ and ‘Destination filter’ elements underneath the zone.
    JSON API: Support for special characters (@ and %) in an Administrator’s password has been added for API commands.
    webRTC: Motion visualization has been added for viewing of webRTC streams through the web interface. Now, if you have webRTC enabled in your ‘Web Server’ module and use a ‘Motion Detector’, you can see green frames around moving objects in Xeoma’s web interface like you do when viewing cameras through a Xeoma Client.
    QR Code Recognition: Fixed the visualization of a recognized QR code. Now the frame around a detected QR code matches its size.
    Fixed gray distortions that would appear while shifting between the Single or Multi-Camera View and the Archive Player. See other reasons for gray distortions
    PTZ: Fixed an issue when PTZ control of cameras would not work in Xeoma if one of the cameras was going through a PTZ guard tour.
    Xeoma Pro Your Cloud: Fixed failing to record archives if an FTP Receiver was used as a video source for a video stream with sound.
    RTSP Broadcasting: Fixed an issue when ‘RTSP Broadcasting’ could fail to start working the first time it was added.
    Mobile Notifications: Enhanced landing into the archive after clicking on a mobile notification. Now the archive will open on an even more precise position, which will help you get straight to watching the needed episode.
    Fixed an issue where Xeoma that has been installed to autostart on Mac OSX systems would not ask for required permissions when recording to an external drive was selected.
    Fixed an issue with empty USB cameras being added to Xeoma during a search on Raspberry Pi 2 or Raspberry Pi 3 micro computers.
    HTTP Request Sender: Fixed incorrect length calculation in the Content-Length header of HTTP requests.
    Web interface: Fixed glitches of the archive player in Xeoma’s web interface that would appear when playing back webRTC archives of recordings with varying resolutions.
    Enhanced Xeoma’s feature to search for Xeoma servers from Xeoma Clients. Now it works for Xeoma servers that are located in different subnetworks than the Client.
    Fixed sound delay in Xeoma running on macOS machines with an M1 processor.
    Improved smoothness of m3u8 video streams in Xeoma.
    Fixed an issue in Detailed settings when modules would occasionally end up visually shuffled in a chain.
    Motion detector: Fixed the issue with ‘Motion Detector’ stopping working if switched from the ‘Detect only absence of motion during’ mode of work to the regular motion detection mode.
    Ubuntu: Fixed occasional crashes from using the ‘Screen Capture’ module on Ubuntu 22.04.
    Export: Windows OS: Fixed export fails if the folder path has a dot (‘.’) in the name.

[close]

http://felenasoft.com/

[SiLæncer]

ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- Disallow connecting multiple times to the same Camera
- Restart audio input device in case no audio data reaches us for 30s
- New settings menu entry to change IP/Host of a network camera
- Web interface works now well when embedded inside an iframe
- Added support for Lorex
- Updated internal web server to Apache 2.4.57 and PHP 8.2.10
  (Apache and PHP both with OpenSSL 3.1.2)
- Hardened Apache security by disabling the HTTP TRACE method
- Updated mailer program to mailsend-go v1.0.10

[close]

http://www.contaware.com/

[SiLæncer]

Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

fix dshow issue with devices with null name
install specific version of ffmpeg for OSX
try onvif events even if it says not supported
update ptz joystick controller

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Fix issue with color of AI overlays
Add overlays to alert images (when available)

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    UI updates
    Fix bug with audio permissions
    Fixed issue with case sensitivity for downloads on linux
    Added onvif discovery switch to settings
    Fixed issue with reconnecting record streams

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Update puppeteerSharp to resolve issue with web browser source type

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Fix issue uploading to SFTP on linux
    Remove some locks
    Update onvif talk

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Add support for channel parameter in reolink detector configuration
    Maximising streams now use low res until high res is connected
    Added motion search to filter options - https://www.ispyconnect.com/docs/agent/timeline#motion-search
    (will only work when using tracking object detectors or AI and with new recordings)
    Fix bug with account reset scripts
    Ensure tags are passed to start recording actions
    Translate connection based messages for logging

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Fix for bug with editing audio devices
    Updates to database
    Increase max buffer length to 60 seconds

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Add H265, VP8 and VP9 encoders to recording settings
    Rewrite GPU encoder code
    Add audio overlay in motion graphs
    Fix bug with recordingupdated event handler
    Optimise motion and audio graph data
    Add reolink motion channel support

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

Fix bug with skip to motion feature (playback error)

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Add Session Management to server menu (view current login sessions and terminate sessions).
    Add LDAP integration for logins via LDAP server
    GPU updates - fix issue with QSV Encoder. Add device and GPU recorder options to recording tab.
    Library upgrades
    UI bug fixes

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Update ffmpeg installer
    Add area name and detected zones to recording tags

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Fix issue with SFTP
    Add support for QSV Decoders
    Add option to UI menu to disable recording info
    Fix issue with VR controls
    Fix issue with adding camera to grid when using wizard
    Add set process priority to settings
    Send RTSP-BYE on stream close

https://www.ispyconnect.com/download.aspx#

[SiLæncer]

Whats new:>>

    Fix issue with motion graphs
    Add UI option to disable recording information popup
    Fix issue with VR controls
    Update to LDAP Active Directory integration
    Store minimum alert interval in profiles

https://www.ispyconnect.com/download.aspx#