Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Invalid domain check for JahaslistDao.importFile.
    System block list has been updated.
    User-agent string updated for internal web crawler.
    Baselist has been updated to 4934874.

[close]

https://www.nxfilter.org/

[SiLæncer]

SoftPerfect WiFi Guard is a tool for keeping a small WiFi network secure. It allows you to know immediately if your network is used without your knowledge. It's a specialized network scanner that runs through your network at set intervals and reports immediately if it has found any new connected devices that could possible belong to an intruder.

Freemium

Changelog

    Added: Online device recognition.
    Fixed: Partial MAC address matching.
    Fixed: Auto-scan feature now engages before the main window is displayed.
    Improved: Double-clicking a device web-page icon now opens the web browser.

[close]

http://www.softperfect.com/products/wifiguard/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    Rose-storage - moved SMB service to the RouterOS bundle;
    Smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service, compatible with SMB 2.1, SMB 3.0 and SMB 3.1.1);
    Bridge - fixed MLAG connection after peer-link flap (introduced in v7.13);
    Bridge - fixed MLAG connection issues due to STP (introduced in v7.14beta3);
    Bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13);
    Bridge - fixed port mst-override status (introduced in v7.14beta3);
    Defconf - improved wifi interface detection after upgrade;
    Lte - added redial timer when the MBIM modem fails to register or does not receive APN activation notification;
    Ovpn - improved "push-routes" option handling when large amount of routes is specified;
    Sms - increased SMS read timeout;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

This application features a collection of tools that target IP-related tasks, allowing one to easily send pings, perform check-ups, and monitor individual or multiple IPs.

License: MPL

https://decontev.com/#

[SiLæncer]

IP-Sniffer is a small command line tool that captures the IP traffic for a given network adapter. The tool is available for Windows and Linux systems. By using of protocol-, IP-address- and/or IP-port-filters a very special IP-traffic can be captured. An integrated Interprocess-Communication (IPC) client allows forwarding the filtered IP-traffic to other applications which run on the same system, e.g. the decontev IP-Proxy tool. (btw. IP-Proxy can be used to then forward this data to remote sites.) Additionally it can be set whether only the payload data or the entire IP-Frame shall be forwarded. Several filters can be defined and activated at the same time and for each of these filters a separate IPC channel can be opened. For easier and fast definition of filters an own configuration tool is provided.

License: MPL

https://decontev.com/#

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

New features

    Improved logging.
    Updated NetLimiter API for better compatibility.
    Improved styling: rounded borders in menus, in the treeview and in other parts; checkboxes
    Other minor fixes in UI and elsewhere.

Fixed bugs

    Many minor fixes.

[close]

Download: Klick

http://www.netlimiter.com/

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

    GUI:

    Add GNS3 console command "env" to show what environment variables are used. Ref GNS3/gns3-server
    Add CTRL+C shortcut to copy status bar message.
    Key modifier (ALT) to ignore snap to grid.
    Increase timeout to 5s for status bar messages. The coordinates message has no timeout and can be reset when clicking on the scene.
    Add reset GUI state feature.
    Fix for hiding Windows terminal.
    Drop support for Python 3.6
    Upgrade sentry-sdk, psutil and distro dependencies

    Server:

    Bundle web-ui v2.2.46
    Save empty directories when exporting a project
    Backport from v3: install Docker resources in a writable location at runtime.
    Use Docker API v1.24 to get version.
    Drop support for Python 3.6
    Address the telnet console bug.
    Update welcome.py
    Update remote-install.sh
    Use Python 3.8 to publish API doc
    Upgrade sentry-sdk, psutil and distro dependencies

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

Whats new:>>

    Lte - improved FG621-EA modem firmware upgrade;
    Ovpn - limit the maximum length for "push-routes" up to 1400 characters;
    Sstp - added support for "aes256-gcm-sha384" encryption;

http://www.mikrotik.com/thedude.php

[SiLæncer]

Whats new:>>

    Route - use correct routing table for addresses on VRF interface (introduced in v7.14beta3);
    Smb - fixed export with default configuration (introduced in v7.14beta7);

http://www.mikrotik.com/thedude.php

[SiLæncer]

Wireless Network Watcher is a small utility that scans your wireless network and displays the list of all computers and devices that are currently connected to your network. For every computer or device that is connected to your network, the following information is displayed: IP address, MAC address, the company that manufactured the network card, and optionally the computer name. You can also export the connected devices list into html/xml/csv/text file, or copy the list to the clipboard and then paste into Excel or other spreadsheet application.

Freeware

Whats new: >>

Added 'Scan IPv6 Addresses' option. You can turn it off if you don't need the IPv6 Addresses information.

https://www.nirsoft.net/utils/wireless_network_watcher.html

[SiLæncer]

Changelog

!) rose-storage - moved SMB service to the RouterOS bundle;
!) smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service, compatible with SMB 2.1, SMB 3.0 and SMB 3.1.1);
*) 6to4 - make "ipsec-secret" sensitive parameter;
*) api - improved REST API stability when processing invalid requests;
*) api - properly return SNMP OIDs when requested;
*) arm - improved system stability when using microSD on RB1100Dx4;
*) arp - added ARP status;
*) bgp - allow to leak routes between local VRFs;
*) bridge - added MLAG support for MSTP bridges;
*) bridge - avoid per-VLAN host flushing on HW offloaded bridge;
*) bridge - fixed auto "path-cost" for bonding interfaces (introduced in v7.13);
*) bridge - fixed MLAG connection after peer-link flap (introduced in v7.13);
*) bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13);
*) bridge - improved bridge VLAN configuration validation;
*) bridge - improved configuration speed on large VLAN setups;
*) bridge - improved protocol-mode MSTP functionality;
*) bridge - improved protocol-mode STP and RSTP functionality;
*) bridge - make "point-to-point=yes" default value for non-wireless bridge ports;
*) bridge - removed "mst-config-digest" from MSTI menu;
*) bridge - try to set wireless bridge ports as edge ports automatically;
*) bth - added simple "Back To Home Users" manager under IP/Cloud menu;
*) calea - improved system stability when adding bridge rule without "calea" package installed;
*) certificate - improved certificate validation performance;
*) console - added ":tolf" and ":tocrlf" commands for converting line break to/from LF or CRLF;
*) console - added "show-at-cli-login" option to display a note before telnet login;
*) console - added missing "where" clause for "/ipv6/firewall/filter" table print command;
*) console - do not accept negative or too large values for ":delay" command;
*) console - do not allow to use out-of-range values for time type fields;
*) console - fix configuration export when user does not have a "sniff" policy;
*) console - fixed delayed output from ":grep" command in certain cases;
*) console - fixed incorrect behavior of ":onerror" command in certain cases;
*) console - hint on reset command help that ".rsc file" is required for "run-after-reset" parameter;
*) console - improved editor functionality in full screen mode;
*) console - improved stability when using autocomplete with "export";
*) console - increased maximum file content length that can be managed through command line to 60 KB;
*) console - updated copyright notice;
*) container - improved VETH interface management responsiveness and reliability;
*) container - restrict "/container/shell" menu for users without "write" permissions;
*) defconf - added log about configuration reset due to pressed reset button;
*) defconf - fixed Audience scanning-for-wps-ap timeout;
*) defconf - fixed configuration script on KNOT devices if "ppp-out" interface is removed;
*) defconf - fixed firewall rule for IPv6 UDP traceroute;
*) defconf - fixed wifi configuration if interface MAC address is changed;
*) defconf - improved wifi interface detection after upgrade;
*) defconf - increased LTE interface wait time;
*) defconf - updated health settings on configuration revert;
*) defconf - use "fq_codel" queue as default interface queue for wired ports on LTE devices;
*) dhcpv6-client - install dynamic IPv6 blackhole routes in corresponding routing-table;
*) dhcpv6-client - updated error logging when multiple prefixes received on renew;
*) disk - added exFAT and NTFS mount/read/write support;
*) disk - added global disk "settings" menu;
*) disk - fixed changing settings on some GPT formatted disks;
*) disk - properly unmount disk when it is disconnected;
*) dns - do not add new entries to cache if "cache-size" is reached;
*) dns - fixed domain name lookup resolving for internal services;
*) ethernet - fixed issue with default interface names for CRS310-8G+2S+ in rare cases;
*) ethernet - improved cable-test reliability for hAP ax3 PoE out port;
*) ethernet - resolved minor memory leak while processing packets;
*) fetch - added "head" option for "http-method";
*) fetch - added "patch" option for "http-method";
*) fetch - allow specifying link-local address in FTP mode;
*) fetch - allow to use certificate and check-certificate parameters only in HTTPS mode;
*) fetch - do not require "content-length" for HTTP (introduced in v7.13);
*) fetch - fixed DNS resolving when domain has only AAAA entries (introduced in v7.13);
*) fetch - fixed fetch execution when unexpected data is received in HTTP payload;
*) fetch - fixed fetch when using "src-path" with HTTP/HTTPS modes (introduced in v7.13);
*) fetch - fixed fetch when using "src-path" with SFTP mode (introduced in v7.13);
*) fetch - fixed incorrect "src-path" error message when "upload=yes";
*) fetch - fixed IPv4 address logging (introduced in v7.13);
*) fetch - improved fetch stability in SFTP mode;
*) fetch - improved file download stability with HTTP/HTTPS modes;
*) fetch - less verbose logging;
*) fetch - print all "Set-Cookies" headers in response;
*) fetch - treat any 2xx HTTP return code as success (introduced in v7.13);
*) filesystem - improved filesystem integrity for several RB3011 units with automatic firmware upgrade;
*) firewall - added "creation-time" parameter for IPv6 address list entries;
*) firewall - fixed underlying CAPsMAN tunnel reusing packet marks of encapsulated packets;
*) firewall - fixed underlying VXLAN/EoIP tunnel reusing packet marks of encapsulated packets;
*) firewall - increased default "udp-timeout" value from 10s to 30s;
*) health - added limited manual control over fans for CCR1016r2, CCR1036r2 devices;
*) health - changed default "fan-min-speed-percent" from 0% to 12%;
*) health - improved fan control on CRS3xx and CCR1016-12S-1S+r2;
*) health - show voltage when powering KNOT R through Micro-USB;
*) health - updated health properties for CCR1016r2, CCR1036r2 devices;
*) iot - added bluetooth whitelist wildcard asterisk support;
*) iot - added LoRa CUPs protocol support;
*) iot - fixed modbus partial frame reception issue;
*) iot - improved LoRa LNS;
*) iot - improved modbus Tx/Rx switching behaviour;
*) iot - improvements to GPIO behavior on boot;
*) iot - improvements to LoRa CUPS;
*) iot - removed bluetooth whitelist maximum entry limit of 8;
*) ipv6 - made "valid" and "lifetime" parameters dynamic for SLAAC IPv6 addresses;
*) isis - show passive interface active levels;
*) l3hw - fixed IPv6 host offloading in certain cases;
*) l3hw - fixed neighbor offloading after link flap;
*) l3hw - preserve offloading for VLANs when bridge ports are down;
*) leds - added "dark-mode" functionality for hAP ax3 and Chateau ax series devices;
*) leds - do not show LTE connection state/mode using RGB power LED from configless LTE modems;
*) leds - fixed "type=on" LED behaviour after reboot;
*) leds - fixed default LTE LED configuration for wAPR-2nD;
*) leds - fixed modem LED indication for SXT LTE 3-7;
*) leds - fixed wireless type of LED triggers for routers using WiFi package;
*) lte - added "at-chat" support for Sierra Wireless EM9293 5G modem;
*) lte - added AT channel support for Quectel EM120K-GL modem;
*) lte - added redial timer when the MBIM modem fails to register or does not receive APN activation notification;
*) lte - don't duplicate primary band in 5G SA mode for chateau 5G;
*) lte - fixed "use-peer-dns" setting for EC200A modem;
*) lte - fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address;
*) lte - fixed APN authentication for FG621-EA modem;
*) lte - fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13);
*) lte - fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions;
*) lte - fixed Simcom modem support in 0x9001 USB composition;
*) lte - fixed support for config-less modem detection (introduced in v7.13);
*) lte - fixed USB mode switch and initialization race condition for configless USB modems;
*) lte - improved FG621-EA modem firmware upgrade;
*) lte - improved modem recovery after failed IPv4 configuration;
*) lte - improved support for "ACER" and "MSFT" branded EM12-G modems;
*) lte - optimized "at-chat" response reading;
*) lte - refactored AT command control for AT modems;
*) modem - fixed SMS removal (introduced in v7.13);
*) modem - improved stability when performing modem FOTA upgrade;
*) mpls - fixed VPN fragmentation when forwarding IP traffic;
*) netinstall-cli - check package and device architecture before formatting;
*) ovpn - added support for pushing routes;
*) ovpn - improved "push-routes" option handling when large amount of routes is specified;
*) ovpn - improved key-renegotiation process;
*) ovpn - improved OVPN configuration file import process;
*) ovpn - improved system stability when using HW encryption on ARM64 devices (introduced in v7.13);
*) ovpn - limit the maximum length for "push-routes" up to 1400 characters;
*) package - added "size" property;
*) package - reduced "wireless" package size for ARM, ARM64, MIPSBE, MMIPS devices;
*) package - reduced package size for SMIPS;
*) poe-out - driver optimization for AF/AT controlled boards;
*) poe-out - fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13);
*) poe-out - improved 802.3at classification and measurement accuracy;
*) poe-out - improved cable test for hAP ac3 and hAP ax3 devices;
*) poe-out - improved PoE out reliability on routers with a single PoE out interface;
*) port - fixed support for USB/serial adapters (introduced in v7.13);
*) port - removed bogus serial port on RB750Gr3, RB760iGS and RBM11G devices;
*) ppp - added support for "WISPr-Session-Terminate-Time" RADIUS attribute;
*) ppp - log an error when IPv6 DHCP pool is exhausted;
*) ptp - added "aes67" and "smpte" profiles;
*) ptp - added configurable "domain" and "priority2" parameters;
*) ptp - added support for Management message forwarding in BC;
*) ptp - fixed "default" and "g8275.1" profiles go into "slave" instead of "uncalibrated" state;
*) ptp - fixed default values for "802.1as" profile;
*) ptp - fixed flags in Announce message;
*) ptp - fixed potential error in packet exchange;
*) ptp - make clock go into grandmaster state if slave port goes down;
*) qos-hw - fixed "tx-queue7-packet" counter;
*) route - fixed gateways of locally imported vpnv4 routes;
*) route - improved route print "count-only" process speed;
*) route - improved stability on route table lookup;
*) route-filter - added option to set "isis-ext-metric";
*) route-filter - fixed AS path matchers when input and output chains are used;
*) routerboard - added "reset-button" support for RBwAPR-2nD device;
*) sfp - added support for modules requiring single byte I2C read transactions;
*) sfp - fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;
*) sfp - fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases;
*) sfp - improve high-power SFP module initialization;
*) sfp - improved combo-sfp handling for CRS328-4C-20S-4S+;
*) sfp - improved link establishment for RB4011 devices;
*) smb - added option to specify SMB service mode as "auto";
*) sms - fixed SMS inbox for FG621-EA modem (introduced in v7.13);
*) sms - fixed SMS sending from WinBox and WebFig (introduced in v7.13);
*) sms - improved system stability when working with SMS;
*) sms - increased SMS read timeout;
*) snmp - added "bgpLocalAs" and "bgpIdentifier" OID reporting;
*) snmp - fixed "bgpPeerFsmEstablishedTime" OID reporting;
*) snmp - hide "MikroTik" in LLDP MIB when branding with hide SNMP option is used;
*) snmp - updated timeout log;
*) ssh - improved SSH performance on ARM, MIPS, MMIPS, SMIPS and TILE devices;
*) ssh - refactored SSH service internal processes;
*) sstp - added support for "aes256-gcm-sha384" encryption;
*) sstp - improved system stability for PPC devices;
*) supout - added PTP section;
*) switch - fixed Ethernet disable/enable for CRS310-8G+2S+ devices;
*) switch - fixed reserved multicast receive on Atheros-8327, QCA8337 switches for R/STP bridge;
*) switch - improved 100G interface stability for 98DX4310 and 98DX8525 switches;
*) switch - minimise potential packet overflows on CRS354;
*) system - changed build time format according to ISO standard;
*) system - expose "lo" and "vrf" interfaces;
*) system - fixed "cpu-frequency" for CRS3xx ARM devices;
*) system - improved memory allocation for ARM64 devices;
*) system - improved RAM allocation for L009UiGS-RM;
*) system - improved system stability when processing packets in FastPath (introduced in v7.13);
*) system - properly assign destination port for HTTP/S connections initiated by the router (introduced in v7.13);
*) system - properly close HTTP/S connections initiated by the router;
*) system - provide more precise "total-memory" value for ARM devices;
*) system - provide more precise "total-memory" value under "System/Resources" menu for L009 and hAP ax lite routers;
*) tftp - improved invalid request processing;
*) timezone - updated timezone information from "tzdata2023d" release;
*) tr069 - don't duplicate cellular info in "X_MIKROTIK_5G" nodes when connected in NR SA mode;
*) tr069 - fixed bandwidth test;
*) tr069-client - show 5G signal info in X_MIKROTIK_5G nodes only for 5G NSA bands;
*) traffic-flow - use 64bit counters for v9 and IPFIX flows;
*) traffic-generator - improved system stability when receiving bogus traffic;
*) usb - show "Supermicro CDC" adapter as Ethernet interface;
*) vlan - fixed non-running VLAN interface after failed MTU change;
*) vrf - prevent VRF interface name collision with interface lists;
*) vxlan - fixed underlying tunnel reusing routing marks of encapsulated packets;
*) webfig - fixed routing table filter under "IP/Routes" menu;
*) webfig - fixed setting the user's password;
*) webfig - fixed showing WireGuard peers;
*) webfig - improved stability when adding new entries under "IP/Routes" menu;
*) wifi - added "station-pseudobridge" interface mode;
*) wifi - fixed issue with setting country profile (introduced in v7.13.1);
*) wifi - improved handling of CAP connections in dual CAPsMAN scenario;
*) wifi - increased value for SAE retransmit period to 3s to improve WPA3 compatibility with IoT client devices;
*) wifi - use "Latvia" as the default value for "country" property;
*) wifi - use correct CAP identity for interface name provisioning after it has been changed by remote-cap/set-identity;
*) wifi-qcom - enable display of regulatory information on L11,L22 devices;
*) wifi-qcom - fixed new connections, when maximum supported number of MAC addresses behind connected station-bridges is reached;
*) wifi-qcom - improve system stability for L11, L22 devices;
*) wifi-qcom - improved memory allocating process;
*) wifi-qcom - improved regulatory compliance for L11, L22 devices;
*) wifi-qcom - improved system stability when using FastPath (introduced in v7.13);
*) winbox - added "accept-protocol-version" parameter to the L2TP server settings;
*) winbox - added "mode-button" and "switch" menus for L41G-2axD&FG621-EA;
*) winbox - added "Name" parameter under "Tools/Netwatch" menu;
*) winbox - added "page-refresh" setting to the Graphing settings;
*) winbox - added "Port Cost Mode" setting under "Bridge" menu;
*) winbox - added "VRF" parameter under "Tools/Ping" menu;
*) winbox - added "x25519" argument for "DH Group" parameter under "IP/IPsec/Profiles" menu;
*) winbox - added missing "Protocol" arguments under "IPv6/Firewall" menu;
*) winbox - added missing monitoring properties under "WireGuard/Peers" menu;
*) winbox - added Preboot Etherboot settings to the System/RouterBOARD/Settings menu;
*) winbox - do not show USB settings for CRS devices that does not need it;
*) winbox - fixed "Bridge Cost" range under "Interfaces/VPLS" menu;
*) winbox - fixed "Password" button under "Quick Set" menu;
*) winbox - improved connection speed and reliability;
*) winbox - improved route table automatic refresh process for static routes;
*) winbox - improved status values under "System/PTP" menu;
*) winbox - improved system stability with large packets;
*) winbox - include "te-tunnel" parameter in VPLS interface monitor;
*) winbox - properly validate "passthrough-subnet-size" in the LTE APN settings;
*) winbox - remove "Root Bridge ID" property under "Bridge/MSTIs" menu;
*) winbox - removed "sfp all" option from combo port settings;
*) winbox - renamed "Wireless Table" menu to "Wifi";
*) winbox - show "routing-table" column under IP/Route menu by default;
*) winbox - show all columns under "Routing/PIM SM/Static RP" menu by default;
*) wireguard - do not allow to use multiple WireGuard interfaces on the same "listen-port";
*) wireguard - optimised and improved WireGuard service logging;
*) x86 - fixed VLAN tagged packet transmit for igb (introduced in v7.12);

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Wi-Fi Filter Tool is a lightweight application that provides a quick way to manage the wireless networks from home, work, public places and other travel locations.

Donationware

Whats new:>>

    [ FIXED ] – Spaces at beginning and end of wireless network name cause error.
    [ FIXED ] – A small Translation error.
    [ ADDED ] – Ability to sort the list by pressing on the columns header in the list.
    [ ADDED ] – Switching to white listed will add the previously used wireless network.
    [ ADDED ] – The interface has been slightly enlarged.
    [ ADDED ] – Some code Improvements.

https://www.sordum.org/16523/wi-fi-filter-tool-v1-0/

[SiLæncer]

Changelog

    system - added support for AMPERE (R) hardware (new ARM64 ISO file, new ARM64 extra-nics.npk package);
    bgp - fixed prefix count when BGP sessions run with multiple AFIs;
    bgp-vpn - use VRF interface as gateway for leaked connected routes;
    branding - added option to hide default configuration prompt;
    branding - added option to hide or replace default caps-mode-script;
    bridge - added MVRP support (CLI only);
    bridge - rename monitor property "path-cost" to "actual-path-cost";
    certificate - added trusted parameter for certificate import;
    chr - allow to "generate-new-id" only while CHR is running on level "free" license;
    console - added "proplist" parameter to interactive commands;
    console - added "type" parameter to ":resolve" command;
    console - added "use-script-permissions" option when running scripts from CLI;
    console - added hotkey "F8" to print entire multiline input;
    console - added log for script execution failures;
    console - added option to get "about" value (dynamically created text field by RouterOS services like CAPsMAN);
    console - added option to read and change file line endings in full-screen editor;
    console - added warning log for modified filenames due to reserved characters;
    console - do not convert string to array in ":deserialize" command;
    console - fixed ":onerror" behavior when "do" block is missing;
    console - fixed "export where" functionality in certain menus;
    console - fixed console prompt when entering hot lock mode with "F7";
    console - fixed do/while implementation not working with variables (introduced in v7.14);
    console - fixed filtering by "dhcp" flag in "/ip/arp" menu;
    console - fixed multiple typos in help;
    console - optimized configuration export to prevent startup of processes without any configuration;
    console - replace reserved characters to backup and certificate export file names with underscores;
    console - show system note before serial login if enabled;
    console - use user permissions when running scripts from WinBox and WebFig;
    discovery - added LLDP MAC/PHY Configuration/Status TLV support;
    discovery - added LLDP Maximum Frame Size TLV support;
    discovery - added LLDP Port Description TLV support;
    discovery - advertise only physical interface name for LLDP PortID TLV;
    discovery - always send LLDP MED Power TLV if MED was received;
    discovery - fixed high CPU utilization when "tx-only" mode is set;
    discovery - optimized LLDP information update;
    disk - added option to auto configure media sharing;
    disk - added support for formatting exfat file-system;
    disk - improved support for formatting ext4 file-system;
    dns - added support for "adlist";
    dns - added VRF support (CLI only);
    dns - improved system stability when caching entries;
    ethernet - fixed management port disable/enable on CCR2004-1G-12S+2XS, CCR2004-1G-2XS-PCIe, CCR2216, CCR2116 devices;
    file - allow adding and renaming files and directories;
    health - added log for fan state changes on CRS3xx, CRS5xx, CCR2xxx, CCR1016r2, CCR1036r2 devices;
    install - cdrom and hdd install images contain additional packages that can be interactively selected;
    lte - apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G;
    lte - fixed R11e-LTE-US modem dial-up;
    media - added support for DLNA;
    modem - send APN authentication for BG77 modem also if ppp-client interface created manually;
    poe-out - added LLDP power management support for devices with single PoE-out port;
    poe-out - fixed powering devices if input voltage is lower than 12V for hEX PoE (introduced in v7.9);
    poe-out - moved "PoE LLDP" property from "/interface/ethernet/poe" to "/ip/neighbor/discovery-settings" and enable it by default;
    ppp - added "Mikrotik-IPV6-Stats-Prefix" option for RADIUS "Delegated-IPv6-Prefix" account by using statistics from dynamic queues;
    ppp - added log when disconnecting a client due to "WISPr-Session-Terminate-Time" RADIUS attribute;
    ppp - fixed "on-down" script running even when tunnel was not up;
    profiler - added "neighbor-discovery" task;
    qos-hw - added congestion avoidance support for 98DX8xxx, 98DX4xxx, 98DX325x switch chips (CLI only);
    qos-hw - added ECN marking support for compatible switches;
    qos-hw - added support for QoS profile assignment via ACL rules;
    qos-hw - added WRED support for compatible switches;
    radius - added "require-message-auth" option that requires "Message-Authenticator" in received Access-Accept/Challenge/Reject messages;
    radius - include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services;
    route - do not allow routes with empty "dst-address";
    route - fixed bgp-vpn prefix import with the same route distinguisher (RD);
    route - improved system stability;
    route - show route-distinguisher (RD) in route print;
    route-filter - fixed ext community list matcher;
    sfp - added "100M-baseFX" link mode support for compatible devices;
    sfp - added "sfp-ignore-rx-los" setting;
    sfp - fixed link establishment with 100Mbps optical modules (requires "/interface ethernet reset" or adding "100M-baseFX" modes for advertise or speed properties);
    sfp - fixed missing Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;
    sfp - ignore SFP RX LOS signal for modules with bad EEPROM;
    sfp - improved "sfp-tx-power" value monitoring in certain cases;
    sms - added option to select SMS storage;
    sms - added SMS PDU to SMS inbox "print detail";
    sms - improved SMS handling;
    sms - use "gsm" logging topic for serial modem SMS logs;
    ssh - added passphrase option for host key export;
    ssh - added support for user Ed25519 private keys;
    ssh - export host Ed25519 public key;
    ssh - fixed permissions to run ".auto.rsc" scripts;
    ssh - removed RSA flag for user SSH keys;
    ssh - show key type and key length for user SSH keys;
    sstp - disconnect clients when server is disabled;
    switch - added support for multiple ingress and egress port mirroring on 98DXxxxx switches;
    switch - added support for RSPAN mirroring on 98DXxxxx switches;
    switch - fixed L3HW and QoS monitor during switch reset;
    system - added resource values (Product name, File name and File version) for Windows executable files;
    traffic-flow - detect IPv4 source address if not set;
    userman - added "require-message-auth" option that requires "Message-Authenticator" in received Access-Request messages;
    userman - include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services;
    vlan - ensure that VLAN MTU remains unchanged when adjustments are made to the parent interface MTU, only modifications to the L2MTU might impact VLAN MTU;
    vlan - fixed MTU reset on bridge after reboot;
    wifi - do not report disabled state for CAPsMAN managed interface;
    wifi - fixed configuration export for "disabled" property;
    wifi - improve channel selection after radar detection events;
    wifi - rename "available-channels" parameter to "channel-priorities" and include desirability rating for each channel;
    wifi - report current CAPsMAN address and identity on CAP;
    winbox - added "Download" and "Flush" buttons under "System/Certificates/CRL" menu;
    winbox - added "Flat Snoop" button under "WiFi" menu;
    winbox - added "Request logout" button under "System/Users/Active Users" menu;
    winbox - added "Trusted" checkbox under "System/Certificates/Import" menu;
    winbox - added invalid flag under "IP/DHCP Relay" menu;
    winbox - added missing SFP monitoring properties under "Interface/SFP" menu;
    winbox - allow to specify "M" or "G" postfix for download, upload or total limits under "User Manager/Limitations" menu;
    winbox - show "Valid Servers" and "Unknown Servers" column by default under "IP/DHCP Server/Alerts" menu;
    winbox - show SIM settings for SXTR device under "Interfaces/LTE/Modem" menu;
    wireguard - added peer "tag" field and display it in logs;
    wireguard - fixed "auto" argument usage for "private-key" and "preshared-key" settings;
    x86 - fixed ixgbe Tx hang by disabling TSO;
    x86 - ice driver update to v1.13.7;
    x86 - ixgbe driver update to 5.19.9;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Whats new:>>

    'Same as work-time policy' for free-time policy setup added on SandWatch.
    Breadcrumb link has been added for easier navigation on SandWatch.
    Tumblr and Blogspot HTTPS check has beed added for BlocklisUpdate.
    Log4j has been replace by Reload4j.
    Baselist has been updated to 5034874.

https://www.nxfilter.org/

[SiLæncer]

NetBIOS-, SNMP- und TCP/IP-Scanner; überprüft unter anderem die Erreichbarkeit von Host-Rechnern und zeigt die verschiedenen Typen von Dateien an, die im Netzwerk ausgetauscht werden; unterstützt Wake On LAN und das ferngesteuerte Herunterfahren von Rechnern im Netzwerk.

Shareware

Changelog

    Added: Enhanced device recognition through online queries.
    Added: Instant multi-value matching filter implemented as regex.
    Improved: Shorter timeouts for FTP probing, host name resolution, and WMI.
    Improved: Retention of host names post-IP conversion.
    Improved: WQL editor shows sample WMI data for root namespaces and children.
    Improved: Main window title now shows current user's admin status.
    Fixed: Issue with assigning friendly names for multiple keys.

[close]

https://www.softperfect.com/products/networkscanner/