Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

InternetTest is a small multi-tool for checking internet connection status and more.

You can easily verify if a specific site is down and then navigate to it through the Down Detector function. You can also check an IP location in-app via OpenStreetMap, Bing Maps, or Google Maps. It will also provide you with a connection history displayed on the right side of the simple interface.

These actions can be performed manually, but InternetTest groups them together, making them easily accessible without unnecessary navigation.

Requires Microsoft .NET to run this app.

License: Open Source

Changelog

Updated Simplified Chinese translation

[close]

https://github.com/Leo-Corporation/InternetTest

[SiLæncer]

Packet Sender is an intuitive and very simple to handle piece of software created to assist you in sending as well as receiving TCP and UDP packets to a preferred address in your network.

License: Donationware (GPLv2)

Changelog

    This update covers these underlying libraries:

    Universal (Native ARM) binaries for Mac! It's finally here!
    OpenSSL updated to 3.0.7 for Windows. This also uses the new Apache License, which does not require direct mentions.
    Qt updated to 6.5.2 for Windows and Mac. This should improve 4K rendering.

    There is one new feature update:

    The Intense Traffic Generator CLI is now threaded and much faster (Windows and Mac only)

[close]

https://packetsender.com/

[SiLæncer]

This application features a collection of tools that target IP-related tasks, allowing one to easily send pings, perform check-ups, and monitor individual or multiple IPs.

License: MPL

https://decontev.com/#

[SiLæncer]

IP-Sniffer is a small command line tool that captures the IP traffic for a given network adapter. The tool is available for Windows and Linux systems. By using of protocol-, IP-address- and/or IP-port-filters a very special IP-traffic can be captured. An integrated Interprocess-Communication (IPC) client allows forwarding the filtered IP-traffic to other applications which run on the same system, e.g. the decontev IP-Proxy tool. (btw. IP-Proxy can be used to then forward this data to remote sites.) Additionally it can be set whether only the payload data or the entire IP-Frame shall be forwarded. Several filters can be defined and activated at the same time and for each of these filters a separate IPC channel can be opened. For easier and fast definition of filters an own configuration tool is provided.

License: MPL

https://decontev.com/#

[SiLæncer]

Was ist neu : >>

Fixed a crash issue with WiFi Networks page.

https://github.com/Leo-Corporation/InternetTest

[SiLæncer]

Axence nVision Free is the lite version of Axence nVision Pro with mapping and monitoring of unlimited devices and basic features including user monitoring, inventory taking, helpdesk, and device access control.

You can use it as a network discovery tool for scanning, discovering connected systems and devices, and it also will list their TCP/IP services. You can then create network maps for a visual aid. But that is not all, Axence nVision Free will also monitor your system in the event that a host is down, or a service has failed, it can also let you know if CPU utilization is high and can notify you via email or desktop alert if a new system has connected to the network keeping you fully apprised of all aspects of your network.

This free version does include:

Network discovery and visualization
nVision Server: network scanning, detection of devices and TCP/IP services, web access with browser
Network monitoring
Unlimited number of monitored devices
TCP/IP services: response time and correctness, packets received/lost statistics (PING, SMB, HTTP, POP3, SNMP, IMAP, SQL, etc.)
WMI counters: CPU load, memory usage, disk usage, network traffic, etc.
SNMP v1/2/3 counters: network traffic, temperature, humidity, power supply voltage, toner level, etc.
File distribution with use of WMI
MIB file compiler
Alerts and reports
Event/action alarms for network monitoring and SNMP and WMI counters
Notifications (on desktop, by e-mail, by SMS) and repair actions (program launch, computer restart, etc.)
Reports (for user, device, branch, network maps or entire atlas)
Hardware and software inventory
List of applications and Windows updates on single workstation (registry)
Software serial numbers (keys)
Overview of workstation hardware
System info (startup commands, user accounts, shared folders, SMART details, etc.)
User activity monitoring
User activity overview
Top 10 of visited web pages
And much more.

[close]

 Freemium

Free for up to 10 devices

Whats new:>>

New features:

[SecureTeam] Export user list to import file for Axence SecureTeam with group and supervisor information.

https://axence.net/en/

[SiLæncer]

WifiInfoView scans the wireless networks in your area and displays extensive information about them, including: Network Name (SSID), MAC Address, PHY Type (802.11g or 802.11n), RSSI, Signal Quality, Frequency, Channel Number, Maximum Speed, Company Name, Router Model and Router Name (Only for routers that provides this information), and more...

When you select a wireless network in the upper pane of this tool, the lower pane displays the Wi-Fi information elements received from this device, in hexadecimal format.

WifiInfoView also has a summary mode, which displays a summary of all detected wireless networks, grouped by channel number, company that manufactured the router, PHY type, or the maximum speed.

License: Freeware

What's new: >>

Fixed to detect 160 MHz bandwidth correctly for 5GHz access points.

https://www.nirsoft.net/utils/wifi_information_view.html

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    ethernet - changed "advertise" and "speed" arguments, and removed "half-duplex" setting under "/interface ethernet" menu
    sfp - convert configuration to support new link modes for SFP and QSFP type of interfaces
    bgp - fixed "atomic-aggregate" always set in output
    bgp - fixed local and remote port settings for BGP connections
    bgp - increase "hold-time" limit to 65000
    bridge - fixed fast-path forwarding with HW offloaded vlan-filtering (introduced in v7.11)
    bridge - fixed untagged VLAN entry disable
    bridge - fixed vlan-filtering stability with HW and non-HW offloaded ports (introduced in v7.10)
    bridge - improved vlan-filtering bridge stability with CAPsMAN (introduced in v7.11)
    bth - added "Back To Home" VPN service for ARM, ARM64, and TILE devices
    calea - improved system stability when trying to add rules without the CALEA package
    console - added "transform" property for ":convert" command
    console - fixed scheduler "on-event" script highlighting when editing
    console - improved multi-argument property parsing into array
    console - improved stability when editing long scripts
    console - show full date and time in scheduler "next-run" property
    dhcp - fixed DHCP server and relay related response delays
    ethernet - added "supported" and "sfp-supported" values for "monitor" command
    interface - added "macvlan" interface support
    ipsec - fixed IPSec policy when using modp3072
    ipv6 - fixed IPv6 RA delay time from 5s to 500ms according to RFC
    ipv6 - send RA and RA deprecate messages out three times instead of just once
    log - improved logging for user actions
    lte - added at-chat support and increased wait time on modem at-chat for Dell DW5821e, DW5821e-eSIM, DW5829e and DW5829e-eSIM
    lte - added SINR reporting for FG621-EA modem
    lte - fixed Sierra modem detection for modems with vendor-specific USB descriptors
    lte - fixed startup race condition when SIM card is in non-default slot for LtAP mini
    netinstall-cli - prioritise interface option over address option
    ospf - fixed adding ECMP routes
    ospf - fixed OSPFv3 not working with NSSA areas
    ospf - fixed parsing of opaque LSAs used by TE
    ospf - fixed translated NSSA routes not showing in backbone
    port - add support for Huawei MS237h-517
    port - expose NMEA/DIAG ports for Dell DW5821e and DW5821e-eSIM
    quickset - fixed "LAN" interface list members if configuration does not contain bridge
    rip - added BFD support
    rip - fixed session not working in VRF
    route - fixed gateway after link restart
    route - removed deprecated "received-from" property
    sfp - improved interface stability for SFP and QSFP types of interfaces
    switch - improved switch chip stability for CCR2004-16g-2s+ devices
    tile - improved system stability when using queues
    traffic-generator - added "priority" property for "inject" command
    wifiwave2 - added comment property for registration-table
    wifiwave2 - enable changing interface MTU and L2MTU
    wifiwave2 - fixed malformed Interworking packet elements
    winbox - allow to set multiple addresses and added IPv6 support under "Interface/VETH" menu
    wireguard - added "wg-add-client" configuration wizard (CLI only)
    wireguard - added "wg-export" and "wg-import" functionality (CLI only)
    wireless - fixed malformed Interworking packet elements
    x86 - added support for Mellanox ConnectX-6 Dx NIC

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Slitheris Network Scanner is an advanced scanner that will quickly provide you with comprehensive information about your network, and so much more. This scanner goes above and beyond most by really digging deep for information and providing it quickly. It is capable of scanning a multitude of devices in a flash, and gives you more than just the run of the mill MAC Address but goes as far as detecting and identifying your OS and device type in addition to using proprietary TCP/UDP OS fingerprinting to detect operating systems like iOS and Android, and Windows, with over 80% accuracy.

Slitheris Network Scanner accurately finds pingable devices via standard multi-threaded ping sweeps as well as detecting unpingable hidden devices using ARP pings and various other advanced discovery technology. It is even equipped to detect true case-sensitive PC names for Windows computers and servers.

 Freemium ( Free for up to 50 devices )

http://www.komodolabs.com/

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

New features

    New interactivity features added to Traffic Chart and Stats UI.
    Detailed traffic info for a point in the Traffic Chart.
    Polished styles in Stats, Chart and Quotas.
    Added Last Hour option to Stats UI.
    Much more...

Fixed bugs

    Removed incomplete support for TeraBytes from Stats UI.
    SEveral other minor issues.

[close]

http://www.netlimiter.com/

[SiLæncer]

Changelog

*) bridge - fixed fast-path forwarding with HW offloaded vlan-filtering (introduced in v7.11);
*) bridge - fixed untagged VLAN entry disable;
*) bridge - fixed vlan-filtering stability with HW and non-HW offloaded ports (introduced in v7.10);
*) bridge - improved system stability;
*) bridge - improved vlan-filtering bridge stability with CAPsMAN (introduced in v7.11);
*) console - improved stability and responsiveness;
*) dhcp - fixed DHCP server and relay related response delays;
*) ipsec - fixed IPSec policy when using modp3072;
*) lte - fixed startup race condition when SIM card is in "up" slot for LtAP mini;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Whats new:>>

    New features:

    Detailed info popup window in Traffic Chart is now displayed above the chart.
    Minor style changes in Stats UI.

    Fixed bugs:

    In Extended stats in Stats UI incoming data were displayed in column for outgoing data.

http://www.netlimiter.com/

[SiLæncer]

Whats new:>>

dhcp - fixed DHCP server "authoritative" and "delay-threshold" settings (introduced in v7.11.1);

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

- Drop packet by request type before adding it into request queue.
- Baselist has been updated to 5041092.

[close]

https://www.nxfilter.org/

[SiLæncer]

QuickSetDNS allows you to easily change the DNS servers that are used for your Internet connection. You can set the desired DNS servers from the user interface, by choosing from a list of DNS servers that you defined, or from command-line, without displaying any user interface.

Freeware

Whats new:>>

    Updated to work properly in high DPI mode.
    Added toolbar button for the 'Set Active DNS (IPv4+IPv6)' option.
    Added 'Double-Click Action' (Under the Options menu), which allows you to choose what to do when you double-click an item: None, Edit DNS Server, Set Active DNS (IPv4), Set Active DNS (IPv4+IPv6), Open Adapter In RegEdit, Properties.
    Added 'Enter Key Action' (Under the Options menu), which allows you to choose what to do when you press the Enter key: None, Edit DNS Server, Set Active DNS (IPv4), Set Active DNS (IPv4+IPv6), Open Adapter In RegEdit, Properties.

http://www.nirsoft.net/utils/quick_set_dns.html