Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

 

    Container - added "start-on-boot" parameter for automatic container startup;
    Dot1x - fixed incorrect error when using "mac-auth";
    L3hw - fixed possible packet loss when using HW offloaded NAT;
    Lte - fixed at-chat on Telit FN980m;
    Ntp - improved initial synchronization speed after bootup;
    Ospf - added SHA hashing for authentication;
    Ospf - refresh OSPFv3 interface configuration when IPv6 network becomes available;
    Ovpn - added IPv6 support for ethernet mode;
    Ppp - fixed memory leak;
    Ssh - increased key generation timeout;
    System - renamed error messages when trying to edit or remove dynamic entries;
    User-manager - allow specifying router's address as subnet;
    User-manager - fixed "migrate-legacy-db" command;
    User-manager - fixed session expiry when it is stopped by Disconnect-Request;
    W60g - improved system stability (introduced in v7.5);
    Wifiwave2 - fixed "WPA Key Data Length" value in EAPOL frame when FT-EAP-SHA384 AKM is used;
    Winbox - added "Rapid Commit" parameter support under "IPv6/DHCP-Server" menu;
    Winbox - allow to rename mounted disks;
    Winbox - fixed "Session Uptime" value for not established sessions under "Routing/BGP" menu;
    Winbox - fixed "System/SwOS" window refreshing after changes are detected;
    Winbox - fixed "User Manager/User Profiles" window refreshing after changes are detected;
    Winbox - made sessions removable in "User Manager" menu;
    Winbox - show "Switch" menu on Chateau LTE18 ax;
    Winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
    Wireguard - strip whitespaces from keys;


 

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Ignore PartialResultException from AdapImport for DC only AD domain.
    Baselist has been updated to 4458254.

[close]

https://www.nxfilter.org/

[SiLæncer]

Mit Simple IP Config können die Angaben für die vorhandenen Netzwerkadapter geändert werden (IP, Subnet-Maske,Gateway, DHCP, DNS).
Diese Werte lassen sich als Profile speichern, so das man später nur noch das passende Profil laden muss.

License:    GNU GPLv3

Changelog

    BUG FIXES:

    Behavior when adapter does not exist.
    Save profiles in portable directory (auto-detect).
    Workgroup incorrect text.
    Refresh button does nothing.

    NEW FEATURES:

    Close to system tray.
    Auto expand larger error popup messages.

[close]

http://sourceforge.net/p/simpleipconfig/home/Home/

[SiLæncer]

NetworkOpenedFiles is a simple tool for Windows that displays the list of all files that are currently opened by other computers on your network. For every opened filename, the following information is displayed: Filename, user name, computer name (On Windows 7/2008 or later), Permissions information (Read/Write/Create), locks count, file owner, file size, file attributes, and more...

Freeware

Whats new:>>

Added 'Add Header Line To CSV/Tab-Delimited File' option (Turned on by default).

http://www.nirsoft.net/utils/network_opened_files.html

[SiLæncer]

Whats new:>>

    Unclass report to main server has been stopped.
    Missing token for AD imported users have been restored.

https://www.nxfilter.org/

[SiLæncer]

ProcessTCPSummary is a network analysis tool, displaying a summary of all process that have TCP connections or listening UDP ports. For each process, this tool displays the total number of TCP connections, connections for each status (established, listening, syn-sent, syn-received...), number of IPv4/IPv6 TCP connections, common port numbers and more.

If run as Administrator, you can also watch the number of TCP/UDP bytes sent and received by every process, as well as the current send/receive speed.

Freeware

Whats new:>>

Added 'Bytes Counter Unit' option. You can choose one of the following units: Bytes, kB, KiB, MB, MiB, GB, GiB.

https://www.nirsoft.net/utils/process_tcp_summary.html

[SiLæncer]

Perform a wide range of tests on your network from your computer by turning to this comprehensive, all-in-one software application.

License: GPLv3

Changelog

What's new?

    log4net added for error handling (Log file: %LocalAppData%\NETworkManager\NETworkManager.log) #1539{:target="_blank"}

Improvements

    IPScanner, PortScanner, DNSServers
        Generate default lists at first run #1544{:target="_blank"}
    Port Scanner
        Add more port profiles (LDAP, HTTP proxy, Filetransfer) #1526{:target="_blank"}
    PowerShell & PuTTY
        Focus embedded window when the application has received the focus #1515{:target="_blank"}
        Focus embedded window when application is selected again #1515{:target="_blank"}
        Focus embedded window when switching tabs #1515{:target="_blank"}
    PuTTY
        Detect if PuTTY is installed at first run #1542{:target="_blank"}
    Discovery Protocol
        Add local connection & local interface to output #1533{:target="_blank"}
    Profiles > Group Dialog
        Remove checkboxes in group dialog #1530{:target="_blank"}

Bugfixes

    Dashboard / Status Window
        Handle null exception properly #1510{:target="_blank"}
    Traceroute
        Hops were skipped if they did not respond to ping #1528{:target="_blank"}
    Ping Monitor, Traceroute & SNMP
        IPv6 is now resolved when selected in the settings #1529{:target="_blank"}
    Remote Desktop, PowerShell, PuTTY & TigerVNC
        "Unlock profile" dialog is now displayed correctly if an embedded window is already open #1515{:target="_blank"}
    PowerShell & TigerVNC
        Embedded window is now resized correctly after the inital connect #1515{:target="_blank"}
    Settings > Profiles
        App crash fixed when a profile file is deleted and an encrypted but locked profile file is selected #1512{:target="_blank"}

Other

    Code cleanup #1515{:target="_blank"}
    Language files updated #transifex{:target="_blank"}
    Dependencies updated #dependencies{:target="_blank"}

[close]

https://github.com/BornToBeRoot/NETworkManager

[SiLæncer]

InternetTest is a small multi-tool for checking internet connection status and more.

You can easily verify if a specific site is down and then navigate to it through the Down Detector function. You can also check an IP location in-app via OpenStreetMap, Bing Maps, or Google Maps. It will also provide you with a connection history displayed on the right side of the simple interface.

These actions can be performed manually, but InternetTest groups them together, making them easily accessible without unnecessary navigation.

Requires Microsoft .NET to run this app.

License: Open Source

Changelog

    New:

    11cfbd5 Added the possibility to remember the window state (#367)
    c55af1f Added "Confidential Mode" button (#368)
    6cc061b Added translations (#368)
    055de9d Added Confidential Mode in "My IP" page (#368)
    2f800d9 Added Confidential Mode in "Locate IP" page (#368)
    3003c56 Added Confidential Mode in "IP Config" page (#368)
    df2b58e Added Confidential Mode in "WiFi Passwords" page (#368)
    3c928ae Added new resource strings (#369)
    df2b58e Added description text for authentication in WiFi Passwords (#369)

    Fixed:

    5cff29b Fixed "Unknown host" error (#366)
    51b156a "My IP" details are now hidden when Confidential Mode is enabled (#368)
    48f63b4 Fixed missing font issues

[close]

https://github.com/Leo-Corporation/InternetTest

[SiLæncer]

Changelog

 

    Bgp - fixed reporting of session uptime;
    Branding - execute "autorun.scr" file when installing branding package;
    Certificate - restricted maximum retry attempt window for Let's Encrypt certificate to 60 minutes;
    Container - allow changing container related parameters while it is running;
    Health - improved voltage reading on RBmAP-2nD;
    Hotspot - fixed SSL usage on all HotSpot pages;
    L3hw - improved connected host offloading on startup;
    L3hw - improved connected IPv6 host offloading when routing table is nearly full for 98DX224S, 98DX226S, and 98DX3236 switch chips;
    L3hw - made route offloading selection work only on unicast;
    Lte - added interface name in MTU debug logging message;
    Ospf - fixed checksum calculation;
    Ospf - improved logging when invalid configuration is detected;
    Route - fixed disappearance of inactive static routes after upgrade;
    Routerboard - set "Delete" as default key to enter booter menu ("/system routerboard upgrade" required);
    Sms - fixed handling of SMS send attempts on unsupported modems;
    User-manager - accept any username for outer authentication;
    User-manager - added "comment" parameter for batch user creation;
    User-manager - added support for multiple accounting sessions;
    User-manager - added variables to print profile name and end time in voucher templates;
    User-manager - forced username verification against client's certificate for EAP-TLS;
    Webfig - fixed creation of new IPv6 routes;
    Winbox - changed order of tabs under "User Manager" menu;
    Wireless - fixed incorrectly applied ingress priority to non-wireless packets;

 

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetworkCountersWatch is a tool for Windows that displays system counters for every network interface on your system. The system counters include the number of incoming/outgoing bytes, number of incoming/outgoing packets, number of broadcast packets, and more. You can also initialize all counters to zero at any time in order to watch the network counters for specific event. NetworkCountersWatch also calculates and displays the current download speed and upload speed on your network interface.

Freeware

Whats new:>>

    Added 'Start As Hidden' option. When this option and 'Put Icon On Tray' option are turned on, the main window of NetworkCountersWatch will be invisible on start.
    Updated to work properly in high DPI mode.

https://www.nirsoft.net/utils/network_counters_watch.html

[SiLæncer]

ManageWirelessNetworks is an alternative tool to the standard 'Manage Wireless Networks' of Windows (or 'Manage Known Networks' on Windows 10). It displays extensive information about every wireless profile on your system, even if the network adapter is not active. For every wireless profile, the following information is displayed: Profile Name, SSID, Connection Type, Connection Mode, Authentication, Encryption, Key Type, Auto Switch (Yes/No), Non Broadcast (Yes/No), Profile Position, Created Time, Modified Time, Wireless Key, and more...

ManageWirelessNetworks also allows you to edit a single profile with the standard editor of Windows, edit the XML of the wireless profile (For advanced users only !), quickly switch between manual and automatic mode, quickly switch between WPAPSK/WPA2PSK/AES/TKIP modes, rename the profile, rename the SSID, move profile position up and down, copy multiple wireless profiles to another wireless card on your system, and more...

Freeware

Whats new:>>

    Added 'Always On Top' option.
    Fixed the default columns size in high DPI mode.

https://www.nirsoft.net/utils/manage_wireless_networks.html

[SiLæncer]

Changelog

 

    bgp - added support for BGP advertisement displaying (CLI only);
    certificate - fixed SHA1 certificate name lookup;
    dhcpv4-server - fixed matcher functionality;
    ethernet - added "5Gbps" option for speed setting;
    firewall - fixed usage of "netmap" action for IPv6 source NAT (CLI only);
    lte - added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
    macsec - fixed interface after Ethernet link down;
    macsec - fixed interface statistics and missing properties;
    macsec - fixed interface status;
    macsec - fixed multiple interface creation on different Ethernet ports
    macsec - removed interface from SMIPS devices;
    ospf - added SHA hashing for authentication;
    queue - improved stability for CAKE type queues;
    snmp - improved retrieval of routing related OID's;
    sstp - added IPv6 support (CLI only);
    switch - improved traffic forwarding at 5Gbps rate for 98DX8525, 98DX4310 switches;
    tile - improved system stability when processing packets;
    webfig - fixed hex input for "Host Uniq" field;
    winbox - added "Active" prefix for current remote and local session ID fields for L2TP-Ether interfaces;
    winbox - added "address-list" parameter under "IP/DNS/Static" menu;
    winbox - added MACsec support;
    winbox - added "type" and "status-report-request" parameters under "Tools/SMS" menu;
    winbox - changed "uptime" parameter format when using the wifiwave2 package;
    wireless - disallowed using "default" as scan list or channel names;

 

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Add down time in slave down alert email.
    Realy agent counting by master node.
    Login failure message on user login page has been added.
    Default timezone from startup.sh has been removed.
    Baselist has been updated to 4435424.

[close]

https://www.nxfilter.org/

[SiLæncer]

A lightweight utility that provides a comprehensive picture of the network and its components along with bandwidth parameters and other useful items.

Donationware

https://github.com/Shinerising/NIAS/releases

[SiLæncer]

Terminal Services Manager shows which user is connected to the remote host, what processes they are running, and how much of the server resources (CPU and memory) they are using. You can send users messages, disconnect them from the server, or connect to their sessions remotely. With Terminal Services Manager you can send bulk messages to users, disconnect idle users, and end sessions of multiple disconnected users simultaneously. Terminal Services Manager allows you to work with several hosts at once.

Terminal Services Manager displays information in both table form and by drawing graphs of the usage of CPU, memory, and other resources over time for each server, session, and user.

Free for personal use

Changelog

    Fixed: I/O error 131 occurs at the program start.
    Added: Message type and message timeout to tools send message to all users, to selected user, to selected session.
    Fixed: Program is not displayed properly on integrated screen after removing external screen.
    Changed: Terminal Servcices Manager is changing its versioning and now using Calendar Versioning.
    Added: Remote shutdown tool to Administrative tools.
    Updated: Ability to change user credentials for remote shutdown tool
    Added: Catalan language.
    Added: Spanish language.
    Added: Slovenian language.

[close]

http://lizardsystems.com/terminal-services-manager/