Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

*) route - fixed "table" menu emptying after RouterOS upgrade;

7.1.4

*) bgp - fixed VPNv4 route sending to remote peer;
*) bridge - fixed destination NAT when using "use-ip-firewall" setting;
*) bridge - fixed filter rules when using interface lists;
*) bridge - fixed priority tagged frame forwarding when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
*) capsman - improved stability when running background scan on CAP;
*) crs3xx - improved maximum allowed ACL rule calculation;
*) crs3xx - improved system stability when creating many ACL rules on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) l2tp - improved system stability when processing L2TP control messages;
*) lte - made "no" the default value for "use-network-apn" parameter;
*) lte - made "RG502QEAAAR11A06M4G" the last OTA firmware version update for Chateau 5G in RouterOS 7.1.x release tree;
*) ntp - improved source address usage for reply packets;
*) ospf - fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
*) ospf - fixed incorrect LSA types when changing area types;
*) ppp - added "comment" option for PPPoE servers;
*) queue - improved system stability when using more than 255 unique packet marks;
*) route - fixed ECMP load balancing in FastPath;
*) route - fixed route addition to VRF from BGP;
*) route - fixed routing configuration export on SMIPS devices;
*) route-filters - renamed "*-set" to "*-list";
*) sfp - improved SFP module detection on CRS106 and CRS112;
*) switch - fixed port-isolation misconfiguration detection when using multiple switches;
*) traffic-flow - do not handle NAT events when "nat-events" is disabled;
*) ups - fixed UPS support;
*) winbox - added "VPN" tab to "Routing/BGP" menu;
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - do not show "Antenna Scan" button on devices that do not support it;
*) wireguard - allow same peer's public key for different interfaces;
*) wireless - added "3gpp-info" parameter to interworking configuration;
*) wireless - added EAP-AKA to interworking's realm configuration;
*) wireless - fixed interface initialization on Metal 2SHPn;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Don't do automatic MS update bypassing anymore.
    NxClassifier ruleset has been updated to 618-3.
    Domain pattern dictionary has been updated.
    Query through DNS protocol disabled for CloudClassifier.
    - 'System > Alert', category missing bug fixed.
    Fetch limit on 'user,user.jsp' has been increased to 100000.

[close]

https://www.nxfilter.org/

[SiLæncer]

Seamlessly change the network profile name displayed by your computer without having to edit registries using this simple application.

Donationware

Whats new:>>

1.[FIXED] – After a Network Profile has been deleted, some Values leaves in a registry key
2.[ADDED] – Language support
3.[ADDED] – Windows Vista support
4.[ADDED] – Some Improvements in coding

https://www.sordum.org/14327/network-profile-name-changer-v1-3/

[SiLæncer]

InternetTest is a small multi-tool for checking internet connection status and more.

You can easily verify if a specific site is down and then navigate to it through the Down Detector function. You can also check an IP location in-app via OpenStreetMap, Bing Maps, or Google Maps. It will also provide you with a connection history displayed on the right side of the simple interface.

These actions can be performed manually, but InternetTest groups them together, making them easily accessible without unnecessary navigation.

Requires Microsoft .NET to run this app.

License: Open Source

Changelog

New

    c455471 Added translations ( #307 )
    9924fb2 Added Website item ( #307 )
    35a30b1 Added a "Multiple websites" section in DownDetector ( #307 )
    98e2f11 Added the possibility to test different websites at the same time ( #307 )
    b0afb5e Added the possibility to check every x seconds multiple websites ( #308 )
    74a7dd6 Added "Delete" button on "Website" item ( #307 )
    d503c7e Added placeholder text in DownDetector ( #308 )
    a3af827 Added translations ( #309 )
    94eb44e Added styles ( #309 )
    4f8951a Added the possibility to hide the IP address ( #309 )
    2978826 Added the possibility to pin the window ( #310 )

Fixed

    c9ae320 Fixed an issue with LeoCorpLibrary ( #306 )
    8c367f2 Fixed an issue with status code method

Updated

    6db1855 Updated LeoCorpLibrary
    50b56d3 Refactored GetStatusCode() method
    1625451 The icon of the button changes when clicked ( #307 )

[close]

https://github.com/Leo-Corporation/InternetTest

[SiLæncer]

Changelog

*) api - accept "Content-Type" with specified charset;
*) arm - fixed "auto" CPU frequency setting;
*) arm64 - improved Watchdog initiated reboot reason reporting;
*) backup - fixed cloud backup's creation timezone;
*) bgp - added BGP advertisements display (requires output.keep-sent-attributes to be set);
*) bgp - fixed link-local iBGP address selection;
*) bgp - fixed network advertisement from address-lists after reboot;
*) bridge - fixed firewall "ingress-priority" matcher and "new-priority=from-ingress" action settings from VLAN tagged frames;
*) ccr2004 - improved system stability on CCR2004-12S+2XS;
*) crs1xx/2xx - fixed static switch host addresses after link down;
*) crs1xx/2xx - ignore static bridge host addresses (switch unicast-fdb should be used instead);
*) dhcpv6 - added VRF support;
*) dude - fixed The Dude client compatibility with RouterOS v7;
*) firewall - improved available port lookup for source NAT when free port range is exhausted;
*) ipsec - fixed "identities" menu emptying after RouterOS upgrade/reboot;
*) ipv6 - do not add duplicate dynamic prefix when static already exists;
*) ipv6 - fixed "retransmissit-interval" unit value;
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;
*) l2tp - fixed CHAP challenge packet processing over IPsec;
*) l3hw - improved routing table offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
*) led - fixed LED behavior on Audience;
*) led - reduced LTE signal LED range to -70;
*) log - added warning message when connection tracking table is full;
*) lte - add IPv6 address on interface as well;
*) lte - added support for Uplink CA reporting;
*) lte - changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
*) lte - do not loose "band" configuration after reboot on Chateau 5G;
*) lte - fixed AT command response handling on R11e-LTE;
*) lte - fixed MBIM modem reset on AT timeout;
*) lte - fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
*) ntp - improved service stability when none of the NTP servers are reachable for a while;
*) ospf - general stability improvements;
*) ospf - improved DB retransmit logging;
*) ospf - send notifies for neighbors;
*) ovpn - improved memory allocation on Tile in "ethernet" mode;
*) ovpn - improved system stability in high load scenarios;
*) pimsm - fixed menu prints;
*) pimsm - general stability improvements;
*) queue - fixed queued IPv6 traffic considered as "invalid" by Firewall;
*) rb4011 - fixed jumbo frame processing on SFP+ port when using 1G module;
*) rip - added logging;
*) rip - fixed route metrics;
*) rip - fixed route redistribution;
*) rip - use nexthop with interface;
*) route - fixed "table" menu emptying after RouterOS upgrade;
*) route - fixed BGP atomic aggregate value;
*) route - fixed ECMP route removal;
*) route - general stability improvements;
*) routerboard - fixed "ether2" interface presence on some RBwAPGR devices;
*) routerboard - fixed WPS button functionality on Audience;
*) routing - added PCAP viewer tool for BGP advertisements debugging purposes;
*) routing-filter - fixed "bgp-*-communities-empty" matcher;
*) sfp - improved SFP module detection on CRS106 and CRS112;
*) smips - improved RAM allocation;
*) switch - added "rx-overflow" counter for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) switch - improved packet forwarding with enabled "cpu-flow-control" setting between different rate interfaces for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) tr069-client - added support for 5G band configuration;
*) tr069-client - added support for wireless "skip-DFS" configuration;
*) winbox - added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;
*) winbox - added missing "accounting", "interim-update" and "radius-password" parameters under "IP/DHCP Server" menu;
*) winbox - allow adding more than 100 tagged/untagged interfaces under "Bridge/VLAN" menu;
*) winbox - allow configuring "VTEP" under "Interface/VXLAN" menu;
*) winbox - fixed "00:00:00" time printing;
*) winbox - fixed switch related settings for MT7621 switch chip (hEX, hEX S, RBM33G, RBM11G, LtAP);
*) winbox - moved IPv4 and IPv6 "Rules" menus under "Routing" menu;
*) winbox - properly show "v" flag instead of "y" under "IP/Route" menu;
*) winbox - properly update server list under "System/NTP Client/Servers" menu;
*) winbox - show "System/Health/Settings" only on boards that have configurable values;
*) www - fixed "tls-version" for SSL;
*) x86 - allow to select disk for install image;
*) x86 - fixed NVME partition path;
*) zerotier - fixed IPv6 support;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

WifiHistoryView is a simple tool for Windows 10/8/7/Vista that displays the history of connections to wireless networks on your computer. For every event that the computer connected to a wireless network or disconnected from it, the following information is displayed: The date/time that the event occurred, network name (SSID), profile name, network adapter name, BSSID of the router/Access Point, and more...

WifiHistoryView can read the wifi history information from a running system or from external event log file of another computer.

Freeware

Whats new:>>

Added 'Copy Clicked Cell' option to the right-click context menu, which copies to the clipboard the text of cell that you right-clicked with the mouse.

https://www.nirsoft.net/utils/wifi_history_view.html

[SiLæncer]

AppNetworkCounter is a simple tool for Windows that counts and displays the number of TCP/UDP bytes and packets sent and received by every application on your system. For every application, the following information is displayed: the number of sent and received bytes, number of sent and received packets, number of sent/received IPv4 bytes, and number of sent/received IPv6 bytes. It also displays the version information of the application - Product Name, Product Version, File Description, and Company Name.

Freeware

Whats new:>>

    Fixed to display the speed values according to the 'Regional Settings' of Windows.
    Fixed to display leading zero according to the 'Regional Settings' of Windows.
    Added Kbps speed unit.

https://www.nirsoft.net/utils/app_network_counter.html

[SiLæncer]

Changelog

    ccr2004 - improved PCI timeout handling on CCR2004-1G-2XS-PCIe;
    dude - fixed The Dude compatibility with ARM64;
    l2tp - improved service stability when disabling L2TP server with connected clients;
    l3hw - fixed default route offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
    lte - enabled multi-APN and name re-use support for Chateau;
    lte - improved stability when modem disappears during firmware upgrade;
    ntp - improved source address usage for reply packets;
    ospf - properly set VRF for gateway;
    poe - fixed PoE driver loading on CRS354-48P-4S+2Q+;
    route - allow OSPF and RIP redistributed routes to be matched by routing filters;
    route - fixed "table" menu emptying after RouterOS upgrade;
    switch - properly limit maximum number of switch rules to 256 on RB5009;
    tr069-client - fixed RPC download of "3 Vendor Configuration File" with branding package;
    x86 - fixed VLAN tagged packet transmit;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Added: LAN-12485 An extended display scanning option is now available under ConfigurationGeneral to retrieve additional data for a wide variety of common monitor models
    Added: LAN-9933 Lansweeper can now perform custom file scanning for Linux computers, like it already could for Windows computers
    Added: LAN-8207 Lansweeper can now scan users from Azure Active Directory, using a new type of scanning target
    Added: LAN-8616 Lansweeper now scans users, user groups and user logon information of Linux computers, like it already did for Windows computers
    Added: LAN-9816 Lansweeper now supports using the LDAPS protocol for scanning and otherwise connecting to on-premises Active Directory domains
    Changed: LAN-9840 If you relink a Lansweeper installation with Cloud whose old data is still present in Cloud, you now get a warning and option to delete the old data first
    Changed: LAN-11061 Improved and expanded the network information scanned for Linux computers
    Changed: LAN-9293 Improved and expanded the operating system information scanned for Linux computers
    Changed: LAN-9295 Improved and expanded the processor information scanned for Linux computers
    Changed: LAN-9294 Improved and expanded the software information scanned for Linux computers, retrieving data from additional commands and directories
    Changed: LAN-9889 Improved and expanded volume information scanned for Linux computers
    Changed: LAN-9526 Improved the way password profile info is displayed on Microsoft 365 user pages
    Changed: LAN-10795 In installations with multiple scan servers, it is now possible to select a scan server from the Microsoft Cloud Service credential creation popup
    Changed: LAN-4597 Removed the report “Software: List of software by computer” from the Reports menu, if not previously modified by users of the Lansweeper installation, as it is a duplicate of “Windows: Installed software by computer”
    Changed: LAN-9296 Replaced old, deprecated commands used for scanning Linux computers with more modern ones, only using the old ones as a fallback now
    Changed: LAN-11122 Some Active Directory scanning options that were previously spread out over the ScanningScanning Targets and ConfigurationServer Options menus are now centralized in a single section of the ScanningScanning Targets menu
    Changed: LAN-8538 SSH and SSH certificate credentials are now grouped under one “SSH” scanning credential type
    Changed: LAN-11223 The “Active Directory Domain scanning options” previously found in a separate section under the ScanningScanning Targets menu are now configurable per Active Directory Domain target
    Changed: LAN-11332 The Lansweeper terms of use are no longer hard coded into the installer for review, but dynamically linked from the Lansweeper website
    Changed: LAN-12511 There is now a button directly in the upper right corner of the web console’s menu bar for linking a Lansweeper installation with Cloud, a button that takes you to the ConfigurationLink With Cloud Site menu
    Changed: LAN-12732 Visual overhaul of the information seen in the ConfigurationLink With Cloud Site menu
    Changed: LAN-10795 When creating a new Microsoft 365 or Intune scanning target, it is now possible to add a credential directly from within the target creation popup
    Changed: LAN-10795 When editing a Microsoft 365 or Intune scanning target, an option to edit the linked credential is now available from within the target popup
    Fixed: LAN-3045 A single VMware guest’s asset name not being retrievable causes the entire scan of the guest’s ESXi or vCenter server to fail
    Fixed: LAN-11364 Automated cleanups of Windows assets can fail due to the following underlying error: “The DELETE statement conflicted with the REFERENCE constraint FK_tblWindowsClusterNode_tblAssets”
    Fixed: LAN-12502 Citrix XenServer hosts can fail to properly scan, with the following error occurring in the background: “Sequence contains no elements”
    Fixed: LAN-4942 Configuring the Display drop-down menu in the upper right corner of reports to show All results can cause the drop-down to disappear
    Fixed: LAN-12658 Deployments that contain a registry condition for a (Default) registry value fail with the following error when run: “Preliminary checks unexpectedly failed”
    Fixed: LAN-12625 Deployments with an After Scanning schedule only ever run once on an asset, even if multiple scans are performed
    Fixed: LAN-3869 Display issue in several scan server menus in the web console when there are lots of scan servers
    Fixed: LAN-12611 Duplicate printer entries in the ConfigDevicesPrinter tab of Windows computer webpages
    Fixed: LAN-7720 Editing Mode is incorrectly labeled as Mass Edit Assets mode when hovering over the Assets menu
    Fixed: LAN-12395 Error in the ScanningAsset Radar Logs menu when the Lansweeper database is hosted under SQL Server 2008 or 2008 R2
    Fixed: LAN-11046 Faulty input validation prevents help desk email accounts with Microsoft Graph as the outgoing but not the incoming protocol from being saved
    Fixed: LAN-4297 If a performance scan of a Windows computer fails with an underlying “invalid query” error due to WMI corruption, that error is not displayed on the asset page, making the cause of the issue unclear
    Fixed: LAN-4479 If Exchange scanning fails over HTTPS due to a timeout, Lansweeper does not try HTTP as it should
    Fixed: LAN-4299 If Hyper-V logs were previously scanned for a guest and that guest is then removed from the Hyper-V host, the guest erroneously remains listed on the host’s Lansweeper webpage, even after a rescan
    Fixed: LAN-12691 In a Cloud-linked installation with multiple scan servers, the Change Sync Server button doesn’t work, triggering a prerequisite check popup whose checks never complete
    Fixed: LAN-4820 In Lansweeper installations with many scan servers, inability to view all server tabs in the ScanningAsset Radar Logs menu
    Fixed: LAN-4818 In Lansweeper installations with multiple scan servers, server tabs under ScanningCompatibility & Settings are squished against the menu bar
    Fixed: LAN-4930 Inability to change the Asset Radar mode after the initial Lansweeper installation, unless another compatibility check is performed first
    Fixed: LAN-10169 Inability to sort the Ping column in the Assets menu
    Fixed: LAN-4592 Incorrect database documentation for the tblLsAgentGroup.Status field
    Fixed: LAN-12578 Incorrect saving of data in the tblSystemDriverPnpEntity and tblPrinterDriverDevice database tables used for linking system drivers and PnP drivers, printers and printer drivers
    Fixed: LAN-12402 Intune and Microsoft 365 scanning can fail when using a proxy server for Internet access, even with valid proxy settings
    Fixed: LAN-5094 Lack of input validation error when attempting to import a scanning credential file that contains a malformed SSH certificate key
    Fixed: LAN-5035 Lack of input validation error when saving an SNMPv1/v2 scanning credential without selecting an SNMP version
    Fixed: LAN-11485 Lansweeper fails to scan warranty information of Dell monitors
    Fixed: LAN-9221 Linking a Lansweeper installation with Cloud can fail if the local database files are stored in a root directory
    Fixed: LAN-7719 Out-of-date asset type list in the asset import template
    Fixed: LAN-11124 Minor language issue in the description of the FILES item under ScanningScanned Item Interval
    Fixed: LAN-12499 Missing Target description under the ScanningScanning Targets menu for AWS targets where all regions are selected
    Fixed: LAN-10946 Multiple scanning credentials can be mapped to the exact same Windows computer, which should not be allowed
    Fixed: LAN-5420 Performance scanning fails to take scanning exclusions into account that were set up for Linux computers
    Fixed: LAN-4106 Some columns in the Assets menu don’t sort correctly when clicked
    Fixed: LAN-5381 Some large values retrieved during disk scanning of Mac computers are not properly written to the Lansweeper database, due to the corresponding database fields being too small
    Fixed: LAN-12042 The Asset Group, Asset Type and Report scanning targets erroneously update the Last IP Range Scan date of Windows computers that are not reachable, preventing those computers from being cleaned up by asset cleanup options
    Fixed: LAN-12408 The auto-update feature doesn’t work when using a proxy server to connect to the Internet, even if the correct proxy settings are submitted under ConfigurationServer Options in the Lansweeper web console
    Fixed: LAN-5557 The built-in report “Users: AD password expired” erroneously includes users whose password is set to never expire
    Fixed: LAN-5537 The “Computer: Duplicate SID” report has a confusing title, as it lists duplicate local user SIDs and not duplicate computer SIDs
    Fixed: LAN-5096 The Lansweeper installer does not prevent users from installing just the scanning service or web console under LocalDB when a LocalDB database is not present, allowing users to set up incomplete and broken installations
    Fixed: LAN-4496 The Password Required field in the Audit tab of Active Directory user pages displays incorrect data, even though the data was correctly scanned
    Fixed: LAN-10144 The Previous and Next buttons in the Credential Mapping section of the ScanningScanning Credentials menu don’t always work
    Fixed: LAN-10992 The Save Log button in the Devicetester tool is grayed out and non-functional even after completing a scan test
    Fixed: LAN-12575 Using the Deploy Package option in certain reports doesn’t result in deployments actually running
    Fixed: LAN-11377 Values entered into ticket custom fields of the Time type are sometimes not applied as submitted
    Fixed: LAN-5174 Volume size label incorrectly set to “MB” instead of “GB” for AWS instances
    Fixed: LAN-4729 When an email alert in Excel format is set up and triggered for a report that contains Active Directory user images, the following error occurs: “Type Byte is not supported”
    Fixed: LAN-4758 When attempting to delete an asset group that is still linked to a performance scanning target, the following web server error is generated instead of the target automatically being deleted: “The DELETE statement conflicted with the REFERENCE constraint FK_tsysPerformanceCounterTarget_tblAssetGroups”
    Fixed: LAN-7694 When deleting a knowledge base article, the article count of the knowledge base category does not immediately update
    Fixed: LAN-4799 When editing a location map and scrolling to the right, assets on the map can move over parts of the user interface
    Fixed: LAN-4805 When submitting % as a wildcard for software version in the software license compliance module, the module fails to include in its count software installations with an empty software version
    Fixed: LAN-9737 Windows autorun items with very long Command values are not properly scanned or saved to the database, due to the underlying database field being too small

[close]

http://www.lansweeper.com/

[SiLæncer]

Whats new:>>

*) route - allow OSPF and RIP redistributed routes to be matched by routing filters;

http://www.mikrotik.com/thedude.php

[SiLæncer]

Changelog

    'config,*.jsp' -> 'system,*.jsp'.
    IMPORT/EXPORT buttons added on 'Category > System', 'Categry > Custom', 'Classifier > Jahaslist'.
    - 'DELETE ALL' button added on custom category edit page.
    Sub-admin and GUI permission feature has been added.
    'Logging > Admin Activity' GUI menu has been added.
    Version check function has been moved into main process for faster GUI login.
    Baselist has been updated to 4374277.

[close]

https://www.nxfilter.org/

[SiLæncer]

Find all active devices on your network. Discover the ip address and available services for each network device. Run a speed test to check your internet connection speed.

PortScan shows all open ports and additional information like host name, MAC address, HTTP, SMB, FTP, iSCSI, SMTP and SNMP services. Up to 100 threads are used for scaning large ip address ranges.

Search Devices
You can search for UPnP enabled devices, Bonjour services, Netgear router, Samsung printer and Freecom network devices. So you can find them even if you don't know the ip address.

Ping Devices
Ping any computer with 3 standard sized ping packets, with 3 different sizes, each 10 times or ping the computer continuously.

Speed Test
Test your internet connection speed by downloading and uploading data to various servers. Also a latency test and a open port test is included.

Freeware

Whats new:>>

Enum shares using server name instead of IP address if possible

http://www.the-sz.com/products/portscan/

[SiLæncer]

Changelog

*) api - accept "Content-Type" with specified charset;
*) arm - fixed "auto" CPU frequency setting;
*) arm - fixed "shutdown" command on hAP ac^2;
*) arm64 - improved Watchdog initiated reboot reason reporting;
*) arm64 - improved low disk space handling condition on upgrade;
*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup - fixed automatic backup generation when resetting configuration;
*) backup - fixed cloud backup's creation timezone;
*) bgp - added BGP advertisements display (requires output.keep-sent-attributes to be set);
*) bgp - do not export default BGP values;
*) bgp - fixed VPNv4 route sending to remote peer;
*) bgp - fixed link-local iBGP address selection;
*) bgp - fixed network advertisement from address-lists after reboot;
*) bgp - fixed routing table and BGP configuration order in export;
*) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth - allow to export device, advertiser and scanner configuration;
*) bluetooth - disable scanning by default;
*) bridge - added fast-path and inter-VLAN routing FastTrack support when vlan-filtering is enabled;
*) bridge - fixed FastPath when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
*) bridge - fixed PPPoE packet forwarding when using "use-ip-firewall-for-pppoe" setting;
*) bridge - fixed bridge filter and NAT rules on ARM64 and TILE devices;
*) bridge - fixed destination NAT when using "use-ip-firewall" setting;
*) bridge - fixed filter and NAT "set-priority" action;
*) bridge - fixed filter and NAT "set-priority" on ARM64 devices;
*) bridge - fixed filter rules when using interface lists;
*) bridge - fixed firewall "ingress-priority" matcher and "new-priority=from-ingress" action settings from VLAN tagged frames;
*) bridge - fixed priority tagged frame forwarding when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
*) capsman - improved stability when running background scan on CAP;
*) capsman - improved system stability when processing CAP packet by Mangle;
*) ccr2004 - improved PCI timeout handling on CCR2004-1G-2XS-PCIe;
*) ccr2004 - improved system stability on CCR2004-12S+2XS;
*) certificate - allow to choose digest algorithm for CSR signing;
*) certificate - made "fingerprint" parameter read-only;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) clock - properly notify all instances about time changes;
*) conntrack - properly detect helper status;
*) console - fixed "print" command with additional "where" condition;
*) console - improved console responsiveness when processing received characters;
*) console - made "password" parameter mandatory when creating a new user;
*) console - properly erase CLI history after configuration reset;
*) console - updated copyright notice;
*) crs1xx/2xx - fixed static switch host addresses after link down;
*) crs1xx/2xx - ignore static bridge host addresses (switch unicast-fdb should be used instead);
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) crs3xx - fixed QSFP+ interface LEDs;
*) crs3xx - fixed watchdog timer functionality;
*) crs3xx - improved SFP+ interface linking after reboot for CRS312 device;
*) crs3xx - improved maximum allowed ACL rule calculation;
*) crs3xx - improved system stability when creating many ACL rules on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf - made "192.168.188.1/24" the default LAN IP address for LTE CPE devices;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
*) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) dhcpv4-server - allow adding comments;
*) dhcpv4-server - remove dynamic leases when server configuration is removed;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
*) dhcpv6 - added VRF support;
*) dot1x - added "server-fail-vlan-id", "guest-vlan-id" and "reauth-timeout" settings for dot1x server;
*) dot1x - added "src-address", "src-mac-address" and "src-port" settings for dynamic switch rules;
*) dot1x - added NAS-Port-ID attribute for RADIUS Access-Request;
*) dude - fixed The Dude client compatibility with RouterOS v7;
*) dude - fixed The Dude compatibility with ARM64;
*) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) firewall - improved available port lookup for source NAT when free port range is exhausted;
*) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot - fixed login page over HTTPS;
*) hotspot - fixed memory leak on every web page loading;
*) hotspot - fixed web page loading using HTTPS;
*) ike2 - ignore "INITIAL-CONTACT" payload on responder when "send-initial-contact" is disabled;
*) interface - fixed minor memory leak when interface or connected route is changed;
*) ipsec - added hardware acceleration support for CCR2116;
*) ipsec - fixed "identities" menu emptying after RouterOS upgrade/reboot;
*) ipv6 - do not add duplicate dynamic prefix when static already exists;
*) ipv6 - fixed "retransmissit-interval" unit value;
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;
*) l2tp - fixed CHAP challenge packet processing over IPsec;
*) l2tp - improved service stability when disabling L2TP server with connected clients;
*) l2tp - improved system stability when processing L2TP control messages;
*) l3hw - added HW offloaded FastTrack support for inter-VLAN routing;
*) l3hw - fixed HW offloaded NAT;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw - fixed bonding source MAC address;
*) l3hw - fixed default route offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
*) l3hw - improved routing table offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
*) l3hw - improved system stability when using 7 or more VLAN interfaces;
*) led - fixed LED behavior on Audience;
*) led - reduced LTE signal LED range to -70;
*) leds - fixed user LED on RB750Gr3;
*) log - added warning message when connection tracking table is full;
*) log - include message also in e-mail body;
*) lora - fixed "antenna-gain" parameter unit;
*) lte - add IPv6 address on interface as well;
*) lte - added 3 APN profile support and APN name re-using on R11e-LTE6;
*) lte - added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
*) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte - added class based support for configless RNDIS LTE modems;
*) lte - added support for Uplink CA reporting;
*) lte - changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
*) lte - do not loose "band" configuration after reboot on Chateau 5G;
*) lte - do not show external antenna selector on devices that does not support it;
*) lte - enabled multi-APN and name re-use support for Chateau;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed "monitor" command to not report old info;
*) lte - fixed AT command response handling on R11e-LTE;
*) lte - fixed IPv6 address addition after startup on R11e-LTE6;
*) lte - fixed MBIM modem reset on AT timeout;
*) lte - fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) lte - fixed possible timeouts when sending SMS in LTE only mode on R11e-LTE;
*) lte - fixed support for Sierra MC7710;
*) lte - fixed support for Telit 960;
*) lte - improved stability on "+EGMR" response in MBIM mode;
*) lte - improved stability when modem disappears during firmware upgrade;
*) lte - improved support for sending/receiving SMS in LTE only mode on R11e-LTE6;
*) lte - made "no" the default value for "use-network-apn" parameter;
*) lte - properly recognize MBIM modem in USB port as LTE on Chateau 5G;
*) ntp - allow adding duplicate server address if dynamic entry exists;
*) ntp - fixed multicast mode support;
*) ntp - improved IPv6 address support;
*) ntp - improved service stability when none of the NTP servers are reachable for a while;
*) ntp - improved source address usage for reply packets;
*) ntp - print log change time with time-zone applied;
*) ospf - added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
*) ospf - convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
*) ospf - fixed MD5 authentication;
*) ospf - fixed NBMA hello's not being sent if priority is set to 0;
*) ospf - fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
*) ospf - fixed default type-3 LSA's not being injected to stub area;
*) ospf - fixed distance if "originate-default" is set to "always";
*) ospf - fixed external LSA not updating after prefix netmask change;
*) ospf - fixed incorrect LSA types when changing area types;
*) ospf - fixed neighbor election failure;
*) ospf - fixed neighbor stuck in ExStart;
*) ospf - fixed simple authentication;
*) ospf - general stability improvements;
*) ospf - improved DB retransmit logging;
*) ospf - improved logging;
*) ospf - improved overall stability;
*) ospf - improved stability for very large LSDB;
*) ospf - improved stability on OSPFv3 instance disabling;
*) ospf - improved stability when DR goes down;
*) ospf - improves stability when handling looped back OSPF packets;
*) ospf - properly set VRF for gateway;
*) ospf - send notifies for neighbors;
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) ovpn - improved UDP session handling;
*) ovpn - improved memory allocation on Tile in "ethernet" mode;
*) ovpn - improved system stability in high load scenarios;
*) pimsm - fixed menu prints;
*) pimsm - general stability improvements;
*) poe - fixed PoE driver loading on CRS354-48P-4S+2Q+;
*) poe - update PoE firmware only on devices that support it;
*) ppp - added "comment" option for PPPoE servers;
*) ppp - fixed AT+CPIN chat when SIM PIN is specified;
*) ppp - improved stability when handling large amount of connections simultaneously;
*) ppp - show local and remote IPv6 addresses (CLI only);
*) pppoe - added option to configure "host-uniq" parameter;
*) pppoe - added option to ignore PADI messages with empty service name;
*) pppoe - use default MTU of 1492;
*) pptp - added insecure connection warning;
*) pptp - show insecure connection warning on dynamic interfaces;
*) qsfp - correctly display auto-negotiation status;
*) queue - fixed queued IPv6 traffic considered as "invalid" by Firewall;
*) queue - improved system stability when processing traffic;
*) queue - improved system stability when using more than 255 unique packet marks;
*) rb4011 - fixed jumbo frame processing on SFP+ port when using 1G module;
*) rip - added logging;
*) rip - fixed route metrics;
*) rip - fixed route redistribution;
*) rip - use nexthop with interface;
*) route - allow OSPF and RIP redistributed routes to be matched by routing filters;
*) route - fixed "min-prefix" configuration when set to 0;
*) route - fixed "suppress-hw-offload" update;
*) route - fixed "table" menu emptying after RouterOS upgrade;
*) route - fixed BGP atomic aggregate value;
*) route - fixed ECMP load balancing in FastPath;
*) route - fixed ECMP route removal;
*) route - fixed route addition to VRF from BGP;
*) route - fixed router's LSA for PTP networks;
*) route - fixed routing configuration export on SMIPS devices;
*) route - general stability improvements;
*) route - improved routing table print speed;
*) route - show OSPF and RIP specific attributes in "/routing route" table;
*) route-filter - fixed "return" action;
*) route-filter - fixed complex matchers with "|| or and &&";
*) route-filter - fixed incorrect invert-match configuration upgrade from RouterOS v6;
*) route-filter - fixed range conversion after update from RouterOS v6;
*) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
*) route-filters - fixed possible address list race condition and memory leak;
*) route-filters - renamed "*-set" to "*-list";
*) routerboard - fixed "ether2" interface presence on some RBwAPGR devices;
*) routerboard - fixed WPS button functionality on Audience;
*) routing - added PCAP viewer tool for BGP advertisements debugging purposes;
*) routing-filter - fixed "bgp-*-communities-empty" matcher;
*) rpki - made RPKI verify non-strict, introduces new state "unverified";
*) rpki - show expire timer;
*) sfp - improved SFP module detection on CRS106 and CRS112;
*) smb - fixed SMB2.0 disk size reporting;
*) smips - improved RAM allocation;
*) sms - increased "at-chat" timeout when sending SMS;
*) snmp - added SFP vendor name to optical table;
*) snmp - added support for "ipv6AddrPrefixTable" and "ipv6RouteNumber" OID's;
*) snmp - allow two level nesting for vlan, bonding speed query;
*) socks - fixed SOCKS5 support;
*) ssh - fixed forwarding with IPv6 link-local addresses;
*) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
*) supout - added "port-controller" bridge section;
*) switch - added "rx-overflow" counter for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) switch - fixed port-isolation misconfiguration detection when using multiple switches;
*) switch - improved packet forwarding with enabled "cpu-flow-control" setting between different rate interfaces for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) switch - improved switch chip initialization process on bootup for CCR2004-16g-2s+ devices;
*) switch - properly limit maximum number of switch rules to 256 on RB5009;
*) system - fixed license loss on some RB1100Dx4 and RB4011 devices;
*) tr069-client - accept 200-299 codes for HTTP diagnostics;
*) tr069-client - added support for 5G band configuration;
*) tr069-client - added support for wireless "skip-DFS" configuration;
*) tr069-client - added support for wireless client uptime reporting;
*) tr069-client - fixed RPC download of "3 Vendor Configuration File" with branding package;
*) traffic-flow - do not handle NAT events when "nat-events" is disabled;
*) traffic-generator - fixed transmit speed for multiple asymmetric streams;
*) upgrade - improved 404 error handling when checking for new versions;
*) upgrade - improved downgrade prompt message;
*) ups - fixed UPS support;
*) usb - fixed display of incorrect port count for USB serial ports;
*) user - removed obsolete "tikapp" policy;
*) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) vlan - fixed improper VLAN priority addition for routed packets;
*) vxlan - allow unsetting "group" and "interface" properties;
*) vxlan - fixed running state after reboot when using "interface" and "group" settings;
*) webfig - do not show side menu if WebFig is disabled by skin;
*) webfig - fixed default configuration popup presence;
*) webfig - fixed user policy lookup for skin designer;
*) wifiwave2 - added "client-isolation" feature;
*) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
*) winbox - added "Disconnect Notify" checkbox to "Interface/OVPN Client" menu;
*) winbox - added "Freq. Usage" and "Scan" buttons for WifiWave2 interfaces;
*) winbox - added "Ignore Missing" selector to "System/Packages" menu;
*) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
*) winbox - added "Routing Table" parameter for IPv6 routes;
*) winbox - added "TLS Version" parameter for "Interface/OVPN";
*) winbox - added "VPN" tab to "Routing/BGP" menu;
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - added "VRF" parameter to "IP/Services" menu;
*) winbox - added "comment" parameter to "User Manager/Users" menu;
*) winbox - added "host-uniq" parameter to PPPoE client interface;
*) winbox - added MLAG support;
*) winbox - added SHA256 and SHA512 "Auth" values for OVPN menu's;
*) winbox - added ZeroTier support;
*) winbox - added explicit "Upload" and "Download" names for "Bucket Size" parameters under "Queues" menu;
*) winbox - added interface list support for "IP/Traffic Flow" menu;
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;
*) winbox - added missing "accounting", "interim-update" and "radius-password" parameters under "IP/DHCP Server" menu;
*) winbox - added support for "Tool/Speedtest" menu;
*) winbox - added support for W60G align tool;
*) winbox - allow adding more than 100 tagged/untagged interfaces under "Bridge/VLAN" menu;
*) winbox - allow configuring "VTEP" under "Interface/VXLAN" menu;
*) winbox - allow setting "Interface" parameter for 100G LED types;
*) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
*) winbox - do not require "name" and "file name" parameters for certificate import/export;
*) winbox - do not show "Antenna Scan" button on devices that do not support it;
*) winbox - do not show connection tracking table if it has more than 10000 entries;
*) winbox - fixed "00:00:00" time printing;
*) winbox - fixed "Switch" menu on Chateau devices;
*) winbox - fixed "action" field in "IP/Web Proxy/Access" menu;
*) winbox - fixed "expires-after" certificate parameter value;
*) winbox - fixed CHR License renewing process;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - fixed content filtering in "Tools/Packet Sniffer/Packets" menu;
*) winbox - fixed entry order in "Tools/Packet Sniffer/Packets" menu;
*) winbox - fixed error message when adding NTH rule with "0" value;
*) winbox - fixed minor typo under "LTE" interface menu;
*) winbox - fixed switch related settings for MT7621 switch chip (hEX, hEX S, RBM33G, RBM11G, LtAP);
*) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
*) winbox - made "Routing Filters/Rules" table sortable;
*) winbox - made OSPF interface type names consistent between CLI and GUI;
*) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
*) winbox - moved IPv4 and IPv6 "Rules" menus under "Routing" menu;
*) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
*) winbox - properly save "IPv6/Settings" menu in session file;
*) winbox - properly show "v" flag instead of "y" under "IP/Route" menu;
*) winbox - properly update ethernet auto negotiation status on CHR;
*) winbox - properly update server list under "System/NTP Client/Servers" menu;
*) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
*) winbox - renamed "MBPS" to "Mbps" value unit name in "Tools/Traffic Generator" menu;
*) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
*) winbox - report local terminal session as "local" instead of "telnet";
*) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
*) winbox - require non empty "Packet Mark" value under "Queues" menu;
*) winbox - show "H" flag for offloaded connections in "IP/Firewall/Connections" menu;
*) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
*) winbox - show "Routes" column by default under "PPP/Secrets" menu;
*) winbox - show "System/Health/Settings" only on boards that have configurable values;
*) winbox - show "System/SwOS" menu only on boards that have dual boot;
*) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
*) winbox - sort "Address List" parameter values alphabetically in "IP/DHCP Server/Leases" menu;
*) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
*) winbox - use "total" as default value for "Tools/Profile";
*) wireguard - allow same peer's public key for different interfaces;
*) wireguard - fixed IPv6 LL address generation;
*) wireguard - fixed IPv6 traffic processing with multiple peers;
*) wireguard - made "preshared-key" and "private-key" values sensitive;
*) wireless - added "3gpp-info" parameter to interworking configuration;
*) wireless - added EAP-AKA to interworking's realm configuration;
*) wireless - added information about client signal strength to log messages about disconnections;
*) wireless - correctly preserve WMM priority when receiving packets;
*) wireless - fixed frequency range information for IPQ4019 interfaces;
*) wireless - fixed interface initialization on Metal 2SHPn;
*) wireless - improved nv2 link stability;
*) wireless - improved wireless connection stability during background scans;
*) www - fixed "tls-version" for SSL;
*) x86 - added support for Intel E810 NIC;
*) x86 - allow to select disk for install image;
*) x86 - fixed NVME partition path;
*) x86 - fixed VLAN tagged packet transmit;
*) x86 - made "no" the default value for "disable-running-check" ethernet parameter;
*) x86 - properly distinguish multiple NICs that share the same PCI bus number;
*) zerotier - fixed IPv6 support;
*) zerotier - made MAC and MTU values read-only;
*) zerotier - properly handle IP address change;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

Bug fixes

    Crash in Connection History if Persian calendar was used.
    Crash with incorrectly set first day of month.

New features

    HotKeys added
    Minor changes

[close]

http://www.netlimiter.com/

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Time format bug fixed on 'Logging > Admin Activity'.
    Delete more than 1 year old admin activity log.
    Baselist has been updated to 4379872.

[close]

https://www.nxfilter.org/