Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

With Homedale you can monitor the signal strength of multiple WLAN Access Points. You can view a summary of all available access points with their signal strength, encryption [WEP/WPA/WPA2], speed, channel and other settings. You can also see the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging and create a screenshot.

Freeware

Whats new:>>

Password field is using asterix now

https://www.the-sz.com/products/homedale/

[SiLæncer]

IPNeighborsView is a tool for Windows 10/8/7/Vista that displays the IP neighbor table of your local computer. For every IP neighbor entry, the following information is displayed: IP Address, MAC Address, MAC Address Company, State, State Time, Local Adapter Name, Local Connection Name.

In the IP neighbor table, you can find the details of computers and devices recently connected to your network. computers and devices are listed only if Windows operating system detected them.

Freeware

https://www.nirsoft.net/utils/ip_neighbor_table_view.html

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

*) branding - fixed LCD logo loading from branding package when installed via Netinstall;
*) branding - properly clean up old branding files before installing a new one;
*) bridge - added IGMP and MLD querier monitoring;
*) bridge - added IGMP snooping log when multicast table gets full;
*) bridge - fixed external flag in the host table for wireless clients;
*) bridge - improved controller bridge stability when adding RouterOS v7 port extender;
*) bridge - improved port extender stability when creating bond interfaces on excluded ports;
*) bridge - improved stability when quickly adding and removing bridge interface;
*) certificate - improved stability when removing dynamic CRL entries;
*) chr - fixed OS provisioning on Azure;
*) chr - improved stability when changing "flow-control" settings on interfaces with e1000 drivers;
*) conntrack - increased total connection tracking table size based on installed RAM size;
*) console - require "write+ftp" permissions for executing script to file;
*) console - require "write+ftp" permissions for printing to file;
*) crs3xx - correctly filter packets by L2MTU on 1Gbps Ethernet interfaces for CRS354 devices;
*) crs3xx - fixed LEDs for QSFP+ interface on CRS326-24S+2Q+ device;
*) crs3xx - fixed SFP and SFP+ link rate reporting (introduced in v6.48beta11);
*) crs3xx - fixed bridge controller and extender packet forwarding for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed default MAC address calculation on management Ethernet for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed interface flow control;
*) crs3xx - improved QSFP+ linking and mode changing for CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - improved packet transmit on SFP+ interfaces;
*) crs3xx - improved switch resource allocation for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf - apply default configuration from branding package when performing reset with button;
*) defconf - removed overlapping IPv6 firewall rules;
*) defconf - use router as DNS server for DHCP hosts;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset lease's dynamic "bcast" flag on packets from relay;
*) dhcpv6-server - check if pool name has changed from RADIUS on renew;
*) dhcpv6-server - improved dynamic server entry update;
*) discovery - do not send discovery packets on interfaces that are blocked by STP (introduced in v6.48);
*) dns - fixed memory leak caused by large DNS replies;
*) firewall - fixed "ingress-priority" matcher;
*) firewall - fixed GRE protocol packets considered invalid when PPTP helper is disabled;
*) gps - improved interface monitoring;
*) health - added "phy-temperature" sensor monitoring for CRS312 device;
*) health - improved temperature readings on hEX S;
*) health - improved temperature reporting;
*) ike2 - added support for ASN.1 DN "my-id" value setting for initiators;
*) ike2 - check if TS is still valid after obtaining SPI;
*) ike2 - fixed initiator packet retransmit with DDOS cookie;
*) ipsec - fixed memory leak when processing DHCP packets;
*) ipsec - improved SA update by SPI;
*) ipsec - improved system stability on CHR;
*) ipsec - improved system stability on MMIPS devices;
*) kid-control - improved IPv6 firewall rule generation;
*) led - added LTE LED support for LHGGR;
*) leds - fixed LTE LED default mapping for wAP R ac LTE kit;
*) lora - added additional predefined network servers;
*) lora - added channel plan "il-917" for Israel;
*) lora - fixed "PULL_DATA" token generation;
*) m33g - improved support for "/system gpio" menu ("/system routerboard upgrade" required);
*) m33g - removed 12..16 pins from "/system gpio" menu;
*) mipsbe - improved booting speed on non-NAND devices ("/system routerboard upgrade" required);
*) mpls - allow to disable FastPath (CLI only);
*) mqtt - added server name indication;
*) netinstall - fixed lock file persistence after reinstall;
*) netinstall - improved bootp packet handling on Linux netinstall-cli version when multiple NIC's are present;
*) netinstall - require Netinstall version to be the same or newer as "factory-software";
*) ntp - use correct IPv6 multicast group for SNTP client;
*) package - always allow to uninstall package even if there is no free disk space left;
*) poe - update PoE firmware only on devices that supports it;
*) ppp - improved stability when receiving bogus response on modem channel;
*) qsfp - improved system stability when setting unsupported link rates;
*) quickset - use 5GHz interface's country for "Home AP Dual" configuration;
*) routerboard - fixed "reformat-hold-button-max" validation for values below 10s;
*) sfp - added "sfp-rate-select" setting;
*) sfp - fixed GPON module linking (introduced in v6.47);
*) sfp - improved 25Gbps optical module stability and linking;
*) sfp - improved SFP, SFP+, SFP28 and QSFP+ interface stability for CRS3xx and CCR2004 devices;
*) sfp - improved link stability for 10G, 25G and 40G modules on CRS309, CRS312, CRS326-24S+2Q+ CRS354 and CCR2004 devices;
*) sfp28 - changed FEC auto mode to disabled;
*) snmp - added "engine-id" OID support;
*) snmp - fixed "ipNetToMediaType" OID for incomplete entries;
*) ssh - fixed "undo" functionality;
*) supout - added controller bridge section;
*) supout - print detailed list of active user sessions;
*) switch - fixed (R/M)STP port blocking right before switching them in HW bridge (fixes possible packet loop when changing bridge settings);
*) switch - improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device;
*) swos - fixed "static-ip-address" parameter;
*) tr069-client - added "X_MIKROTIK_LinkDowns" parameter for interface "link-downs" value reporting;
*) tr069-client - added support for Ethernet link speed reporting;
*) tr069-client - added support for interface comment reporting and editing;
*) tr069-client - added support for supout file upload;
*) tr069-client - fixed traceroute diagnostics time values;
*) tr069-client - improved XML with new-lines for readable output;
*) tr069-client - improved stability for download/upload diagnostics;
*) upgrade - fixed free space checking on flash type memories when installing new packages;
*) ups - added battery info for APC Back-UPS BX750MI;
*) user - added "expired" user status with suggestion to change password (WinBox v3.29 required);
*) user - fixed active user session purging on disconnect;
*) user - show "expired password" prompt for users with blank password;
*) w60g - general stability and performance improvements;
*) w60g - limit power output when using region EU to match EN302567 on nRAY;
*) w60g - use EU region by default;
*) webfig - added support for logo image from branding package;
*) webfig - do not show value units twice;
*) webfig - fixed "Wireless/CAP" menu opening;
*) webfig - fixed interface sorting by name;
*) webfig - show only "Close" button under "Wireless/Wireless Sniffer/Sniffed Packets" menu;
*) winbox - added "dhcp" option to "multicast-helper" setting;
*) winbox - added "fec-mode" parameter under "Interface/Ethernet" menu;
*) winbox - added "interface-speed-100G" LED type to "System/LEDs" menu;
*) winbox - added "name" and "file-name" parameter when importing and exporting certificates;
*) winbox - added "sfp-shutdown-temperature" setting to SFP interfaces;
*) winbox - added SSH settings under "IP/SSH" menu;
*) winbox - added TFTP settings under "IP/TFTP/Settings" menu;
*) winbox - allow setting MCS (24-31) to 4x4 Wireless interfaces;
*) winbox - do not allow to add/remove W60G interfaces;
*) winbox - do not allow to set empty "init-string" field under "System/GPS" menu;
*) winbox - do not show "GPS antenna" selection for devices without selection support;
*) winbox - fixed "Secondary Frequency" parameter setting under "CAPsMAN/Channel" menu;
*) winbox - fixed DNS "cache-size" parameter setting;
*) winbox - fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
*) winbox - fixed order of weekdays under "IP/Firewall" menu;
*) winbox - fixed support for "Delegated-IPv6-Prefix" for PPP services;
*) winbox - match "MAC Protocol-Num" predefined values under "Bridge/Filters" menu;
*) winbox - minimal required version is v3.30;
*) winbox - properly show "CRL Signature" field under "System/Certificate" menu;
*) winbox - separated CCQ Tx and Rx values in their own unique columns;
*) winbox - show "System/Health/Settings" only on boards that have configurable values;
*) winbox - show "current-channel" column by default for CAP interfaces;
*) winbox - show IPv6 address in separate field under "IP/Cloud" menu;
*) wireless - added U-NII-2 support for US and Canada country profiles for hAP ac lite;
*) wireless - added override for multicast-to-unicast translation of DHCP traffic;
*) wireless - do not remove channels >2462 MHz from "scanlist" if scanning for fixed channel;
*) wireless - do not send packet back to station-bridge it was received from;
*) wireless - fixed minor typo in debug logging messages;
*) wireless - improve WMM priority assignment for packets with internal priority greater than 7;
*) wireless - improve regulatory compliance with DFS requirements;
*) wireless - improve signaling of QCA9984 interface capabilities when using 160/80+80MHz channel width;
*) wireless - improved system stability when sending packets through interface after L2MTU is increased;
*) wireless - log client signal strength on disconnect;
*) wireless - renamed "secondary-channel" to "secondary-frequency";
*) wireless - updated "israel" regulatory domain information;
*) wireless - updated "united kingdom" regulatory domain information;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

    GUI:

    Upgrade embedded Python to version 3.7 in Windows package
    Upgrade Visual C++ Redistributable for Visual Studio 2019 in Windows package
    Fix SSL support in Windows package
    Open "template configuration" dialog with double click on template name in "Preferences".
    Only show "virtio" network adapter when legacy node is enabled.
    Double-click on a template opens "template configuration" dialog.
    Fix "Custom symbols" can't be unfolded after using "Filter" field.

    Server:

    Release web UI 2.2.26
    Sort symbols by theme.
    Fix memory percentage left warning.
    Update affinity symbols.

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

Changelog

    Branding - properly clean up old branding files before installing a new one;
    Crs3xx - fixed default MAC address calculation on management Ethernet for CRS312, CRS326-24S+2Q+ and CRS354 devices;
    Gps - improved interface monitoring;
    Health - improved temperature reporting;
    Ike2 - check if TS is still valid after obtaining SPI;
    Ipsec - improved SA update by SPI;
    Netinstall - require Netinstall version to be the same or newer as "factory-software";
    Poe - update PoE firmware only on devices that supports it;
    Ppp - improved stability when receiving bogus response on modem channel;
    Qsfp - improved system stability when setting unsupported link rates;
    Sfp - added "sfp-rate-select" setting (CLI only);
    Sfp - improved SFP, SFP+, SFP28 and QSFP+ interface stability for CRS3xx and CCR2004 devices;
    Sfp28 - changed FEC auto mode to disabled;
    W60g - limit power output when using region EU to match EN302567 on nRAY;
    W60g - use EU region by default;
    Winbox - added "name" and "file-name" parameter when importing and exporting certificates;
    Winbox - allow setting MCS (24-31) to 4x4 Wireless interfaces;
    Winbox - do not allow to set empty "init-string" field under "System/GPS" menu;
    Winbox - do not show "GPS antenna" selection for devices without selection support;
    Winbox - show "System/Health/Settings" only on boards that have configurable values;
    Winbox - show "current-channel" column by default for CAP interfaces;
    Wireless - added U-NII-2 support for US and Canada country profiles for hAP ac lite;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

ManageWirelessNetworks is an alternative tool to the standard 'Manage Wireless Networks' of Windows (or 'Manage Known Networks' on Windows 10). It displays extensive information about every wireless profile on your system, even if the network adapter is not active. For every wireless profile, the following information is displayed: Profile Name, SSID, Connection Type, Connection Mode, Authentication, Encryption, Key Type, Auto Switch (Yes/No), Non Broadcast (Yes/No), Profile Position, Created Time, Modified Time, Wireless Key, and more...

ManageWirelessNetworks also allows you to edit a single profile with the standard editor of Windows, edit the XML of the wireless profile (For advanced users only !), quickly switch between manual and automatic mode, quickly switch between WPAPSK/WPA2PSK/AES/TKIP modes, rename the profile, rename the SSID, move profile position up and down, copy multiple wireless profiles to another wireless card on your system, and more...

Freeware

Whats new:>>

Added 'Copy Clicked Cell' option to the right-click context menu, which copies to the clipboard the text of cell that you right-clicked with the mouse.

https://www.nirsoft.net/utils/manage_wireless_networks.html

[SiLæncer]

PingInfoView is a small utility that allows you to easily ping multiple host names and IP addresses, and watch the result in one table. It automatically ping to all hosts every number of seconds that you specify, and displays the number of succeed and failed pings, as well as the average ping time. You can also save the ping result into text/html/xml file, or copy it to the clipboard.

License: Freeware

Whats new:>>

Added 'Copy Clicked Cell' option to the right-click context menu, which copies to the clipboard the text of cell that you right-clicked with the mouse.

http://www.nirsoft.net/utils/multiple_ping_tool.html

[SiLæncer]

PortExpert provides you with a detailed view of your PCs cybersecurity. It automatically monitors all applications connected to the internet and gives you all the information you might need to identify potential threats to your system.

License: Freeware

Whats new:>>

    [Refactoring] Update ICS library to 8.66 and OpenSSL to 1.1.1k (Kyle_Katarn)
    [Bug] Windows 11 is identified as a Windows 10 (Kyle_Katarn)

http://www.kcsoftwares.com/?portexpert

[SiLæncer]

Nethor is a free packet analyzer and visualizer for use with Microsoft Windows. It allows working with multiple open PCAP/PCAPNG files as one in an intuitive and simple user interface. The application does not use any third-part modules or plug-ins, nor the Windows Registry.

License: Open Source

Changelog

    Added Subnet Calculator tool
    Eliminated flickering in Timeline during packet capture
    Improved loading and packet capture performance in the Device Matrix module
    Improved loading and packet capture performance in the World Map module
    Smoother packet playback experience
    Fixed some file handling bugs
    Some GUI improvements

[close]

https://nethor.com/

[SiLæncer]

TCPView ist ein Windows-Programm, das eine detaillierte Auflistung aller TCP- und UDP-Endpunkte auf Ihrem System enthält. Dazu gehören die lokalen Adressen sowie die Remoteadressen und Status der TCP-Verbindungen. Unter Windows Server 2008, Vista und XP berichtet TCPView auch den Namen des Prozesses, der den Endpunkt besitzt. TCPView stellt eine informativere und benutzerfreundlichere Teilmenge des Netstat-Programms zur Verfügung, das mit Windows geliefert wird. Der TCPView-Download enthält Tcpvcon, eine Befehlszeilenversion mit der gleichen Funktionalität.

Freeware

Whats new: >>

Get high DPI application icon.

https://docs.microsoft.com/de-de/sysinternals/downloads/tcpview

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

Fixed: LAN-11131 Asset exclusion changes are not always synced correctly between the on-prem installation and Cloud
Fixed: LAN-10668 Editing an existing Microsoft Cloud Service credential results in an error saying the credential name already exists, even when the submitted name is in fact unique
Fixed: LAN-4105 Hyper-V guests move between hosts when those hosts are part of a failover cluster setup
Fixed: LAN-10716 If a Windows computer’s name fails to resolve to an IP address during a Rescan, Lansweeper does not try to scan the computer’s previously detected IP as a fallback, which it should
Fixed: LAN-10914 Old scanning errors are not removed from the webpages of non-Windows assets and the assets’ Last Tried and Last IP Scan dates are not updated as they should be
Fixed: LAN-10576 When rescanning a Hyper-V host that has multiple generic guests with the same name or MAC address, the links between the host asset and most of the guests are lost

[close]

http://www.lansweeper.com/

[SiLæncer]

cStatus is an advanced portable network scanning and monitoring tool, notably including a Traceroute function with the rare capability (under Windows) to return AS# (Autonomous System) number and network name for each hop traversed.

Freeware

Changelog

    [Fix] Display option to add entry When clicking on the background of entry list
    [Fix] When the mouse was over one entry outside main tab, it was not showing which IP was resolved
    [New] New button on Windows Info tool that Shows/Hides detailed information

[close]

https://www.hnsoft.pt/cstatus

[SiLæncer]

Whats new:>>

Fixed: LAN-11341 When linking an installation that has multiple scan servers with Cloud, servers not configured as sync server erroneously attempt to sync data with Cloud as well
Fixed: LAN-11349 Windows Server 2022 machines are sometimes erroneously identified as Windows Server 2020

http://www.lansweeper.com/

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Whats new:>>

    Add a negative cache when there are 5 empty responses continuously for the same domain.
    Several antivirus software related domains have been added into common-bypass.tpl file.
    Baselist has been updated to 4032373.

http://www.nxfilter.org/

[SiLæncer]

A robust ping monitoring tool for automatic checking connection to network hosts. By making regular pings it monitors network connections and notifies you about detected ups/downs. EMCO Ping Monitor also provides connection statistics info, including uptime, outages, failed pings, etc. You can easily extend functionality and configure EMCO Ping Monitor to execute custom commands or launch applications when connections are lost or restored.

Freemium

Changelog

    New and improved features:

    Added compatibility with Windows 11 and Windows Server 22

    Resolved issues:

    Possible error when generating a report
    Minor compatibility issues

[close]

http://www.emco.is/products/ping-monitor/features.php