Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

With Homedale you can monitor the signal strength of multiple WLAN Access Points. You can view a summary of all available access points with their signal strength, encryption [WEP/WPA/WPA2], speed, channel and other settings.

You can also see the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging and create a screenshot.

Freeware

Whats new:>>

160 MHz channel detection improved

http://www.the-sz.com/products/homedale/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
    The Dude client must be manually upgraded after upgrading The Dude server.
    Make sure LTE APN Profile name does not match any of the DHCP server's names if LTE passthrough is used.
    The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.

    MAJOR CHANGES:

    !) dns - added client side support for DNS over HTTPS (DoH) (RFC8484);
    !) socks - added support for SOCKS5 (RFC 1928);
    !) user - enable "winbox" policy for groups with "dude" policy;

    Changes in this release:

    *) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
    *) wireless - improved system stability on hAP ac^2;

    Other changes since v6.46.4:

    *) bonding - improved slave interface MAC address handling;
    *) bonding - prefer primary slave MAC address for bonding interface;
    *) branding - do not ask to confirm configuration applied from branding package;
    *) branding - fixed identity setting from branding package;
    *) branding - properly use HTML files for Hotspot (introduced in v6.47beta);
    *) bridge - added logging message when a host MAC address is learned on a different bridge port;
    *) bridge - added warning message when port is dynamically added to entry with VLAN range (CLI only);
    *) bridge - correctly remove disabled MSTI;
    *) bridge - improved hardware offloading enabling/disabling;
    *) capsman - fixed "certificate" parameter updating on CAP;
    *) certificate - added "skid" and "akid" values for detailed print;
    *) certificate - allow dynamic CRL removal;
    *) certificate - disabled CRL usage by default;
    *) certificate - do not use SSL for first CRL update;
    *) chr - added support for file system quiescing;
    *) console - prevent incorrect type interfaces appearing in command hints;
    *) crs3xx - correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
    *) crs3xx - do not change bridge host ID's when updating host table (introduced in v6.47beta32);
    *) crs3xx - fixed "ingress-rate" property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
    *) crs3xx - fixed QSFP interface linking after removing/inserting QSFP module (introduced in v6.47beta49);
    *) crs3xx - fixed QSFP+ interface linking for CRS326-24S+2Q+ device (introduced in v6.47beta19);
    *) crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
    *) crs3xx - fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
    *) crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
    *) crs3xx - improved switch host table updating;
    *) defconf - fixed "no-defaults=yes" applying default configuration (introduced in v6.47beta);
    *) defconf - fixed default configuration initialization if power loss occurred during the process;
    *) dhcpv4 - added end option (255) validation for both server and client;
    *) dhcpv4-client - improved stability when changing client while still receiving advertisements;
    *) dhcpv4-server - disallow zero lease-time setting;
    *) dhcpv6-client - improved error logging when when renewed address differs;
    *) dhcpv6-server - fixed MAC address retrieving from DUID when timestamp is present;
    *) discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
    *) discovery - do not send discovery packets on inactive bonding slave interfaces;
    *) discovery - do not send discovery packets on interfaces that are blocked by STP;
    *) disk - improved recently created file survival after reboots;
    *) dns - added support for exclusive dynamic DNS server usage from IPsec;
    *) dot1x - added "radius-mac-format" parameter (CLI only);
    *) dot1x - added hex value support for RADIUS switch rules;
    *) dot1x - added range "dst-port" support for RADIUS switch rules;
    *) dot1x - added support for lower case "mac-auth" RADIUS formats;
    *) dot1x - fixed "reject-vlan-id" value range;
    *) dot1x - fixed dynamically created switch rule removal when client disconnects;
    *) dot1x - fixed port blocking when interface changes state from disabled to enabled;
    *) dot1x - improved debug logging output to "dot1x" topic;
    *) dot1x - improved value validation for dynamically created switch rules;
    *) dude - fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
    *) fetch - fixed "User-Agent" usage if provided by "http-header-field";
    *) filesystem - fixed NAND memory going into read-only mode or becoming unstable over time;
    *) health - added "gauges" submenu with SNMP OID reporting;
    *) hotspot - updated splash page design ('/ip hotspot reset-html' required);
    *) ike1 - added error message when specifying "my-id" for XAuth Identity;
    *) ike1 - added support for "UNITY_DEF_DOMAIN" and "UNITY_SPLITDNS_NAME" payload attributes;
    *) ike1 - improved policy lookup with specific protocol;
    *) ike1 - improved stability when performing policy lookup on non-existant peer;
    *) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
    *) ike2 - added support for "INTERNAL_DNS_DOMAIN" payload attribute;
    *) ipsec - added "split-dns" parameter support for mode configuration (CLI only);
    *) ipsec - added "use-responder-dns" parameter support (CLI only);
    *) ipsec - control CRL validation with global "use-crl" setting;
    *) ipsec - do full certificate validation for identities with explicit certificate;
    *) ipsec - fixed minor spelling mistake in logs;
    *) ipsec - improved IPsec service stability when receiving bogus packets;
    *) ipsec - improved system stability when handling fragmented packets;
    *) kidcontrol - ignore IPv6 multicast MAC addresses;
    *) lcd - fixed LCD service becoming unavailable on devices without LCD screen;
    *) led - added "dark-mode" functionality for CRS105-5S-FB;
    *) led - fixed minor typo in LED warning message;
    *) lora - added IPv6 support for LoRa packet forwarder;
    *) lora - added UTC timestamp for RX events in "rxpk" json;
    *) lora - added value limits for "freq-off" parameter;
    *) lora - properly update source address for packets when routing table is changed;
    *) lte - added support for Huawei K5161 modem;
    *) lte - added support for NEOWAY N720;
    *) lte - added support for multiple passthrough APN configuration;
    *) lte - do not allow running "scan" on R11e-4G;
    *) lte - fixed "allow-roaming" setting when using LTE network mode on R11e-LTE;
    *) lte - fixed "band" value setting when configuration is reset on R11e-4G;
    *) lte - fixed IP type selection from APN on RBSXTLTE3-7;
    *) lte - fixed multiple APN reactivation after deactivation by operator;
    *) lte - made "mac-address" parameter read-only;
    *) lte - show "phy-cellid" value only in LTE mode;
    *) netinstall - removed "Flashfig" from Netinstall;
    *) netinstall - removed "Make Floppy" from Netinstall;
    *) netinstall - signed netinstall.exe with Digital Signature;
    *) ppp - added support for ZTE MF90;
    *) ppp - fixed minor typo when running "info" command;
    *) proxy - increased minimal free RAM that can not be used for proxy services;
    *) quickset - do not show "SINR" field in Quick Set when there is no data;
    *) quickset - removed "EARFCN" field from Quick Set;
    *) quickset - removed "LTE band" setting from Quick Set;
    *) quickset - show "Antenna Gain" setting on devices without built-in antennas;
    *) quickset - use "station-wds" mode when connecting to AP with RouterOS flag;
    *) route - improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
    *) routing - improved IGMP-Proxy service stability when receiving bogus packets;
    *) sniffer - allow setting port for "streaming-server";
    *) sniffer - fixed minor typo in "host" menu;
    *) snmp - added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB;
    *) snmp - changed "upsEstimatedMinutesRemaining" reported value from seconds to minutes;
    *) snmp - fixed "dot1dBasePort" index offset for BRIDGE-MIB;
    *) snmp - fixed multiple LTE interface OID reporting;
    *) snmp - improved OID policy checking and error reporting on "set" command;
    *) snmp - improved stability when polling MAC address related OID;
    *) ssh - fixed SHA256 user authentication algorithm checking (introduced in v6.46.4);
    *) supout - added "dot1x" section to supout files;
    *) supout - added "gps" section to supout files;
    *) supout - improved PoE-out information reporting;
    *) supout - improved UPS information reporting;
    *) switch - made "auto" the default value for "vlan-id" parameter when creating a new static host entry;
    *) system - correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
    *) system - improved driver loading speed on startup;
    *) system - improved kernel panic reporting in logs after reboot;
    *) system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
    *) tr069-client - removed warning log message when not using HTTPS;
    *) traceroute - improved stability when invalid packet is received;
    *) traffic-flow - added "postDestinationMacAddress" parameter support for IPFIX and Netflow v9;
    *) traffic-generator - improved statistics reporting;
    *) upgrade - fixed space handling in package file names;
    *) ups - improved compatibility with APC Smart UPS 1000 and 1500;
    *) w60g - fixed link status logging;
    *) w60g - improved rate selection in low traffic conditions;
    *) w60g - improved stability after multiple disconnections;
    *) w60g - use "arp" and "mtu" parameters from master interface when creating a new station;
    *) webfig - updated icon design;
    *) winbox - added "Options" parameter support for DHCPv6 client and server;
    *) winbox - added "Rate" parameter for switch ACL rules;
    *) winbox - added "auto-erase" option to "Tool/SMS" menu;
    *) winbox - added 160Mhz extension channel support for CAPsMAN;
    *) winbox - added comment support for "Switch->VLAN" menu;
    *) winbox - added support for "Tools->WoL" menu;
    *) winbox - added support for inline bar graphs for LTE signal values;
    *) winbox - aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required);
    *) winbox - allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
    *) winbox - allow setting "Primary" parameter for "balance-tlb" bonding interfaces;
    *) winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
    *) winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
    *) winbox - fixed "BGP Origin" value display under "IPv6->Routes" menu;
    *) winbox - fixed "Bands" parameter display for LTE interfaces;
    *) winbox - fixed "DSCP" parameter value setting;
    *) winbox - fixed "Data Rate" checkbox alignment (WinBox v3.22 required);
    *) winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
    *) winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
    *) winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
    *) winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
    *) winbox - fixed automatic "IPv6->Firewall->Address List" table update;
    *) winbox - fixed bonding type interface support for "Switch->Host" table;
    *) winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
    *) winbox - made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area;
    *) winbox - properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
    *) winbox - removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "Lora/Traffic";
    *) winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
    *) winbox - renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
    *) winbox - show "Hardware Offload" parameter for bonding interfaces;
    *) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
    *) winbox - updated icon design;
    *) wireless - added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
    *) wireless - added "russia 6ghz" regulatory domain information;
    *) wireless - added "skip-dfs-channels" parameter;
    *) wireless - allow using "russia4" regulatory domain on RU locked devices;
    *) wireless - enabled unicast flood for DHCP traffic on ARM architecture access points;
    *) wireless - updated "bangladesh" regulatory domain information;
    *) wireless - updated "russia4" regulatory domain information;
    *) wireless - fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
    *) wireless - updated "indonesia4" regulatory domain information;
    *) www - added "tls-version" parameter in "IP->Services" menu (CLI only);

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

WifiHistoryView is a simple tool for Windows 10/8/7/Vista that displays the history of connections to wireless networks on your computer. For every event that the computer connected to a wireless network or disconnected from it, the following information is displayed: The date/time that the event occurred, network name (SSID), profile name, network adapter name, BSSID of the router/Access Point, and more...

WifiHistoryView can read the wifi history information from a running system or from external event log file of another computer.

Freeware

Whats new:>>

Added options to filter the wifi history information by Event Type: Show Connected, Show Disconnected, Show Failed To Connect, Show Network Association.

http://nirsoft.net/utils/wifi_history_view.html

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

    GUI:

    Fix VNC console template doesn't extract %i (Project UUID). Fixes #2960
    Fix contextual menu issues. Ref #2955

    Server:

    Release Web-Ui 2020.2.0-beta.1
    Fix uBrigde error popups when Docker image has stopped. Fixes #2957
    Fix warning that you are explicitly comparing literals

[close]

https://www.gns3.com/software

[SiLæncer]

Changelog

    !) user - enable "winbox" policy for groups with "dude" policy;
    *) capsman - fixed "certificate" parameter updating on CAP;
    *) console - prevent incorrect type interfaces appearing in command hints;
    *) crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
    *) crs3xx - fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
    *) crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
    *) discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
    *) dude - fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
    *) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
    *) ipsec - improved system stability when handling fragmented packets;
    *) led - added "dark-mode" functionality for CRS105-5S-FB;
    *) lora - added IPv6 support for LoRa packet forwarder;
    *) lora - added UTC timestamp for RX events in "rxpk" json;
    *) lora - added value limits for "freq-off" parameter;
    *) lora - properly update source address for packets when routing table is changed;
    *) lte - fixed IP type selection from APN on RBSXTLTE3-7;
    *) sniffer - fixed minor typo in "host" menu;
    *) supout - added "gps" section to supout files;
    *) supout - improved PoE-out information reporting;
    *) system - improved kernel panic reporting in logs after reboot;
    *) system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
    *) traceroute - improved stability when invalid packet is received;
    *) traffic-generator - improved statistics reporting;
    *) w60g - improved stability after multiple disconnections;
    *) winbox - added "Options" parameter support for DHCPv6 client and server;
    *) winbox - added 160Mhz extension channel support for CAPsMAN;
    *) winbox - added support for "Tools->WoL" menu;
    *) winbox - allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
    *) winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
    *) winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
    *) winbox - fixed "Bands" parameter display for LTE interfaces;
    *) winbox - fixed "DSCP" parameter value setting;
    *) winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
    *) winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
    *) winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
    *) winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
    *) winbox - fixed automatic "IPv6->Firewall->Address List" table update;
    *) winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
    *) winbox - properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
    *) winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
    *) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
    *) wireless - added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
    *) wireless - added "skip-dfs-channels" parameter;
    *) wireless - fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
    *) wireless - updated "bangladesh" regulatory domain information;
    *) wireless - updated "indonesia4" regulatory domain information;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Wi-Fi Scanner locates visible wireless networks along with all corresponding information; including the network name (SSID), signal strength (RSSI) and quality, MAC address (BSSID), channel, maximum and achievable data rate, security, and much more.

Free for non-commercial use with simple registration.

Whats new:>>

    Fixed: RSSI value for current connection for Intel wireless card on Windows 10
    Updated: Number of network card vendors is increased to 39334.

https://lizardsystems.com/wi-fi-scanner/

[SiLæncer]

Use NetBalancer Free to set download/upload transfer rate priority for applications and monitor their internet traffic. Browse and do any internet activity comfortably even when your download manager or torrent client downloads huge files from the web - just lower their network priority with this app. Applications with a higher network priority will gain more traffic bandwidth than those with a lower one.

Changelog

    In NetBalancer v9.17 we've improved all statistics (top apps, totals and event log) by adding the adapter selector, so now it is possible to see statistics by a specific adapter.
    Also in this version we've added the traffic() function for programmable rules, which returns the downloaded or uploaded traffic of a rule for a specified time duration in the past.

[close]

http://seriousbit.com/netbalancer/

[SiLæncer]

Free Port Scanner is a small, fast, easy-to-use and robust port scanner for the Win32 platform. You can scan ports on fast machines in a few seconds and can perform scan on predefined port ranges. This tool uses TCP packets to determine available hosts and open ports, service associated with port and other important characteristics. The tool is designed with a user-friendly interface and is easy to use.

Freeware

http://www.nsauditor.com/network_tools/free_port_scanner.html

[SiLæncer]

TCP Port Forwarding is an easy to use application that will enable you to redirect traffic coming from specific TCP ports to other network interfaces. The program is able to handle forwarding on the same workstation or a remote one, connected to a different network. The client side as well as the forwarding one can be configured with great ease from the main window of TCP Port Forwarding.

Freeware

http://www.nsauditor.com/network_tools/tcp-port-forwarding.html

[SiLæncer]

Perform a wide range of tests on your network from your computer by turning to this comprehensive, all-in-one software application.

License: GPLv3

Changelog

What’s new?

    Code has been refactored and improved to simplify future developments.
    New documentation at https://borntoberoot.github.io/NETworkManager/

Improvements

    Network Interface
        Button “Clear DNS cache” moved tab “Information” #248
        Button “Release & Renew” moved tab “Information” #248
    PuTTY
        PuTTY log can be enabled in the settings/profile. Session output will be saved in a file. #278

Bugfixes

    Settings
        Portable modus was not displayed correctly. #277
    Crash on Server 2019 when select WiFi fixed #267
    Crash in IP scanner when IP address could not be detected fixed #268

Other

    Libraries updated
    Language files updated
    Resources (OUI, Ports, Whois) updated
    Code cleanup #261, #262

[close]

https://github.com/BornToBeRoot/NETworkManager

[SiLæncer]

This application will allow you to check if certain online ports you need are open and capable of allowing access to different services and websites on the internet.

MIT License

Whats new:>>

Updates to user can load a previous saved urls list. Also does a better check if domain exists before checking the port. Fixed small bug where domain and port came back positive when domain does not exist.

https://github.com/cjerrington/net-check

[SiLæncer]

Tool for monitoring network traffic (bandwidth) on selected interfaces. Features: graph and numeric values in real-time, works with any network connection, taskbar icon showing activity, statistical module, computer work time, distance traveled by cursor (mouse), predictions based on collected data, review of archival data.

Freeware

Whats new:>>

Uniform state persistence for different systems versions. HTTP(S) parser - extended requests timeouts when used authentication: none / Basic / Digest.

https://www.venea.net/web/nettraffic

[SiLæncer]

Ping multiple addresses and view the status of various hosts in a modern GUI, with this intuitive application that also includes a traceroute utility.

MIT License

Whats new:>>

Bug fix: A crash would occur if popup notifications were set to display only when minimized and a host status change occurred.

https://github.com/R-Smith/vmPing

[SiLæncer]

Slitheris Network Scanner is an advanced scanner that will quickly provide you with comprehensive information about your network, and so much more. This scanner goes above and beyond most by really digging deep for information and providing it quickly. It is capable of scanning a multitude of devices in a flash, and gives you more than just the run of the mill MAC Address but goes as far as detecting and identifying your OS and device type in addition to using proprietary TCP/UDP OS fingerprinting to detect operating systems like iOS and Android, and Windows, with over 80% accuracy.

Slitheris Network Scanner accurately finds pingable devices via standard multi-threaded ping sweeps as well as detecting unpingable hidden devices using ARP pings and various other advanced discovery technology. It is even equipped to detect true case-sensitive PC names for Windows computers and servers.

 Freemium

http://www.komodolabs.com/

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

- NAPTR record parsing bug fixed for DoH.
- TLS support for alert email has been added.
- Email library has been updated to v1.5.
- Baselist has beenupdated to 3514959.
- top.jsp -> header.jsp, bottom.jsp -> footer.jsp.

[close]

http://www.nxfilter.org/