Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

Terminal Services Manager shows which user is connected to the remote host, what processes they are running, and how much of the server resources (CPU and memory) they are using. You can send users messages, disconnect them from the server, or connect to their sessions remotely. With Terminal Services Manager you can send bulk messages to users, disconnect idle users, and end sessions of multiple disconnected users simultaneously. Terminal Services Manager allows you to work with several hosts at once.

Terminal Services Manager displays information in both table form and by drawing graphs of the usage of CPU, memory, and other resources over time for each server, session, and user.

Freeware (If after the 30-day period you would like to continue to use it, you must register the software.)

Whats new:>>

Fixed: command line for system-wide config (tsmanager.exe -systemwideconfig)

http://lizardsystems.com/terminal-services-manager/

[SiLæncer]

ThorroldFox IP Monitor is a simple and easy to use application that allows you to perform a particular action when your Internet IP address changes. This enables you to automate tasks such as updating dynamic DNS records (using scripts and clients such as ddclient).

ThorroldFox IP Monitor can be configured to send email alerts when a change in IP is detected and notify you of important events.

Freeware

Whats new: >>

- Updated libraries & licenses.
- Add support for newer JREs.
- Display message on successful/failed alert test.

https://www.thorroldfox.com/software/ipmonitor

[SiLæncer]

Monitor the download and upload speed of one or multiple network adapters from a simple desktop gauge, with this open-source program.

MIT License

Whats new:>>

Bug fixes.

https://github.com/oormicreations/VizNetGauge

[SiLæncer]

Wake On Lan provides you with startup/shutdown management for your machine and more.

It can be easily configured to wake up and shutdown a remote computer that is powered off, ping a target computer along with providing the status, wake up remote machines via the internet, perform emergency shutdowns, remote server connection, and allows you to listen for WOL packets in an effort to assist in network trouble-shooting.

License: Open Source

Whats new:>>

Improved validation in Properties panel, during copy/paste operations
Fixed some French translation mistakes

https://wol.aquilatech.com/

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

New features

Filtering and search capability added to views.
More expressive styling of Activity view.
Improved Blocker module styling.

Bug fixes

Constantly disabled Repair button in Stats Manager fixed.
NetLimiter settings were sometimes not saved, caused by XML serialization failure.
Filters for IP protocol created from Ask window had wrong name.

[close]

http://www.netlimiter.com/

[SiLæncer]

PortExpert provides you with a detailed view of your PCs cybersecurity. It automatically monitors all applications connected to the internet and gives you all the information you might need to identify potential threats to your system.

License: Freeware

Whats new:>>

[Refactoring] bcrypt.dll is missing error on Windows XP (Kyle_Katarn)
[Bug] Update ICS library to 8.59 and OpenSSL to 1.1.1b (Kyle_Katarn)
[Bug] Missing UninstallDisplayIcon in registry for installed version (Kyle_Katarn)

http://www.kcsoftwares.com/?portexpert

[SiLæncer]

Advanced PortChecker is a free application that you can use to scan an IP address for open ports. You can scan both TCP and UDP ports (at the same time) to check if they are allowing connections. Scanning information is displayed in real-time meaning you can already use the information as soon as it’s available!

License: GPLv3

Changelog

Code improvements
Design changes
Increased default scan thread count to 5
Updated help documentation
Upgraded Syncfusion to latest version
Upgraded to .NET Framework 4.8

[close]

http://codedead.com/?page_id=1135

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

What's new in 6.45beta42 (2019-May-08 12:44):

MAJOR CHANGES IN v6.45:
----------------------
!) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
!) ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap) as initiator (CLI only);
----------------------

Changes in this release:

!) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
*) capsman - fixed interface-list usage in access list;
*) cloud - added "replace" parameter for backup "upload-file" command;
*) crs3xx - correctly handle switch reset (introduced in v6.45beta31);
*) defconf - added "custom-script" field that prints custom configuration installed by Netinstall;
*) defconf - automatically set "installation" parameter for outdoor devices;
*) dhcp - create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
*) dhcpv4-server - added RADIUS accounting support with queue based statistics;
*) dhcpv6-server - added "insert-queue-before" and "parent-queue" parameters (CLI only);
*) discovery - correctly create neighbors from VLAN tagged discovery messages;
*) discovery - show neighbors on actual mesh ports;
*) ethernet - increased loop warning threshold to 5 packets per second;
*) gps - make sure "direction" parameter is upper case;
*) gps - strip unnecessary trailing characters from "longtitude" and "latitude" values;
*) hotspot - moved "title" HTML tag after "meta" tags;
*) ipsec - added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods (CLI only);
*) rb921 - improved system stability ("/system routerboard upgrade" required);
*) ssh - accept remote forwarding requests with empty hostnames;
*) ssh - improved remote forwarding handling (introduced in v6.44.3);
*) tr069-client - improved error reporting with incorrect firware upgrade XML file;
*) w60g - do not show unused "dmg" parameter;
*) w60g - show running frequency under "monitor" command;
*) winbox - show "LCD" menu only on boards that have LCD screen;
*) wireless - fixed frequency duplication in the frequency selection menu;
*) wireless - improved 160MHz channel width stability on rb4011;
*) wireless - improved installation mode selection for wireless outdoor equipment;
*) wireless - set default SSID and supplicant-identity the same as router's identity;
*) wireless - updated "china" regulatory domain information;

Other changes since v6.44.3:

*) bridge - correctly add interface list as bridge port (introduced in v6.45beta34);
*) bridge - fixed log message when hardware offloading is being enabled;
*) certificate - added "key-type" field (CLI only);
*) certificate - added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) (CLI only);
*) certificate - made RAM the default CRL storage location;
*) certificate - removed DSA (D) flag;
*) crs3xx - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
*) crs3xx - correctly handle switch reset (introduced in v6.45beta34);
*) crs3xx - fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
*) dhcp - create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
*) dhcp - do not require lease and binding to have the same configuration for dual-stack queues;
*) dhcp - show warning in log if lease and binding dual-stack related parameters do not match and create separate queues;
*) dhcpv4-server - added "client-mac-limit" parameter (CLI only);
*) dhcpv4-server - added "vendor-class-id" matcher (CLI only);
*) dhcpv4-server - improved stability when performing "check-status" command;
*) dhcpv4-server - replaced "busy" lease status with "conflict" and "declined";
*) dhcpv6-client - fixed status update when leaving "bound" state;
*) dhcpv6-server - added "address-list" support for bindings (CLI only);
*) dhcpv6-server - added "insert-queue-before" and "parent-queue" parameters (CLI only);
*) dhcpv6-server - added RADIUS accounting support;
*) dhcpv6-server - added "route-distance" parameter (CLI only);
*) dhcpv6-server - override prefix pool and/or DNS server settings by values received from RADIUS;
*) discovery - improved neighbour's MAC address detection;
*) discovery - limit max neighbour count per interface based on total RAM memory;
*) e-mail - include "message-id" identification field in e-mail header;
*) ethernet - added support for 25Gbps and 40Gbps rates;
*) export - fixed SMS "allowed-number" compact export (introduced in v6.45beta);
*) fetch - added SFTP support;
*) fetch - improved user policy lookup;
*) ike1 - adjusted debug packet logging topics;
*) ike1 - fixed rekeying process when NAT is detected (introduced in v6.45beta16);
*) ike2 - added support for ECDSA certificate authentication (rfc4754);
*) ike2 - do not send "User-Name" attribute to RADIUS server if not provided;
*) ike2 - fixed first child SA generation (introduced in v6.45beta34);
*) ike2 - improved XAuth identity conversion on upgrade;
*) ike2 - prefer SAN instead of DN from certificate for ID payload;
*) ipsec - added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
*) ipsec - added "ph2-total" counter to "active-peers" menu (CLI only);
*) ipsec - added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods (CLI only);
*) ipsec - added traffic statistics to "active-peers" menu (CLI only);
*) ipsec - do not allow adding identity to a dynamic peer;
*) ipsec - fixed policies becoming invalid after changing priority;
*) ipsec - general improvements in policy handling;
*) ipsec - properly drop already established tunnel when address change detected;
*) ipsec - renamed "remote-peers" to "active-peers" (CLI only);
*) ipsec - renamed "rsa-signature" authentication method to "digital-signature";
*) ipsec - replaced policy SA address parameters with peer setting;
*) ipsec - use tunnel name for dynamic IPsec peer name;
*) lte - added passthrough interface subnet selection;
*) lte - added support for manual operator selection;
*) lte - allow setting empty APN;
*) lte - allow to specify URL for firmware upgrade "firmware-file" parameter;
*) lte - do not show error message for info commands that are not supported;
*) lte - fixed session reactivation on R11e-LTE in UMTS mode;
*) lte - improved "info" command query;
*) lte - improved R11e-4G modem operation;
*) lte - renamed firmware upgrade "path" command to "firmware-file" (CLI only);
*) lte - show alphanumeric value for operator info;
*) lte - show correct firmware revision after firmware upgrade;
*) lte - use default APN name "internet" when not provided;
*) lte - use secondary DNS for DNS server configuration;
*) ospf - added support for link scope opaque LSAs (Type 9) for OSPFv2;
*) ospf - improved "unknown" LSA handling in OSPFv3;
*) ppp - added initial support for Quectel BG96;
*) proxy - increased minimal free RAM that can not be used for proxy services;
*) rb4011 - fixed SFP linking (introduced in v6.45beta6);
*) sfp - fixed S-35LC20D transceiver DDMI readouts after reboot;
*) sms - added USSD message functionality under "/tool sms" (CLI only);
*) sms - allow specifying multiple "allowed-number" values;
*) sms - fixed long message parsing (introduced in v6.45beta19);
*) sms - improved delivery report logging;
*) snmp - added "dot1dStpPortTable" OID;
*) snmp - added OID for neighbor "interface";
*) snmp - added "write-access" column to community print;
*) snmp - allow setting interface "adminStatus";
*) snmp - properly return multicast and broadcast packet counters for IF-MIB OIDs;
*) ssh - added new "ssh-exec" command for non-interactive command execution;
*) ssh - improved session rekeying process on exchanged data size threshold;
*) ssh - use correct user when "output-to-file" parameter is used;
*) supout - added IPv6 ND section to supout file;
*) supout - added "kid-control devices" section to supout file;
*) supout - changed IPv6 pool section to output detailed print;
*) switch - properly reapply settings after switch chip reset;
*) tftp - added "max-block-size" parameter under TFTP "settings" menu (CLI only);
*) tile - improved link fault detection on SFP+ ports;
*) tr069-client - added LTE CQI and IMSI parameter support;
*) tr069-client - fixed potential memory corruption;
*) tunnel - removed "local-address" requirement when "ipsec-secret" is used;
*) userman - added support for "Delegated-IPv6-Pool" and "DNS-Server-IPv6-Address" (CLI only);
*) w60g - prefer AP with strongest signal when multiple APs with same SSID present;
*) winbox - fixed crash when opening CAPsMAN menu (introduced in v6.45beta27);
*) wireless - fixed 5GHz interface disappearing after upgrade (introduced in v6.45beta19);
*) wireless - fixed "country-info" printing (introduced in v6.45beta27);
*) wireless - fixed incorrect IP header for RADIUS accounting packet;
*) wireless - improved DFS radar detection when using non-ETSI regulated country;
*) wireless - updated "india" regulatory domain information;
*) wireless - updated "new zealand" regulatory domain information;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

WifiInfoView scans the wireless networks in your area and displays extensive information about them, including: Network Name (SSID), MAC Address, PHY Type (802.11g or 802.11n), RSSI, Signal Quality, Frequency, Channel Number, Maximum Speed, Company Name, Router Model and Router Name (Only for routers that provides this information), and more...

When you select a wireless network in the upper pane of this tool, the lower pane displays the Wi-Fi information elements received from this device, in hexadecimal format.

WifiInfoView also has a summary mode, which displays a summary of all detected wireless networks, grouped by channel number, company that manufactured the router, PHY type, or the maximum speed.

License: Freeware

What's new: >>

Fixed the save command-line option to work according to the selected display mode (/DisplayMode command-line option).

http://www.nirsoft.net/utils/wifi_information_view.html

[SiLæncer]

cStatus is an advanced portable network scanning and monitoring tool, notably including a Traceroute function with the rare capability (under Windows) to return AS# (Autonomous System) number and network name for each hop traversed.

Freeware

Changelog

[fix] The autosave to file feature was not working correctly, several bug fixes
[fix] Some times in ip scanner tool backspace key was not working
[new] New option that adds the ability to enable/disable minimize to system tray
[new] New options in Chart form that allows hiding/showing error and ok series
[new] In main form, when the mouse is over the entry host, it will be shown which IP is being resolved

[close]

https://www.hnsoft.pt/cstatus

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

Improvements:

Improved behavior of "Route Changed" and "IP Address In Route" alert conditions that inspect routes and an edge case where they could potentially create duplicate route entries for targets utilizing these conditions.
Improved behavior of targets that fail to start over CloudConnect due to DNS resolution failure.
Improved messaging for "Test Connection" button in CloudConnect settings page.
Improved the messaging when a target is unable to start via CloudConnect due to an error occurring on the Agent.
Minor improvements to email validation in "Email Support" window.
Fixes
Resolved an issue where resetting and restarting a target with an active alert would result in a frozen interface.
Resolved a scenario where would get an error regarding comment migration when upgrading to new versions.
Resolved a scenario where subscription users weren't able to view certain Splash pages.
Resolved a typo in the CloudConnect session limit bar messaging.
Resolved a scenario where users could get a frozen interface when importing a target list over CloudConnect Agents and hitting their session limit.

[close]

http://www.pingman.com/

[SiLæncer]

Tool for monitoring network traffic (bandwidth) on selected interfaces. Features: graph and numeric values in real-time, works with any network connection, taskbar icon showing activity, statistical module, computer work time, distance traveled by cursor (mouse), predictions based on collected data, review of archival data.

Freeware

Whats new:>>

Added network utilities: ping, tracert, ipconfig, route, netstat, hostname. Changed default chart appearance (borderless).

https://www.venea.net/web/nettraffic

[SiLæncer]

NetworkTrafficView is a monitoring tool that captures information passing through your network adapter and displays general traffic statistics. The packets statistics is grouped by the Ethernet Type, IP Protocol, Source/Destination Addresses, and Source/Destination ports.

A variety of information is displayed on each line including Ethernet Type (IPv4, IPv6, ARP), IP Protocol (TCP, UDP, ICMP), Source Address, Destination Address, Source Port, Destination Port, Service Name (http, ftp, and so on), Packets Count, Total Packets Size, Total Data Size, Data Speed, Maximum Data Speed, Average Packet Size, First/Last Packet Time, Duration, and process ID/Name (For TCP connections).

Freeware

What's new: >>

Added imporved process detection and now it also works for UDP traffic. This feature works only when you run NetworkTrafficView as Administrator and the 'Trace TCP/UDP Processes' option is turned on.

http://www.nirsoft.net/utils/network_traffic_view.html

[SiLæncer]

Whats new:>>

Updated translations: Japanese, French, Portuguese / Brazilian.

https://www.venea.net/web/nettraffic

[SiLæncer]

MACAddressView is a MAC address lookup tool that allows you to easily find the company details (company name, address, and country) according to the MAC address of a product. MACAddressView also allows you to find MAC address records according to the company name, company address, or country name.

License: Freeware

What's new: >>

Updated the internal MAC Addresses database.

http://www.nirsoft.net/utils/mac_address_lookup_find.html