Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Support NxProxy for Android v1.0.1 has been added.
    RecatMan fetch size has been increased to 20.
    Baselist has been updated to 4723833

[close]

https://www.nxfilter.org/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

ike2 - fixed authentication process using EC digital signature (introduced in v7.10rc3);

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

GUI

    No changes

Server

    Re-bundle Web-Ui v2.2.40. Fixes #2239

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

This application features a collection of tools that target IP-related tasks, allowing one to easily send pings, perform check-ups, and monitor individual or multiple IPs.

License: MPL

https://decontev.com/#

[SiLæncer]

IP-Sniffer is a small command line tool that captures the IP traffic for a given network adapter. The tool is available for Windows and Linux systems. By using of protocol-, IP-address- and/or IP-port-filters a very special IP-traffic can be captured. An integrated Interprocess-Communication (IPC) client allows forwarding the filtered IP-traffic to other applications which run on the same system, e.g. the decontev IP-Proxy tool. (btw. IP-Proxy can be used to then forward this data to remote sites.) Additionally it can be set whether only the payload data or the entire IP-Frame shall be forwarded. Several filters can be defined and activated at the same time and for each of these filters a separate IPC channel can be opened. For easier and fast definition of filters an own configuration tool is provided.

License: MPL

https://decontev.com/#

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

    New features:

    Added column sorting and a seach box to Stats Manager.

    Fixed bugs:

    System crash when very small limits (<1 KB/s) were used on Forwarded connections.
    Service generated unnecessary messages.
    Several minor issues.

[close]

http://www.netlimiter.com/

[SiLæncer]

Axence nVision Free is the lite version of Axence nVision Pro with mapping and monitoring of unlimited devices and basic features including user monitoring, inventory taking, helpdesk, and device access control.

You can use it as a network discovery tool for scanning, discovering connected systems and devices, and it also will list their TCP/IP services. You can then create network maps for a visual aid. But that is not all, Axence nVision Free will also monitor your system in the event that a host is down, or a service has failed, it can also let you know if CPU utilization is high and can notify you via email or desktop alert if a new system has connected to the network keeping you fully apprised of all aspects of your network.

This free version does include:

Network discovery and visualization
nVision Server: network scanning, detection of devices and TCP/IP services, web access with browser
Network monitoring
Unlimited number of monitored devices
TCP/IP services: response time and correctness, packets received/lost statistics (PING, SMB, HTTP, POP3, SNMP, IMAP, SQL, etc.)
WMI counters: CPU load, memory usage, disk usage, network traffic, etc.
SNMP v1/2/3 counters: network traffic, temperature, humidity, power supply voltage, toner level, etc.
File distribution with use of WMI
MIB file compiler
Alerts and reports
Event/action alarms for network monitoring and SNMP and WMI counters
Notifications (on desktop, by e-mail, by SMS) and repair actions (program launch, computer restart, etc.)
Reports (for user, device, branch, network maps or entire atlas)
Hardware and software inventory
List of applications and Windows updates on single workstation (registry)
Software serial numbers (keys)
Overview of workstation hardware
System info (startup commands, user accounts, shared folders, SMART details, etc.)
User activity monitoring
User activity overview
Top 10 of visited web pages
And much more.

[close]

 Freemium

Free for up to 10 devices

Whats new:>>

Data updating, improvements, fixes.

https://axence.net/en/

[SiLæncer]

ManageWirelessNetworks is an alternative tool to the standard 'Manage Wireless Networks' of Windows (or 'Manage Known Networks' on Windows 10). It displays extensive information about every wireless profile on your system, even if the network adapter is not active. For every wireless profile, the following information is displayed: Profile Name, SSID, Connection Type, Connection Mode, Authentication, Encryption, Key Type, Auto Switch (Yes/No), Non Broadcast (Yes/No), Profile Position, Created Time, Modified Time, Wireless Key, and more...

ManageWirelessNetworks also allows you to edit a single profile with the standard editor of Windows, edit the XML of the wireless profile (For advanced users only !), quickly switch between manual and automatic mode, quickly switch between WPAPSK/WPA2PSK/AES/TKIP modes, rename the profile, rename the SSID, move profile position up and down, copy multiple wireless profiles to another wireless card on your system, and more...

Freeware

Whats new:>>

Added 'Sort By' toolbar button.

https://www.nirsoft.net/utils/manage_wireless_networks.html

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Changed: LAN-15271 In the First Run Wizard, cloud-first users are automatically directed to Cloud management.
    Fixed: LAN-15315 Valid Lansweeper licenses were seen as invalid when entered in the local web console.
    Fixed: LAN-15323 The “Lansweeper license” prerequisite check sometimes failed.

[close]

http://www.lansweeper.com/

[SiLæncer]

Whats new:>>

    route - added BFD;
    bridge - fixed incorrect host moving between ports with enabled FastPath;
    sfp - improved 10G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 based switches;
    ssh - fixed RouterOS SSH client login when using a key (introduced in v7.9);

http://www.mikrotik.com/thedude.php

[SiLæncer]

Changelog

    !) ipv6 - fixed DNS server processing by IPv6/ND services (CVE-2023-32154);
    !) route - added BFD;
    bgp - allow to filter BGP sessions by AFI;
    bgp - changed default VPNv4 import distance to iBGP value (200);
    bgp - do not check route distinguisher on import;
    bgp - fixed "as-override" and rename to "output.as-override";
    bgp - fixed "remove-private-as" and rename to "output.remove-private.as";
    bgp - show address family in advertisements;
    bgp - show approximate received prefix count by the session;
    branding - fixed custom logo (introduced in v7.;
    bridge - fixed HW offloaded STP state on port disable;
    bridge - fixed HW offloading for vlan-filtered bridge on devices with multiple switches (introduced in v7.;
    bridge - fixed incorrect host moving between ports with enabled FastPath;
    certificate - fixed displaying of certificate serial number;
    certificate - improved error reporting for Let's Encrypt certificate;
    certificate - restore available "key-usage" property options;
    conntrack - added read-only "active-ipv4" and "active-ipv6" fields to "/ip/firewall/connection/tracking" (CLI only);
    console - added timeout error for configuration export;
    console - changed time format according to ISO standard;
    console - disable output when using "as-value" parameter;
    console - fixed ":terminal inkey" input when resizing terminal;
    console - fixed "print without-paging" output in some cases;
    console - hide past commands with sensitive arguments;
    console - improved stability when using command completion;
    container - fixed "container pull" to support OCI manifest format;
    container - fixed crash due to missing system directories;
    container - improved default internal environment values;
    defconf - allow to use device factory preset credentials in Flashfig and Netinstall configuration files;
    defconf - fixed default configuration for RBSXTLTE3-7;
    dhcp-server - fixed accounting on RADIUS interim update;
    dhcpv4-server - added name for "IPv6-Only Preferred" option (108) in debug logs;
    doh - less verbose logging;
    firewall - added "endpoint-independent-nat" support;
    firewall - added "nth" option for IPv6 firewall;
    gps - expose GPS port for Quectel RM520N-GL;
    ike2 - improved child SA delete request processing;
    iot - added option to send Modbus function code commands directly from RouterOS (CLI only);
    ipsec - added hardware acceleration support for IPQ-5010 (hAP ax lite);
    ipsec - refactor public key authentication;
    ipsec - removed "ec2n185" and "ec2n155" values from proposal configurations;
    ipv6 - fixed IPv6 address removal;
    l3hw - added "autorestart" option to L3HW settings;
    l3hw - added advanced configuration options for fine-tuning the L3HW offload (l3hw-settings are cleared after upgrade or downgrade) (CLI only);
    l3hw - added error message and reset "l3-hw-offloading=no" if L3HW driver fails to start;
    l3hw - added monitoring options for L3HW utilization (CLI only);
    l3hw - fixed /32 route deletion;
    l3hw - fixed IPv6 ECMP route offloading;
    l3hw - fixed offloading of /32 IPv4 and /128 IPv6 routes;
    l3hw - fixed route table offloading during large volume of route updates;
    l3hw - improved host and nexthop offloading;
    l3hw - improved offloading of IPv6 hosts after L3HW driver restart;
    l3hw - improved performance of partial offloading;
    l3hw - improved route offloading after gateway change;
    l3hw - improved system stability for partial routing table offload;
    leds - fixed modem RAT mode indication on hAP ac^3 LTE6 WPS mode button LEDs;
    lora - improved gateway card detection and upgrade logic;
    lora - updated firmware version for LoRaWAN gateway (for R11e-LoRa8, R11e-LoRa9 cards);
    lte - added serving cell query for MBIM modems with necessary MBIM extension;
    lte - disable DHCP request filtering (UDP port 67) for Chateau 5G;
    lte - fixed APN authentication for R11e-LTE6 modem;
    lte - fixed Google Pixel 7 tethering support;
    lte - improved MBIM modem firmware reported error handling when settings RAT modes;
    lte - improved modem firmware upgrade stability for MBIM modems;
    lte - improved stability for Chateau 5G LTE modem firmware upgrade;
    lte - reduced SIM slot switchover time for MBIM modems with UUIC reset support;
    lte - stop "cell-monitor" on LTE interface configuration change for MBIM modems;
    mpls - added FastPath support;
    netwatch - added warning about non-running probe due to "startup-delay" (CLI only);
    ovpn - added initial support for V2 data transfer protocol;
    ovpn - improved system stability;
    poe - fixed bogous "poe-in-voltage" values when using DC jack for RB5009;
    pppoe - fixed PPPoE client scan when server is sending PADO messages without Service-Name tag;
    qos-hw - added QoS marking support for 98DXxxxx switches (CLI only);
    qos-hw - renamed VLAN "priority" field to "pcp" to avoid confusion;
    rose-storage - added support for multiple smb users and smb shares;
    route - improved system stability when removing multicast forwarding entries;
    routerboard - fixed memory test on CCR2116-12G-4S+ ("/system routerboard upgrade" required);
    routerboard - improved RouterBOOT stability for Alpine CPUs ("/system routerboard upgrade" required);
    routerboot - increased "preboot-etherboot" maximum value to 30 seconds ("/system routerboard upgrade" required);
    scheduler - fixed incorrectly started scheduler during reboot or shutdown;
    sfp - fixed "rate" monitor value for SFP interface on L009UiGS series devices;
    sfp - fixed combo-ether link monitor for CRS328-4C-20S-4S+ switch;
    sfp - fixed combo-sfp linking at 1G rate for CRS312 switch;
    sfp - improved 10G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 based switches;
    sfp - improved module compatibility with bad EEPROM data for RB4011, RB5009, CCR2xxx, CRS312 and CRS518 devices;
    sfp - improved Q/SFP interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches;
    sfp - improved SFP interface handling for RB4011, RB5009, CCR2xxx and CRS518 devices;
    sfp - improved system stability with certain SFP modules for CCR2216 and CRS518 devices;
    sfp - report EEPROM data even if "auto-init-failed" has occurred;
    smb - improved SMB v1 operation;
    sniffer - fixed large .pcap file limit;
    snmp - added "engine-id-suffix" setting and display actual "engine-id" as read-only property;
    snmp - added BGP peer table support IPv4 only (1.3.6.1.2.1.15.3.1);
    snmp - added new "mtxrInterfaceStatsTxRx1024ToMax" OID to MIKROTIK-MIB;
    ssh - added inline key "passphrase" property;
    ssh - fixed RouterOS SSH client login when using a key (introduced in v7.9);
    switch - added more precise "storm-rate" configuration options for 98DXxxxx switches (CLI only);
    switch - fixed storm rate on 10G links for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255 switches;
    system - improved watchdog reporting in log after reboots for several ARM and ARM64 devices;
    system - reduced RAM usage for SMIPS devices;
    tile - fixed support for microSD card;
    tr069 - added 5G SCC "SNR" parameter for modems that report it;
    upgrade - do not run manual upgrade if some packages are missing;
    ups - fixed updating of "battery-voltage" property;
    vrrp - added warning if "sync-connection-tracking=yes" while the global connection tracking is inactive;
    vrrp - added warning if the VRRP group is misconfigured;
    vrrp - added warning if VRRP or its interface does not have an IP address;
    vrrp - do not start connection synchronization if the global connection tracking is inactive;
    vrrp - fixed issue where disabled VRRP interface is affecting group;
    vrrp - fixed VRRP interface state on physical cable disconnection;
    vrrp - improved system stability on changing "group-authority" or "sync-connection-tracking";
    vrrp - renamed "group-master" to "group-authority" to avoid confusion with VRRP master;
    vrrp - send VRRP announcements only by "group-authority";
    w60g - improved interface stability for PTMP setups;
    webfig - added high-resolution favicon;
    webfig - allow limitless upper bounds for number range;
    webfig - allow to set "0" second time for fields with default values;
    webfig - changed time format according to ISO standard;
    webfig - display date and time in local time zone;
    webfig - fixed missing "WifiWave2" menu;
    webfig - fixed missing property names in "WifiWave2" menu;
    webfig - redesigned item configuration display;
    webfig - redesigned top menu bar;
    webfig - removed "Tools/Telnet" menu;
    webfig - removed auto-login with default credentials (admin without a password);
    wifiwave2 - avoid transmitting extra bytes at the end of the packet after stripping a VLAN tag;
    wifiwave2 - do not show placeholder transmit power values on interface startup;
    wifiwave2 - fixed CAP connection when provisioning "manager=capsman";
    wifiwave2 - fixed CAP interface name when using "name-format";
    wifiwave2 - fixed connectivity issues wheen access-list is used;
    wifiwave2 - fixed DFS channel availability warning (introduced in v7.9);
    wifiwave2 - fixed dynamic interface adding to bridge on CAP device;
    wifiwave2 - fixed inability to disable CAPsMAN when there are RADIUS-authenticated clients connected;
    wifiwave2 - fixed incorrect limits on number of interfaces in station mode;
    wifiwave2 - fixed interface name change when restoring backup;
    wifiwave2 - fixed key handshake timeout with re-associating clients;
    wifiwave2 - fixed OWE authentication compatibility with 802.11ax client devices;
    wifiwave2 - fixed OWE authentication compatibility with third-party client devices (introduced in v7.;
    wifiwave2 - fixed wireless throughput issues after 802.11r client roaming events on 802.11ac devices;
    wifiwave2 - improve protections against DoS attacks on WPA3-PSK;
    wifiwave2 - improved logging when an interface is unable to assign a VLAN tag to client;
    wifiwave2 - improved system stability when trying to exceed virtual AP limit;
    wifiwave2 - less verbose logging when WPA3-PSK clients are connecting;
    wifiwave2 - other system stability improvements;
    wifiwave2 - restore interface running state when connection to CAPsMAN is lost;
    winbox - added "MPLS/Settings" menu;
    winbox - added "Queues" configuration tab when creating new entries under "IPv6/DHCP-Server" menu;
    winbox - rename "URL" property to "Action data" under "IP/Web-Proxy/Access" menu;
    wireguard - fixed IPv6 traffic processing with multiple peers;
    wireguard - retry "endpoint-address" DNS query on failed resolve;
    x86 - ice driver update to v1.11.14;
    zerotier - make "identity" setting sensitive;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Freemium

Changelog

    Mac app crashes when clicking close too quickly on the splash screen.
    Importing and Exporting Workspaces is Broken.
    Agents don't fully verify the server they connect to.
    Fix an issue where expired maintenance didn't always show a useful message.

[close]

http://www.pingman.com/

[SiLæncer]

Tool for monitoring network traffic (bandwidth) on selected interfaces. Features: graph and numeric values in real-time, works with any network connection, taskbar icon showing activity, statistical module, computer work time, distance traveled by cursor (mouse), predictions based on collected data, review of archival data.

Freeware

Whats new:>>

Possible remember fixed beginning date for each statistics range (year, month, day, hour). Migration to default .NET Framework in Windows 11 and 10 (available for 8 and 7).

https://www.venea.net/web/nettraffic

[SiLæncer]

With Homedale you can monitor the signal strength of multiple WLAN Access Points. You can view a summary of all available access points with their signal strength, encryption [WEP/WPA/WPA2], speed, channel and other settings. You can also see the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging and create a screenshot.

Freeware

Whats new:>>

Locally administered mac address are shown in gray

https://www.the-sz.com/products/homedale/

[SiLæncer]

If you own several Bluetooth-enabled devices and you like to connect them to the PC, you might also want to regularly check the signal strength and make sure they are running at top performance. And this is where Bennett can come in handy.

Freeware

Whats new:>>

French translation added

https://www.the-sz.com/products/bennett/