Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

If you own several Bluetooth-enabled devices and you like to connect them to the PC, you might also want to regularly check the signal strength and make sure they are running at top performance. And this is where Bennett can come in handy.

Freeware

Whats new:>>

nRF52840 Dongle supported added

https://www.the-sz.com/products/bennett/

[SiLæncer]

SoftPerfect WiFi Guard is a tool for keeping a small WiFi network secure. It allows you to know immediately if your network is used without your knowledge. It's a specialized network scanner that runs through your network at set intervals and reports immediately if it has found any new connected devices that could possible belong to an intruder.

Freemium

Changelog

    Added: Instant detection of new devices via system ARP cache.
    Added: Configurable data retention setting for purging outdated info.
    Added: Support for Windows systems on ARM64 CPUs.
    Added: Custom 'Email Sender' field in SMTP settings.
    Improved: Database journal changed from WAL to DELETE mode for better cloud sync.
    Improved: Dark Mode appearance on Windows systems.

[close]

http://www.softperfect.com/products/wifiguard/

[SiLæncer]

LiveTcpUdpWatch is a tool for Windows that displays live information about all TCP and UDP activity on your system. Every line in the main table of LiveTcpUdpWatch displays the protocol (TCP/UDP/IPv4/IPv6), local/remote IP address, local/remote port, number of sent/received bytes, number of sent/received packets, connect/disconnect time (For TCP only), and the process (ID and path) responsible for this activity.

Freeware

Whats new:>>

    Added support for using the IP-Location files from https://github.com/sapics/ip-location-db for viewing country/city/ASN information of remote IP addresses.
    You can use all 3 types of CSV files: Country, City, and ASN.
    Both IPv4 and IPv6 files are supported.
    In order to use these IP-Location files, simply download the desired files and put them in the same folder of LiveTcpUdpWatch.exe with their original filename (For example: asn-country-ipv4.csv , asn-ipv4.csv, asn-ipv6.csv)
    Added 'ASN' and 'Organization' columns. These columns are filled if you download the ASN files (*asn-ipv4.csv and *asn-ipv6.csv )

https://www.nirsoft.net/utils/live_tcp_udp_watch.html

[SiLæncer]

Whats new:>>

    routerboard - improved RouterBOOT stability for Alpine CPUs ("/system routerboard upgrade" required);
    sfp - improved SFP interface handling for RB4011 device;

http://www.mikrotik.com/thedude.php

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    NxProxy auto-switch option has been removed.
    NxProxy for Android support has been added.
    Sub-admins log in to dashboard when they have the permission to dashboard.
    'Enable File Logging' option for Syslog setup has been added.
    Baselist has been updated to 4714398.

[close]

https://www.nxfilter.org/

[SiLæncer]

Perform a wide range of tests on your network from your computer by turning to this comprehensive, all-in-one software application.

License: GPLv3

Changelog

    Improvements:

    DNS Lookup
    Improved validation when adding/changing DNS server profiles #2282{:target="_blank"}
    Remote Desktop
    Allow . as domain to authenticate with local accounts #2305{:target="_blank"}
    TigerVNC
    Use port from default config instead of settings if creating a new group #2249{:target="_blank"}
    SNTP Lookup
    Improved validation when adding/changing SNTP server profiles #2282{:target="_blank"}
    Wake on LAN
    Change default port from 7 to 9 #2242{:target="_blank"}
    Group dialog
    Show an error next to the tab if the settings on the page contain errors #2309{:target="_blank"}
    Profile dialog
    Show an error next to the tab if the settings on the page contain errors #2309{:target="_blank"}
    SNMP options are now validates (same as group) #2309{:target="_blank"}

    Bugfixes:

    DNS Lookup
    Fixed app crash when editing DNS server profile in some rare cases #2282{:target="_blank"}
    Remote Desktop
    Adjust screen via Context Menu now only adjusts the screen size if Adjust screen automatically or Use the current view size as the screen size is enabled #2318{:target="_blank"}
    SNTP Lookup
    Fixed app crash when editing SNTP server profile in some rare cases #2282{:target="_blank"}
    Subnet Calculator
    Fixed a design issue with the calculate button in subnetting #2230{:target="_blank"}
    AirSpace Fixer{:target="_blank"} code optimized (only called if needed). This will also prevent a screenshot bug when the application is loading and a dialog is shown. #2253{:target="_blank"}
    Group dialog
    Fix default value for Remote Desktop sreen size #2293{:target="_blank"}
    Enable Remote Desktop Use gateway credentials only if logon method is set to Userpass #2316{:target="_blank"}
    Profile dialog
    Fix default value for Remote Desktop sreen size #2293{:target="_blank"}
    Enable Remote Desktop Use gateway credentials only if logon method is set to Userpass #2316{:target="_blank"}
    Fix validation rule for TigerVNC port #2309{:target="_blank"}
    Settings
    Settings view is now re-selected if the filter (search) is removed #2325{:target="_blank"}
    If settings are opened again, the last selected settings view is now selected (except an application was selected that has a settings view, then the settings view of the application is selected) #2325{:target="_blank"}

    Deprecated:

    Deprecated {: .label .label-red }

    Profile:

    Wake on LAN port, because it was inconsistent (If you select the profile, the port from the settings was used. If you right-click on the profile, the port from the profile was used) #2220{:target="_blank"}

    Other:

    Code cleanup #2100{:target="_blank"} #2172{:target="_blank"} #2254{:target="_blank"} #2325{:target="_blank"}
    Language files updated #transifex{:target="_blank"}
    Dependencies updated #dependencies{:target="_blank"}

    Add documentation for:

    Application > Port Scanner #2265{:target="_blank"}
    Application > Ping Monitor #2267{:target="_blank"}
    Application > Traceroute #2268{:target="_blank"}
    Application > DNS Lookup #2273{:target="_blank"}
    Application > Remote Desktop #2293{:target="_blank"} #2324{:target="_blank"}
    Application > PowerShell #2249{:target="_blank"} #2324{:target="_blank"}
    Application > PuTTY #2324{:target="_blank"}
    Application > TigerVNC #2248{:target="_blank"} #2324{:target="_blank"}
    Application > Web Console #2244{:target="_blank"} #2324{:target="_blank"}
    Application > SNMP #2289{:target="_blank"} #2293{:target="_blank"}
    Application > Wake on LAN #2242{:target="_blank"}
    Application > Whois #2236{:target="_blank"}
    Application > Subnet Calculator #2233{:target="_blank"}

    Update documentation for:

    Application > AWS Session Manager #2299{:target="_blank"} #2324{:target="_blank"}

[close]

https://github.com/BornToBeRoot/NETworkManager

[SiLæncer]

Whats new:>>

!) route - added BFD;
*) l3hw - fixed route table offloading during large volume of route updates;
*) l3hw - improved system stability when creating supout.rif file (introduced in v7.10beta5);
*) leds - fixed modem RAT mode indication on hAP ac^3 LTE6 WPS mode button LEDs;
*) sfp - fixed "combo-mode" copper functionality for CRS312 switch (introduced in v7.10rc1);
*) sfp - fixed "rate" monitor value for SFP interface on L009UiGS series devices;
*) winbox - added "MPLS/Settings" menu;

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetSpot is the first free Wi-Fi survey app for the rest of us. NetSpot features two major Wi-Fi troubleshooting modes: Discover and Survey. It is the only professional software for home and office Wi-Fi management, analysis, and visualization for Windows computers. You need just a few clicks to start your wireless network site survey. Just point to where you are on the map and watch NetSpot WiFi booster doing the magic.

 Freemium

Changelog

-Added: Full compatibility with Windows 11;
-Improved: Japanese localization for PDF reports;
-Fixed: Scan results for networks with the same BSSID, different SSID
parameters;
-Fixed: A crash upon import of global aliases;
-Fixed: Several minor glitches and bugs.

[close]

http://www.netspotapp.com/netspot-windows.html

[SiLæncer]

With Homedale you can monitor the signal strength of multiple WLAN Access Points. You can view a summary of all available access points with their signal strength, encryption [WEP/WPA/WPA2], speed, channel and other settings. You can also see the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging and create a screenshot.

Freeware

Whats new:>>

Crash prevented

https://www.the-sz.com/products/homedale/

[SiLæncer]

CurrPorts displays the list of all currently opened networking ports on your local computer. For each TCP/IP and UDP port in the list, information about the process that opened the port is displayed, including the process name, full path of the process, version information of the process (product name, file description, and so on), the time that the process was created, and the user that created it.

In addition, CurrPorts allows you to close unwanted TCP connections, kill the process that opened the ports, and save the TCP/UDP ports information to HTML file , XML file, or to tab-delimited text file. The program will automatically mark with pink suspicious ports owned by unidentified applications (applications without version information and icons).

A 64-bit version is available.

License: Freeware

Whats new:>>

    Added support for using the IP-Location files from https://github.com/sapics/ip-location-db for viewing country/city/ASN information of remote IP addresses.
    You can use all 3 types of CSV files: Country, City, and ASN.
    Both IPv4 and IPv6 files are supported.
    In order to use these IP-Location files, simply download the desired files and put them in the same folder of cports.exe with their original filename (For example: asn-country-ipv4.csv , asn-ipv4.csv, asn-ipv6.csv)

https://www.nirsoft.net/utils/cports.html

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

GUI

    Change log messages for Websocket errors
    Do not proceed if an appliance symbol cannot be downloaded. Ref #3466
    Delete a node or link from topology summary view using Delete key. Ref #3445
    Fix "Start the capture visualization program" checkbox works only one (first) time for a given link. Fixes #3442
    Let the selected link style applied when editing a link. Fixes #3460
    Fix hovered color shown in style editing dialog. Fixes #3460

Server

    qemu : with network adapter_type equal to "virtio-net-pci", fix the speed to 10000 and duplex to full. The values are actually fake. ( https://github.com/GNS3/gns3-gui/issues/3476 )
    Parse name for request to node creation from template
    Remove Xvfb + x11vnc support
    Require a Host-Only Network to start the VirtualBox GNS3 VM on macOS with VirtualBox 7
    Properly catch aiohttp client exception. Ref #2228
    Catch ConnectionResetError when waiting for the wrap console
    Fix open IPv6 address for HTTP consoles on controller. Fixes #3448
    Use proc.communicate() when checking for subprocess output As recommended in https://docs.python.org/3/library/asyncio-subprocess.html#asyncio.subprocess.Process.stderr

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

DNSDataView is an interface for the NSLookup tool that comes with Windows. It allows you to easily retrieve the DNS records (MX, NS, A, SOA) of specified domains.

You can use the default DNS server of your Internet connection, or use any other DNS server that you specify.

License: Freeware

What's new: >>

Fixed the refresh option to work properly when using the 'Load Windows DNS Cache' option.

https://www.nirsoft.net/utils/dns_records_viewer.html

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Fixed: LAN-15294 License keys could rarely not be correctly validated.
    Fixed: LAN-15304 License keys for Cloud users sometimes did not update in the on-prem console.

[close]

http://www.lansweeper.com/

[SiLæncer]

Whats new:>>

    Ike2 - improved system stability when renewing IKE SA (introduced in v7.10rc1);
    Ike2 - fixed authentication process using EC digital signature (introduced in v7.10rc3);

http://www.mikrotik.com/thedude.php

[SiLæncer]

Monitor internet activity across multiple network adapters through this easy-to-use tool, which also offers filtering capabilities.

MIT License

Changelog

New features

    Considerably refined the app packaging strategy, introducing support for more architectures and other advancements  (see #246 for additional details)
    Added button to clear all the current search filters quickly in inspect page
    Added Swedish translation  ( #213 )

Improvements

    Updated most of the existing translations to v1.2:
        German  ( #191 )
        Spanish  ( #203 )
        Persian  ( #193 )
        Korean  ( #205 )
        Polish  ( #244 )
        Romanian  ( #241 )
        Russian  ( #187 )
        Turkish  ( #192 )
        Ukrainian  ( #216 )
        Chinese  ( #214 )

    Renamed "Administrative entity" to "Autonomous System name" to avoid confusion
    Improved filter columns relative width to avoid the "Application protocol" label being cut when displayed in Swedish
    Footer URLs have been updated to include links to Sniffnet's official website and GitHub Sponsor page
    Updated docs including installation instruction for Arch Linux ( #185 )
    Minor improvements to packets and bytes number format
    Minor improvements to:
        code readability ( #248 )
        docs ( #235 )

Fixes

    Various issues have been fixed by the refined packaging strategy ( #199 , #220 , #223 , #224 , #225 , #242 )
    Solved a minor problem that caused flags to be slightly misaligned in inspect page table

[close]

https://github.com/GyulyVGC/sniffnet