Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Added: LAN-14405 Show warning message to use Modern Authentication in case Basic Authentication is used for mailing.
    Fixed: LAN-14424 vCenter scanning – vMotion data cannot be scanned after an upgrade
    Fixed: LAN-13908 Cross-site scripting (XSS) issue
    Fixed: LAN-13907 Directory traversal issue
    Fixed: LAN-13906 Cross-site scripting (XSS) issue
    Fixed: LAN-13904 Directory traversal issue
    Fixed: LAN-13903 Directory traversal issue
    Fixed: LAN-13901 Directory traversal issue

[close]

http://www.lansweeper.com/

[SiLæncer]

WinPing ist ein kleines Programm, mit dem Sie sowohl Verbindungen im lokalen Netzwerk, als auch im Internet prüfen, bzw. messen können.

Freeware

Whats new:>>

• Verifizierung und Test der Win-Ping-APP auf Windows 11 22H2
• Allgemeine Korrekturen und kleine Feineinstellungen in der Ping Anwendung

http://www.softwareok.de/?seite=Freeware/WinPing

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    bgp - added comment functionality for BGP VPN (CLI only);
    bluetooth - added unique advertise message filtering;
    bridge - fixed master port conversion;
    bridge - fixed R/M/STP bridge identifier on protocol-mode change;
    conntrack - improved system stability when processing SCTP connections on TILE;
    disk - improved external storage file system mounting, formatting and naming;
    dns - fixed resolving of FWD entries (introduced in v7.7beta8);
    dns - improved resolved static entry addition to address list;
    health - fixed firmware update process on CCR1036-8G-2S+ (introduced in v7.7beta8);
    hotspot - improved system stability when clients migrate between bridge ports or VLANs;
    ike2 - fixed rekey notify creation;
    interface - do not allow adding invalid "veth" interfaces;
    l3hw - fixed host offloading in a case of MAC address change;
    l3hw - fixed offloaded NAT for CRS309 switch;
    lte - added AT channel support for Telit FN990;
    netinstall - fixed netinstal procedure on RouterBOOT versions from 3.27 to 6.41;
    ovpn - added "CBC" postfix to AES cipher names;
    ovpn - added hardware acceleration support for IPQ-6010;
    switch - improved 10G, 25G, 40G and 100G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches;
    switch - increased the maximum value of "rate" for ACL rules;
    vrrp - always use slave interface MTU;
    vrrp - improved interface stability on configuration changes;
    webfig - fixed accessing of WebFig when "Interface" menu is disabled by skin;
    wifiwave2 - released packages for MMIPS, PPC, TILE and x86;
    x86 - added support for SUN 10G NICs;
    x86 - improved igc driver support;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

NetWorx is a simple, yet powerful tool that helps you objectively evaluate your bandwidth situation. You can use it to collect bandwidth usage data and measure the speed of your Internet or any other network connection. NetWorx can help you identify possible sources of network problems, ensure that you do not exceed the bandwidth limits specified by your ISP, or track down suspicious network activity characteristic of Trojan horses and hacker attacks.

Shareware

Changelog

    Added: speed units customisation.
    Improved: monochrome menu bar labels and icon on macOS.
    Improved: recent usage appears in usage reports instantly.
    Improved: Windows binaries support DEP and dynamic relocation.
    Improved: excluded apps are hidden from real time graph.
    Fixed: appearance on macOS with automatic system theme.
    Fixed: potential crash when using the speed meter.
    Fixed: taskbar graph appearance on Windows.
    Fixed: SNMP/UPnP monitoring on macOS.
    Removed: multiplier setting.

[close]

http://www.softperfect.com/products/networx/

[SiLæncer]

Whats new:>>

    Fixed: LAN-14462 AD computer and user scanning fails with the following error: “No credentials for this domain”.
    Fixed: LAN-14460 Values in deployment steps cannot be edited or deleted.
    Fixed: LAN-14459 Pinging assets in reports fail, except for the first asset pinged.

http://www.lansweeper.com/

[SiLæncer]

NetRouteView is a graphical alternative to the standard Windows command-line route utility (route.exe). It displays the list of all routes on your current network, including the destination, mask, gateway, interface IP address, metric value, type, protocol, age (in seconds), interface name, and the MAC address. NetRouteView also allows you to easily add new routes, as well as to remove or modify existing static routes.

Notice: Currently, this utility doesn't support IPv6.

License: Freeware

What's new: >>

    Added new columns: Interface Guid, Interface Index, Connection Name.
    Added 'Copy As Route Command' option, which copies to the clipboard the selected routes in the format of 'route add' command.

https://www.nirsoft.net/utils/network_route_view.html

[SiLæncer]

Monitor and configure all of your Windows apps’ network connections for maintaining a higher degree of privacy and security using this open-source application.

License: AGPL

Changelog

a100380 Bump core version
b090f2d Update SPN
362d987 Improve DNS validation regex doc
ddb5b55 Fix kext service log wording
d32cde0 Delete old kext service on startup
cc63e4e Merge branch 'develop' into fix/doh-failing
3bf791f Better wording for failed DoH request.
225da9c revert commit pushed by mistake
ecbe3fc Fix DoH base64 encoding
e260cc3 Fix DoH base64 encoding
a1a2338 Added shutdown request for kext
69b07cb Allow single character tld (for internal usage)
90ea592 Add support for snap

[close]

https://safing.io/portmaster/

[SiLæncer]

View and change your computer's network settings, ping addresses and run network scans via a user-friendly interface, without working with the command line window.

License: Open Source

Whats new:>>

    New interface and little errors fixed.
    A README file is available.
    A setup file is made to simplify the installation (and because the actual file was big).

https://github.com/L-Dlbcq/NUTs-Network-Utility-Tools

[SiLæncer]

Changelog

    certificate - improved Let's Encrypt logging and error recovery;
    disk - added support for manual RAM file system (TMPFS) creation (CLI only);
    dns - fixed regex matching (introduced in v7.7beta9);
    dns - fixed resolving of FWD entries (introduced in v7.7beta8);
    dns - require "write" policy for DNS cache flushing;
    dns - respond with lowest TTL for inner queries containing A, AAAA, CNAME chains;
    ike1 - disallow "remote-id" setting for identity;
    interface - show RTL8153 CDC Modem Device as ethernet;
    ipsec - added "current-address" parameter for peers with DNS address;
    leds - fixed default LED configuration on netFiber 9;
    leds - fixed turning off LEDs after system shutdown;
    lte - properly show leading zeros in MCC and MNC strings;
    modem - added USB tethering support for Google Pixel 7 devices;
    mpls - fixed assigning of explicit null label for IPv6;
    ovpn - added support for IPv6 tunneling;
    switch - improved 10G, 25G and 40G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches;
    switch - improved system stability when routing traffic over CPU on 98DX224S, 98DX226S, 98DX3236, 98DX8208 switch chips (introduced in v7.7beta3);
    swos - fixed SwOS configuration changes from RouterOS;
    wifiwave2 - added information of per-station throughput in the registration table;
    wifiwave2 - fixed authentication issues (introduced in 7.7beta8);
    winbox - added "bus" parameter for "USB Power Reset" command on Chateau ax;
    winbox - added missing "force" parameter for new "IP/DHCP Server/Options" entries;
    winbox - added missing "vlan-id" column under "IP/Hotspot/Hosts" table;
    winbox - do not show LACP related status parameters for other bonding types;
    winbox - fixed default MTU value for CAP interfaces;
    winbox - increased maximum number of Winbox read-only sessions 5->25;
    winbox - removed bogus VRF tab from "Interface" menu;
    winbox - show "Switch" menu on NetFiber 9;
    winbox - show dynamic comment in WifiWave2 registration table;
    wireless - fixed "nstreme" related parameter control in skins;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Whats new:>>

    Improve rule doc
    Add update versions debug data

https://safing.io/portmaster/

[SiLæncer]

DNSQuerySniffer is a network sniffer utility that shows the DNS queries sent on your system. For every DNS query, the following information is displayed: Host Name, Port Number, Query ID, Request Type (A, AAAA, NS, MX, and so on), Request Time, Response Time, Duration, Response Code, Number of records, and the content of the returned DNS records.

You can easily export the DNS queries information to csv/tab-delimited/xml/html file, or copy the DNS queries to the clipboard, and then paste them into Excel or other spreadsheet application.

Freeware

Whats new: >>

Added 'Show High Resolution Duration' option. When it's turned on, the values in the duration column are displayed in microsecond resolution (e.g: 1.524 ms)

http://www.nirsoft.net/utils/dns_query_sniffer.html

[SiLæncer]

Perform a wide range of tests on your network from your computer by turning to this comprehensive, all-in-one software application.

License: GPLv3

Changelog

    New Feature:

    Bit Calculator #1684 (See documentation for more details)
    Global application DNS settings under Settings > Network > DNS added #1733

    Improvements:

    Performance of DNS resolutions improved #1733
    Detect new DNS servers if they have been changed e.g. by a new network connection (LAN, WLAN) or VPN connection #1733
    Error messages for failed DNS resolution improved #1733
    Check if folder exists in export dialog #1760
    First run dialog
    PowerShell theme added #1761

    Bugfixes:

    IP Scanner & Port scanner
    Error message was not displayed when a single hostname could not be resolved #1733
    Fixed a bug in Dragablz that in certain circumstances locks the tab when you right-click on it and try to move it (See #132 & #1702 for more details) #1712
    Lookup - OUI, Lookup
    Input cannot end with “;” #1515

[close]

https://github.com/BornToBeRoot/NETworkManager

[SiLæncer]

HTTP Toolkit offers automatic interception of HTTP and HTTPS traffic from most clients, including web browsers like Chrome and Firefox, all CLI tools, and back-end languages (Node.js, Python, etc. Ruby, and more).

License: Open Source / Freemium

https://httptoolkit.tech/mock

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Whats new:>>

    New features:

    An option to use a single Y axis for both stream in Chart

    Fixed bugs:

    Occasional BSOD when using Kill all connections command
    Occasional system hang when using VirusTotal reports (with Ask rule on whole machine)
    Chart options didn't work sometimes
    Chart last X axis label disappearing

http://www.netlimiter.com/

[SiLæncer]

A robust ping monitoring tool for automatic checking connection to network hosts. By making regular pings it monitors network connections and notifies you about detected ups/downs. EMCO Ping Monitor also provides connection statistics info, including uptime, outages, failed pings, etc. You can easily extend functionality and configure EMCO Ping Monitor to execute custom commands or launch applications when connections are lost or restored.

Freemium

Changelog

Resolved issues

    UI sometimes crashes on sound and balloon notifications
    Internal Server Error: can't find the Quality property

[close]

http://www.emco.is/products/ping-monitor/features.php