Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

Fixes

Fixed a Common Language Runtime error impacting some users.

[close]

http://www.pingman.com/

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Cryptocurrency, Real Estate, Pets categories have been added to Cloudlist.
    Cryptocurrency, Pets categories have been added to Jahaslist.
    Well-known domain list has been updated.
    Djmod.jar has been updated to v3.3.1.
    Bypass system block if it's a request from the server.
    Baselist has been updated to 3922792.
    NxClassifier ruleset has been updated to 574.

[close]

http://www.nxfilter.org/

[SiLæncer]

NetLimiter is an internet traffic control and monitoring tool.

You can use NetLimiter to set download/upload transfer rate limits for applications or even single connection and monitor their internet traffic.

There are three available versions of NetLimiter - Pro, Lite, and Freeware Monitor.

Changelog

Bug fixes

    Minor memory leak in Connection Log.
    Incorrect time displayed in Connection Log when daylight saving time starts.

New features

    Location and domain name (when available) for an IP address is now displayed in ASK window for pending requests.
    Stats Manager now does not start parsing of the Stats database after the launch.
    Lots of internal improvements.

[close]

http://www.netlimiter.com/

[SiLæncer]

A robust ping monitoring tool for automatic checking connection to network hosts. By making regular pings it monitors network connections and notifies you about detected ups/downs. EMCO Ping Monitor also provides connection statistics info, including uptime, outages, failed pings, etc. You can easily extend functionality and configure EMCO Ping Monitor to execute custom commands or launch applications when connections are lost or restored.

Freemium

Changelog

    Resolved issues:

    An error happens when changing preferences in the program

[close]

http://www.emco.is/products/ping-monitor/features.php

[SiLæncer]

Packet Sender is an intuitive and very simple to handle piece of software created to assist you in sending as well as receiving TCP and UDP packets to a preferred address in your network.

License: Donationware (GPLv2)

Changelog

    There is now a toggle switch for Dark Mode. It seems some of you actually prefer light mode (you monsters). The light mode is actually just dark styling turned off in attempt to better reuse the system OS style
    Some touch-ups to the Dark Mode (maybe you will turn it back on?)
    Macros now support re-use during persistent connections
    The snapcraft snap has finally been fixed and a new build released

[close]

https://packetsender.com/

[SiLæncer]

TcpLogView monitors the opened TCP connections on your system, and adds a new log line every time that a TCP connection is opened or closed. For every log line, the following information is displayed: Even Time, Event Type (Open, Close, Listen), Local Address, Remote Address, Remote Host Name, Local Port, Remote Port, Process ID, Process Name, and the country information of the Remote IP (Requires to download IP to country file separately.)

Freeware

Whats new: >>

    Added 'Process User' column.
    Updated to work properly in high DPI mode.

http://www.nirsoft.net/utils/tcp_log_view.html

[SiLæncer]

Nethor is a free packet analyzer and visualizer for use with Microsoft Windows. It allows working with multiple open PCAP/PCAPNG files as one in an intuitive and simple user interface. The application does not use any third-part modules or plug-ins, nor the Windows Registry.

License: Open Source

Changelog

    Integrated diagnostic tool Traceroute with Geo location
    Integrated diagnostic tool Ping
    Integrated diagnostic tool DNS Lookup
    Added new feature “Auto fit columns” to Packet Table
    Removed “beep” when message boxes are shown
    Improved GUI artifacts
    Fixed several minor bugs

[close]

https://nethor.com/

[SiLæncer]

GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

GUI

    Fix project does not load anymore. Fixes #3140
    Do not connect to server while waiting for user to accept/reject SSL certificate. Fixes #3144
    Fix invalid server version check request. Fixes #3144
    Upgrade dependencies
    Add terminator as a predefined custom console option

Server

    Release Web UI version 2.2.20
    Fix packet capture with HTTPS remote server. Fixes #1882
    Sync appliance files and remove old ones after sync with online repo. Fixes #1876
    Upgrade dependencies
    Fix export for missing files
    Fix issue when trying to export temporary Dynamips files.

[close]

DL -> https://github.com/GNS3/gns3-gui

https://www.gns3.com/software

[SiLæncer]

Changelog

    Improvements:

    Improved UDP packet generator reliability after a network change.
    Improved PingPlotter’s ability to connect during startup when installed as a service.

    Fixes:

    Fixed “UNIQUE constraint failed: Comments.ID” error, which affected some users with persistent comments.
    Fixed a critical issue that would prevent PingPlotter from shutting down and periodically cause Agents to stop collecting data.
    (Windows) Fixed an issue in which the Windows Service was unable to shut down in certain scenarios (especially on Cloud Agents).
    (Windows) When updating or modifying a version 5.19.x install, PingPlotter will no longer incorrectly prompt for a reboot.
    (Windows) Closing a PingPlotter Cloud Agent that also has an expired Professional trial associated with the install will no longer pester you for confirmation.
    (Web UI) The Web UI will no longer display “ArgumentNullException obj can not be null” during CloudConnect Controller sessions sync.

[close]

http://www.pingman.com/

[SiLæncer]

PortExpert provides you with a detailed view of your PCs cybersecurity. It automatically monitors all applications connected to the internet and gives you all the information you might need to identify potential threats to your system.

License: Freeware

Whats new:>>

[Refactoring] Code signing certificate renewal (Kyle_Katarn)
[Refactoring] Update ICS library to 8.65 and OpenSSL to 1.1.1i (Kyle_Katarn)

http://www.kcsoftwares.com/?portexpert

[SiLæncer]

Whats new:>>

Add function to show available networks only

https://github.com/emoacht/Wifinian

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    bonding - improved system stability when disabling/enabling bonding ports;
    bridge - improved bridge stability when host changes port (introduced in v6.47);
    console - require "write+ftp" permissions for exporting configuration to file;
    console - updated copyright notice;
    crs3xx - added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release;
    crs3xx - fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
    crs3xx - fixed packet transmit in 5Gbps link rate for CRS312 device;
    crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
    dhcp - fixed link state checking for DHCP client;
    ethernet - fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
    ethernet - improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
    fastpath - fixed IP packet receive on bridge and bonding interfaces when destination MAC address match with slave port MAC;
    health - fixed voltage monitor on BaseBox5 devices;
    ike2 - added "MS-CHAP-Domain" attribute to RADIUS requests;
    ike2 - fixed DH group negotiation with EAP;
    ike2 - fixed EAP MSK length validation (introduced in v6.48);
    ike2 - fixed initial traffic selector's protocol and port in transport mode;
    ipv6 - improved system stability when parsing IPv6 options;
    lora - added additional predefined network servers;
    lora - added option to hide CRC error messages in monitor;
    lora - improved downlink transmission;
    ospf - fixed type-7 LSA translation to type-5;
    ovpn - fixed route cache entry leak when establishing a new session;
    poe - do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
    ppp - do not fail "at-chat" command when issued on disabled PPP interface;
    ptp - improved management service stability when receiving bogus packets;
    quickset - prefer 5GHz interface for WiFi scan in CPE mode;
    rb3011 - improved system stability when changing RouterBOARD settings (introduced in v6.48);
    snmp - fixed SNMP trap agent address;
    supout - fixed "topic" column presence in "Log" section;
    switch - improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
    switch - improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
    telnet - do not send options if connecting to non standard port;
    telnet - fixed server when run on non standard port;
    tr069-client - improved management service stability when receiving bogus packets;
    upgrade - fixed upgrade procedure on 16MB devices;
    upgrade - improved "long-term" upgrade procedure on SMIPS devices;
    user - fixed "skin" configuration for user groups (introduced in v6.48);
    webfig - allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
    webfig - do not corrupt settings when starting "Wireless Sniffer";
    webfig - do not move top right menu in opposite direction when scrolling horizontally;
    webfig - do not show newly created SMB shares as invalid;
    webfig - fixed new interface addition;
    webfig - show "Interfaces" menu by default after logging in;
    webfig - show "network-mode" for LTE modems that support it;
    winbox - added "Channel" parameter under "System/Console" menu;
    winbox - do not show empty "CPU Frequency" parameter under "System/Resources" menu;
    winbox - fixed "reachable-time" value unit under "IPv6/ND" menu;
    winbox - fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
    winbox - fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
    winbox - hide "Allow Roaming" parameter on LTE modems that do not support it;
    winbox - increased "target" field limit to 128 under "Queues" menu;
    winbox - renamed IP protocol 41 to "ipv6-encap";
    winbox - show "LCD" only on boards that have LCD;
    winbox - show "System/Health" only on boards that have health monitoring;
    winbox - show "activity" column by default under "IP/Kid Control/Devices" menu;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Added: LAN-8053 An auto-update feature is now available under ConfigurationServer Options that can be enabled to automatically keep Lansweeper scan servers up-to-date
    Changed: LAN-4287 Help desk email and email alerts now support Modern Authentication and Microsoft Graph for Office 365 mailing, as Microsoft is deprecating Basic Authentication
    Changed: LAN-5375 Intune and Office 365 data can now be scanned with a new v2 scanning target that uses Modern Authentication and Microsoft Graph, as Microsoft is deprecating Basic Authentication
    Changed: LAN-8706 Optimized the way IT Asset Data Platform setting changes are read from the Lansweeper database, to reduce the amount of database querying
    Fixed: LAN-3580 A SQL Server instance that is removed from a Windows computer fails to be removed from the computer’s asset page in Lansweeper after a rescan
    Fixed: LAN-3220 Active Directory User/Group Path scans of large OUs can take several days to complete
    Fixed: LAN-4490 Character encoding issue in schedule names under DeploymentScheduled Deployments
    Fixed: LAN-1663 Character encoding issue in the popup you see when hovering over a user in the web console
    Fixed: LAN-8083 If a Linux computer has a software installed with left or right quotation marks in its software properties, Lansweeper fails to scan the computer’s full software inventory
    Fixed: LAN-8511 If the FQDN field of an asset is empty and the asset is edited, the field is sometimes filled with a blank string, which causes incorrect results in certain reports
    Fixed: LAN-8248 Lansweeper fails to scan software info of Arch Linux distributions
    Fixed: LAN-4137 OS information of non-Windows assets is not displayed on the AssetsLsAgent Assets page
    Fixed: LAN-8751 Path traversal issue related to certain Lansweeper configuration pages
    Fixed: LAN-8784 Software scanning inconsistencies between LsPush and agentless scanning, causing incorrect software history entries to be generated
    Fixed: LAN-4680 The help desk ticket API fails to process ticket requests whose ticket description includes line breaks or other formatting
    Fixed: LAN-9291 The Lansweeper scanning service is stuck in the Starting state when updating from a version older than 8.0 to the latest Lansweeper release
    Fixed: LAN-5020 The list of available action parameters under ConfigurationAsset Pages in the web console does not mention the {mac} parameter though this parameter is functionally available
    Fixed: LAN-9043 The popup for adding an OS to the license list in the OS license compliance module fails to load
    Fixed: LAN-2305 The unique identifier of a Windows computer is sometimes erroneously set to the computer’s IP address instead of its domainname combination, resulting in duplicate assets for the same machine
    Fixed: LAN-5649 The unique identifier of manually created monitor and other types of assets is incorrectly formed sometimes

[close]

http://www.lansweeper.com/

[SiLæncer]

Universal Radio Hacker is a fascinating, cross-platform application (also available for macOS and Linux) which allows you to accurately investigate unknown, "in the wild" wireless protocols of most IoT devices.

Donationware  /  GPLv3

Changelog

allow incomplete complex files to load fix #848
add desktop entry to snap
Use list for checksum data_ranges

[close]

https://github.com/jopohl/urh

[SiLæncer]

Track the quality of your Internet connection and find out the packet losses and ping stability in real time using this lightweight app.

License: GPLv3

https://github.com/g3ar/conntester