Thema: discontinuity On Skynet Solved For Ever?!

[Chrisse]

@sepehr...
 
You wrote you are using a SS3 card. I am not sure if this will work on a card like this...
I haven´t got any experience with a card like this (SS3), and therefore be very carefull what you are doing, as far as I can see this has not been done before. It might be better waiting till somebody else who knows better about this type of cards, gives some more information!

Anyway if you are really and absolutely sure that you want to try anyway and carry the risk of ruining your card......u understand??    OK??


GC

[spoke1]

This hardware patch is only for SS2 and no other card. So this patch wont work with your SS3(made by geniatech), sorry.

On my system are the same problems with discontiuity on W3 with tuner=11361000 and i does not really know what is the matter. The other tuner's on W3 never made this problem.

Last not least i look athe the photos from you dish,  , and i think that your problems results from them. The incoming flow allows no stops, we know.  With a squint LNC i think it looses too many informations. I had had same problem on 8°W when they made the speed only a little bit faster. Further i had a 60cm dish for more than two years and it works perfektly, now i need a 100cm.

[pogo13]

i have heard, that some ss3 cards have 75 MHz oszilators, so see please on the oszilator befor you will change it.

regads
pogo

[sepehr]

On my system are the same problems with discontiuity on W3 with tuner=11361000 and i does not really know what is the matter. The other tuner's on W3 never made this problem.

Last not least i look athe the photos from you dish,  , and i think that your problems results from them. The incoming flow allows no stops, we know.  With a squint LNC i think it looses too many informations. I had had same problem on 8°W when they made the speed only a little bit faster. Further i had a 60cm dish for more than two years and it works perfektly, now i need a 100cm.

i think we are getting somewhere, i massively had doubt that this could be dish or lnb problem.spoke1 would you mind answering these :
1.what do you mean by  a squint LNB?, I mean is there a standard form for LNB?
 This Would Be Great if you give me some pictures
2.what other providers do you suggest me to use ?

[Jürgen]

Squint means off-centered, like the W3 heading one, that's shown on your pictures.
Keep in mind, the effective dish size shrinks as a function of that side offset angle.
For my 1m dishes (sse my sig), an LNB 6° off center reduces the gain to ~ 85 cm equivalent.
9° off looks like 70cm, more or less.

On prime focus dishes like yours, that effect may even be bigger, theoretically.

Better for multifeeds over a bigger angle range are the special toroidal dishes, best then with a good sub reflector. But those aren't avalable in all sizes, and they cost a real fortune...

[sepehr]

thanks that was SO informative,i wish the forums had the thanks button

[spoke1]

2.what other providers do you suggest me to use ?

This is a very very big problem for the moment. There are some Provider who stopped their service via sat. And some other providers crypt their system. At last week there where only bad news around grabbing.  We only can wait what will be. Have you tested  this one again:

#7°O Eutelsat W3
#OpenSky                    edit 28.05.2007
#Frequenz=11262000 H 27500000 A
#Pids =

#EON                          edit 28.05.2007
#Frequenz=11299000 H 13500000 A
#Pids =

#Linkstar                    edit 28.05.2007
#Frequenz = 11554000 H 27500000 A
#Pids=

Perhaps they doesn't work only in the moment when you where testing. This could be sometimes. 

[sepehr]

I changed My Direction to w6 but i STILL have Discontinuity 
this is the website of the company made this SS3  (and my driver is there)
http://www.technicalsat.com/
this is where i get my stream reader:
http://dvbonline.net/download.php?view.40

I am using skynet skynet.R32.1.22
this is my skynet.ini (for both w3 and w6 which w6 is active for now)

Code: [Auswählen]

err_dump_period=60000
autosave_time=30000
save_segments=1

ww=1024
wh=768
refresh=202
tray=1
font=Comic Sans MS
font_size=17
xfont=-*-*-*-*-*-*-*-*-*-*-*-*-*-cp1251

processor=0

name_format=E/*/s_m_p_cR.E
# P - pid hex
# p - pid dec
# M - mac
# m - lower case mac
# D - destination addr hex
# d - destination addr dec
# S - source addr hex
# s - source addr dec
# C - counter hex
# c - counter dec
# E - extension
# N - size
# R - real name (if known)
# * - mark (from rules.txt)

incomplete=E:\Skynet\in
temp=E:\Skynet\temp
ok=E:\Skynet\Done

incomplete_min_size=20M
incomplete_%=99

timeout_100k = 500
timeout_500k = 800
timeout_1m   = 1000
timeout_5m   = 1500
timeout_10m  = 1800
timeout_50m  = 2200
timeout_100m = 2500
timeout_500m = 3000
p2p_add = 6000

rep_timeout=20000
tcp_timeout=300000

p2p=1
ftp=1
torrent=1
kazaa=1
irc=1
mirc=1
http=1
nntp=0

cache_scan=10000
discon_log=0
zoom=300M
list_size=170

diseqc=POSITION_A
#diseqc=HIGH_BAND,HORIZONTAL,POSITION_A,OPTION_B

#C Band
#lnb=5150000,0,5150000

#Ku Band
lnb=9750000,10600000,11700000




# -- 7e -- Most Used Tested
# OpenSky w3
#tuner=11299000,H,13500000,A
#pids=

#----------------------------

# -- 7e --   tested
# eVOLVE 
#tuner=11554000,H,27500000,A
#pids=
#pids=

#----------------------------
# -- 7e --  Tested(High DIS)
# EON
#tuner=11260000,H,27500000,A
#pids=

#----------------------------
# -- 7e -- 
# Uknown
#tuner=11449000,V,27500000,A
#pids=
                                               >>><<<<<<    #------ W6 Sattelite ------#   >>><<<<<<



#--------- internetcon(Tested)
#tuner=11449000,V,300000,A
#pids=
#-------------


# Tested on w6
#---------
#tuner=11132400,V,300000,A
#pids=
#-------------

#-------------
# First AMS
#tuner=11596000,h,26662,A
#Pids=

#-------------
#tuner=11617000,V,27500,A
#Pids=

#
#SKy Logic Not Tested
#-------------
#tuner=11617000,V,27500,A
#Pids=
#tuner=11640000,h,27345,A
#Pids=
#----------
# horzon
#tuner=11672000,h,20742,A
#Pids=
#----------
# AMS 2ND
#tuner=11324000,V,30000,A
#Pids=
#----------
#space gate
tuner=11345000,H,28782,A
Pids=
#----------
on friends in forum told me to scan only active pids to reduce discontinuity,i did it but i doesn't work.
I really wonder what is it that I DON'T but others do to not to have discontinuity!

[spoke1]

Have you tested pid by pid?

#--------- internetcon(Tested)
#tuner=11449000,V,300000,A
#pids=
then only
'pids=

if there is no discontinuity at 1*0* & 1*0* you can test:
#pids=

If there is no discontinuity take next pids.

Why should you do this??

Sometime thre pids working who dont 'like' an other pid. And this makes discontinuity. I have this problem on W3/EON, so i only use xxxx,yyyy,zzzz and there are many more pids.

To the end of skynet.ini: you have written pids=xxxx, this is universal pid and wont work with skynetR32!!!!!

[sepehr]

ok i'm doing it right now
so you say that pids may conflict?

edit:is it possible that 2 pids don't conflict at a time but they may conflict at another time?

edit:this is my skynet
look at suspended downloads,is suspended downloads my problem or not?(or the downloading user has canceled downloading?)
and as you see although using only one pid at a time i have discontinuity. any ideas?

[sepehr]

if you can not see picture here it is:
hxxp://img2.freeimagehosting.net/image.php?3982291d81.jpg

[spoke1]

Sorry, your picture will not load at freeimagehosting.net. Server timeout

[sepehr]

[spoke1]

1. Discontinuity, my last ideas.
 Is there something working who makes your CPU speed sometimes slow, a firewall, an activ virusscanner or other?

2. For the stopped downloads
You can make nothing to change this. People stops their download, timeout is coming and delete the dl. from skynet(R32).

These two things have to do with one another nothing. Rather the missing segment in the fifth row (.rar) from above. This shows me that the stream has a stop because there is no beam for a little moment or look to 1. When it is sometimes only this lonly one this should not be a problem.