Thema: Video & Audio Converter diverses...

[SiLæncer]

A user-friendly media encoder/decoder to help you enhance your videos and that packs several dedicated features for streamed media content.

Open Source

Changelog

    Configure spectrum resolution to higher resolution 768x768 from 854x480
    Disable low power mode while using QSV
    Drop level profile configuration on video codec for QSV (Quicksync are not support it)
    Do not show image if thumbnail are not exists
    Fixup debug mode are not run correctly
    Fixup encoding logic in some cases
    Fixup issue with video codec detection issue (QSV in primary, other codec is config only)
    Fixup issue with audio codec detection issue (Copy profile)
    Fixup issue with audio codec profile enable unconditionally after try to lock profile without set saved media file
    Fixup missing main10 video profile on QSV
    Properly clean all temporary files and process after application close
    Specify ffplay to show audio waveform only if file detected as audio, if detected as video then show video

[close]

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

Vidiot is a non-linear video editor targeted for home video editing. It supports operations like compositing, scaling/rotating, adding transitions, trimming, etc.

Features:

Non-linear video editor
Video converter
Video compositing
Trimming
Cut/Move/Drag and drop
Edit during playback

License: Open Source

Changelog

    Improved multithreaded decoding/encoding performance. (r2834)
    Fixed: Thumbnails sometimes only show a part of the video during editing. (r2832)
    Fixed: Clicking on timescale sometimes selects clips, and doesn't move cursor. (r2830)
    Added French translation. (r2829)

[close]

http://sourceforge.net/projects/vidiot/

[SiLæncer]

Changelog

    Fixup application crash while OTA download is on progress in some case
    Fixup h264 for nvidia gpu encode error while aqstrength is included
    Fixup video frame rate information that are not show correctly in some case
    Introduce loading interface while load or initialize new media file
    Introduce new application logo and design
    Introduce support for drag and drop media file into application on main menu
    Only show short codec name for media file
    Re-design all user interface component
    Re-design message information interface
    Re-written logic for create media screenshot and audio spectrum

[close]

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

MediaHuman Audio Converter helps you convert music to the most popular audio formats: WMA, MP3, WAV, AAC, OGG, FLAC, AIFF or the Apple Lossless Format.

Freeware

http://www.mediahuman.com/audio-converter

[SiLæncer]

NotEnoughAV1Encodes is a GUI to make encoding faster and easier for AV1 encoders.

License: Open Source

Changelog

Added

    Added French Translation #113 by @manzing( 60d6e82 )
    Log FFmpeg Errors during splitting ( f0dd4bd )
    Log FFmpeg Errors during audio encoding ( 383ca73 )

Fixes

    Fix Chunks being added in the wrong order ( ddcb896 )
    Fix MKVMerge is wrongly used for MP4 output #111 ( 07bbb01 )
    Fix Log: Video Output Path incorrect ( 8640294 )

[close]

https://github.com/Alkl58/NotEnoughAV1Encodes/releases

[SiLæncer]

Whats new:>>

    Fix issue with clickable link that crash while clicked
    Fix issue when insert chapters on existing video with chapters file are not replacing the new one
    Properly reset media file before insert new one
    (Avoid undefinitely loading media file when replace existing media files)
    Properly set button that are should / shouldn't be disable or not

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

Shotcut is a free, open source, cross-platform video editor.

Changelog

    Added limited support for reading WebP Animation.
    Show audio-clips without album art as a checkboard for transparent instead of white.
    Added the GPS Graphic video filter (see its presets).
    Added the gopro2gpx utility to let you export a GPX file from a GoPro video using Properties > menu > Export GPX. This saves the .gpx in the same folder as the video file with the same name but different exension.
    Added Fisheye video filter (see its presets).
    Added snapping to the playhead to Keyframes.

    Added Help > Actions and Shortcuts:

    Provides a unified action search and shortcut editor.
    Replaces the old Keyboard Shortcuts... item in the Help menu and takes its keyboard shortcut ?.
    / is also a default shortcut, and either shortcut can be changed.
    Searches both action name and shortcut.
    Press Return/Enter within search to move focus to the list of actions.
    Press Return/Enter on a selected action to trigger it and close the dialog.
    Shift, Ctrl, or Alt + Return/Enter on a selected action to trigger it and NOT close the dialog.
    Double-click an action to trigger it but NOT close the dialog.
    The dialog is not modal so you can leave it open and to the side while working.
    Press Esc when the dialog has focus to close it.
    Press F2 when an action is selected to edit its first shortcut.
    Single-click a selected shortcut to enter edit mouse using the mouse. This means you typically need two single clicks: one to select, the second to enter into edit mode.
    You can Tab out of edit mode to navigate focus to the apply button and press Space to trigger the apply. It is intentional that you cannot assign Tab as a keyboard shortcut to an action.
    There are some keyboard buttons such as J/K/L that are reserved and cannot be used in a shortcut. You will see an error message when you try to apply it.
    You can define up to 2 shortcuts per action! You may want to leave the default as well as add your preferred shortcut.

    A big portion of the UI had to be rewritten to support this. As a result:

    All panel (hamburger) menus are consistently on the left/first.
    Panel-specific Options sub-menus were moved to Settings main menu.
    The keyboard shortcut to switch the player between Source and Project is now P.
    Various hidden or under-exposed actions now have a menu item somewhere including a new Player main menu.
    Many translations will be lost.
    The default shortcuts to change the current track now require Ctrl+Alt in addition to cursor up and down.

    Improved support for custom video transitions:

    There is a folder now in the App Data Directory named transitions where you can store these.
    All files in the transitions folder are listed in transition Properties, the Mask: From File video filter, and the Slideshow Generator dialog.
    Added a favorite button in transition Properties and Mask: From File that copies your chosen custom file to the transitions folder.
    Added a quick preview to transition properties.
    Added the ability to drag-scroll/pan using the middle mouse button (press mouse wheel) to Timeline, Keyframes, and the player when zoomed in.

    Improved the Filters picker:

    Added translatable keywords to facilitate search. For example, "transform" includes Size, Position & Rotate.
    Added the English filter name in an untranslatable manner to the keywords so people using a translation can more more easily find things based on proliferic English advice.
    Added support for a small animated icon.
    Added the alpha Operation, Reverse, and Invert parameters to the Mask: Draw video filter.
    Added Settings > Reset... to reset all settings including hidden ones.
    Fixed Move Track Up or Move Track Down breaks the order of blending/compositing.
    Fixed opening files with a % in their path or name.
    Fixed sometimes a date does not appear in Playlist.
    Fixed Old Film: Scratches video filter not working (broke in version 22.04).
    Fixed Stabilize video filter uses invalid analysis data after pasted.
    Fixed File > Open MLT XML as Clip... changes the current Video Mode.
    Fixed audio artifacts introduced after splitting a clip that has been converted or reversed using the better/large/DNxHR option.
    Fixed Text: Rich filter's toolbar may not reflect the current text color.
    Upgraded FFmpeg to v5.1.0
    Upgraded dav1d AV1 decoder v1.0
    Upgraded AOM AV1 encoder to v3.4.0
    Upgraded libvpx VP8/9 encoder to v1.12.0
    Upgraded VMAF to v2.3.1
    Upgraded Glaxnimate to v0.5.1

[close]

http://www.shotcut.org/

[SiLæncer]

Changelog

    Do not clear or reset chapter when chapter reset was clicked (Back to initial state instead)
    Do not show next or previous button when show spectrum
    Fixup white color issue while move is hovering into some of buttons
    Fixup chapter are not reset properly when 'Enable Chapter' are disable
    Fixup issue with remove chapter when chapter listview are not selected by user
    Fixup issue with UI freeze while load media, initialize frame or while encoding process
    Guard enable video options to check if GPU HW Accelerated config already set or not
    Introduce chapter time validity before input chapter on minute and seconds
    Introduce fullscreen layout and resizeable layout for main menu
    Introduce function to get video chapter directly from ffmpeg metadata and import it into chapter listview
    Introduce new algorithm for 'Add Chapter' to check if new chapter are the same or less than previous chapter for time duration if is exists
    Introduce new algorithm on 'Update Chapter' to check if new chapter are same, less or more than previous or next chapter in time duration
    Introduce progressbar widget from SyncFusion
    Implement new asynchronous method for getduration_summary, getpreview_summary
    Override arrow function key to control ImagePreview on picturebox
    Properly reset media file name text if was not loaded
    Properly show encoding text status instead only show "ENCODING and COMPLETED"
    Separate function to next and previous image into standalone function to avoid repeat call function
    Show GB (gigabyte) as file size when MB size is too high
    Switch to jpg from png as image extensions
    Reduce warning notifications while selecting snapshot or spectrum
    Re-work logic to get snapshot with asynchronous workload (reduce time to load snapshots)
    Re-work implementation of asynchronous method for start encode functions

[close]

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

Whats new:>>

    Fixup debug mode are not show log while enable in some cases
    Fixup encoding decision algorithm
    Introduce MP4 and AAC media file extensions

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

Changelog

   

    Disable panel drag drop feature while FFMPEG are not load properly
    Drop dependency for video and audio codec while value is empty (Default FFMPEG value will be used while empty)
    Do not restart application while enabling debug mode or frame mode
    Fixup AAC and MP3 value condition for codec configuration
    Fixup issue with chapter read and refresh algorithm
    Fixup issue with progressbar not work while encoding process
    Fixup issue with snapshot algorithm for audio file
    Introduce channel layout feature for audio codec
    Introduce feature to do action after encoding completed
    Introduce new button to change checkbox for save stream config per each stream
    Introduce slide animation for each main configuration on video / audio codec after grouping
    Introduce tooltip (Information tool) that will show minimal information about selected text from video codec configurations
    Introduce video scale or interpolation algorithm
    Misc fixes with audio decision algorithm
    Re-design layout interface

[close]

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

Perform conversions or edits and encodings for images, videos, audio files and much more, with the help of this comprehensive media manipulation suite that offers a myriad of useful features.

Donationware

Changelog

    Rebuilt 'Extract' function
    Added 'Image' section to output codecs
    Added '.avif' format to 'Image' function
    Added 'Preview' combobox to 'Edit media content' window
    Added 'Vu-meter' checkbox to 'Edit media content' window
    Added 'Set framerate mode' checkbox to 'Settings' window
    Added 'Set entropy coding to CAVLC' checkbox for 'H.264' function
    Ability to play an image sequence from 'Edit media content' window
    Corrected bug with 'Watch folder' and 'Edit media content' window
    Corrected bug with 'Display video's internal timecode' checkbox
    Corrected bug with 'Web video' function on Mac Apple silicon
    Corrected bug with 'Rewrap' function for the mxf format
    Corrected bugs with subtitles burning
    Various corrections
    Various improvements
    Updated ffmpeg, ffplay, ffprobe, yt-dlp

[close]

http://www.shutterencoder.com/en/

[SiLæncer]

Changelog

   

    Automatically rename file container if incompatibility found with file container and selected audio codec
    Automatically write video resolution into video profile after enable it
    Configure default value for WAV codec as PCM_S16LE while bit depth are not selected
    Configure muxing profile to enable while media are not loaded with some condition
    Detect .m2v file as supported media file
    Do not reset profile configuration while user are trying to switching codec
    Do not reset previous loaded media file name if user abort to load new media file
    Do not set minimum image resolution for image snapshots
    Fixup AAC encoding algorithm
    Fixup crash while load new media file continously after complete load first media file
    Fixup chapter add and read algorithm
    Fixup frame mode value that always empty
    Fixup issue with progressbar are not working while encoding audio file only or while enabling debug mode or frame skip from options menu
    Fixup issue with wrong value that was restored from config for max and overal video bitrate
    Introduce Color range, primary and space based from FFMPEG video filter (BT.709 & BT.2020) for video configuration
    Introduce MP2 and OPUS audio codec
    Lock all codec and menu configuration while media file are not loaded
    Reduce almost all unnecessary messagebox notification
    Remove duplicate variable call in other function
    Simplify all process by remove depend with lock profile while want to load, save media and enable some of codec configuration
    Simplify all file container check on all function
    Switch some of notification to using windows native notification UI
    Update some of codec information

[close]

https://github.com/Nicklas373/Hana-Media-Encoder

[SiLæncer]

FFmpeg Batch AV Converter is a free audio and video encoder, that allows to use the full potential of ffmpeg command line with a few mouse clicks in a convenient GUI with drag and drop, progress information. You can change encoding priority, pause and resume, set automatic shutdown. It is good for seasoned ffmpeg users as well as beginners.

License: Open Source

Changelog

• FFmpeg 5.1.1
• More than one application instance allowed (experimental).
• Minor bugfixes using Quick file listing setting.
• Minor bugfixes on Two Pass Video wizard.

[close]

https://sourceforge.net/projects/ffmpeg-batch/

[SiLæncer]

Changelog

    Added limited support for reading WebP Animation.
    Show audio-clips without album art as a checkboard for transparent instead of white.
    Added the GPS Graphic video filter (see its presets).
    Added the gopro2gpx utility to let you export a GPX file from a GoPro video using Properties > menu > Export GPX. This saves the .gpx in the same folder as the video file with the same name but different exension.
    Added Fisheye video filter (see its presets).
    Added snapping to the playhead to Keyframes.

    Added Help > Actions and Shortcuts:

    Provides a unified action search and shortcut editor.
    Replaces the old Keyboard Shortcuts... item in the Help menu and takes its keyboard shortcut ?.
    / is also a default shortcut, and either shortcut can be changed.
    Searches both action name and shortcut.
    Press Return/Enter within search to move focus to the list of actions.
    Press Return/Enter on a selected action to trigger it and close the dialog.
    Shift, Ctrl, or Alt + Return/Enter on a selected action to trigger it and NOT close the dialog.
    Double-click an action to trigger it but NOT close the dialog.
    The dialog is not modal so you can leave it open and to the side while working.
    Press Esc when the dialog has focus to close it.
    Press F2 when an action is selected to edit its first shortcut.
    Single-click a selected shortcut to enter edit mouse using the mouse. This means you typically need two single clicks: one to select, the second to enter into edit mode.
    You can Tab out of edit mode to navigate focus to the apply button and press Space to trigger the apply. It is intentional that you cannot assign Tab as a keyboard shortcut to an action.
    There are some keyboard buttons such as J/K/L that are reserved and cannot be used in a shortcut. You will see an error message when you try to apply it.
    You can define up to 2 shortcuts per action! You may want to leave the default as well as add your preferred shortcut.

    A big portion of the UI had to be rewritten to support this. As a result:

    All panel (hamburger) menus are consistently on the left/first.
    Panel-specific Options sub-menus were moved to Settings main menu.
    The keyboard shortcut to switch the player between Source and Project is now P.
    Various hidden or under-exposed actions now have a menu item somewhere including a new Player main menu.
    Many translations will be lost.
    The default shortcuts to change the current track now require Ctrl+Alt in addition to cursor up and down.

    Improved support for custom video transitions:

    There is a folder now in the App Data Directory named transitions where you can store these.
    All files in the transitions folder are listed in transition Properties, the Mask: From File video filter, and the Slideshow Generator dialog.
    Added a favorite button in transition Properties and Mask: From File that copies your chosen custom file to the transitions folder.
    Added a quick preview to transition properties.
    Added the ability to drag-scroll/pan using the middle mouse button (press mouse wheel) to Timeline, Keyframes, and the player when zoomed in.

    Improved the Filters picker:

    Added translatable keywords to facilitate search. For example, "transform" includes Size, Position & Rotate.
    Added the English filter name in an untranslatable manner to the keywords so people using a translation can more more easily find things based on proliferic English advice.
    Added support for a small animated icon.
    Added the alpha Operation, Reverse, and Invert parameters to the Mask: Draw video filter.
    Added Settings > Reset... to reset all settings including hidden ones.
    Fixed Move Track Up or Move Track Down breaks the order of blending/compositing.
    Fixed opening files with a % in their path or name.
    Fixed sometimes a date does not appear in Playlist.
    Fixed Old Film: Scratches video filter not working (broke in version 22.04).
    Fixed Stabilize video filter uses invalid analysis data after pasted.
    Fixed File > Open MLT XML as Clip... changes the current Video Mode.
    Fixed audio artifacts introduced after splitting a clip that has been converted or reversed using the better/large/DNxHR option.
    Fixed Text: Rich filter's toolbar may not reflect the current text color.
    Upgraded FFmpeg to v5.1.0
    Upgraded dav1d AV1 decoder v1.0
    Upgraded AOM AV1 encoder to v3.4.0
    Upgraded libvpx VP8/9 encoder to v1.12.0
    Upgraded VMAF to v2.3.1
    Upgraded Glaxnimate to v0.5.1

[close]

http://www.shotcut.org/

[SiLæncer]

Download your favorite videos and playlists from the web in your chosen fidelity, and convert existing media to a variety of formats and codecs.

Donationware

Whats new:>>

    Feature to download playlists from Youtube
    Bug fixes
    Feature and more minor improvements

https://github.com/onionware-github/OnionMedia