Anzeigen der neuesten Beiträge
0 Mitglieder und 4 Gäste betrachten dieses Thema.
Unter Direct X verbergen sich jetzt jeweils 2 getrennte Menues für Video und Audio, die auch jeweils für Video/Audio A & B getrennte Einstellmöglichkeiten bieten. Für was das gut sein soll?
* New: In Options -> DirectX you can configure two sets of different Videodecoders/Videorenderers (Video A/B) and Audiodecoders/Audiorenderers (Audio A/B). Switching between these settings can be done manually or automatically: 1) Manually: You find the commands in the main menu -> Settings or you can define keys in Options -> input for it. Switching between the sets does trigger a rebuild graph. 2) Automatically: In Options -> DirectX you find on the tab sheet "Video B" and "Audio B" edit boxes labeled "Auto B-Conditions". The following conditions (if you use more than one, separate them by a "," without the ") can be used here: File (file playback) Video (Playback with Video) H.264 (H.264 Video) MPEG2 (MPEG2 Video) DVBSource (DVBViewer Filter is used) A Slash / in front means "not" (Negation, example: /File = TV/Radio (not file)). The automatic switching to Set B happens, if all listed conditions are met, otherwise the DVBViewer uses Set A. If you define auto-conditions the manual switching is disabled. Some examples: o Using Vista you want for H.264 Video the EVR otherwise the Overlay Mixer to be used. In Video A you set the Overlay Mixer, in Video B you select EVR and as condition you set "H.264". o H.264-Playback with the DVBViewer Filter should use the Cyberlink Decoder (Video A), otherwise ffdshow (Video B ), this is useful for H.264 in MKV-file, which the DVBViewer Filter doesn't handle. The needed condition would be "H.264,/DVBSource". o Playback of video files should use ReClock Audiorenderer, for the rest (TV/Radio and audio only playback) Default DirectSound (Audio A). In Audio B you set ReClock as renderer and use the condition "Video,File".
Automatic Selection of a AC3-Audiotrack * New: Options -> General -> Prefer AC3-audio. If activated the DVBViewer does automatically select the AC3 audio track for file/DVD playback if available.
Version 4.0.1.0 Betaexpires 14.2.2009---------------------- * New: Complete rewriten DiSEqC 1.1 / 1.2 support (only for DVB-S devices allowing to send DiSEqC raw commands), which means, support for motorized dishes and cascaded DiSEqC elements (uncommitted switches, positioner behind a switch). All thanks to griga. * New: DiSEqC Editor ("DiSEqC expert mode"). Allows to assign user-defined DiSEqC command sequences to a satellite position - as you will see - much more conveniently than with the DiSEqC Editor of DVBViewer Pro 4.0.0.0 and earlier versions. * Removed: Positioner Console, please use transedit 3.27+ for this. it is much better suited. * Fix: The COM Interface gave a wrong value for the stereo audiomode. * Add: EPG-Parser: Added slv as language identifier. * Change: Removed check for driver supports color changes. * Fix: Grigas fix for problematic AC3 streams detection. * Add: Support for Pinnacle PCTV 380e/510e DVB-C hybrid. * Change: Brightness default is now set according to the used renderer. Should cure the Overlay too dark problems. Please reset the brightness value to default. * Fix: Problems with 120 dpi in some options windows. * Fix: OSD Media windows: Not existing network shares (UNC paths) do not cause any blocking anymore on first opening of the window. For this the support for the folder.jpg files has been removed for all UNC Path shares in the root view. * Fix: Media playback with a not in the DVBViewer predefined aspectratio cause a no update of the framerate in the #Datatags. * Change: Adding new virtual DVB device can be done in the hardware options window via the "+" button. The data now is saved to the network.xml instead of the usermode.ini. Existing data will be taken into account. * Update: Updated language files.DVBServer:---------- * Change: Adding new virtual DVB device can be done in the hardware options windows via the "+" button. The data now is saved to the network.xml instead of the usermode.ini. Existing data will be taken into account. * Add: Support for the new DiseqC handling.
Version 4.0.1.10 BETAexpires 12.03.2009 * Add: Tweaks: MinVolume in case you can hear something even if muted, lower this value. * Fix: Timers: minimal free disc space was not taken correctly into account if bigger than 2 GB. * Add: Hardware: Support for Turbosight clones. * Add: Hardware: Support for TerraTex XE MK II clones. * Fix: EVR: A Black box stays on the screen fixed. * Fix: TT diseqC fix from Griga. * Add: Support for Closed Captions of dish network. * Fix: Premiere EPG: The EPG could fill up the whole memory if the channel premiere direct was tuned for a long time. * Add: Options: Service Options dialog. IMPORTANT: This page is still under heavy development! * Add: Support for several Recording Service functions / communication. o Download EPG from service. You can tell the viewer how many days of EPG you want to download. Notice: this doesn't create magically 14 days of EPG. You only get as much data as the service has gathered. o Send EPG programmed timers to service: If you select this option all timers you program via EPG in the EPG Window or OSD are send directly to the service. There is ATM no feedback and you can't edit or see the timers in the DVBViewer directly. You can also create manual timers in the recorder window which are send to the service. o Connect to recordings list. This one is quite tricky and you need knowledge about the management of network shares and user rights under windows to make this work. And you have to setup this function in the Service according to it's readme_svc. Don't use this function with a local DVBViewer only with remote clients! Background: A real streaming of recordings from the service would clash with the playback functions of the viewer. A major rewrite would be needed, which is too much ATM. So for now I choose the easy way and use network shares to realize the streaming in a local network. For this the recordings database of the service needs to be setup in a way that it uses UNC paths to the recording folders instead of local paths. For this and for the client access the access rights have to be configured correctly, which can be a little complicated and done wrong could result in no recordings can be done by the service.
Version 4.0.1.20 BETAexpires 22.03.2009 * Fix: DVB-Subtitles: fixed wrongly shown pixels. * Fix: Recordings in MPEG Format with APID =0 and VPID = 0 are now changed to the TS format and the PIDs are dynamically added from the PMT. * Add: Recordings list from the service: recordings now can be deleted. Remember this does also delete the real file not only the database entry (same behavior like in the web interface). * Fix: Tune only timers (EPG Window → prebook) are not send to the service anymore. * Add: If the DVBViewer is running after Standby or Hibernate, it refreshes it's EPG from the service. * Add: Service timer lists can be shown and edited. You can enable this in options → service options. Only Recording timers are listed because the DVBViewer doesn't know the other timer types. Not every function of the DVBViewer recorder window is supported. Recording folders, no file write and Transponder dump from the edit window do not work. Unknown timer actions or end actions are mapped not accepted and mapped to the default value of the service. Notice: Instant timers are handled by the DVBViewer not by the Recording service.
Version 4.0.1.25 BETAexpires 28.03.2009 * Fix: - Hybrid tuner handling: Fixed some issues. * Fix: Recorder window: fixed a typo introduced in the last version, which caused the window being placed at the top of the screen. * Add: Extended the controlling of the Recording service (V. 1.4.7.65+). o New menu in the OSD: OSD main menu → system → Rec service - with the following options: + Standby, Hibernate, Shutdown (PC): Triggers the according action in the recording service. The service does give a 30 seconds warning. In this time window all the DVBViewer clients show a dialog window, where the user can stop the action. + Load EPG: gets the EPG from the service. + Wake On LAN: Wakes the recording service PC (even from Soft-Off). The PC must be configured to accept WOL. Important: The DVBViewer needs to have at least once contact with the service PC to get it's MAC address. These functions are also accessible via actions (see actions.ini).
Autor
Thema: DVB Viewer Pro ...... (Gelesen 165105 mal)
