Autor Thema: Editoren diverses ...  (Gelesen 1888367 mal)

0 Mitglieder und 142 Gäste betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
ImHex 1.16.0
« Antwort #6240 am: 01 März, 2022, 19:40 »
An open-source editor that allows you to manipulate hexadecimal, binary data for writing optimal and well-performing apps, by displaying you content byte by byte.

Donationware

Changelog

    Addition:

    Added basic editing support to the data inspector
    Simply double click the type you want to edit and then enter your new value there
    Not all types can currently be edited but the majority of it can
    Added custom font and font size setting
    Added long doubles to the data inspector
    Added setting where the user can add additional search paths which will be considered throughout ImHex. Thanks a lot to @PredatorCZ
    Added help text to data processor to tell the user how to start using it

    Pattern Language:

    Massive refactor of the pattern language
    The entire pattern language now switched to using smart pointers instead of doing manual memory management. This should prevent the majority of memory leaks that were present before.
    Allow all variable attributes to be applied to types directly so all their instances will have those attributes applied
    Added #pragma bitfield_order which applies the [[left_to_right]] or [[right_to_left]] attribute to all bitfields by default
    Added [[single_color]] attribute which forces all children of a pattern to have the same color. Thanks to @PredatorCZ
    Fixed a crash with using #include. Thanks to @Diadlo
    Arrays and custom types are now properly getting treated as references so they can be passed to functions without getting weird behaviour
    Added std::mem::find_sequence_in_range. Thanks a lot to @PredatorCZ
    This function works the same as std::mem::find_sequence but takes two additional parameters to specify the start and end address of the search performed
    Fixed off-by-one error when calculating unsized array sizes. Thanks to @Dyddye

    Improvements:

    Automatically disable borderless window mode then an Intel HD GPU is being detected.
    This prevents the black boarder / offset rendering from appearing which is caused by a bug in the Intel OpenGL driver
    This detection can be overwritten by manually setting the hex.builtin.setting.interface.force_borderless_window_mode setting to 1 in your settings.json
    Disable buffering on log files so their full content is always being written to disk
    Improved error handling of the content store
    The content store now only tries to list files in folders that are actually writable
    ImHex will no longer try to download (and fail) to download files into folders without permissions
    Increased store load timeout to 30 seconds
    This should allow you to use the content store even if you're behind tons of proxies
    Improved ImHex restarting user experience
    Instead of just immediately closing ImHex when a setting was changed that needed a restart, ImHex now correctly prompts if you want to restart it.
    Content from the ImHex-Patterns repository is now getting shipped by default

    Bug Fixes:

    Fixed opening files with unicode characters in their path
    Fixed ImHex not loading plugins correctly on first launch
    Fixed undo points not being created correctly
    Fixed pasting bytes into ImHex in certain cases
    Fixed log files being formatted incorrectly
    Fixed a crash when scrolling through the hex editor too quickly
    Fixed a bug where editing a byte and then scrolling down would cause all content of the hex editor view to disappear
    Fixed banner and logo images being corrupted in certain cases. Thanks a lot to @PredatorCZ
    Fixed circular dependency when building ImHex which caused issues on certain Linux distros
    Fixed imgui.ini file sometimes being created in the current working directory
    Fixed crash when trying to read from an empty file
    Fixed crash when saving projects

[close]

https://github.com/WerWolv/ImHex

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
ImHex 1.16.1
« Antwort #6241 am: 02 März, 2022, 06:10 »
Changelog
   

    AdditionAdded alpha preview to the color picker tool:

    Improvements:

    Improved display of the base address setter popup
    Make std::mem::find_sequence_in_range return -1 when the value couldn't be found

    Bug Fixes:

    Fixed bug where the current offset in the pattern runtime was getting messed up when calling a function
    Fixed a crash when entering too much text in various input text boxes
    Fixed a crash when searching for empty strings or bytes

[close]

https://github.com/WerWolv/ImHex

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
Network Notepad 6.0.20
« Antwort #6242 am: 02 März, 2022, 17:50 »
Network Notepad is a specially designed application for creating interactive network diagrams.

Now you can use this accessible and easy-to-use instrument to create or manage the diagrams you need.

Point-and-Click Telnet/ Browse/ User-definable
Network Management.
Simple Drag and Drop interface.
Open, Text Based File Format.
Printing.
Linked Diagrams.
Flow Charts.

Freeware

Whats new:>>

Bugfix: Auto-grouping rack with a rack mounted device resulted in "Error: This edition does not support grouping" when loading .ndg file.

http://www.networknotepad.com/index.htm

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
RJ TextEd 15.44
« Antwort #6243 am: 02 März, 2022, 19:40 »
RJ TextEd - A Unicode source and text editor. RJ TextEd is a full featured text and source editor with Unicode support, syntax highlighting and code folding. The functionality extends beyond text files and includes support for HTML editing with integrated preview, spell checking, auto completion, HTML validation, templates and more. The program also include support for Topstyle Lite CSS editor, has a dual pane file commander, as well as a FTP client to upload your files. The editor uses language files to display menus and dialogs in different languages. There are several included languages. New language files can easily be created in the editor. RJ TextEd is also a simple web development tool. The editor can use auto completion and hints to assist you in editing your source code. You can preview HTML/ASP/PHP... code using one of the preview tabs or open a document in a browser. The editor does not only handle source code. It also handles true ASCII files, binary files and of course plain text files.

License: Freeware

Changelog

    Toolbar images:

    Updated the image lists to the latest version.

    Fixed:

    Context menu issue when installing the application.
    Possible directory issue when opening a file with no path.

[close]

http://www.rj-texted.se/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
CudaText 1.157.0.2
« Antwort #6244 am: 03 März, 2022, 12:20 »
Create programming scripts with this powerful tool that supports more than 130 languages and allows users to work concurrently on as many as six groups of projects.

Freeware

Changelog
   

+ add: support encoding ISO-8859-9 (thanks @ertank)
+ add: command 'tabulation-key uses spaces: turn on'
+ add: command 'tabulation-key uses spaces: turn off'
+ add: command 'tabulation size: set to 2'
+ add: command 'tabulation size: set to 4'
+ add: command 'tabulation size: set to 8'
* change: prettified ISO encoding names: 'iso88591' -> 'iso-8859-1' etc
* change/add: better Undo steps, when Del/BkSpace key was pressed many times (thanks @cser)
* change: plugin Insert Time: move caret to the right side on insertion (thanks @mix-7)
* change: delete deprecated (in 2021/10) commands 'stop macro' and 'cancel macro'
* change: delete deprecated (in 2019) reading name of ui/syntax themes from history file, it's read from user.json

[close]

https://cudatext.github.io/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
QOwnNotes 22.3.0
« Antwort #6245 am: 03 März, 2022, 21:02 »
QOwnNotes is a text editor / notepad replacement with markdown support and todo list manager. The program supports themes, keyboard shortcuts, syntax highlighting, and encryption. Includes available nested file list, tags, search, and more. Optionally works with the notes application ownCloud or Nextcloud.

Cross-platform with clients available for Mac and Linux.

License: GPL

Changelog
   

    an issue with redrawing the preview when the preview panel is turned on manually without switching workspaces was fixed (for #2482, thank you, @Waqar144)
    text blocks are now re-highlighted when text is added to the dictionary (for #2480, thank you, @Waqar144)
    added more German, Arabic, French translation (thank you rakekniven, noureddin, chocolatine)

[close]

https://www.qownnotes.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
ImHex 1.16.2
« Antwort #6246 am: 03 März, 2022, 21:20 »
Changelog
   

    Improvements:

    Yara rules are no longer bundled with ImHex directly anymore; Having them bundled made a bunch of different anti virus tools very sad so they once again need to be downloaded manually from the content store
    Patterns that use types which have been defined through a using statement now properly display their new type name in the pattern data view

    Bug Fixes:

    Fixed searching not working at all
    Fixed many text boxes not being writable at all

    Pattern Language:

    Fixed crash when using control flow statements without a value
    Fixed control flow statements not working correctly inside of custom types
    Fixed crash when using attributes
    Fixed major memory leak when using the [[format]] attribute
    Fixed crash when passing a value as a auto parameter to a function

[close]

https://github.com/WerWolv/ImHex

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
Vim 8.2.4501
« Antwort #6247 am: 04 März, 2022, 07:15 »
A highly configurable text editor built to enable efficient text editing - an improved version of the vi editor distributed with most UNIX systems.

Freeware

Changelog
   

    8.2.4501: with 'showbreak' set cursor displayed in wrong position
    8.2.4500: Vim9: can declare a global variable on the command line
    8.2.4499: Vim9: at the script level declarations leak to next block
    8.2.4498: using <Plug> with "noremap" does not work
    8.2.4497: wrong color for half of wide character next to pum scrollbar
    8.2.4496: Coverity gives warnings after tags code refactoring
    8.2.4495: help test fails in 24 line terminal
    8.2.4494: the find_tags() function is much too long
    8.2.4493: options test fails in the GUI
    8.2.4492: no error if an option is given a value with ":let &opt = val"
    8.2.4491: MS-Windows makefile dependencies are outdated
    8.2.4490: terminal focus reporting only works for xterm-like terminals
    8.2.4489: failing test for comparing v:null with number
    8.2.4488: build error with +eval but without +channel or +job
    8.2.4487: Vim9: cannot compare with v:null
    8.2.4486: MS-Windows GUI: slow scrolling with maximized window

[close]

http://www.vim.org/index.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
PilotEdit Lite 16.2.0
« Antwort #6248 am: 04 März, 2022, 19:20 »
PilotEdit is a text, hex, XML, C/C++, HTML, PHP, Java, Javascript and Perl editor that can edit large files of 400GB (40 billion lines).

It offers customizable syntax and keyword highlighting, advanced search and replace operations, automatic text encoding, 256-bit AES encryption/decryption and a built-in FTP/SFTP client lets you open, edit, download and upload large files directly to/from a FTP/SFTP server.

In addition to standard text editing features, PilotEdit can compare and merge two large files of 100GB (10 billion lines). You can also sort, find/remove duplicate lines and extract strings over a large file of 1GB.

Freeware

Whats new:>>

Includes improvements over function window.

http://www.pilotedit.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
QOwnNotes 22.3.1
« Antwort #6249 am: 04 März, 2022, 22:00 »
Whats new:>>

    disabling of spellchecking if the current note is encrypted now also works after the settings dialog was opened (for #2487)
    more dark icons for menu entries were created (for #2489)
    added more translation (thank you hansa2662, chocolatine, noureddin, amirkbrpr, mguerra)

https://www.qownnotes.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
Zettlr 2.2.4
« Antwort #6250 am: 05 März, 2022, 22:00 »
Write text and conveniently edit it using Markdown with the help of this user-friendly and well-thought-out, Electron based application.

MIT License

Release Notes

This update changes the scroll effect on the document tab bar to be smooth
instead of snappy. To revert to the old behavior, you can use the following Custom CSS:

body div#tab-container {
  scroll-behavior: auto;
}

GUI and Functionality

    New Feature: You can now switch between zooming the whole GUI or just the
    editor font size when using the zoom menu items/shortcuts
    Restores the display of links in the related files section of the sidebar
    Differentiate between inbound, outbound, and bidirectional links in the
    related files section
    Fix related files display and link reporting
    Added a smooth scrolling effect for the tab bar
    Added classes in order to conditionally style the related files section based
    on the type of relation, the classes are tags if the relation is based on
    keywords, inbound for incoming links, outbound for outgoing links, and
    bidirectional for links from and to the said file
    Clicking on math now places the cursor correctly, reducing friction
    Select the image markup when clearing a rendered image by clicking on it
    Image captions do not disappear anymore while you are editing it, even if you
    move the mouse out of the image area
    Improve icon alignment in the related files section
    Relaxed conditions for emphasis rendering by just excluding word-characters
    Tab characters are no longer detected as spelling errors
    You can now choose to indent using tab characters instead of spaces
    Do not close the file left to a new usaved file upon saving the file
    Fixed a weird race condition in which the file manager would remain ignorant
    of an in-memory file after it has been saved to disk
    Changes to your files should now be detected immediately also on macOS
    Fixed a bug that would disable both types of magic quotes (single + double)
    if you disabled only one type
    Improve styling of progress bars on all platforms

Under the Hood

    Resolve links on-demand in the link provider
    Factor out the clickAndClear functionality to its own helper
    Improve editor image CSS
    Factor out the checks to see if we can render some element to unify behavior
    across rendering plugins
    Update most pure Node scripts from CommonJS to ESM in order to support the new
    versions of csso, chalk, and got
    FINALLY managed to get fsevents to run! After about three years or so.
    Add support for JabRef fileDirectory-style comments

[close]

Download: https://github.com/Zettlr/Zettlr/releases

https://www.zettlr.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
Text Editor Pro 20.1.0
« Antwort #6251 am: 07 März, 2022, 11:00 »
Text Editor Pro (formerly EditBone) is a powerful text editing tool that comes with syntax highlighting support for over 50 languages and scripts, customizable with over 100 options, 29 ready made styles, a handy file comparison feature, unicode character map, numerical unit convert tool, SQL formatter, and support for multiple directories and search results.

Freeware

Changelog

    Added add HTML code to clipboard option for editor (default false)
    Added popup menu for status bar
    Added selection for multi caret
    Fixed -noskin issues
    Fixed bookmark list
    Fixed file opening
    Fixed language files
    Fixed multi caret
    Fixed option defaults
    Fixed reload changed files
    Fixed text editor control
    Refactored HTML export

[close]

https://texteditor.pro/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
Vim 8.2.4522
« Antwort #6252 am: 07 März, 2022, 11:20 »
Whats new:>>

GUI test fails with Motif.

http://www.vim.org/index.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
ProgramEdit 5.1
« Antwort #6253 am: 07 März, 2022, 17:35 »
ProgramEdit - a free Windows® software source-code editor. ProgramEdit includes language support for HTML, Ada, C/C++, C#, CSS, JAVA, JavaScript, Perl, PHP, Python, Ruby, VB, VBScript, Verilog, VHDL and Batch(.bat) files. Other features include tabbed file selection, text highlighting, find & replace, regular expressions, sesssions, bookmarks, multiple undo/redo and hyperlinks.

Freeware

Whats new:>>

    add View/Word Wrap Auto
    fix several minor bugs
    update Word-Wrap Help

http://simplesolverlogic.com/index.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 191383
  • Ohne Input kein Output
    • DVB-Cube
SPFLite 2.5.22066
« Antwort #6254 am: 07 März, 2022, 19:40 »
Rename, clone, delete, edit, print, exclude, touch, add to favorites and view your files using this intuitive software application.

License: GPLv3

Changelog

    Alter the check for embedded NULL (X'00') characters in a file so that it is performed after Unicode conversion to avoid false warnings.
    Correct DIFF command handling of tab number operands when there are some ineligible tabs (like Clip sessions) open.
    Correct case handling for AUTOCAPS and AUTOCASE during colorization. They were broken by a bug fix in the previous release.
    Correct macro function SPF_INVCHARS to honor the Invalid character choice of "N" for no replacement.
    Correct handling of the SET PENDING.macname=Y support, which allows a macro to continue executing even when there is a "Pendling Line Command" state.
    Correct handling of a line range with the SPLIT command.
    Correct PROF display immediately after file load. It was not properly removing any prior PROF display lines.
    When warning errors are detected in an AUTO (Colorize) file, the name of the exact colorize file will be included in the message. This will remove confusion when the file Profile invokes the USING option.
    Improve the Status Bar display which shows the Profile in use to identify when a USING(profname) is in effect.
    Normalize (sort, remove Dups) the list of file extensions in the Options => FM tab display to ease editing the list.
    Alter logic for how/when commands are saved in the RETRIEVE stack. It was not handling PFK initiated RFIND/RLOCFIND triggers of command line FIND / CHANGE commands properly.
    Add additional validation to internal pointers in the Tab removal process.
    Adjust LOCATE message generation to prevent multiple messages being issued for what is a single error.
    Correct handling of an empty =WORD> string to properly reset the WORD value to its default.
    Correct colorizing of the Status Line Mode box, it was not properly highlighting certain modes (Browse, View, etc.)

[close]

http://www.spflite.com/Home.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )