DVB-Cube <<< Das deutsche PC und DVB-Forum >>>
Diverse DVB Software für verschiedene Karten => # Sonstige Software => Thema gestartet von: SiLæncer am 27 April, 2005, 22:03
-
Für TT-PCline budget/premium/usb, Wintv Nexus/Nova, SkyStar1,B2C2/SkyStar2/Sky2PC/Cable4PC/Air2PC, TT-Micro Plus/Hauppauge DEC, Twinhan VisionPlus DTV, Pinnacle PCTV Sat
(Windows 2000/XP only).
(http://www.dvbstreamexplorer.dk/images/sisection_s.png)
Gibts hier : http://www.dvbstreamexplorer.dk/download.php
-
Neu :
* Added save A/V pes streams option
* Added save A/V es streams option
* FIX: On a fresh installation, in LNB/DisEqC settings dialog it would not save selected settings until you closed the application and started it again.
* Added new Twinhan driver for blue boards using THSource.ax from SDK V2.2.
* Added generic BDA driver. It has only been tested with Nova-S card with BDA drivers installed.
* FIX: scanning current NIT was not possible for DVB-C and DVB-T cards because no satellite was selected and satellite selection does not apply for these network types.
-
* Added raw memory dump of descriptors in pidscanner.
* Extended TS File driver, so at least some plugin-ins (i.e. DSMCC and streaming to disk) can be used with a TS file as input.
* Applied a work around to prevent a crash on a certain ARD MHP stream. This is just a temporary fix until the problem is fully understood.
* Removed frequency validation in tuning for TTPremium, TTBudget, TTUSB and TTMicro DVB-T devices. This is to allow for VHF freqeuncies to be tuned.
http://www.dvbstreamexplorer.dk
-
* PIDSCAN: Added parsing of sequence_header and seqeunce_extension of video streams. This will give information such as height, width, chroma format, bit rate , frame rate etc.
* PIDSCAN: Added parsing of 11172-3 audio header. This will give information such as MPEG layer, bit rate, sample frequncy etc.
* PIDSCAN: Added identification of AIT streams, and streams carrying MHP application Object Carousel data.
* FIX: bug in AIT parser. protocol_id field in transport protocol descriptor always indicated IP transport, even for cases where OC was used as transport.
Quelle : www.dvbstreamexplorer.dk
-
PIDSCAN: Some features are now available in free version for trial. Note that PIDSCAN only works with full TS capture capable devices.
-
* Enabled one minute AVI/WMV/PVA recording for trial purposes in free version.
* Enabled one minute VidelLan (VLC) streaming for trial purposes in free version.
-
* FIX: buffer over-run bug in TS processing filter.
* FIX: Several bugs in BDA support. And now it should no longer be necessary to apply TuningSpace.reg registry patch.
* FIX: you will no longer get an error when installing DVBSE and Windows Media Encoder is not installed (could not find WMVCore.dll error). However you will not be able to use Record Service (WMV) until you install Windows Media Encoder. Windows Media Encoder can be downloaded from Microsoft.
http://www.dvbstreamexplorer.dk/
-
* FIX: "Failed to create plugin instance: 80040154" problem. The custom PID chart control was not being registered correctly when pidscan.dll was loaded.
http://www.dvbstreamexplorer.dk
-
* TT-Budget driver compiled with latest SDK from TechnoTrend(v2.19). Verified, working with Nova-S PCI.
* TT-USB driver compiled with latest SDK from TechnoTrend(v2.19). Not verified, I don't have hardware for testing.
* Added new TTUSB2 driver (BETA) compiled with latest USB2 SDK from TechnoTrend(v2.19). I assume that this is for the new TT-Connect USB boxes, but this is not yet confirmed. Not verified, I don't have hardware for testing.
* TT SDK version number is now incluced in driver list for all TT devices except TT-Micro.
* Included b2c2_2 BETA driver in build. This should enable features in DVBSE that require full TS capture. Not verified, I don't have hardware for testing.
* Satellite name is now also exported for each service when using "Save Services..." menu.
-
* FIX: bug in parsing of TeleText descriptor.
* FIX: Bug in Twinhan DiSEqC code setting tuner during SI scan.
* Added two registry files (LoggingOn.reg, LoggingOff.reg) to allow quick switching on and off of logging.
* Added export/import of transponder list in satellite list mgr.
* "Remove 'dead' secondary transponders" option in satellite list mgr transponder cleanup changed to "Remove 'dead' transponders"
* FIX: some bugs in satellite list mgr transponder cleanup.
* Creating "My DVBStreamExplorer Files" folder in "My Documents" folder of current users and in "Shared Documents" folder.
* Major changes in LNB/DiSEqC for all TechnoTrend based devices. Configuration from previous build will be broken. You will need to re-apply your LNB/DiSEqC after installing this build. You will need to select the satellite positions you want to scan from the global satellite list (satellite list mgr). For each of the selected satellite positions you will need to configure a DiSEqC option. DiSEqC option can no longer be set in tuning dialog. DiSEqC option is implicitly set by DiSEqC option configured for selected satellite.
* Added support for DiSEqC 1.2 motor control for all TechnoTrend based devices.
* To utilize DiSEqC 1.2 motor control you must configure orbital position of each satellite position controlled by motor in satellite list mgr. Follow the instructions in transponder list dialog. To open transponder list dialog, double-click on a satellite entry in satellite list mgr.
* To utilize DiSEqC 1.2 motor control you must configure the speed of your motor on LNB/DiSEqC settings tab in device Configuration dialog. You must also configure DiSEqC 1.2 option for each of the satellites in the list which are motor controlled. You must also configure DiSEqC position. Note that this is the memory position in positioner/motor and not the orbital position of satellite. Follow the instructions on dialog.
* When moving dish DVBSE will use a calculated delay before setting tuner to give the motor time to move to new location. This delay is calculated from configured motor speed, and the difference in orbital positions configured for the positions being moved from and to. On the first motor move after DVBSE has been launched the position moving from is not known, thus it will calculate a worst-case delay of position difference of 160 degrees.
* NOTE: TechnoTrend officially only supports DiSEqC 1.0. Connecting a motor to your TechnoTrend/OEM device and any damage this might cause is on your own responsibility.
* DiSEqC 1.2 support in DVBSE had been successfully tested with a Hauppauge Nexus-s card connected to a SG2100 motor.
www.dvbstreamexplorer.dk
-
* All TechnoTrend drivers, except TTMICRO, are now compiled with MSVC 7.1.
* FIX (BDA): A problem with AVerMedia DVB-T device where Tuner and Capture devices are implemented in the same DirectShow filter. This caused DVBSE to crash since it was expecting these devices to be implemented in separate filters.
* Added some information properties for ALL NETWORK, network and transponders nodes in SI tree view. Properties are shown in values pane.
* Various signal properties (signal level, signal quality, singal BER and signal SNR) are now collected during scan for all TechnoTrend based devices except TTMICRO. These properties are shown on transponder node, and they are saved to/loaded from XML file.
* Time stamp of when transponder was scanned is now collected. This property is shown on transponder node, and is saved to/loaded from XML file.
* BDA: generel fixes. Signal lock is now properly detected. It is now confirmed to be working with Hauppauge Nova-t 90002 by author. It has been reported to be working with Terratec Cinergy T2 USB2 by user.
* Fixed parsing bug in Terrestrial delivery system descriptor.
* Added export of service information to CSV file (flat list). Currently only available for DVB-S.
www.dvbstreamexplorer.dk
-
* FIX: database export did not work if you typed the file name directly instead of using browse button in export dialog box.
* FIX: sat list mgr transponder import did not work if there was 0 or 1 transponder already defined in the satellite. In that case only one entry from CSV file would be imported.
* NEW: Export of service information to JET(MDB) and MSDE/MSSQL. There are two types of export: (1) flat (simple), just one table for service information. Not all properties are preserved, i.e only one audio pid is exported (subject to preferred language). Table is suitable for viewing in MS Access where filtering and sorting can be applied. (2) relational (complex). Information is exported to multiple tables. All stream and CA information is preserved. This is in a format similar to the format used internally by service viewer. Not suitable to be viewed in MS Access due the many tables and relations involved. Instead is recommed that you make your own applications that queries the exported database for information. Only Windows integrated authentication is supported in this version. The user name and password that can be specified is currently ignored.
* NEW: added option to set preferred language for elementary streams. I.e. this will be used to determine i.e. the default audio PID for service oriented plug-ins like service player. Also added option to set prefereed CA for servcices, though this is probably not as useful as the language option.
* Only one instance of DVBSE will be allowed to run. You will receive an error if you try to start a second instance. Many of the device API's supported by DVBSE only allow one application to control the hardware resources. And in some cases starting a second application seems to cause crashes. Thus it makes sense to only allow one instance running at the time.
* TTPREMIUM driver is now compiled with SDK 2.19. Now DVBSE should work with Hauppauge Nexus-s 2.3 cards.
* FIX: DISEQC 1.2 GOTO POSITION command was sent even if motor was already in correct postion. This could cause strange errors like spurious movement of motor.
* CHANGE: SI scanning functions 'Single satellite' and 'All configured satellites' has been replaced by one function 'Scan satellites'. Here you can select exactly which satellites to be scanned, included just one satellite or all of them.
* Free version will now allow one transponder to be saved and loaded for trial purposes.
www.dvbstreamexplorer.dk
-
* When clicking on transponder entry in satellite list manager, the transponder parameters will now be shown.
* FIX: CSV exported teletext/subtitle page values were incorrect.
* Added button in SI scanning dailog to select all satellites.
* FIX: DiSEqC settings were lost for TechnoTrend based devices, if DVBSE failed to initilalize driver during startup. I.e. this could happen if a USB device was not connected during startup.
* FIX: buffer overrun when handling service name. This caused a crash when pressing 'close' in SI scanning dialog after scanning 11617V on 7E. This transponder had a service with an unusual long name.
* Added more information about tuning (frequency, success and failure) in satellite list manager NIT update/cleanup and SI scanning.
* B2C2/B2C2_2: FEC was not set in tuner dialog when a transponder was selected from the list.
* B2C2/B2C2_2: minor fixes. These drivers should be more stable now.
* B2C2/B2C2_2: changed LNB/DiSEqC configuration. You will need to re-configure settings after installing this build. You will need to add the satellites you use (selected from global list of satellites) and for each of then configure DiSEqC option.
www.dvbstreamexplorer.dk
-
* TTUSB: added option to apply limits (min, max) on symbol rates accepted during SI scan.
* FIX: if service or provider name contains '"' characters these will now be escaped with an extra '"' character when exporting to CSV file.
* FIX: during SI satellilte scan with 'Read NIT tables from primary transponders' option enbled it was possible for a transponder to be scanned more than once if it was referenced from multiple NIT tables. Now transponders that have already been scanned will be skipped. This will help reducing the scan time of satellites.
* B2C2_2: Fixed a serious problem that TS filter was not released after first usage. This meant that any scan operation would only work once. You would see the problem on SI scan of multiple transponders, where you would get almost or no data after scanning the first transponder. B2C2_2 is now quite stable when SI scanning multiple transponders. The full TS capture functions (pidscanner and save entire TS to file) are also working now.
http://www.dvbstreamexplorer.dk/
-
* DSCMCC: Private bytes length were always shown as zero in DownloadServerInitiate section. Added hex dump of raw private bytes data.
* TT All devices: active transponder will no longer be saved on application exit and re-applied on next application launch. You will now have to explicitly tune every time application i launched.
* TT All DVB-S devices: LNB power will now be turned off on application exit.
* TT BUDGET/USB/USB2: now compiled with TT SDK 2.19a
* TT ALL: added small delay (up to 2 seconds) when tuning waiting for signal to lock.
* BDA: minor fixes
* NEW: added MUX list manager for DVB-C and DVB-T. This is similar to the Satellite list manager that already exists for DVB-S. Here you can maintain a list of the MUX'es available in your area. Added option to SI scan multiple DVB-T and DVB-C muxes selected from the MUX list. MUX'es can be manually added to list or added automatically by scanning full band.
* FIX: DVB-T/C frequencies were exported to database using incorrect units.
www.dvbstreamexplorer.dk
-
* FIX: carousel_id descriptors with unknown format id were not displayed.
* FIX: BAT not parsed and displayed correctly when scanning SI.
* FIX: Pidscanner was broken in build 49. SI sections were not shown at all.
http://www.dvbstreamexplorer.dk/
-
* TT-Budget, TT-USB and TT-USB2 drivers are now compiled with TT SDK 2.19e. This should add support for TT-budget S-1401.
* FIX: If one or more 'Multilingual network name descriptors' were found during SI scan DVBSE would hang or crash when pressing close button in SI scan dialog.
* NEW: added UDP multicast driver. This allows for a TS UDP multicasted network stream to be scanned by DVBSE.
* NEW: added UPD multicast network streaming function (found under plugins -> network streaming menu).
http://www.dvbstreamexplorer.dk/
-
* PIDSCAN: fixed crash in case there were SDT sections for multiple transport streams (sdt - other_transport_stream, table id 0x46).
* PIDSCAN: reorganized display of NIT and SDT sections.
* PIDSCAN: added BAT section parsing.
* Fixed kernel event/thread handles leak.
* FIX: if you i.e. by mistake selected an incorrect network type for BDA, DVBSE would always crash during startup and you would never get a chance to correct this. Now you will be prompted to select driver and in case of BDA driver also filters and network type after a crash. You will also prompted for these parameters the first time you start DVBSE if upgrading from a previous build.
http://www.dvbstreamexplorer.dk/
-
* PIDSCAN: fixed several stability related issues.
* PIDSCAN: restructured SI tree layout.
* PIDSCAN: ES stream type 4 (ISO13818-3 AUDIO) was not parsed at all.
* Service player: added option to select DirectShow render to be used when playing service. You can choose between default render, VMR-7 and VMR-9. VMR-7 and VMR-9 might not work on your system depending on OS (Windows 2000/XP) and graphics adapter/driver installed.
http://www.dvbstreamexplorer.dk/
-
Release Notes gibts hier : http://www.dvbstreamexplorer.dk/doc/dvbse3/readme.html
http://www.dvbstreamexplorer.dk/
-
* DSCMM: fixed some issues in parser regarding IOP::IOR() object reference resolving.
* DSCMM: added parsing of ServiceGatewayInfo in DownloadServerInitiate.
* FIX: OC/IP node under TRANSPORT_PROTOCOL_DESCRIPTORS (AIT) was not placed correctly.
http://www.dvbstreamexplorer.dk/
-
* FIX BDA: Scan current transponder/current NIT was not possible for DVB-S devices.
* FIX BDA: Incorrect values were used for DVB-T bandwidth property.
* FIX BDA: DVB-C/T settings were not loaded correctly.
http://www.dvbstreamexplorer.dk/
-
* FIX BDA: if BDA device failed to initilize due to incorrect device settings or USB device not connected, you will now be prompted for capture and tuner filter on next application launch.
* MAC scanner has been renamed to MPE scanner.
* MPE scanner: added support for multiple PID scanning.
* MPE scanner: added logging of IPV4, IPV6, TCP and UDP destination endpoints.
http://www.dvbstreamexplorer.dk/
-
Ich habe eine kurze Frage (und die Suche hat mir nicht geholfen :( ).
Ich hoffe, ich verärgere Silencer nicht, weil das an anderer Stelle schon ausführlich besprochen wurde.
Wofür ist der dvbstreamexplorer gut? Hab auf der Seite gelesen (bin des Englischen nicht allzu mächtig), dass man damit den Transport Stream genauer untersuchen kann, aber wozu?
Also, was kann ich mit dem Programm genau anfangen? ???
Danke schon im Voraus und sorry, falls ihr jetzt die Hände zusammenschlagt und sagt das weiss doch jeder!
-
Wofür ist der dvbstreamexplorer gut? Hab auf der Seite gelesen (bin des Englischen nicht allzu mächtig), dass man damit den Transport Stream genauer untersuchen kann, aber wozu?
Im Transportstream sind neben Video und Audio Daten auch Daten die Verschlüssellung betreffend mit drin ..... ;) Für Forscher also nicht uninteressant... ;)
Damit kann man z.B. Offline-Decoding betreiben...sprich Entschlüsseln nach der Aufnahme...
-
* FIX BDA: If no satellite was configured for DVB-S when running application for the first time you would get 'failed to initialize driver' message. Under certain conditions you would then never get the chance to configure at least one satellite as it would fail to initialize driver and exit each time application was started.
* FIX BDA: when doing terrestrial band scanning (and some other DVB-T scan operations), an incorrect bandwidth value was passed on to BDA driver.
* FIX: It was not possible to cancel terrestrial and cable MUX band scanning.
http://www.dvbstreamexplorer.dk/
-
Build: 59 (released: 2007-01-07)
* FIX: database export did not work correctly if exported data contained certain stream types.
* PIDSCAN: delivery descriptor information applying for current TS will now be displayed.
* Satellite list mgr: more paramaters can be configured per transponder (DVB-S2 related parameters).
* Satellite list mgr: import/export of transponder INI files.
* Satellite list mgr: satellite list is no longer shared between all DVB-S devices on system. Each device now have their own copy of satellite list.
* Satellite list mgr: transonder list NIT Update and cleanup function has been moved to one dialog on sat list mgr main page. Now NIT Update and cleanup function can be run on multiple satellites in one single operation without the requirment of any user interaction.
* NOTE: due to changes in satellite list mgr, your current satellite settings are lost when upgrading from a previous build. The satellite list will initially be empty. There is no longer a default list. You must first create/import satellites into the list. Then you must configure LNB/diseqc settings for the satellites before you can start using the application.
* Terrestrial MUX list manager: more parameters can be configured for each MUX.
* NOTE: The SI XML file format has been changed to save more information (DVB-S2 related). SI XML files saved with a previous version can not be loaded in this version.
* NEW: in most plug-ins that allow scanning of multiple PIDs, these PIDs can now be selected from a list. The list will only contain PID values relevant for the individual plug-in. I.e. in DSMCC plug-in the list will contain PID values for all elementary streams carrying data/object carousels. The PID values will be grouped by Progam Number/SID to so it can be easily identified which programs the PID's belong to.
* TTUSB2: fixed some issues that could affect TechnoTrend TV-Stick users.
* Added support for TechnoTrend TT-budget S2-3200 and TechnoTrend TT-connect S2-3600.
* DSMCC: improved scanning of multiple data/object caroules on multiple program numbers. It is now necessary to enter program number for each PID added for scanning. It is possible to add identical PID's with different program numbers.
* TTBUDGET: added support for TT Common Interface. To activate decryption, select a channel in service view by double clicking on it.
* NOTE: TT-Micro and Pinnacle PCTV SAT are not supported in this release.
* PIDSCAN: fixed a crash that could occasionally occur shortly after pressing start button.
http://www.dvbstreamexplorer.dk/
-
* BDA: Fixed bug that could cause a crash during application startup.
* BDA: Added DiSEqC support for TechnoTrend Budget and USB2 devices.
* BDA: Improved DiSEqC support for FireDTV devices to also include support for mini DiSEqC and motor control (not tested).
http://www.dvbstreamexplorer.dk/
-
* BDA: minor fixes.
* BDA: Added CI support for TechnoTrend Budget devices (tested with Budget S2-3200). To activate decryption double-clicking on a channel in service view.
* Added option to scan custom band in Cable and terrestrial MUX list managers.
* BDA and TechnoTrend: MUX from Cable and terrestrial MUX list managers can now be selected in tuning dialog.
http://www.dvbstreamexplorer.dk/
-
Neu :
* Added support for DVBWorld DVB-S devices. Tested with 2102 USB box.
* B2C2_2: compiled with SDK version 1.11. This add support DiSEqC 1.2. Note that not all cards support DiSEqC 1.2. Check settings/device info page to see if your card supports DiSEqC 1.2.
* BDA: removed FireDTV DiSEqC option. It has been confirmed that it was not working correctly.
* FIX: pressing cancel in NIT update dialog did not always have any effect.
* FIX: FEC was not correctly imported from transponder .INI files.
http://www.dvbstreamexplorer.dk/
-
Neu in dieser Version :
* DSMCC: fixed bug that when DII messages from multiple carousel download ID's where present on one PID, this could cause Object Carousel's not to be found.
* DSMCC: fixed bug that with some stream content the application would crash after showing PSI scanning dialog but before showing DSMCC dialog.
* BDA: fixed bug that if a filter contained three or more filter nodes (i.e. tuner, capture and PID filter nodes) it would fail to initialize.
* FIX: if Windows System settings were changed or when screen saver kicked in, the application would crash.
* Added support for ATSC. It support scanning of following PSIP tables defined in ATSC standard A/65C: SST, MGT, TVCT, CVCT, RRT, EIT, ETT, DCCT and DCCSCT.
* Following ATSC sources are supported: TS File driver (select TS file and network type ATSC in tuning dialog), B2C2 SDK 1.11 driver (this should work with AirStar2 ATSC and AirStar-HD5000-PCI, but these have not been tested) and BDA compatible ATSC devices (these have not been tested).
* ATSC is limited in functionality compared to DVB. Following limitations apply. These limitations will be addressed in future releases.
* No support for unattended scanning of multiple MUX'es. You must tune on one MUX at the time and perform a ATSC PSIP scan.
* No saving/loading of PSIP information in XML files. No database export.
* Following plug-ins are disabled for ATSC streams: MPE scanner, TeleText, PID Scanner and DSMCC.
http://www.dvbstreamexplorer.dk/
-
Build: 65 (released: 2007-05-17)
* BDA: added support for TT input range DiSEqC control.
* TechnoTrend TV-Stick has been verified to work with DVBSE when using BDA driver.
http://www.dvbstreamexplorer.dk/
-
New:
* BDA fix: When setting a vendor specific option, it would be reset to none on next application startup.
* BDA: Added support for DVB-S2 (8PSK) tuning for TechnoTrend based DVB-S2 compatible devices. You must select 'TechnoTrend DiSEqC 1.2 and CI' as vendor specific option for your device. You should set spectral inversion to automatic for all satellite positions on configuration/Tuning Spaces page. When tuning manually, you should use 8VSB as modulation type when tuning 8PSK transponders. This will be set correctly if you select a DVB-S2 transponder from transponder list. DVB-S2/8PSK should be handled correctly when scanning multiple satellites/transponders for SI information.
* TechnoTrend TT-budget T-1500 has been verified to work with DVBSE when using BDA driver.
* Added support for modulation parameter (S2/DVB-S) when importing transponder INI files.
* FIX: DVB-S2 transponders were not added correctly during NIT update in satellite list mananger.
http://www.dvbstreamexplorer.dk/
-
Neu :
* BDA: fixed crash that sometimes occurred when tuning. The exact cause of the crash is not yet known, but it seems to be caused by some specific content in the stream being tuned on (related to BAT sections).
* AC3 PID (if present) will now be shown as audio PID in service viewer in case no MPEG audio PID is present.
* AC3 PID's (if present) will now be included in the list of available PID's in UDP and VLC streaming plug-ins.
http://www.dvbstreamexplorer.dk/
-
Build: 68 (released: 2007-06-01)
* FIX: Export to database did not work correctly, if there were any H.264 or subtitle streams in data to be exported.
* Added support for import of Kingofsat transponder INI files (no FEC field).
* FIX: running a NIT update in satellite list manager would reset orbital position and west/east flag for the updated satellites.
http://www.dvbstreamexplorer.dk/
-
Build: 69 (released: 2007-06-10)
* FIX: Services in service viewer could not be activated when SI data had been scanned with 'Current Transponder' option.
* Stream lists in Streaming to disk/save PID filtered TS stream and Save SI/Private sections have been resized, so that long stream descriptions can be shown in full.
* FIX: S2 satellite delivery system descriptor was not parsed correctly.
* FIX: FEC 9/10 value was shown as 'reserved' in SI view (SATELLITEDELIVERYSYSTEM_DESCRIPTOR).
* BDA: 8PSK modulation will always be used if modulation system is DVB-S2. This only applies for unattended tuning, i.e. when running a SI scan. This only applies for TechnoTrend DVB-S2 devices as these are currently the only DVB-S2 devices supported by DVBSE.
http://www.dvbstreamexplorer.dk/
-
DVBStreamExplorer 3 build 70
* FIX: If a descriptor failed to be parsed in a SI section, the whole SI section would be discarded and not included in SI tree. Now descriptors that failed to parse will be listed under GENERAL_DESCRIPTOR node.
* FIX: Improvements on import of Kingofsat INI files. Now empty FEC fields, and terminated ';' characters should be handled correctly.
http://www.dvbstreamexplorer.dk/
-
Build: 71 (released: 2007-06-23)
* BDA: added support for 8PSK (for DVB-S2) modulation type.
http://www.dvbstreamexplorer.dk/
-
Build: 72 (released: 2007-06-29)
* Fixed an application crash when doing SI scan using TS File driver.
http://www.dvbstreamexplorer.dk/
-
Build: 73 (released: 2007-07-08)
* TELETEXT: added scanning of multiple TeleText streams in MUX.
* TELETEXT: The collected TeleText data is now displayed in a tree view organized into PID, pages and individual TeleText packets.
* TTPREMIUM: dirver is now now compiled with VC6.
http://www.dvbstreamexplorer.dk/
-
Build: 74 (released: 2007-09-16)
* TELETEXT: Saving collected information as text (PRO version only).
* DSMCC: Saving collected information as text (PRO version only).
* MPE: Saving collected information as text (PRO version only).
* TS File driver: Any operation involving stream capturing will now stop automatically when end of TS file is reached.
* PIDSCAN: added logging of PCR time stamps.
* PIDSCAN: PID's with continuity errors are now marked with '*' in bit rate control. The count of continuity errors is shown in tool tip window when hovering mouse over a PID in bit rate control.
* PIDSCAN: Saving PID tree as text file (PRO version only).
* PIDSCAN: Saving bit rates as CSV file (PRO version only).
http://www.dvbstreamexplorer.dk/
-
Whats new :
* FIX: Priority field was not shown correctly in Terrestrial delivery system descriptor.
* BDA: TT-Connect S2-3650 CI now works with DVBSE. This includes support for CI. To unscramble a service, switch to service view; locate the service of interest and double-click on it.
* BDA FIX: If tuner and capture devices were in the same filter and capture device was not listed in capture filter list, then it was not possible to start the application. A new option has been added to explicitly set capture device to the same as tuner device.
* Service player: added support for EN 300 743 DVB subtitles. (Experimental)
http://www.dvbstreamexplorer.dk/
-
Build: 76 (released: 2008-02-10)
* Service player: added option to select MPEG decoder filters (MPEG audio/video, H264 and AC3) used for service playing.
* Service player: added option to select third party MPEG splitter/de-multiplexer, i.e used with H264 services. Only 'Elecard MPEG Push Demultiplexer' has been verified to work at time of this writing.
* Service player: added support for H264 and AC3 decoding. 'CyberLink H.264/AVC Decoder (TechnoTrend)' has been verified working.
* PIDSCAN FIX: h264/AVC frame height was not shown correctly.
* PIDSCAN: Added logging of PTS/DTS time stamps for PES streams.
* PIDSCAN: Added logging of EMM section and bytes count for CA streams in CAT.
* PIDSCAN: Added logging of ECM section and bytes count for CA streams in PMT.
* BDA: added support for Hauppauge WinTV-NOVA-HD-S2, DiSEqC and DVB-S2 tuning (experimental).
http://www.dvbstreamexplorer.dk/
-
released: 2009-01-08
Some of our customers specifically requested logging of Mega-frame Initialization Packet (MIP) (ref. ETSI TS 101 191) applicable for DVB-T Single Frequency Network (SFN). This build enhances the Professional Edition of DVBStreamExplorer by including MIP logging, available under the 'Current MUX' tab in Transport Stream Monitor.
We also had a few fixes:
* FIX BDA: LNB parameters (low/high oscillator and switch frequencies) configured on tuning spaces tab were not applied when submitting tuning request, causing tuning to fail under certain conditions. This bug was introduced in build 80 and mostly affected users with C band LNB.
* FIX BDA: Unattended SI scanning of multiple DVB-C MUX'es didn't work correctly.
* FIX: DVBSE could crash when loading certain SI XML files that was saved with older versions of DVBSE.
* FIX: DVBSE could crash under certain conditions when doing custom band scan in DVB-C/T MUX finders.
http://www.dvbstreamexplorer.dk/