Seite drucken - AppleWin

PC-Ecke => # Virtualisierung / PC-Emulation => Thema gestartet von: SiLæncer am 07 April, 2019, 09:15

Titel: AppleWin
Beitrag von: SiLæncer am 07 April, 2019, 09:15

(https://i.postimg.cc/05J5RHNJ/MemInfo.png)

Changelog

[Change #631] Improvements for the RGB AppleColor card:

Relax the video-mode precondition to just ignore if VF_MIXED (previously required HIRES on) for Apple II Desktop.
Changing from DHGR B&W mode to HGR remains in B&W (color burst is off).
For '50% scan lines', don't blend in NTSC B&W mode, as this was inconsistent with the RGB colour rendering.

[Change #633] Improvements for the RGB AppleColor card:

Improved the video-mode precondition to ignore if 80COL ($C00C/D) occurs before DHIRESON ($C05F) for Renegade.
Support new switch -rgb-card-invert-bit7 to invert bit7 for Dragon Wars.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.28.6.0
Beitrag von: SiLæncer am 03 Juni, 2019, 04:55

Changelog

[Bug #651] Cycle-accurate interrupts:

Interrupts sources are checked after every opcode (full-speed after every 40 opcodes).
6522 TIMERs in free-running mode now accounts for the underflowed cycles when resetting the count.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.28.7.0
Beitrag von: SiLæncer am 16 Juni, 2019, 08:40

Whats new:>>

[Bug #654] Fix for Sather's "Little Text Window" not rendering correctly.
[Bug #652] Fix for 6522 TIMER1's period to be N+2 cycles.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.28.8.0
Beitrag von: SiLæncer am 29 Juni, 2019, 09:45

Whats new:>>

[Change #648] Support 50Hz(PAL) video refresh rate and implicitly PAL 1.016MHz.
NB. TV video modes still use NTSC rendering.
[Bug #656] Fix for PAGE1/2 ($C054/55) not having a 1 cycle delay.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.0.0
Beitrag von: SiLæncer am 10 Juli, 2019, 05:50

Whats new:>>

[Change #544] Support for .woz disk images.

WOZ1 and WOZ2 formats supported.
read-only: images forced to write-protected (so 'Stickybear Town Builder' doesn't work).
only 5.25" (not 3.5").
known issues: 'Wizardry III' not booting.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.1.0
Beitrag von: SiLæncer am 28 Juli, 2019, 10:45

Whats new:>>

[Bug #662] Fixed WOZ 'Wizardry III' not booting.
[Bug #669] Fixed WOZ 'Space Quest I' not booting reliably.
[Bug #670] Fixed PAGE2 not displaying correctly when in full-speed mode.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.2.0
Beitrag von: SiLæncer am 07 September, 2019, 10:45

Whats new:>>

[Change #678] Hotkeys to change emulation speed:
Ctrl-0 Toggles between custom speed and Full-Speed
Ctrl-1 Sets 1 MHz
Ctrl-3 Sets Full-Speed
[Change #671] Register .woz extension with AppleWin. Updated AppleWin.chm & DELREG.INF.
[Bug #685] Fixed support for French Touch's "CHIP" demo (Mockingboard / multi-TIMER interrupt support).
[Bug #677] Loading a save-state wasn't restoring the pending IRQ.
[Bug #672] For WOZ images: all even disk I/O read accesses will now read the data latch.
[Bug #650] NTSC TV (Color and B&W): image was half an Apple II scanline vertically shifted down.
[PR #674] Prevent uninitialized value bugs and improve string safety.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.3.0
Beitrag von: SiLæncer am 14 Oktober, 2019, 10:15

Changelog

[Change #692] Added command line switch to unplug HDD controller card on exit:
-s7-empty-on-exit
[Change #689] Added command line switches to set CPU speed and machine type:
-clock-multiplier , where value is a [0.5-3.9] base-clock multiplier (ie. same as the Config UI's slider)
-model <apple2|apple2p|apple2e|apple2ee>
[Change #666] Debugger: support showing video v,h and cycle count.
added debugger command: videoinfo <dec|hex|apple|real> to configure display.
added auto-run of DebuggerAutoRun.txt on AppleWin initial start-up.
[Bug #700] Fixed ProDOS8 2.5.0 alpha6:
support INC $C08B (and similar) to set LC to write mode - 65C02 only.
support INC $C08B,X (X=0) to set LC to write mode - 6502/65C02/816. (Fixes #404)
[Bug #695] Fixed WOZ 'Taipan' not booting.
fixed reading write protect on a write access & support Sequencer Function.
[Bug #668] Fixed WOZ 'Seafox' not booting.
set machine = Unenhanced Apple //e or lower & need slot2 empty.
disable SSC in slot-2 using: '-s2 empty' command line switch.
added '-s1 empty', '-s3 empty' and '-s6 empty' too.
[Bug #404] a2audit.dsk 1.06 now working. (See #700)
[Bug #319] SmartPort return address was wrong when crossing page (fix to slot-7 HDD's firmware).
NB. Old save-states where the 6502's PC is in the old firmware now can't be loaded. (AppleWin will show an error)
[PR #687] Replace char * with std::string.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.4.0
Beitrag von: SiLæncer am 25 Oktober, 2019, 04:50

Whats new:>>

[Change #702] Debugger: In soft-switch display (row-80), show a red 'x' when AltZP (and AltLC) is enabled.
[Change #666] Debugger: When video-scanner position is off-screen then show v,h as yellow (was red).
[PR #710] Debugger: Added BPMR and BPMW to break on a read or write (respectively) to a memory address or range.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.6.0
Beitrag von: SiLæncer am 18 November, 2019, 19:15

Changelog

[Bug #724] Fixed so that 6502 interrupt is delayed by 1 opcode when interrupt occurs on last cycle of opcode.
fixes French Touch's "Mad Effect" & "Mad Effect #2" demos.
[Bug #711] Fixed Mockingboard initial "stretched" music playback (regression introduced at 1.28.7.0).
[Bug #707] Fixed ADTPro (running under AppleWin) not working with real COM ports.
[Bug #701] Fixed 6522's TIMER being out-of-sync with 6502.
[Bug #699] Fixed French Touch's "Mad Effect". See #656, #701, #724.
[Bug #680] Fixed video tearing (eg. for FT's "Scroll Scroll Scroll" & "Mad Effect #2").
[Bug #659] Fix for Applied Engineering's Phasor song player (noisy playback) (regression introduced at 1.26.3.4).
[Bug #656] Changed so only TEXT ($C050/1) and MIXED ($C052/3) have a 1 cycle delay (extension to 1.28.8.0).
fixes French Touch's "Mad Effect" demo.
fixes Deater's "Cycle-count Megademo" (vertical GR grey line shouldn't be visible between GR & HGR video).
[Bug #652] Fixed 6522's TIMER to underflow at 0x0000 -> 0xFFFF
and T1C=0x0000 now correctly underflows on next cycle.
[Bug #435] COM ports above COM9 weren't available from the UI.
[Change #716] Help's troubleshooting section: added an item for no Apple II speaker sound.
[PR #715] Memory fix for struct ImageInfo.
[PR #694] Debugger: Symbol loading: Fix random crash upon start up.
Fixed crash with debug command line switches: -m and -no-mb.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.7.0
Beitrag von: SiLæncer am 21 Dezember, 2019, 17:15

Changelog

[Change #726] Disk II card: supported in slot 5 via '-s5 diskii' command line.
use in conjunction with -s5d1 <pathname>.
NB. No support via Configuration GUI for insert/ejecting images.
[Change #737] Debugger: Changed 'cycles' to show the cycle delta since the step/breakpoint etc.
NB. Since 1.29.3.0 this has been the absolute cumulative cycle count.
[Bug #740] Debugger: gr/hgr/dgr/dhgr commands will honour the state of the MIXED mode.
[Bug #733] Fixed WOZ 'Wasteland' and also NIB 'Wasteland'.
[Bug #451] Debugger: fix for BPM[R|W] triggering on control-flow instructions' target address.
[Bug #355] For first-time installs of AppleWin, soundtype now defaults to WAVE (was NONE).
[PR #730] Speed-up for 'Color (RGB Monitor)' video mode.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.8.0
Beitrag von: SiLæncer am 20 Januar, 2020, 05:10

Changelog

[Bug #749] Hotkeys to change emulation speed using Ctrl+n: now ignored if ALT is pressed.
[Bug #748] DiskII: data latch returns a rand() value when no disk is in drive.
[Bug #746] Debugger: correctly repaint Apple II screen when showing it from debugger.
[Bug #745] WOZ: Support for large tracks.

[Bug #743] Added new command line switches:

-left-alt-control-buttons : left-ctrl=button0, left-alt=button1
-right-alt-control-buttons : right-alt=button0, right-ctrl=button1
-swap-buttons : for swapping buttons 0 & 1

[Bug #733] Alternate fix for WOZ 'Wasteland'.
[PR #723] Fixed way to clear a std::string.
Configuration->Input: Added 'Swap 0/1' toggle for swapping buttons 0 & 1.
WOZ support: Removed version check on INFO section.
Display MessageBox with all unsupported commands that were passed in (can choose to continue or exit).
Debugger: Added new 'cycles <abs|rel>' command to show cycles as absolute or relative.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.9.0
Beitrag von: SiLæncer am 27 Januar, 2020, 09:02

Whats new:>>

[Bug #752] Fixed double-clicking a registered file-type issue (regression introduced at 1.29.8.0).
[Bug #750] Fixed Ctrl+Alt+Break wasn't emulating CTRL+OA+RESET (regression introduced at 1.29.8.0).

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.10.0
Beitrag von: SiLæncer am 14 Februar, 2020, 13:10

Whats new:>>

[PR #756] Write support for WOZ1/WOZ2 images.
Fixes titles that need write support (see: #686, #704, #705).
Allow creation of a blank (WOZ2) image (see AppleWin.chm: 'Creating Disk Images').
multi-file zip support extended to scan for the first valid image.
useful for most woz-a-day multi-file zips which have at least 2 entries and previously needed unzipping.
NB. files in multi-file zips are still write-protected (same for all image types, not just woz).

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.11.0
Beitrag von: SiLæncer am 28 März, 2020, 10:45

Whats new:>>

[Bug #771] Added new command line switch to load custom ROM: -rom .
Supports 12KiB (at $D000) and 16KiB (at $C000) rom files.
[Bug #765] Lancaster (Total Replay) hangs when starting second game.
[Bug #734] DiskII controller card: support 13-sector firmware.
The card auto-selects the firmware based on the .woz (v2 or higher) image properties.
Only change the firmware at reset/reboot to avoid changing whilst running in $C6xx space!
Fixes 'The Best of MUSE' & 'MicroChess 2.0' (#732)

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.12.0
Beitrag von: SiLæncer am 26 April, 2020, 21:40

(https://i.postimg.cc/05J5RHNJ/MemInfo.png)

AppleWin is a Apple II emulator for Windows. Applewin runs conveniently in a Window so that it's not taking over your desktop. Screenshots are actual size, for example.

AppleWin offers numerous options for your Apple II to work any way you like. Categories include Configuration, Input, Sound, Disk, and Advanced.

License: Open Source

Whats new:>>

[PR #757] Allow use of an INI-file for configuration instead of the Registry (fixes #709).
new command line switch: -conf
[Change #773] Added Apple II J-Plus support.
[Bug #778] Fixed for when Joystick(s) are disabled.
[Bug #777] Fixed Phasor speech (SSI263) to match Mockingboard (when in Mockingboard mode).
fixes: #698 (Rescue Raiders), #753 (Bejeweled).
also improvements to Phasor card's native Phasor mode.
[PR #775] Debugger: Fixed so that hitting "=" in the debugger sets PC to the current cursor address.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.13.0
Beitrag von: SiLæncer am 01 Juni, 2020, 10:30

Whats new:>>

[Bug #790] Fixed regression for -d1,-d2 & -s7-empty-on-exit (introduced at 1.29.7.0).
[Change #787] Debugger: Extended 'cycles part' command to do timings relative to a user-specified base.
[Change #783] Debugger: Extended 'tf' command to include cycle count.
[Change #720] Debugger: Added more symbols to APPLE2E.SYM.
NB. LC ($C08n) symbols are now correct for the LC, so 'LDA $C08C,X' will disassemble as 'LDA LCRAMIN1_,X' instead of 'LDA DATASTROBE,X'. But now perhaps less helpful when stepping Disk II code.
[PR #785] Debugger: Improvements to Bookmarks.
AppleWin.chm: Added debugger help about Bookmarks.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.29.14.0
Beitrag von: SiLæncer am 19 August, 2020, 18:20

Changelog

[Change #822] Updated Uthernet card support to use Npcap for Win10.
[Change #806] Added support for 'Base 64A' - a Taiwanese Apple II clone.
[Change #763] Support for PAL(50Hz) killing color-burst during TEXT video mode.
When 50Hz, then AppleWin's window title changes to "Color (PAL Monitor)" instead of "Color (NTSC Monitor)"
[Change #781] Loading a large save-state takes some time - added a busy indicator.
[Change #139] NIB disk image: added warning if any track's first D5-nibble triple isn't an address prologue.
[Bug #824] Fixed a regression in multi-zip support (introduced at 1.29.10.0).
[Bug #820] Fixed a GDI Object leak (occurring when accessing the Disk II with AppleWin minimised).
[Bug #813] Mockingboard playback looping after entering debugger then configuration.
[Bug #809] Fixed a memory leak.
[Bug #801] Wrong timing with LSR abs,X / ROR abs,X / ROL abs,X for the 6502 CPU.
[Bug #796] Fix for 'IRQ occurring on last cycle of opcode' not always true.
[Bug #751] No-Slot Clock running and power-cycle can causes lock-up on power-cycle.
NSC state persisted to save-state.
added a new switch '-no-nsc' to configure Apple II without an NSC.

[Bug #663, #691] Fixes for image loading switches (-d1,-d2,-h1,-h2,-s5d1,-s5d2):

support relative paths (#663).
updated the current directory with the path for each loaded image (#663) & when saving state (#691).
added a new switch '-current-dir <path>' to guarantee the current dir after using image loading switches.
[Bug #52] Fixed the 6502/65C02 false-read of 6522 issue for Willy Byte!
[PR #800] Improved debugger's rendering speed for PrintGlyph().

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.0.0
Beitrag von: SiLæncer am 18 April, 2021, 22:00

Changelog

Note: This version only works under Windows XP and later.

[Change #693] AppleWin built with VS2019 using v141_xp platform toolset
[Change #939] Improved support for SSI263 speech chip.
Fix for 'Classic Adventure' (#929) not detecting speech chip.
Support the 2-bit Duration b7:6 of phoneme register for SSI263 (not SC01).
Support 2nd SSI263 at $Cn20 connected to 6522-A (at $Cn00).
SC01: only support it mapped to 6522 at $Cn00.
[Change #936] Swap Joystick Buttons not working
Command line (-swap-buttons) or GUI "Swap 0/1" now swaps buttons 0/1 for all devices.
[Change #930] WOZ support: add some random jitter in the bit stream
A better alternative fix for WOZ images: 'Wasteland' and 'Legacy of the Ancients'.
Fix for WOZ images: 'Gruds in Space' (bug #921) and 'Buzzard Bait' (bug #930).
[Change #912] For 'Base 64A' add support for its F2 key via the Windows DEL key.
[Change #876] Starting up windowed mode & fullscreen mode
New command line switch -no-full-screen to start in windowed mode.
Added command line switch -full-screen as an alias for -f.
[Change #864] Anti-M 1.8 doesn't work
Improved Disk II card's data latch value when: (a) drive disconnected or (b) connected, but empty.
New command line switches -d1-disconnected and -d2-disconnected to disconnect drives from slot-6 card.
[Bug #934] Characters doubled in BASIC.SYSTEM when using -speech switch.
Trap calls to COUT1 and BASICOUT (instead of COUT).
[Bug #827] Fix bug where NSC is recognised on Apple II/II+ when slot-3 is empty.
Support NSC on 6502-based Apple II's via F8-ROM for ProDOS 2.5 compatibility.
[Bug #770] Fix so that no AY changes get dropped.
Support reading the AY-3-8913 registers (not Phasor though).
[Bug #652, #833] Fixes for Mockingboard's 6522 VIA.
Cycle-accurate TIMER1/2 r/w for all addressing modes.
Support TIMER1 latch in one-shot mode.
Improve 6522 reset support - only ACR,IFR,IER affected.
[PR #891] Fix for "Unable to capture PrintScreen key" warning on startup.
Adds a "Don't show this message again" checkbox to the message.
Debugger: add red 'IRQ' after the v/h-pos when IRQ is being asserted to the 6502.
Debugger: improve mini-memory views for 6522 & AY8913 chip registers.
Much refactoring to the code by Andrea Odetti / @audetto.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.1.0
Beitrag von: SiLæncer am 03 Mai, 2021, 22:30

Whats new:>>

Improve Mockingboard's 6522 support for cycle-accurate reading of IFR at Timer1/2 underflow.
Improve logging of Speaker code.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.2.0
Beitrag von: SiLæncer am 01 Juni, 2021, 09:10

Whats new:>>

[Change #947] Uthernet: fix so that a h/w change doesn't require the app to be close & reopened. [audetto]
[Change #876] Command line: change -fs-height so only applied during full-screen (Windows mode unaffected).
[Bug #958] Debugger: Mockingboard speech interrupt not working in debugger 'gg' mode.
[Bug #952] Fix Mockingboard SC-01 speech for Ape Escape.
Fix Phasor regression (at 1.30.0.0) as it does support reading AY-3-8913 registers in Mockingboard mode & Phasor native mode (just not Echo+ mode).
Debugger: when displaying 6522 registers, if T1 and/or T2 is active, then display in white.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.3.0
Beitrag von: SiLæncer am 20 Juni, 2021, 10:20

Whats new:>>

[Change #962] Remove the HookFilter.dll, and statically link instead. this removes the runtime dependency on VCRUNTIME140.dll (ie. vc_redist.x86.exe).
[Bug #965] Fix display flicker on exit.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.4.0
Beitrag von: SiLæncer am 29 August, 2021, 21:20

Whats new:>>

[Change #975] Extend Configuration's Disk GUI to support a Disk II controller in slot 5.
[Change #977] Add per-slot configuration to the Registry (and conf.ini).
eg. "Last Disk Image 1" has moved from "Preferences" to "ConfigurationSlot 6".
[Change #976] AppleWin's help now documents Control-PrintScreen to copy the debugger's disassembly window to the clipboard.
[Change #960] Floppy image names are now stored in Registry (or conf.ini) with their full path.
NB. Hard disk images were already stored with full path.
NB. save-states still only store the filename (and use "[HDV] Starting Directory" or prompt user to find the file).

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.5.0
Beitrag von: SiLæncer am 03 Oktober, 2021, 11:20

Whats new:>>

[Change #972] Add SNES MAX card (in slots 3, 4 or 5) to support up to 2 SNES (or 12-button) controllers.
[Change #946] Add 4Play card (in slots 3, 4 or 5) to support up to 4 Atari controllers.
[Change #420] Uthernet card's state persisted to save-state.
NB. it's best to get your DHCP server to assign a static IP for the card's MAC address.
Change: SAM card's state persisted to save-state.
[Bug #980] Fix 'Authentic Disk Speed' regression (at 1.30.4.0).
[Bug #981] Fix command line -d2 (and -h2) which weren't reporting an error if image couldn't be opened.
[Bug #981] Support command line if there are multiple spaces between args.
[PR #983] Improve save-state card management
Use Registry "ConfigurationSlot n' locations to save each card's type & config.
eg. "Last Harddisk Image 1" has moved from "Preferences" to "ConfigurationSlot 7".
AppleWin's Debugger help: document how to allow CTRL+SHIFT+0 to work (to set bookmark-0).

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.6.0
Beitrag von: SiLæncer am 30 Oktober, 2021, 20:15

Whats new:>>

Fix Mousecard not persisting after a machine's hardware changes. (Regression at 1.30.5.0)
Fix one-shot paddle timers. [xotmatrix]
Debugger: Fix disassembly for NMOS 6502's JMP (Indirect) not showing correct target address.
[Change #987] Debugger: Add 'lbr' command to show Last Branch Record for a change to the control-flow from an instruction or interrupt.
NB. Bcc opcodes that aren't taken don't affect lbr.
Debugger: Add 'brkint <on|off>' command to break at the instruction after an interrupt is taken.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.7.0
Beitrag von: SiLæncer am 20 Dezember, 2021, 17:20

Changelog

[Bug #997] Support VidHD card for IIgs Super Hi-Res (SHR) video modes, eg. for Total Replay box art.
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd').
Only partial VidHD support - ie. just for SHR video modes, but SHR is supported for all Apple II models.
NB. AppleWin's window is slightly enlarged when VidHD card is inserted.
Command line: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
eg. for 4:3 aspect ratio on monitors that support it: -no-full-screen -fs-width=1600 -fs-height=1200
Debugger: add 'shr' command to view video.
[Change #1007] HDD: Fail if r/w access touches $Cnnn I/O space
Debugger: On a HDD r/w failure, execution will break, and the debugger will show a stop reason message.
Also fix HDD write wrapping at 64KiB boundary.
[Change #996] Adapt HDD firmware to be slot-independent.
Internal only, since currently no support to specify HDD Controller card in another slot.
Debugger: Add 'brk all <on|off>' command to break on any BRK or invalid opcode.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.8.0
Beitrag von: SiLæncer am 09 Februar, 2022, 06:15

Changelog

[Bug #1023] WOZ support: Tweak to track sync support.
[Bug #1020] WOZ support: Significant bit-cells after a gap between latch access upped from 50 to 100.
Fixes: What's My Logic, Forbidden Quest, The Isle of Mem.
[Bug #1018] Support AN3 for //e models.
[Bug #1015] Registry: fix support for legacy 'Harddisk Enable' key.
[PR #1028] Internal: Split 6522 out of MB code and into own class (bumps MB version in save-state).
[PR #1025] Load save-state for Cards: improve error messages. [audetto]
[PR #1014] Correct BMP creation. [audetto]
SSC: Fix for command line -dcd not being honoured. (Regression)
VidHD: Fix load save-state for II/II+ when VidHD's SHR is being updated.
Debugger: see Debugger_Changelog.txt, but including:
Added: CD now detects ".." to change to the previous directory and chops the trailing sub-directory from the current path.
Changed: Disassembly window now lists symbol labels and symbol target address from User2 in orange.
Added: Branch instructions now show target address.
Added: Disassembly window now shows signed decimal values for immediate values.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.9.0
Beitrag von: SiLæncer am 24 März, 2022, 09:20

Changelog

[Change #518 ] Support Uthernet II card in slot 3. [audetto]
EG. Use with Contiki, A2osX, ii-vision, a2stream etc.
Support for W5100 modes: TCP, UDP, IPRAW and MACRAW (no support for PPPoE mode, interrupts and SPI).
[Bug #1066 ] Fix for save-states where (eg) disk image name contains '#' character.
[Bug #1017 ] Fix for printer interface where character got output twice.
[PR #1031 + others] Internal: refactor string output handling. [kiyolee]
Change: default install of AppleWin now sets slot 3 as empty (was Uthernet I card)
Fix 6522 bug: IFR.T2 was always set when counter.b15=1

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.10.0
Beitrag von: SiLæncer am 28 Mai, 2022, 10:20

Changelog

[Change #1097] Extend Uthernet II to support DNS offloading. [@audetto]
Details: https://github.com/a2retrosystems/uthernet2/wiki/Virtual-W5100-with-DNS
No need for ethernet, so now works with host PC's WiFi.
Supported by @oliverschmidt's A2Stream v1.2.
NB. This virtual DNS is enable by default (but can be disabled via the Config UI).
NB. Real W5100 chips don't offer this!
[Bug #1078] WOZ support: Better LSS support for reading write-protect.
Fix images 'Run For It' and 'Stickybear Town Builder' (both when write-protected).
[PR #1100] Uthernet II fixes for UDP and IPRAW modes. [@audetto]
[PR #1084 + others] Internal: refactor debugger. [@kiyolee]
Fix Phasor card: use correct primary AY8913 for Phasor-native & MB modes (now checked in mb-audit v1.2).
Command line: add -wav-speaker & -wav-mockingboard
Save a .wav of either Speaker or Mockingboard audio output during the emulation session.
Warning: there's no file size limit, so it just keeps saving until AppleWin exits.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.11.0
Beitrag von: SiLæncer am 24 Juni, 2022, 06:15

Changelog

[Change #1103] Debugger: support memory breakpoints for HDD DMA r/w's:

When the debugger is active (eg. breakpoints enabled) then trap on HDD r/w's that match the BPM[R|W].
NB. the breakpoint will fire after the whole HDD r/w operation has completed.
[Bug #1113] Fix for Uthernet II registers repeating in DEVICE SELECT I/O space. [@audetto]
[Bug #1110] Fix for WOZ and quarter tracks for A2osX's 192K floppy image.
Support two adjacent phases turned off in rapid sequence.
[Bug #1108] Fix for C3 ROM not set correctly when loading a save-state with a VidHD (in slot 3).
[Bug #1106] Fix for minor screen corruption with VidHD enabled.
Debugger: fix for mouse-click hit-tests with VidHD enabled.
[Bug #1104] Fix for rare Mockingboard speech race condition when debugger-stepping.
[PR #1098] Internal: refactor debugger. [@kiyolee]
Change: Mockingboard's SSI263: support reg3's amplitude (fix for TR speaking during SSI263 detection).
Change: DebuggerAutoRun.txt: extend search path to first try CurrentDir, then ProgramDir.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.12.0
Beitrag von: SiLæncer am 28 September, 2022, 05:50

(https://i.postimg.cc/05J5RHNJ/MemInfo.png)

Changelog

[Bug #1128] Increase paddle maximum offset - fixes 'Learning with Leepers'.
[Bug #1127] Debugger: fix memory search command.
[Bug #1126] Fix rare crash bug (when unprotected WOZ in drive).
[Bug #1125] Improve WOZ support: fixes 'Accolade Comics'.

[Bug #1121] Fix for aspect ratio in full-screen:

Now revert to uniformly scaling in both x & y directions unless user specifies resolution.
NB. Regression at 1.30.7.0 when adding VidHD support.
[Bug #1119] Fix render issue in 'Color (PAL Monitor)' video mode.
[Bug #1022] WOZ support: Better cross-track positioning - fixes 'Balance of Power'.
Fix for loading old save-states with Phasor card (bumps MB version in save-state to v9).
NB. Regression at 1.30.10.0 when fixed Phasor to "use correct primary AY8913".
Change: Command line: support '-s2 ssc'.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.14.0
Beitrag von: SiLæncer am 06 März, 2023, 10:40

Changelog

[Change #1080 ] Support Mockingboard and Mouse at same time. (Improvement for: "Witch Trial".)
[Change #1187 ] New command line: '-capslock=off' to start up with Caps Lock off.
[Change #1183 ] Phasor: add support for Echo+ mode (eg. 6522 PortA chip select for the AYs, dual-mono sound output & reading AY regs).
[Change #1190 ] Document command line: '-multimon'.
At start-up, use the Registry's saved "Window x/y position" to position the AppleWin window correctly for multiple monitors.
[Change #1033 ] New command line support for hard disk controller in slots 5 and 7.
Use '-s5 hdc' or '-s7 hdc' to start up with a hard disk controller (hdc) in slots 5 and 7 respectively.
Use '-s5h1 <pathname>' and '-s5h2 <pathname>' to connect hard disk images.
NB. There's no GUI configuration support for the hdc in slot 5.
NB. An hdc in slot 5 allows these 3.5" titles to work: "Perplexing Puzzles" and "Dark Heart of Uukrul".
[Bug #1193 ] Phasor: now can't read AY regs (via 6522 PortA) after AY set to INACTIVE function. (Mockingboard still can.)
[Bug #1192 ] Phasor: support the GAL logic for AY Chip Select & AY PSG Function.
[Bug #1188 ] Alt+Enter: fix regression, as this key combo should default to toggling full screen.
[Bug #1175 , #1176 ] Mockingboard: fix some edge cases.
[Bug #1164 ] Debugger: Fix 'bpv' & 'tf' commands to trigger for non-visible scan lines when in full-speed.
[Bug #1163 ] Debugger: Fix disassembly when in middle of data.
[Bug #1099 ] Fix 6502/65C02: Clearing the D flag (or not) on a BRK or Interrupt or Reset.
[PR #1171 ] Refactor the Mockingboard & Phasor code.
Can now put any sound card (Mockingboard, Phasor or SAM) into either or both slots 4 and 5.
NB. Allows Mouse card in slot 4 and Mockingboard (or Phasor) in slot 5.
Change: Command line '-s<N> empty' now works for slots 1-7 (just not slot 0).
Debugger: Improve mini-memory views for AY8913 chip registers: show reg. latch address in white.
Debugger: Fix 'zpc' command, which wasn't working.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.14.1
Beitrag von: SiLæncer am 12 März, 2023, 09:40

Whats new:>>

[Bug #1193 ] Fix for reading AY regs after AY Function set to INACTIVE. (Fix for mb-audit v1.3 .)

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.15.0
Beitrag von: SiLæncer am 30 Juli, 2023, 09:50

Changelog

[Change #1162 ] Fix joysticks not detected: first & second devices are not always at index 0 & 1. [ @fabricecaruso]
[Change #429 , #1237 ] Joystick axis shaping: allow analog sticks to reach corners.
[Change #1247 ] Support Robocom Ltd's BitStik Interface Module protection key.
[Change #1198 ] Support Dynatech Microsoftware / Cortechs Corp's CodeWriter protection key.
[Bug #1240 ] Fix for very large (>800KiB) 5.25 WOZ files.
[Bug #1215 ] Fix for: Disk Status getting ?? for Sectors in ProDOS.
[Bug #1238 ] Debugger: 2.9.1.25 Fixed: R P ## wasn't setting P flag status register.
[Bug #1231 ] Debugger: Fix disassembly of current line is illegible in "black & white" mode.
[Bug #1204 ] Debugger: Crash due to debugger command line length.
[Bug #1194 ] Debugger: Step-over WAIT can fail.
[Change #1230 ] Debugger: Allow alternate directory for built-in symbols.
[Change #1229 ] Debugger: df ("define float") QoL.
[Change #1212 ] Debugger: DISK INFO QoL.
[Change #1209 ] Debugger: Update BMP import from GIMP 2.10 with X8 R8 G8 B8.
[Change #1203 ] Debugger: Debugger: Step-over QoL.
[Change #1200 ] Debugger: Debugger: Stop reason QoL.

[close]

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.16.0
Beitrag von: SiLæncer am 28 November, 2023, 11:10

Whats new:>>

[Change #1258] New command line: -mac-lc-card-dlgr to support the DLGR bug in the 'Apple IIe card Mac LC'.
NB. This switch only has an effect when in either "Color (Composite Idealized)" or "RGB Card/Monitor" video modes.
[Bug #1197] Phasor: 6522's AY RESET always resets both attached AYs, regardless of Phasor mode or chip-select bits.

https://github.com/AppleWin/AppleWin

Titel: AppleWin 1.30.18.0
Beitrag von: SiLæncer am 24 März, 2024, 10:20

Whats new:>>

[Change #1272] New HDC firmware v2 to support returning HDD size in Y:X for status call. [@peteri]
[Change #1277] Add (debug) cmd line switch to revert to HDC firmware v1: -hdc-firmware-v1.
[Change #1279] Support Saturn RAM card in slot 3 for any Apple II model (for Robo Systems' RoboCAD 2).
[Change #1159] Speaker: change from mono to stereo sound buffer.
[Change #1247] Robocom's Interface Module dongle: use actual values for 1000 & 1500 series dongles.
[Bug #1261] Fix for $C010 which should not read the keyboard latch on Apple II and Apple II+.
[Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is on stack and SP points to ABS16!
[Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity.

https://github.com/AppleWin/AppleWin

DVB-Cube <<< Das deutsche PC und DVB-Forum >>>

PC-Ecke => # Virtualisierung / PC-Emulation => Thema gestartet von: SiLæncer am 07 April, 2019, 09:15