Autor Thema: SmartDVB 0.3.5.7 Beta 3  (Gelesen 10405 mal)

0 Mitglieder und 2 Gäste betrachten dieses Thema.

Offline ritschibie

  • Aufpass-Cubie
  • *****
  • Beiträge: 10502
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.5 Beta 1
« Antwort #45 am: 29 August, 2013, 21:16 »
I have tested for a few hours now the "beta 1" with my new usb-box " TT-connect S2-3650 CI". I had some fears regarding the CI functionality because I remember that someone with the same box had difficulties in getting pay-tv running with 030 RC. The good news is that I had no problems (had to fumble around with "CI" settings but I've done that before). So far I encountered no real problems and find the program still very powerful yet (for normal tasking like recording, manually setting reordings, etc.) easy to handle. Next test will be a multirecording (starting with recording 2 channels simultaneously on SKY). As I did'nt have any success with this with 030 I am really looking forward to see what happens there with 035 beta 1.

What is not an issue with the program but with the box are the channel change times. From previously 1 - 2 seconds this is now a 5 - 10 seconds affair. Not really annoying but at least a liitle bit a "retro" feeling  ;)

Excellent work so far! Thanks for your continued input!

Ritschie
Intel Core i7-4770K - ASRock Z87 Extreme6/ac - Crucial Ballistix Sport DIMM Kit 16GB, DDR3-1600 - Gigabyte Radeon R9 290 WindForce 3X OC
TBS DVB-S2 Dual Tuner TV Card Dual CI  - DVBViewer pro 5.3 und Smartdvb 4.x.x beta - 80 cm Schüssel, 2xQuad-LNB - Astra (19.2E)/Hotbird (13E)
I-net mit Motzfuchs ; WLAN: Fritz 7390; BS: Windows 10

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.5 Beta 1
« Antwort #46 am: 29 August, 2013, 22:50 »
Strange, I am also using an USB box (Tevii) but i do not see any differences in switch times to the PCI card, maybe the CI is the problem.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.5 Beta 1
« Antwort #47 am: 29 August, 2013, 22:53 »
@dada: epg issues noted, should be corrected for next revision (other users have mentioned this too).
@rischibie: good to see you once more here too. Uhm, sounds slow indeed, i presume that's for ci stations not encrypted stations? Do you have about the same tune times with other programs?
br,
jack
edit: @dada: u wrote the same about ci while i typed here. Btw, ritchibie, i've tested multiple mux records myself quite a bit so i hope it runs with u too (haven't had reports about that so probably ok :))..

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.5 Beta 1
« Antwort #48 am: 30 August, 2013, 22:45 »
Hi Jack, that's incorrectly expressed by me. I do not use a CI, I wanted to say that the USB box might not be the problem because the swirch times are sa rapid as with my S2-3200 PCI card.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.3.5 Beta 1
« Antwort #49 am: 31 August, 2013, 21:37 »
Another small bug, but I think it startet with Beta 1 as I did not recognice it in PreBeta:
Wenn doing drag and drop with the channes in my favourites, it drops on position too low.
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline ritschibie

  • Aufpass-Cubie
  • *****
  • Beiträge: 10502
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.5 Beta 1
« Antwort #50 am: 31 August, 2013, 23:54 »
Maybe the extended switch times were caused by a broiken Diseq switch - I will test that tomorrow (when I get one by a friend).Being plugged only to Hotbird (as of today) the switch times were indeed much faster.

Multirecording: To start with I recorded with my Sky (German) card and an Alphacrypt light in the CI simultaneously "Sky Cinema HD" and "Sky Sport HD 1". No problems, both recordings showed up and after a quick look at the recordings I saw no errors. Might be that Jack got now his first report for successfull recording with an USB-box and Alphacrypt light and a Sky card  :)
Intel Core i7-4770K - ASRock Z87 Extreme6/ac - Crucial Ballistix Sport DIMM Kit 16GB, DDR3-1600 - Gigabyte Radeon R9 290 WindForce 3X OC
TBS DVB-S2 Dual Tuner TV Card Dual CI  - DVBViewer pro 5.3 und Smartdvb 4.x.x beta - 80 cm Schüssel, 2xQuad-LNB - Astra (19.2E)/Hotbird (13E)
I-net mit Motzfuchs ; WLAN: Fritz 7390; BS: Windows 10

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.5 Beta 1
« Antwort #51 am: 01 September, 2013, 02:02 »
I was having a minor problem with receiving BBCOne and Two HD on 28.2 with sdvb 0.3.5 beta1. It was scanned by the scanner but only showed a black screen after selecting the channel. The reason was that in the 0282.ini the fec was set wrongly to 8/9 and I had not set fec to "auto". Correction to 2/3 solved the problem. As said, quite a minor problem ;)
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.5 Beta 1
« Antwort #52 am: 07 September, 2013, 16:12 »
@dada: noted, do you sync with kingofsat etc? Might be the best solution for now, .ini's r outdated once more.
@ritchubie: good to know, switch times of 4+ secs do indeed seem much too much, never seen a device that's that slow. Still one could not exclude it from perhaps being app diseqc bug or some other issue.
@snoop: noted, drag/drop should drop below the selected item, never above (i'll make the drop images reflect this, during development of that I initially dropped above the items, but later decided to modify that coz I found it more convenient at some situations).
btw once more excuses for somewhat belated response here, but once more we had quite some good post summer weather here, better make some good use of that we know what winter's like over here, so enough long winter coding nights at store.

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.3.5 Beta 1
« Antwort #53 am: 07 September, 2013, 16:47 »
No need to explain any delay - there is no delay! It's your project and your time. :)
Enjoy summer as long as it lasts! We had some good days, too.  8)
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
SmartDVB 0.3.5 Beta 2
« Antwort #54 am: 08 September, 2013, 23:19 »
ok ok. Btw pm sent with new 0.3.5 b2. I hope most mentioned issues (with epg, drag/drop etc) got fixed now. Due to popular demand I've added a pip tab menu, main reason for this second beta.
https://dl.dropboxusercontent.com/u/51980102/SmartDVB035beta2.zip
@silencer: that issue you mentioned should be ok with this version (I hope).

best regards,
JackJavo

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189165
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.3.5 Beta 2
« Antwort #55 am: 09 September, 2013, 15:44 »
thx for the new Beta... working good so far :)

maybe i was not clear enough what i meant before ... e.g. when using sdvb in fullscreen mode on second monitor ... when not using smartOSD ... it would be very useful in my eyes to have the same conext menu option ´station list´ etc. like in the pips .. e.g to open a pip on the first monitor ..

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.5 Beta 2
« Antwort #56 am: 09 September, 2013, 20:57 »
ok silencer. Still some issues reported/found (on my own forum etc) so good that it's still beta. I understand now, i'll make sure that's added sounds logical ofcourse (it's there with the windowed mode also ofcourse, I don't use fullscreen mode that much myself :)..
br,
jack

Offline ritschibie

  • Aufpass-Cubie
  • *****
  • Beiträge: 10502
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.5 Beta 2
« Antwort #57 am: 14 September, 2013, 21:41 »
Hi,

Tested the PIP function with Alphacrypt Light-CAM. Encrypted channels would not appear in the PIP window (1,2,3) whereas non encrypted channels on the same transponder would show up. All other functions I tested like manual recording, manual recording time setting, programmed shutdown a.o.) are functioning very well.

Greetz
Ritschie
Intel Core i7-4770K - ASRock Z87 Extreme6/ac - Crucial Ballistix Sport DIMM Kit 16GB, DDR3-1600 - Gigabyte Radeon R9 290 WindForce 3X OC
TBS DVB-S2 Dual Tuner TV Card Dual CI  - DVBViewer pro 5.3 und Smartdvb 4.x.x beta - 80 cm Schüssel, 2xQuad-LNB - Astra (19.2E)/Hotbird (13E)
I-net mit Motzfuchs ; WLAN: Fritz 7390; BS: Windows 10

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.5 Beta 2
« Antwort #58 am: 15 September, 2013, 13:54 »
Hi,

PIP with ci would have issues atm, to be able to decrypt multiple stations at the same time special ci sdk calls r needed, which have to be implemented by the sdk too, I know for technotrend this exists but isn't implemented (also due to reports I read of instability when using those functions). So for the future, unless you're able to access this once more through some plugin which would request or handle this somehow.

Offline stuart

  • Mega-Cubie
  • ****
  • Beiträge: 193
Re: SmartDVB 0.3.5 Beta 2
« Antwort #59 am: 15 September, 2013, 19:05 »
Hallo,

ich schreibe jetzt mal nicht englisch, ist dann bestimmt auch für Jack leichter zum Lesen...  ;)

Wenn ich mit SDVB eine Aufnahme zB. von ZDF HD-ts oder Pro7 SD-ts mache, kann SDVB die eigene Aufnahme nicht abspielen und stürzt dann mit laufenden Error Reports ab.
Eine Aufnahme von 3sat SD-ts kann man abspielen, allerdings ohne Ton. Mit VLC kann man die Aufnahmen problemlos abspielen.
.mpg-Aufnahmen enthalten weder Bild noch Ton.

...oder hab ich was falsch eingestellt...?  :)

Gruß
stuart
C2D E6600, ASUS P5B, 3GB DDR2-800, Samsung F3 HD103SJ 1TB, Samsung HD501LJ 0,5TB, ATI HD5750 9.12.0.0, TT S2 3200 CI 5.0.1.8, Win 7 Pro 32bit, DVB ViewerPro 5.2.0.0, SmartTitaniumQuadro - Smart MS-5/8ES, Firefox 26, VLC 2.0.5, Fritz7390, Powerline PL200D WLAN, WD TV Live,
Xperia Z 4.2.2, RaspPi B