Diverse DVB Software für verschiedene Karten > # DVBViewer

TransEdit ...

(1/12) > >>

ritschibie:
In der DVBViewer Customer Area ist ein kleines update für TransEdit erschienen. TransEdit 3.3.2 hat gegenüber der Vorgängerversion folgende Änderungen erfahren:


--- Zitat ---- Added: Detection of two more DVBWorld DVB-S/S2 devices in order to make DiSEqC work - there's such a variety, they seem to manufacture an individual device for each customer wink.gif

- Enhanced: Distinction of two identical DVB devices in a PC if the driver is not able to keep them correctly apart (following a concept by Lars). Should supersede the "SkipComponents" tweak (-> forum search) that previously was necessary in such cases. Manually added SkipComponents entries in TransEdit.ini are ignored if TransEdit 3.3.2 finds means to perform an automatic distinction.

- Fix: The transponder lists in the 3.3.1 ZIP contained my personal blind scan and channel group settings, which may lead to confusion.
--- Ende Zitat ---
Quelle: http://www.dvbviewer.info/forum/

SiLæncer:
TranEdit 3.3.4 is available in the members area:

- Fix: Some bugs related to ATSC scanning (untested).

- Fix: Two UniCable-related issues (wrong UniCable power_off command, TechnoTrend S2-3200 must be explicitely set to 13V LNB voltage before releasing the device).

- Fix: In case of two or more Medion DVB-S/T hybrid cards in a PC only one of all tuners was available at a time.

- Fix: There were still problems with saving window positions and settings when closing TransEdit. I hope I finally got it right now. blush.gif

- Enhanced: Multi-monitor support. Windows will re-appear on the monitor where they were closed. If the monitor is not available, windows will be automatically re-directed to the primary monitor.

- New: Copy to Clipboard command in the context menu of the scanner window. At the moment completely useless smile.gif Transfering scan results via clipboard will be supported by future DVBViewer versions (at least DVBViewer GE).

- Updated: Transponder lists for Astra 19° East and Hotbird 13° East, the latter including changes Eutelsat had to apply due to jamming attacks on uplink frequencies by the Iran government. The 12226 V transponder has been split; VOA PERSIAN is now available on a separate low symbolrate transponder (12242 V); BBC Persian on other satellite positions.

- Minor fixes, some restructuring of the scanner window code.

http://www.dvbviewer.com/members/

SiLæncer:
TranEdit 3.3.5 is available in the members area:

- Fix: Multi-monitor support (introduced in 3.3.4) didn't work as expected. Windows didn't re-appear on the monitor where they were closed.

- Fix: Selecting a new output directory for the Analyzer (Settings > Analyzer > Output Directory) with the Folder Button didn't activate the Save Button in the Settings Window.

- Fix: ATSC scanning didn't detect the channel names correctly

- New: Scan -> Scan TS file (also available in the Context Menu of the Transponders List). Enables feeding the scanner with a TS file source.

This is a debug facility for scanner problems with DVB/ATSC networks / transponders that I can't receive. The scan results cannot be exported to DVBViewer since parameters like frequency, symbolrate etc. can't be retrieved from a file.

- New: Select PAT, SDT & PMT PIDs menu item in the Context Menu of the Analyzer's PID List.

This is helpful if you encounter scanning issues and want to support debugging by providing a sample TS file. Select the affected transponder, start the Analyzer, let it work for approx. 30 seconds, select the PAT, SDT & PMT PIDs, record the selection for approx. 30 seconds, zip the resulting TS file and attach it in the forum or provide it elsewhere for download. If EPG issues have to be handled, additionally select EIT PID 18 before you start recording. It may increase the file size considerably, however.

- New: Checkbox Settings -> Scanner 1 -> Assume ATSC when scanning a TS file. Lets the TransEdit Scanner regard the content of a TS file as ATSC (not DVB compliant) if ticked.

Analyzing ATSC transponders is not yet supported by TransEdit. It will probably be added in future.

- Added: DiSEqC 1.1/1.2 support for KNC / Satelco / Mystique DVB-S/S2 devices.

Please note: DiSEqC 1.1/1.2 support for these devices requires the file KNCBDACTRL.dll version 1.2.1208 or later, as included in recent GlobeDigital installations (KNC TV app) or in DVBViewer Pro Beta 4.2.x (see here). This DLL version is not compatible with DVBViewer Pro 4.1.x or the Recording Service! Additionaly it may be necessary to install the Microsoft Visual C++ 2008 Redistributable Package. Without the DLL only DiSEqC 1.0 is supported. Copy the DLL to the TransEdit directory, if not yet present.

- Added: DiSEqC 1.1 support for TechniSat SkyStar2. Enables using the DiSEqC Editor for setting up DiSEqC command sequences as required for cascaded resp. uncommitted/committed switches.

Please note: DiSEqC 1.1 support for the SkyStar2 only works with the network driver, not with the BDA driver. It requires the "Use standard interface off" mode (see Settings -> Hardware). In my experience a delay of at least 250 ms must be inserted between two commands to make it work reliably. DiSEqC 1.2 (positioner commands) are not supported.

- Added: Unicable support for the TechniSat SkyStar2 (experimental). It is subject to the same conditions as DiSEqC 1.1 (see above).

If you want to connect a SkyStar2 to a EN 50494 UniCable system, please post here. It is a German thread, but you may also post in English.

- Updated: Transponder list for Astra 19° East.

- Some minor fixes and enhancements.

http://www.dvbviewer.com/members/

SiLæncer:
TransEdit 3.4.0 is available in the members area.

Several parts of the Scanner Window and related code have been restructured / reworked. Particularly features that are helpful for DVBViewer channel list maintenance have been enhanced. The most important points are:

- Updated: TransEdit manual (German and English).

Please note: Since the Scanner Window chapter of the TransEdit manual has been also restructured, the context-sensitive help resp. the new files TransEdit.chm and TransEditHelp.ini are not fully compatible with previeous TransEdit versions (and vice versa). So if you update to TransEdit 3.4, please also update the help files.

- Changed: Channel names in italic indicate that a scan result has been recognized in the DVBViewer channel list, but the assignment is uncertain, because the orbital position is missing the DVBViewer channel list data, thus possibly entailing the danger of mismatches across satellite positions resp. DVB networks.

If assignments are apparently correct, update the corresponding entries by using the "Add / Update" or "Update All" functions (see below). It will add the missing data in the DVBViewer channel list and enable an unambiguous assignment in future. The orbital position (as displayed in the TransEdit Main Window for satellite transponder lists) will play a major role for distinguishing DVB networks in future DVBViewer versions, so it's worth completing the channel list in this respect.

- Changed: All buttons affecting the scan results only are now grouped on the left side, all buttons affecting the DVBViewer channel list are grouped on the right side (above the Export Settings).

- Changed: The former "Send" and "Update" commands have been merged to "Add / Update". It works like this: Selected scan results that are not yet present in the DVBViewer channel list (grey or white background) are added. In case of scan results that are already present (light blue background, also partially) the corresponding entries in the DVBViewer channel list are updated.

- New: "Update All" button. Applies to all scan results that are already present in the DVBViewer channel list (light blue background, also partially). The corresponding entries in the DVBViewer channel list are updated.

- Added: Checkbox Settings -> Scanner 1 -> Update channel names in the DVBViewer channel list. Determines whether channel names in the DVBViewer channel list are updated according to scan results or not when using the Update Commands in the Scanner Window. Untick it if you prefer your own naming system.

- Changed: The former "Inactive Channels" function has been renamed to "Dead Channels", saying more clearly what it does. Reason: See next but one item.

- Changed: The OK and Cancel buttons in the Dead Channels Window have been replaced by a Close Button. The Delete button now removes the selected entries immediately from the DVBViewer channel list after prompting for confirmation.

- Added: Ability to detect (inactive) channels that are only listed in the SDT, not in the PAT/PMT (which means, there are no video and audio streams assigned to it).

- New: Filter option "Inactive Channels". Shows / hides scan results that are flagged as video/audio service, but are currently broadcasting no video and no audio stream.

This option enables finding channels that are temporarily inactive, e.g. some Sky Germany channels (former Premiere) on Astra 19° East or BBC THREE/FOUR resp. CBeebies/CBBC on Astra 28° East. Though no video/audio PID can be assigned to them while they are inactive you may export these scan results to the DVBViewer channel list. The DVBViewer channel auto update function (if switched on, see channel menu) will do the rest once these channels get active.

On the other side the "Inactive Channels" filter options can be used to hide a lot of junk, particularly data channels that are wrongly flagged as video/audio services.

- New: Delete DVBViewer Channels function (context menu only): Applies to selected scan results that are already present in the DVBViewer channel list (light blue background, also partially). Removes the corresponding entries from the DVBViewer channel list after prompting for confirmation.

- Changed: The Export to File function (former "Export") saves the selected scan results to a INI or CSV file (not as before all displayed scan results), thus being more flexible. However, now you have to additionally click „Select All“ if you want to export all scan results.

- Added: "Initial Letter" option in the Category Dropdown List: Lets TransEdit use the initial letters of the scan results as category name when exporting or adding scan results to the DVBViewer channel list.

Particularly useful on Astra 28° East if you don't want all channels to get piled up in a single BSkyB category folder. Hint: Let TransEdit sort the list of scan results alphabetically by channel name before exporting / adding channels with this new option. Click the "Name" column header.

- Enhanced: Method for recognizing scan results in the DVBViewer channel list. The list of scan results now shows more clearly (without ambiguity) which channels are already present.

- Removed: Settings -> Scanner 2 -> Same Channel Threshold input field. It's not necessary anymore to configure a "matching attributes" level.

Plese consult the TransEdit Manual if you want to know more details about the changes in the Scanner Window.

General changes:

- Fix: Several 120 dpi issues, several minor bugs.

- Updated: Transponder lists for Astra 19° East, Hotbird 13° East

- Added: Transponder list "Terrestrial (UK) Blind Scan" (Terrestrial_UK.ini). Designed for the blind scan capabilities of TransEdit. Please note: In its initial state this transponder list is not usable for scanning with DVBViewer.

http://www.dvbviewer.com/members/

ritschibie:
Danke, hatte ich noch gar nicht gesehen :embarassed:

Ist höchst willkommen, am WE steig ich auf 4.1.1 um! ;)

Navigation

[0] Themen-Index

[#] Nächste Seite