Autor Thema: SmartDVB 0.3.0 RC  (Gelesen 29678 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #150 am: 29 Dezember, 2012, 19:39 »
ok so i presume no special 'sb-page' url select's required (coz i see at specs that's also possible but cut b it's just not used much if at all).

Current build sent. The sosd ttx 'left/right' is by design (i altered that while ago to only be kb mapped through options, but again like with '0-9' digits exception cut b made here too ofcourse). I think it got messed up now again coz of focus issues (i'm quite sure if you force focus to the sosd ttx left/right would operate once more, if normal 0-9 digits operate now i could also like add same exception for left/right etc so that when sosd ttx's visible left/right etc goes to ttx first before processed by other osd elements)

'C' station kb's not removed coz it's by design to have remote access to station list (but could be prudent to have seperate station remote key for Sm*rtOSD 'nd old legacy OSD (to not operate them at same time?), same issue would occur with volume ctrl etc (might be prudent to create totally seperate sosd maps at kb/remote options).

There's also issue with kb at options wrt multiple defined kb shortcuts, this should not be allowed coz it could confuse people, i'll look to revise this somehow (so that when one adds already defined kb shortcut sdvb would compain).

TTX issue d*d* suggested should be corrected (normal lnks at ttx would not operate).

Also color remote 'red/green/etc' wrt Top-text should be like suggested now. I'm quite surprised it already seems to operate without hickups at first try. Also the blue should be light now, silly oversight.

br
JaCK

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #151 am: 29 Dezember, 2012, 21:00 »
second build with current date sent coz there's stupid oversight wrt Top-text url clk (oversight wrt red/green etc colour correct). So don't use first tst if not done so...

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #152 am: 29 Dezember, 2012, 22:58 »
@ Jack, mentioned issue fixed!
dada
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #153 am: 30 Dezember, 2012, 00:36 »
Oh well...

Now you seem to have mixed up the TOP-Text colour order.
May be I was not precise enough.
From left to right, it must be RED - GREEN - YELLOW - BLUE, as this is the standard order on all standard TV remotes.
To allow coordinating TOP-Text functions with the colour keys correctly, I have added two screen shots of the same page, a 100% correct one and latest SmartDVB TTX window attempt.
The correct one is approved by all my receivers and TV internal tuners.

It's not important, if line 24 button style links are displayed positive on a dark background (like FLOF normally shows) or negative on coloured background, or if button width was fixed at 1/4th of the line or depending on the text to be shown there.
But as users would not like to adapt to a new keyboard to screen relation, the order should in any case be according to common standards.
BTW, you can still see some small semi graphics errors on that SmartDVB displayed test page, taken from  Astra 19.2E 11496H "Das Erste HD". Same on both TTX versions.
Seems you have worked on TTX focus issues again.
An older issue returned now:
Left click onto an ordinary text sequence or empty area, acts as P+ now, on both TTX versions.
This should not happen.
A left click should only act on (all kinds of) TTX links, normally.

But if done by intention, a mouse function for P+ would need to have another one for P- along.
As there are still users around with no more than two mouse keys, from my point of view this does not really make sense.

Best regards

Jürgen
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #154 am: 30 Dezember, 2012, 20:58 »
ok lol :)
current built sent, had to attend to more urgent matters also :)

zdf etc txt coulours should be ok now, tx for the image, i've now altered it so that it looks like at that image also wrt mosaic colours (or so i hope then).

Yes the P-'s been added at purpose again, but i've removed it now again coz i agree it's not consistent with what people wud expect. Now you should  b able to use simply left/right etc mouse gestures like told before.

Also looked at the ´semi-graphs' issue, odd that those 199 tst ciphers look the same but seem to have small differences (coz i used such tst pages but there semi graphs looked different to that image you attached)..

br,
JaCK

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #155 am: 31 Dezember, 2012, 01:48 »
Again, quite some progress made  8)

Still some minor TOP-Text (only) mixup left:
Colours are fine now, and even the TOP typical negative design also is.
But the link title and target page of YELLOW and BLUE should be cross changed, to be fully identical with receivers and TVs.
This is for TOP-Text only, as on FLOF everything is OK already.

Displaying the target page number together with + or -, like '101+' or '899-'instead of 'P+' or 'P-', in fact is a good idea, as it transports more useful info  8)

Subs and page switching by cursor keys works fine now, on both TTX versions  8)

Mouse left click on plain text or empty area as P+ is removed now, THX.

I've never tried mouse gestures, as I don't even like the idea.
I prefer to ordinarily and precisely press / click on buttons, the direct and only logical way.
Never would I try to charm them instead, with careful girly style multiple finger tip wipes or any other magic gestures.
Nor would I like to draw a Gordian knot with some mystical gesture of the computer mouse, to hopefully convince the machine about my intentions...
Means, I don't like touch screens nor Wii controllers, nor to read from in between the lines.
Obviously I don't have a second X chromosome...  ;wusch

Happy New Year

Jürgen
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #156 am: 31 Dezember, 2012, 14:23 »
hmmm, i took a note from that image u sent nd hence thought it wud be ok (sport seemed at same place etc),
but well, i'll send current build (just .exe with this issue corrected, or so i hope once more).

I myself have never seen the need at actual fact for those cumbersome touch screen tablet like pc impersonators, i did see asus had some with built in kb, i guess i might be oldf*shioned then but i need to be able to type quick nd accurate coz that's what i'm used to too much, nd even then u spend like 31% of the time waiting on that stupid machine. I've seen people get them but then never take note of them once bought. Ofcourse for phone like func nd quick social media stuff it's ok, but not that much different like phone ofcourse, but without phone then :)..

Also other little issue altered wrt ttx titles (quick altering sb title pages would not refresh correct, like eg at that station u mentioned while back tele>i i noticed that, should operate better at that too i hope)...

br nd also good new year for all here (although with my current realisation nd treatment i had here at holland previous year (nd probably my entire life) i don't really mean that coz imho it's never been a good new year here for me considering the form of this society or what you might call a society, like mentioned before i feel nd am sure i'm like being persecuted for just being who i am 'nd now also for the realisation of this software,
like u mentioned even before media even totally ignores this here, 'nd ofcourse probably for a good reason :). Ofcourse i do mean it towards the people here who persevere with this too, but to all others here at holland who presist with silly colonial mentality i wish something else :)

anyhow enjoy the festivities u all!
br

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #157 am: 31 Dezember, 2012, 20:54 »
Fixes are fine, thanksalot  8)

Regarding the New Year ahead, just keep in mind, this relates with just one kalendar, the Gregorian one. Man made, not a part of the universe's internal structure.
In any case we have to take that New Year as it will turn out to be, except of perhaps the tiny little influence that might be in our own hands.

And if there's one thing I have learned throughout the years, it's far more important to prevent the world from changing you, than to change the world.
Keep in mind, most of the great dictators and slayers were non-smokers.
That's why I will not stop smoking...

Anyway, Happy New Year to everyone

Jürgen
 ;Feuer2
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #158 am: 31 Dezember, 2012, 23:02 »
Hello Jack,
do not let yourself impress too much by malvolents. It sems to me, there are, at least here, a fair number of friends and supporters who appreciate what you are achieving :)
Thanks for your efforts and HAPPY new year (and I mean that heartfully)
dada
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #159 am: 01 Januar, 2013, 12:00 »
+1
dada is right!

Happy new year!
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline yvmifi

  • VIP-Cubie
  • *****
  • Beiträge: 134
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #160 am: 02 Januar, 2013, 10:10 »
for me not work >>no under D: and no under C: !!! Tuning is ok but when I want to adjust the transmitter list of providers to only the Transmitter, then crash.????

Happy new year
Octagon SF3038 ;Formuler F1;XSPEED LX3;GIGABlu X1 >>alles mit openHDF 6.0 Beta
IntelCore PC E8400 3GHz:Gigabyte GA-P35-DS3;Windows7
Astra (19.2E)/Hotbird (13E) ASAT-9/8 Speedport SMART DSL50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #161 am: 02 Januar, 2013, 13:18 »
yvmifi: what version r u operating with? And which station list? (custom or old treeview?). Don't seem tb able to debug it (is it prv exe sent or install frm 3012?). Nd what exactly do you mean by frm provider to transmitter (transponder/frequency)?

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #162 am: 02 Januar, 2013, 13:26 »
cut u look at .exe data nd make sure u operate with .exe send 3112?
br nd happy  new year too ofcourse :)
edit: btw what OS u have exact (64 bit?)
« Letzte Änderung: 02 Januar, 2013, 13:37 von jackjavo »

Offline yvmifi

  • VIP-Cubie
  • *****
  • Beiträge: 134
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #163 am: 02 Januar, 2013, 14:53 »
@jackjavo
i have delete smartdvb.db and smarteit.db  >>> new transponderscan >>>>smartDvb newstart and it is ok !!!
my transponder list setting are ok now.
copy from C:\Programme  to D:\Fernsehprogramme is OK :jb

entcrypt with Hadu in Plugin is ok

install:51980102/sdvbtst2912-2 with 0.3.012 exe

yvmifi
Octagon SF3038 ;Formuler F1;XSPEED LX3;GIGABlu X1 >>alles mit openHDF 6.0 Beta
IntelCore PC E8400 3GHz:Gigabyte GA-P35-DS3;Windows7
Astra (19.2E)/Hotbird (13E) ASAT-9/8 Speedport SMART DSL50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #164 am: 05 Januar, 2013, 17:12 »
so no rprts recent times, does this mean no new issues been found nd the public version is nigh?
Epg might still need to be looked at coz i found some quirks there. I've added ttx sb title page select to
station properties now (like suggested before), other then that no major alterations for now ofcourse
Oh nd also there might be some addon issues (reports suggest probs with acamd, also that mdteletext exception at close does that also occur with other apps? Looked at that but looks like the addon simply errors at that?).
br