Autor Thema: Neue Linux-Treiber von AMD & Nvidia ...  (Gelesen 7356 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Legacy Display Driver 340.106
« Antwort #60 am: 18 Mai, 2018, 20:15 »
Whats new:>>

Fixed a compatibility problem between the nvidia.ko's Page Attribute Table (PAT) support and the kernel Page Table Isolation (PTI) patches.
To optimize stores to memory, nvidia.ko contains support for configuring the CPU's PAT registers, as a fallback for Linux kernels that predate kernel native PAT support. On any recent kernel with CONFIG_X86_PAT enabled, the driver will detect that setup has already been done and skip its PAT setup. However, a static inline function called by nvidia.ko's PAT fallback support was updated in the PTI patches to use the EXPORT_SYMBOL_GPL symbol 'cpu_tlbstate'. nvidia.ko was updated to only contain its PAT fallback support, at build time, on kernels without CONFIG_X86_PAT.

http://www.nvidia.com/object/unix.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 390.67
« Antwort #61 am: 07 Juni, 2018, 05:50 »
Changelog

Fixed a bug that could cause kernel panics when using Quadro SDI Capture hardware.
Fixed a bug that caused kwin OpenGL compositing to crash when launching certain OpenGL applications.
Fixed an intermittent crash when launching Vulkan applications.
Fixed an intermittent crash when launching applications through Wine.
Fixed a bug that caused the driver, in some low bandwidth DisplayPort configurations, to not implicitly enable display dithering. This resulted in visible banding.
Added support for X.Org xserver ABI 24 (xorg-server 1.20).
Improved nvidia-bug-report.sh to check for kern.log which is the default kernel log-file location for many Debian-based Linux distributions.
Fixed a bug which could cause X servers that export a Video Driver ABI earlier than 0.8 to crash when running X11 applications which call XRenderAddTraps().

[close]

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 396.54
« Antwort #62 am: 22 August, 2018, 18:45 »
Changelog

    Fixed a resource leak introduced in the 390 series of drivers that could lead to reduced performance after starting and stopping several OpenGL and/or Vulkan applications.

New in Nvidia Linux Display Driver 64-bit 396.45

    Improved recovery of Vulkan direct-to-display applications after an application hang or crash.
    Fixed a bug that could cause multi-threaded EGL applications to crash when exiting.

New in Nvidia Linux Display Driver 64-bit 390.77

    Improved compatibility with recent Linux kernels.
    Fixed an intermittent hang of Vulkan applications running fullscreen when flipping is allowed.
    Removed informational messages that were printed by nvidia-modeset.ko whenever a GPU device was allocated or freed.
    Fixed a bug that caused kwin OpenGL compositing to crash when launching certain OpenGL applications.

[close]

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 418.74
« Antwort #63 am: 10 Mai, 2019, 20:30 »
Whats new:>>

Updated nvidia-settings to allow continued interaction with other pages and help content while editing application profiles.
Added a new kernel module parameter, NVreg_RestrictProfilingToAdminUsers, to allow restricting the use of GPU performance counters to system administrators only.
Updated nvidia-installer for better compatibility with ncurses when libncurses.so.6 exposes the ncurses reentrant ABI, such as on openSUSE Leap 15 and SUSE Linux Enterprise 15.

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 430.34
« Antwort #64 am: 14 Juli, 2019, 09:15 »
Whats new:>>

    Added support for the following GPUs:

    GeForce RTX 2060 SUPER
    GeForce RTX 2070 SUPER
    Quadro RTX 4000 with Max-Q Design
    Quadro RTX 5000 with Max-Q Design

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 430.50
« Antwort #65 am: 15 September, 2019, 20:40 »
Whats new:>>

Fixed display color range handling on pre-Turing GPUs, such that when limited color range is selected through the display controls page in nvidia-settings, output pixel values will be correctly clamped to Consumer Technology Association (CTA) range.

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia OpenGL Display Driver 440.26 Beta
« Antwort #66 am: 19 Oktober, 2019, 20:40 »
Changelog

    Updated the confirmation dialog box that is displayed when quitting the nvidia-settings control panel to report when there are pending configuration changes which will be lost if they are not applied or saved before quitting.
    Enabled parallel GLSL shader linking by default; i.e., allow GL_ARB_parallel_shader_compile to work without first calling glMaxShaderCompilerThreadsARB().
    Added support for HDMI 2.1 variable refresh rate (VRR) G-SYNC Compatible monitors on supported GPUs.For more details, see "Configuring Multiple Display Devices on One X Screen" in the README.

    Added support for the GLX_NV_multigpu_context and GL_NV_gpu_multicast extensions.For more details, see the "Configuring SLI and Multi-GPU FrameRendering" chapter of the README, and the extension specifications:

https://www.khronos.org/registry/OpenGL/extensions/NV/GLX_NV_multigpu_context.txt https://www.khronos.org/registry/OpenGL/extensions/NV/NV_gpu_multicast.txt

    Fixed a bug that prevented Vulkan applications running on systems configured for SLI. Vulkan applications can now run while SLI is enabled; however, they will only be able to use a single GPU.
    Simplified the nvidia-sleep.sh sample script to no longer depend on unreliable detection of the current VT through X server logs.
    Added EGL support for PRIME render offload. Please see the PRIME Render Offload chapter in the README for configuration details.
    Fixed a regression introduced in 435.19.02 that would cause some applications which use the VK_KHR_DISPLAY extension to result in a segmentation fault.
    Enabled HardDPMS by default. See the README entry on the X configuration option "HardDPMS" for more information.

    Fixed a bug which caused corruption in the following DXVK titles:

    Saints Row IV
    Saints Row: The Third

    Added VP9 decode support to the NVIDIA VDPAU driver. See the VDPAU Support appendix in the README for supported VP9 decoder profiles.
    Fixed a bug that could cause heapUsage values reported by VK_EXT_memory_budget to not immediately update after vkFreeMemory was called.
    Changed GPU clock management strategy to more quickly ramp down clocks after a drop in GPU utilization.
    Added X configuration option, "SidebandSocketPath", which controls the directory in which the X driver will create a pathname UNIX domain socket used to communicate with the NVIDIA OpenGL, Vulkan and VDPAU driver components.
    The X driver will now create a fallback pathname UNIX domain socket in the directory specified by the "SidebandSocketPath" option, or /var/run by default, which will be used by other NVIDIA driver components if they are unable to connect to the default abstract socket.This fixes a bug where graphics applications run within a network namespace (which prevents the use of abstract sockets) were unable to take advantage of some driver features, such as G-Sync.
    Fall back to system memory when video memory is full for some driver-internal allocations. This can help fix Xid 13 and Xid 31 cases in Vulkan applications when video memory is full.
    Fixed a bug that could cause a blank screen on some DisplayPort monitors when logging in to GNOME, if the nvidia-drm kernel module parameter modeset=1 is specified.
    Fixed a bug that prevented NVIDIA GPUs from entering the low-power D3 state when entering suspend-to-idle (s2idle). Note that on some systems this may expose an existing timing issue in the Linux kernel; see the "Known Issues and Workarounds" section of the "Configuring Power Management Support" chapter of the README for more details.

[close]

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 440.31
« Antwort #67 am: 04 November, 2019, 20:20 »
Changelog

    Added support for the following GPUs:

    GeForce GTX 1660 SUPER

    Fixed a regression in the 440.26 driver that could prevent the NVIDIA kernel modules from building correctly on systems localized to a language other than English.
    Fixed a bug that could cause the X server to crash when running applications using GLX indirect rendering.
    Updated the Module.symvers sanity check, which is part of the NVIDIA kernel module build process, to accommodate the recent addition of a new field in the Module.symvers file format. This fixes the error "The Module.symvers file is missing [...]" seen during driver installation or DKMS rebuilds with Linux 5.4 RC kernels.
    Fixed kernel module build problems with Linux kernel 5.4.0 release candidates.
    Updated nvidia-bug-report.sh to collect information about X server crashes from coredumpctl, when available.
    Updated the nvidia-drm kernel module for compatibility with the removal of the DRIVER_PRIME flag in recent Linux kernel versions.
    Updated the confirmation dialog box that is displayed when quitting the nvidia-settings control panel to report when there are pending configuration changes which will be lost if they are not applied or saved before quitting.
    Enabled parallel GLSL shader linking by default; i.e., allow GL_ARB_parallel_shader_compile to work without first calling glMaxShaderCompilerThreadsARB().
    Added support for HDMI 2.1 variable refresh rate (VRR) G-SYNC Compatible monitors on supported GPUs.For more details, see "Configuring Multiple Display Devices on One X Screen" in the README.

    Added support for the GLX_NV_multigpu_context and GL_NV_gpu_multicast extensions.For more details, see the "Configuring SLI and Multi-GPU FrameRendering" chapter of the README, and the extension specifications:

    https://www.khronos.org/registry/OpenGL/extensions/NV/GLX_NV_multigpu_context.txt
    https://www.khronos.org/registry/OpenGL/extensions/NV/NV_gpu_multicast.txt

    Fixed a bug that prevented Vulkan applications running on systems configured for SLI. Vulkan applications can now run while SLI is enabled; however, they will only be able to use a single GPU.
    Simplified the nvidia-sleep.sh sample script to no longer depend on unreliable detection of the current VT through X server logs.
    Added EGL support for PRIME render offload. Please see the PRIME Render Offload chapter in the README for configuration details.
    Fixed a regression introduced in 435.19.02 that would cause some applications which use the VK_KHR_DISPLAY extension to result in a segmentation fault.
    Enabled HardDPMS by default. See the README entry on the X configuration option "HardDPMS" for more information.

    Fixed a bug which caused corruption in the following DXVK titles:

    Saints Row IV
    Saints Row: The Third

    Added VP9 decode support to the NVIDIA VDPAU driver. See the VDPAU Support appendix in the README for supported VP9 decoder profiles.
    Fixed a bug that could cause heapUsage values reported by VK_EXT_memory_budget to not immediately update after vkFreeMemory was called.
    Changed GPU clock management strategy to more quickly ramp down clocks after a drop in GPU utilization.
    Added X configuration option, "SidebandSocketPath", which controls the directory in which the X driver will create a pathname UNIX domain socket used to communicate with the NVIDIA OpenGL, Vulkan and VDPAU driver components.
    The X driver will now create a fallback pathname UNIX domain socket in the directory specified by the "SidebandSocketPath" option, or /var/run by default, which will be used by other NVIDIA driver components if they are unable to connect to the default abstract socket.This fixes a bug where graphics applications run within a network namespace (which prevents the use of abstract sockets) were unable to take advantage of some driver features, such as G-Sync.
    Fall back to system memory when video memory is full for some driver-internal allocations. This can help fix Xid 13 and Xid 31 cases in Vulkan applications when video memory is full.
    Fixed a bug that could cause a blank screen on some DisplayPort monitors when logging in to GNOME, if the nvidia-drm kernel module parameter modeset=1 is specified.
    Fixed a bug that prevented NVIDIA GPUs from entering the low-power D3 state when entering suspend-to-idle (s2idle). Note that on some systems this may expose an existing timing issue in the Linux kernel; see the "Known Issues and Workarounds" section of the "Configuring Power Management Support" chapter of the README for more details.

[close]

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 440.36
« Antwort #68 am: 23 November, 2019, 09:10 »
Whats new:>>

    Added support for the following GPUs:

    GeForce GTX 1650 SUPER
    Fixed graphical corruption that can occur when using glslang SPIR-V Generator Version

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Nvidia Linux Display Driver 440.44
« Antwort #69 am: 12 Dezember, 2019, 20:20 »
Changelog

    Added support for the following GPU:

    Quadro T2000 with Max-Q Design
    Added support for the __GL_SYNC_DISPLAY_DEVICE environment variable for Vulkan applications.
    Fixed a bug that caused applications running directly on a display (such as VR HMDs) to tear when a G-SYNC or G-SYNC Compatible monitor is plugged in the system.
    Fixed a bug in an error handling path that could cause a kernel crash while loading nvidia.ko.
    Fixed driver installation failure on Oracle Linux 7.7 systems, where the NVIDIA kernel module failed to build with error "unknown type name 'vm_fault_t'".

[close]

http://www.nvidia.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )