Autor Thema: SmartDVB 0.5.0.51 RC3  (Gelesen 5120 mal)

0 Mitglieder und 2 Gäste betrachten dieses Thema.

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.5.0.51 RC3
« Antwort #45 am: 08 Mai, 2017, 21:57 »
I forgot to mention this earlier. Smart of course does not even try to use the 64 bit LAV decoders. I tested UHD channels again a couple of times without arriving at a stable setup using intel Graphics 530. Also with DVBV there was no success in that respect.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Re: SmartDVB 0.5.0.51 RC3
« Antwort #46 am: 14 Mai, 2017, 17:19 »
Hi dada,
did you also try to record some UHD video in renderless mode and play it with MPC-HC x64 (not x86!) with DXVA2 switched off for HEVC internally (Optionen -> Interne Filter ! -> Video-Decoder -> Hardware Acceleration -> Codecs for HW Decoding -> HEVC off)?

I guess there is no x64 DVB software available at the moment, unfortunately. At least i don't know any.
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB