Autor Thema: DVBSky S950, DiSEqC 1.0: Suchlauf funktioniert nur mit LNB 1 (von 4)  (Gelesen 3178 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Hallo,

ich habe folgende Sat-Positionen (Frequenzlisten) bei SmartDVB eingestellt: (Florian BDA DVB-S Device -> Automatic Detection (geniatech); BDA tuning mode: Direct), (jeweils nur Diseqc 1 settings, KU-Linear (Universal))

19.2°E: LNB1 comitted
13.0°E: LNB2 comitted
28.2°E: LNB3 comitted
7.0°E: LNB4 comitted

Leider findet der Suchlauf nur für LNB1 so ziemlich alle Sender. Interessant ist, dass beim Suchlauf auf 13.0°E (LNB2) unter anderem der ARD-Transponder von 19.2°E gefunden wird (erkennbar an den Regional-Sendern), jedoch keine Hotbird-Sender. Anscheinend sucht SmartDVB nochmal auf LNB 1 (Astra 19.2°E) aber mit der Transponder-Liste für Hotbird 13.0°E. Habe ich da was falsch eingestellt? Wofür benutzt man eigentlich die Diseqc 2 settings?

Unter Mediaportal und dem DVBSky Player (OEM-Version DVBviewer) wurden alle LNBs korrekt abgesucht. Ich würde aber lieber SmartDVB benutzen.

Gruß
Joutungwu
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Es sieht ganz danach aus, dass die Device-Einstellungen noch nicht zum Tuner passen.
Vielleicht ist Geniatech bei Dir nicht passend.
Würde dann immer noch daran liegen, dass Microsoft bei der Definition von BDA leider nicht an DiSEqC gedacht hat und daher allerlei hardwarespezifische Patches nötig wurden.

Da ich nicht den gleichen Tuner habe, kann ich da leider nicht detailliert weiter helfen.

Aber was ganz genau meinst du mit "Diseqc 2 settings"?

S2 settings kenne ich, die dienen zur Umschaltung auf DVB-S2 Transponder, mit ihrer speziellen Modulationsform.
Hat aber eigentlich mit DiSEqC nix zu tun.

DiSEqC 2.0 settings finde ich gar nicht, aber die bräuchte man auch nur bei Verwendung von DiSEqC 2.0 LNBs oder Schaltern.
Und natürlich nur, wenn man einen der noch extrem seltenen DiSEqC 2.0 tauglichen Tuner verwendete.
Nur dann wäre nämlich die entscheidende Eigenschaft von DiSEqC 2.x nutzbar, bidirektionale Kommunikation für Plug&Play.
Und bisher hat kein mir bekannter Tuner die nötige Hardware zum Lesen von DiSEqC 2.x Device Antworten verbaut. 

Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Hallo,

Ich hoffe sie konnen english lesen :). Unterstutzung fur dvbsky/benustar isn't noch nicht implementiert. Aber hier konnen sie ein test bda.dev finden met DVBSky diseqc unterstutzung (beta).

http://www.smartdvb.net/bb/viewtopic.php?f=13&t=407.

Es ist von ein dvbky nutzer getestet...

Best would be to run the current 0.3.5 beta builds, but it should also work with 0.3.0 if you're using that (let me know if you have issues with that)..

br,
jack

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Zitat
Es sieht ganz danach aus, dass die Device-Einstellungen noch nicht zum Tuner passen.
Vielleicht ist Geniatech bei Dir nicht passend.
Würde dann immer noch daran liegen, dass Microsoft bei der Definition von BDA leider nicht an DiSEqC gedacht hat und daher allerlei hardwarespezifische Patches nötig wurden.

Thanks Jürgen! This leaded me to a solution: I looked at linuxtv.org which other card matches best to my hardware (Tuner, Demodulator, PCIe Bridge). Firstly, that wasn't successful. Than i played try and error with the Device types. I found out that the device type "TBS" seems to work perfectly for the DVBSky S950. Now i'm able to scan all of my 4 Sat-positions and tune to all channels successfully.  :jb

Here is my configuration of SmartDVB:

Selected Device: Florian BDA Device bda.dev 0.4.0 -> Professional DVB Digital TV DVBS2

Device Settings (Florian BDA settings)
--------------------------------------
Device Type: TBS
8PSK mode: 8PSK
BDA tuning mode: Direct (This is important, because standard tuning doesn't work for the s950)
Rest of settings: untouched

Zitat
Aber was ganz genau meinst du mit "Diseqc 2 settings"?

I meant the satellite settings for configured frequency lists. There you can find "Diseqc 1 settings", which i have configured (Commited LNB (1-4)) and underneath "Diseqc 2 settings", which i left untouched. I would like to know why there are these "Diseqc 2 settings". They have the same options as "Diseqc 1 settings".

Thank you, jackjavo, for your great work!  ;Beifall :jo

Best regards
Joutungwu

PS: Actually i bought a Mystique Sky Xpress V2 DVB-S/S2 PCIe card, but this seems to be only a label from the dvbshop. It's 100 % identical to the DVBSky S950! The DVbSky logo and the designation S950 can be found on the card.
Sorry, for my poor english.
« Letzte Änderung: 19 Oktober, 2013, 18:10 von Joutungwu »
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Hello again,

Your test bda.dev works as well with SmartDVB 0.3.0, jackjavo. Tuning and scaning with the s950 is no problem. I'll perform a full Sat-Scan next with that device, because my scans on different test Transponders seem to find more channels than with the old dvb.dev + TBS device type, but this is only an assumption. I'll check this later and let you know, if that is really the case. Update from NIT works also now (I didn't tested that with former bda.dev + TBS device type yet).

SmartDVB settings now:
Florian BDA Device bda.dev 0.2.0 (version number decreased?) ->  Professional DVB Digital TV DVBS2
--------------------------------------
Device Type: DVBSky/benustar
8PSK mode: 8PSK
BDA tuning mode: Direct
Rest of settings: untouched

 :jo

Joutungwu

PS: The native IR-remote of the S950 runs with the new bda.dev!    :borg  :jo
« Letzte Änderung: 20 Oktober, 2013, 01:18 von Joutungwu »
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
My assumption was wrong. I can find 2531 channels (TV/Radio/Data on 7.0°,13.0°,19.2°,28.2° E) with the old dvb.dev + TBS device type and 2526 channels with the new dvb.dev + DVBSky/benustar device type. There is no mentionable difference. I used the frequency lists from KingOfSat and added all available transponders from the other sources to scan a maximum number of frequencies.

But there is a big difference between the scans of SmartDVB and Mediaportal. The Mediaportal scan finds 4498 channels (TV/Radio on 7.0°,13.0°,19.2°,28.2° E).

Sorry, that was my mistake! "Show Scrambled Channels" was unchecked in the Channel List Properties. Now I have 5128 channels (TV/Radio/Data) in the channel list of SmartDVB.
« Letzte Änderung: 19 Oktober, 2013, 18:10 von Joutungwu »
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
ok good to know, you had me scared for a moment. Now you mention it it's not uncommon for people to make that mistake with the station filter settings, i'll think about a visual solution for that for the future so people realise better what's going on.

Interesting to know btw that the TBS device type works for you. Just out of curiosity, do the 'new tbs interfaces' also work for your device (there are some more interface checks there).

The numbering used to be 0.0.4 for the bda.dev versioning, so 0.2.0 should actually be newer (unless i made an error with some released bda.dev some time ago) :)

Btw just out of curiosity how does the number of stations found compare to MP without the data stations, is it about the same? It should about be for normal satelllite positions.

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Zitat
Just out of curiosity, do the 'new tbs interfaces' also work for your device (there are some more interface checks there).

Yes, it seems to run as good as the old TBS interface or the new DVBSky/benustar interface. There is no problem with scaning or tuning on my four satellite positions. But the native IR-remote works only with the DVBSky/benustar interface.


Zitat
Btw just out of curiosity how does the number of stations found compare to MP without the data stations, is it about the same? It should about be for normal satelllite positions.

The number of all TV/Radio stations found by SmartDVB is 4642. The Mediaportal scan found 4498 TV/Radio stations. I think this is quite equal in consideration of my attempt to maximize the number of transponder frequencies by combining all available sources in SmartDVB and the fact that the source of the updated transponder lists in Mediaportal is unknown to me. According to kingofsat lists there should be 4956 TV/Radio stations available. The difference here is probably caused by squinting LNBs and insufficient dish diameters. All in all enough stations were found ;D.
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
BTW, places like kingofsat usually list and count transponders of all beams of a satellite system.
As some beams can't be received from over here, e.g. due to pointing to Africa or Great Britiain only, those and the stations on there would not be found on a scan

And then some other transponders and stations may be active only temporarily but listed anyway.
Also there may be some double listings, due to old entries not being removed yet.
And some stations aren't active all day, possibly even missing place holders in the NIT then.

All together, the total sum of stations to be scanned may vary by time, location, dish size, tuner limitations on symbol rate range (e.g. for SCPC) and more.
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000