DVB-Cube <<< Das deutsche PC und DVB-Forum >>>

PC-Ecke => # Security Center => Software (PC-Sicherheit) => Thema gestartet von: SiLæncer am 28 Februar, 2012, 12:47

Titel: Videoüberwachungssoftware
Beitrag von: SiLæncer am 28 Februar, 2012, 12:47
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

- On detection send email with all possible combinations of Animated GIF, AVI and JPG attachments
- Added support for TP-Link IP cams
- Added a Delete Camera Folder(s) command in Tools menu
- USB and DV cams are now auto-reconnected when replugged

http://www.contaware.com/
Titel: ContaCam 3.9.7
Beitrag von: SiLæncer am 27 März, 2012, 22:00
Latest Changes

- Added support for MJPG and M420 capture device formats
- Moved Movement Detection mode selection box to bottom toolbar
- Moved Assistant from the Device Settings tabs to its own dialog box

http://www.contaware.com/
Titel: Xeoma Video Surveillance Software 12.4.13
Beitrag von: SiLæncer am 15 Mai, 2012, 18:45
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

http://felenasoft.com/
Titel: ContaCam 4.0.0
Beitrag von: SiLæncer am 16 Juni, 2012, 13:45
Whats new: >>

- Audio also for detection movies (both avi and swf files)
- It's now possible to set a relative sensibility for the single
  detection zones: set a percentage through the right-click
  context menu while in detection zones mode and then draw
- Within a day the detection movies are now tagged by a number:
  1 .. detection movies count
- Live De-Interlacing works now for all capture formats,
  no need for rec/det time De-Interlacing
- Fixed a bug in the web interface which prevented showing
  recs, detections and snapshots with the same timestamp
  (only one of them was shown)
- Introduced variables like %avi%, %gif%, %swf%, ...
  passed as parameters in command execution on detection end
- UDP networking lowered default fragment size from 1400 bytes
  to 512 bytes so that it works well for all network types

http://www.contaware.com/
Titel: iSpy 4.3.1.0
Beitrag von: SiLæncer am 22 Juni, 2012, 22:00
(http://www.heise.de/software/screenshots/t87798.jpg)
Verwandelt den Rechner in eine Überwachungszentrale und nutzt dabei angeschlossene Webcams und Mikrofone; erkennt unter anderem Bewegungen, zeichnet Tonsequenzen auf und lässt sich zeitgesteuert aktivieren; unterstützt den Betrieb mehrerer Kameras und erlaubt es, diese über iOS-, Android- oder Windows-Phone-7-Geräte zu steuern.

Freeware

http://www.ispyconnect.com/
Titel: ContaCam 4.0.1
Beitrag von: SiLæncer am 10 Juli, 2012, 18:00
Latest Changes

- Fixed uniqueness of temporary files
- Motion detection scheduler has now day of week check-boxes
- Allow a snapshot rate of 0 (choose Full Rate in Assistant Dialog) in which case the maximum possible rate is used. Usually that corresponds to the frame-rate, but if the hard-disk is slow it may be less

http://www.contaware.com/
Titel: ContaCam 4.0.3
Beitrag von: SiLæncer am 10 August, 2012, 21:00
Latest Changes

- Fixed uniqueness of temporary subdirectories
- ESC key always exits the program if set so in Global Settings
- Icons update

http://www.contaware.com/
Titel: ContaCam 4.0.5
Beitrag von: SiLæncer am 28 August, 2012, 22:00
Latest Changes

- In Movement Detection tab there is a new option to generate longer detection files so that most single detections are not split anymore into several movies
- The movement detection engine does now fast memory freeing when saving animated gifs
- Fixed crash when the detection pre-buffer is set too big with high resolution and high frame-rate cameras

http://www.contaware.com/
Titel: ContaCam 4.0.7
Beitrag von: SiLæncer am 05 November, 2012, 20:20
Latest Changes

- Fixed possible timezone problem's by getting browser's timezone and setting it in PHP
- The Other HTTP Device option of the Network dialog supports many more ip cameras and performs higher frame-rates because it first tries server push mode
- Device autostart is now not cleared when camera is unreachable (autostart can be removed in popping-up error message box)
- Motion detection emails include now the camera name
- Better Hotmail (Windows Live) email sending support

http://www.contaware.com/
Titel: ContaCam 4.1.0
Beitrag von: SiLæncer am 05 Dezember, 2012, 22:00
VERSION HISTORY

4.1.0 (December 4th 2012)

- In the web interface it is now possible to click on the live
  image to see it in fullscreen (to get this new feature run
  the Device Assistant for each camera)
- Closing the Device Settings dialog was not always storing
  the configurations to disk
- Fixes for HTTP requests, HTTP parser and HTTP authentication
- Fixed absolute URL issues with HTTPS servers
  (thanks to Cesare Gilardi for reporting the problem)
- Added Bulgarian web interface language
  (thanks to Mitko for doing the translation)

4.0.9 (November 11th 2012)

- On ContaCam start the unplugged WDM devices are now popping-up
  the new error message box which permits to clear autostart

http://www.contaware.com/
Titel: ContaCam 4.3.0
Beitrag von: SiLæncer am 14 Februar, 2013, 22:00
4.3.0 (February 12th 2013)

- Split the 'Other HTTP Device' mode in Server Push and Client Poll
- Swf snapshot history file is now correctly created even if
  restarting ContaCam (snapshots preceding restart are not lost)
- In Device Assistant added a button to move the camera folder;
  under Tools menu there is the possibility to move all camera
  folders in one command
- Live snapshot names can now be configured
- Increased support from 15 to 100 DirectX devices
- In log messages the user assigned device name is now shown
- For microapache set MaxKeepAliveRequests to 0 (=No Limit) to
  avoid frame jumps which were happening when the keep alive
  request count reached 0 and a reconnection was necessary
- Longer detection files option introduced in version 4.0.5
  is now always on
- Removed UDP networking because it was ContaCam's proprietary
  streaming protocol not compatible with any current standard
  (it's still possible to stream a video source through the web
  server, a FAQ entry has been added illustrating that)
- Removed manual record pause command which was of no use

http://www.contaware.com/
Titel: Xeoma Video Surveillance Software 13.3.22
Beitrag von: SiLæncer am 23 März, 2013, 09:24
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added easy updates straight from the program (Windows, Linux);
Added free rebranding utility for resellers and integrators;
Modified left panel in Quick Settings window.

http://felenasoft.com/
Titel: iSpy 4.9.0.0
Beitrag von: SiLæncer am 05 April, 2013, 17:40
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Added USB joystick support for PTZ control (see settings)
Added Grid View saving
Some minor code improvements
Removed automated youtube uploads (you can still upload on demand).

http://www.ispyconnect.com/

Titel: Xeoma Video Surveillance Software 13.4.5
Beitrag von: SiLæncer am 06 April, 2013, 20:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added possibility to specify user permissions;
Added easy updates straight from the program (Mac OS);
Added support for audio in more IP cameras;
Enhanced web server flash broadcasting.

http://felenasoft.com/
Titel: Xeoma Video Surveillance Software 13.4.19
Beitrag von: SiLæncer am 21 April, 2013, 18:00
Whats new: >>

Added Unitor module;
Sms sending: added bulksms.com service;
Enhanced work with rtsp cameras;
Added Fullscreen Mode for Windows;
Added PTZ inversion (image flip).

http://felenasoft.com/
Titel: iSpy 4.9.1.0
Beitrag von: SiLæncer am 22 April, 2013, 20:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fix for broken SMS functions (sorry!)
SMS can now take multiple numbers - separate them with a semi colon ";"
Fix for SlimDX errors on some systems.
Updates to the translations system.

http://www.ispyconnect.com/
Titel: iSpy 4.9.2.0
Beitrag von: SiLæncer am 23 April, 2013, 12:28


Whats new: >>

Fixed an issue with a corrupted config.xml file.

http://www.ispyconnect.com/
Titel: Netcam Studio 0.8.5.3 Beta
Beitrag von: SiLæncer am 29 April, 2013, 18:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

http://www.netcamstudio.com/
Titel: iSpy 4.9.5.0
Beitrag von: SiLæncer am 29 April, 2013, 19:00
Whats new: >>



http://www.ispyconnect.com/
Titel: Xeoma 13.4.30
Beitrag von: SiLæncer am 02 Mai, 2013, 06:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added group settings for modules;
Licensing policy revised: only video sources require licenses, Microphones can be used for free;
Added Italian localization.

http://felenasoft.com/
Titel: iSpy 4.9.8.0
Beitrag von: SiLæncer am 03 Mai, 2013, 20:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>



http://www.ispyconnect.com/
Titel: Netcam Studio 0.8.6.2
Beitrag von: SiLæncer am 07 Mai, 2013, 18:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

- Improved performances / Cpu Usage
- Rollback to .NET 4.0 (Support Windows XP, 2003)

http://www.netcamstudio.com/
Titel: iSpy 5.0.5.0
Beitrag von: SiLæncer am 13 Mai, 2013, 14:00
5.0.5.0   

Added Tray on Minimise switch to settings
Rewritten server component (uses thread pool)
Updates to data file processing (loading happens in background)
Layout changes to media panel
Fix for odd screen sizes in virtual PCs
Added File/Time remaining overlay for file sources using VLC
Added a file chooser for the VLC source type
Added option to ignore audio for video sources that include an audio component (to first tab when editing the camera)
Updated file management code - now deletes files to the 70% limit starting with the oldest files instead of everything over x days old
Added a new beta 64 bit version of iSpy (see the download page)

http://www.ispyconnect.com/
Titel: ContaCam 4.5.0
Beitrag von: SiLæncer am 16 Mai, 2013, 12:40
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

- Possibility for millisecond snapshot rates
- Delete old files if the free disk space gets lower than: MIN(10% of HD space, 10 GB)
- Added support for Foscam FI9821W, FI9801W and FI9802W (update Foscam firmware to the latest version!)
- Removed Capture
- Avi Play command because vlc can be used to stream a avi file to multipart/x-mixed-replace mjpeg

http://www.contaware.com/
Titel: iSpy 5.0.8.0
Beitrag von: SiLæncer am 18 Mai, 2013, 14:34
5.0.8.0   

Added pager to media panel
Added selection tool to media panel
A crashing bug fix (affected some systems)
Added a feature set controller to settings

 
5.0.7.0   

Fixed an issue with record on schedule start
Fixed some bugs with serving AVI files
Improved web interface to handle AVI downloads
Couple of other performance tweaks to the app interface

5.0.6.0   

Fixed an issue with the last update.

http://www.ispyconnect.com/
Titel: Xeoma 13.5.17
Beitrag von: SiLæncer am 19 Mai, 2013, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added support for Ubuntu 13.04;
Added selectable http port for PTZ cameras;
Added more IP cameras.

http://felenasoft.com/
Titel: iSpy 5.1.0.0
Beitrag von: SiLæncer am 23 Mai, 2013, 18:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fix for media panel checked item display
Better results when using the wizard to add IP cameras
Fixed the VLC plugin to detect lost connections and reconnect
Added a seek control to VLC file sources
VLC file sources now auto-disable at the end of the file playback

http://www.ispyconnect.com/
Titel: IP Camera Viewer 1.26
Beitrag von: SiLæncer am 28 Mai, 2013, 22:00
(http://www.deskshare.com/images/OverviewPages/ipcv/ComboPackshot-New.jpg)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/ip-camera-viewer.aspx
Titel: iSpy 5.1.2.0
Beitrag von: SiLæncer am 31 Mai, 2013, 17:01
5.1.2.0   

Reduced CPU load
Added support for depth and Infrared kinect streams
Streamlined video processing code
Fixed some layout issues (when adding new microphones)
Improved CPU reporting
Improved web status reporting

http://www.ispyconnect.com/
Titel: ContaCam 4.7.0
Beitrag von: SiLæncer am 31 Mai, 2013, 18:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

- Fixed the lost motion detection configuration zones bug seen when applying the Assistant Settings or when opening and closing ContaCam quickly

http://www.contaware.com/
Titel: iSpy 5.1.3.0
Beitrag von: SiLæncer am 04 Juni, 2013, 09:11
5.1.3.0   

Fixes for some issues with VLC reconnects after network outages
Updated motion zone definer/controller (drag to move and drag off to delete)
Fixes for some sync issues with webservices

http://www.ispyconnect.com/
Titel: Netcam Studio 0.8.8.0
Beitrag von: SiLæncer am 11 Juni, 2013, 17:30
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

- Support for RTSP / MPEG-4 Templates
- Improved User Interface
- New multi-view screen

http://www.netcamstudio.com/
Titel: Netcam Studio 0.9.0
Beitrag von: SiLæncer am 24 Juni, 2013, 18:01
Latest Changes

- Added support for 1500+ Network Cameras
- Improved and added settings for Motion Detection
- Uses the Brand / Model as default source name
- Several fixes

http://www.netcamstudio.com/
Titel: Netcam Studio 0.9.2.5
Beitrag von: SiLæncer am 03 Juli, 2013, 18:00
Latest Changes

- Software and Templates fixes
- Camera selection supports up to 64 sources
- Test Email / SMS configuration. HTTP Lan Scanner Tool
- Improved performances
- Allows to use manual address instead of template for connecting network cameras
- In case of connections issue with cameras (wrong credentials, timeout), the message is not sent back to the client as a picture anymore

http://www.netcamstudio.com/
Titel: iSpy 5.2.3.0
Beitrag von: SiLæncer am 05 Juli, 2013, 17:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Completely rewritten FFMPEG integration (latest build of FFMPEG) - supports more cameras, faster framerates.
Updated languages, sources and PTZ definitions.
Numerous minor bugfixes and optimisations.

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.3.2
Beitrag von: SiLæncer am 08 Juli, 2013, 17:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

- Multi-view allows to select main source
- Fixed resolution selection issue with some USB cameras
- Fixed audio support for Network Camera (broken since 0.9.2.5)
- Fixed Client could crash after disconnecting source
- Improved WebAPI

http://www.netcamstudio.com/
Titel: iSpy 5.2.4.0
Beitrag von: SiLæncer am 09 Juli, 2013, 12:27
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Added support for ONVIF cameras (discovery and video feeds)
If you have an ONVIF compatible DVR you may now be able to add it into iSpy
Fixed an issue with corrupted frames triggering motion detection
Fixed an issue with exceptions whilst using digital PTZ

http://www.ispyconnect.com/
Titel: Xeoma 13.7.4
Beitrag von: SiLæncer am 09 Juli, 2013, 23:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

- Enabled client-server connection when their versions differ
- Added forced fps change for client (applied only to preview)
- Enhanced work with H264 cameras: storing to the archive without re-encoding
- Motion detector: memory load reduced for pre-recording option
- Disabled autosearch if there are already cameras added
- Added Image Resize filter module

http://felenasoft.com/
Titel: iSpy 5.2.6.0
Beitrag von: SiLæncer am 11 Juli, 2013, 18:00
Whats new: >>

Fixed a bug with Windows XP installs

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.3.3 Beta
Beitrag von: SiLæncer am 11 Juli, 2013, 20:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

unbekannt

http://www.netcamstudio.com/
Titel: iSpy 5.2.7.0
Beitrag von: SiLæncer am 12 Juli, 2013, 16:20
5.2.7.0   

Fixes for some RTSP feeds with FFMPEG
Fixes for a couple of bugs with VLC feeds

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.3.4 Beta
Beitrag von: SiLæncer am 17 Juli, 2013, 19:00
Latest Changes

 - Fixed packaging related issues and pre-requisites checks. Also fixed Service version configuration files issues that were reported.
 - Possibility to select source number for multi-sources devices (Axis Qxxx, etc...).
 - Install / Uninstall service doesn't require to restart the the Console anymore to be updated.
 - Fixed Client stream may stop refreshing in full screen mode.

http://www.netcamstudio.com/
Titel: iSpy 5.2.9.0
Beitrag von: SiLæncer am 19 Juli, 2013, 19:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

updates to ffmpeg
updates to vlc
added IAM controls (for motorised USB cameras)
added Pelco P and D protocols with presets (experimental)
added onvif PTZ with presets (experimental)
added fractional second triggers for movement
fix for 1 second movement trigger triggering on half second
fix for circular triggers
fixed a bug when shutting down during recording
new default values (buffers)
updates to sources definitions and translations

http://www.ispyconnect.com/
Titel: iSpy 5.3.0.0
Beitrag von: SiLæncer am 20 Juli, 2013, 11:00
Whats new: >>

Fixed a dll link issue with ispyserver

http://www.ispyconnect.com/
Titel: iSpy 5.3.2.0
Beitrag von: SiLæncer am 23 Juli, 2013, 13:42
Whats new: >>

Fixed a memory leak in FFMPEG
Fixed an issue on recording with Windows XP (bug carried over from code change in FFMPEG)
Fixed an issue with mics paired with MJPEG sources not turning back on on reconnect of the video source.

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.4.0 Beta
Beitrag von: SiLæncer am 25 Juli, 2013, 20:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

Big improvement on performances when running Server and Client on same computer (uses shared memory instead of web server), fixed Netcam Web Client for Internet Explorer 10.

http://www.netcamstudio.com/
Titel: iSpy 5.3.4.0
Beitrag von: SiLæncer am 25 Juli, 2013, 21:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

fixed setting of movement interval
updated vlc audio source code
updated ffmpeg audio source code
added wizard url scanning and filtering
fixes for some ffmpeg issues (include deadlock)
fix for incorrect aspect ratio on web feed
updated so doesn't show when passed command through command API.
added full size video option to web interface

http://www.ispyconnect.com/
Titel: iSpy 5.3.6.0
Beitrag von: SiLæncer am 26 Juli, 2013, 13:00
Whats new: >>

Resolved an issue with disabling cameras via scheduling

http://www.ispyconnect.com/
Titel: Xeoma Video Surveillance Software 13.7.26
Beitrag von: SiLæncer am 27 Juli, 2013, 06:30
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Enhanced work with MJPEG/JPEG IP cameras;
Improved stability and crash protection (settings saving);
Enhanced Xeoma Android app (Android 2.3 support, more responsive sensor);
Improved direct recording of h264 stream into archive (and its further playback);
Perfected operation with a grand number of schemes (up to several thousands of cameras per 1 PC).

http://felenasoft.com/
Titel: iSpy 5.3.7.0
Beitrag von: SiLæncer am 29 Juli, 2013, 13:10
Whats new: >>

Fixed an issue with some ffmpeg based audio feeds.
Added functionality to support our latest MediaPortal plugin release (which now includes live streaming audio).

http://www.ispyconnect.com/
Titel: iSpy 5.3.8.0
Beitrag von: SiLæncer am 30 Juli, 2013, 16:00
Whats new: >>

Added multi cam jpeg feed for upcoming mediaportal plugin release
Fix for some issues people are having with recordings
Added name and id macros to argument field for alert triggers on cameras and microphones
Added RAM usage display to 64 bit iSpy
Added an RTSP mode switcher to FFMPEG options (if your video is glitching try setting this to TCP).
Added saving and restoring of extended properties of USB cameras - brightness, contrast, gain,saturation etc.

http://www.ispyconnect.com/
Titel: MicroDVR 2.0 Beta
Beitrag von: SiLæncer am 08 August, 2013, 23:29
(http://images.six.betanews.com/screenshots/scaled/1375989067-1.jpg)
MicroDVR is a simple application that allows the user to use available VideoCaptureDevices (Webcams) as security cameras. The interface allows the user to record the videocapture of a specific camera to a video file (.avi) to local storage (The recording path also can be set via the interface). The user can at anytime set the focus on any camera. For each camera, we can enable the Motion Detection, Beep on motion and Automatic recording on motion.

Open Source

https://sourceforge.net/projects/microdvr/
Titel: Xeoma Video Surveillance Software 13.8.12
Beitrag von: SiLæncer am 13 August, 2013, 13:34
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Enhanced camera search: now it is possible to add multiple cameras by simply specifying their URLs;
For Windows users: No limitations in quantity of archives;
Exit Detailed settings by pressing Esc button;
Improved Preview mode: new cameras now added horizontally;
Improved Preview mode: ability to change the order of preview images (drag and drop);
Elaborated user rights access: option added to restrict multiple access from 1 user profile.

http://felenasoft.com/
Titel: iSpy 5.4.2.0
Beitrag von: SiLæncer am 15 August, 2013, 14:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fixed bug with highlight setting of object tracking retained when app restarted
Fixed bug with overlay plugin not saving some settings
Added timestamp background and foreground colour options
Added a new Clone camera type - you can now clone your cameras and apply different motion detectors or overlays or FTP settings to each clone.
Fixed a bug with the face/numberplate plugins crashing
Updated to new version of FFMPEG and Accord frameworks
Fixed several auto reconnect issues for FFMPEG devices
Fixed several crashing scenarios for FFMPEG connected devices
Fixed auto reconnect for USB devices when they are unplugged.
Fixed AVI recording issue (invalid framerate)
Updated to new version of Twitter API for instant Twitter messages
Added download buttons to website file viewer
Fixed issue with alert on no movement triggering on schedule start
Added a confirmation dialog to save when loading new object lists
Added support for ONVIF PTZ for cameras that support continuous movement mode

http://www.ispyconnect.com/
Titel: iSpy 5.4.3.0
Beitrag von: SiLæncer am 17 August, 2013, 18:00
Whats new: >>

Fixed an issue with PTZ tracking
Fixed an issue with multiple reconnects whilst minimized

http://www.ispyconnect.com/
Titel: iSpy 5.4.4.0
Beitrag von: SiLæncer am 23 August, 2013, 17:00
Whats new: >>

Fixed an issue with interval reconnecting MJPEG feeds
Added an alert mode toggle option to command line and http interfaces
Fixed an issue with custom kinect source feeds
Added alert options for disconnect/ reconnect of web services to settings

http://www.ispyconnect.com/
Titel: IP Camera Viewer 1.30
Beitrag von: SiLæncer am 25 August, 2013, 07:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: iSpy 5.4.5.0
Beitrag von: SiLæncer am 27 August, 2013, 18:00
Whats new: >>

Added a startup mode option to settings - normal. minimised, maximised or full screen
Fixed an issue with ONVIF cameras with non-compliant PTZ support
Fixed an issue with corrupted frames breaking some image processing routines
Fixed several issues related to disk full scenarios

http://www.ispyconnect.com/
Titel: iSpy 5.4.6.0
Beitrag von: SiLæncer am 31 August, 2013, 14:00
Whats new: >>

Added FTP rename temp file mode (ispy can now upload a .tmp file and then rename it to the correct name on upload to minimise file interruptions when viewing live).
Added atomic storage controls to cameras and microphones (size/age)
Fixed an issue with unlisted cameras on the wizard
Fixed an issue with reconnecting MJPEG streams
Fixed an issue with FFMPEG writer error handling
Fixed an error scenario with object reference errors on recording paired microphones via ffmpeg.
Added customisable fonts for timestamp

http://www.ispyconnect.com/
Titel: iSpy 5.4.7.0
Beitrag von: SiLæncer am 02 September, 2013, 14:30
Whats new: >>

· Important fix for storage management - update if you are using 5.4.6.0
· Updated to restore to previous window layout by default
· Removed MMS alert option

http://www.ispyconnect.com/
Titel: iSpy 5.4.8.0
Beitrag von: SiLæncer am 04 September, 2013, 12:21
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new:>>

· Fixed issue with ONVIF PTZ loading (for cameras without PTZ)
· URL encoded usernames and passwords for wizard to enable connections to cameras with special characters in the credentials
· Fixed an issue with alerts trigger on completion of calibration
· Fixed an issue with email alerts when using some translation sets.

http://www.ispyconnect.com/
Titel: Xeoma Video Surveillance Software 13.9.3
Beitrag von: SiLæncer am 04 September, 2013, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Enhanced automated camera search;
Finnish localization is added;
User's cameras order saving is added (can be changed by an administrator only).

http://felenasoft.com/
Titel: iSpy 5.5.0.0
Beitrag von: SiLæncer am 24 September, 2013, 13:30
Whats new: >>

Fixes for some ffmpeg issues
Added context menu shortcut options for plugins
Some deeper integration options for plugins
Added ability to trigger motion detection and alerts from cameras with inbuilt detection (Axis)
Fixes for some threading/ concurrency issues

http://www.ispyconnect.com/
Titel: Xeoma Video Surveillance Software 13.9.30
Beitrag von: SiLæncer am 02 Oktober, 2013, 13:40
Whats new: >>

Archive interface remastered, new features added: motion events visualization on timeline, possibility to select date and time, playback speed, or timeline scale, or jump to the next/previous detected motion;
Layouts: added possibility to group cameras and view a certain group;
Layouts: added new layouts (2х1, 3х2);
Web server: added possibility to customize html pages;
Added auto switching to a higher quality stream in single camera view mode;
Install menu: added possibility to run user commands for server autostart (to mount NASs, etc.);
Group settings: added possibility to select/unselect all modules;
User rights: added possibility to allow/restrict access to archives;
Implemented clipboard (copy/paste) for Mac OS.

http://felenasoft.com/
Titel: Netcam Studio 0.9.5.0 Beta
Beitrag von: SiLæncer am 05 Oktober, 2013, 07:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

The RTSP Streams have been enhanced and audio support is becoming quite good. Most audio formats should be decoded properly now.
Fixed an issue in RTSP Streams resulting in wrong resolution. The motion detector is now grid based and offers better flexibility just like in webcamXP.
Added possibility to login / logout to another server within the windows client without having to exit the application.

http://www.netcamstudio.com/
Titel: iSpy 5.5.2.0
Beitrag von: SiLæncer am 08 Oktober, 2013, 18:00
Whats new: >>

Fix for some memory issues
New alert trigger type (external triggers)
Support for commercial plugins
New ANPR plugin (http://www.ispyconnect.com/userguide-alpr.aspx)
New version of FFMPEG
Fix for incorrect date display in media panel

http://www.ispyconnect.com/
Titel: iSpy 5.5.3.0
Beitrag von: SiLæncer am 11 Oktober, 2013, 14:00
Whats new: >>

Important fix for reconnection to ispy web services issue
Added support for multicam MJPEG feeds (implemented in the new mobile site)
Fixes for some potential memory leak issues
Mobile website updates

http://www.ispyconnect.com/
Titel: iSpy 5.5.4.0
Beitrag von: SiLæncer am 14 Oktober, 2013, 14:30
Whats new: >>

Fixed a memory leak with multi channel audio recording
Fixed a bug with live listening

http://www.ispyconnect.com/
Titel: iSpy 5.5.6.0
Beitrag von: SiLæncer am 15 Oktober, 2013, 12:23
Whats new: >>

Fixed an issue with ffmpeg recording
Pressing delete now removes the selected control
Added audio recordings to the media panel
Some UI tweaks

http://www.ispyconnect.com/
Titel: iSpy 5.5.8.0
Beitrag von: SiLæncer am 17 Oktober, 2013, 13:30
Whats new: >>

Fixed an issue with disconnection from web services
Added support for white-space usernames and passwords
Fixed saving of joystick settings
Fixed an issue with shutting down multiple cameras whilst recording

http://www.ispyconnect.com/
Titel: Xeoma Video Surveillance Software 13.11.8 Beta
Beitrag von: SiLæncer am 09 November, 2013, 07:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

unbekannt

http://felenasoft.com/
Titel: Netcam Studio 0.9.6.0
Beitrag von: SiLæncer am 09 November, 2013, 22:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

The RTSP filter should be close to final version, all major audio codecs are now supported properly (G711, G726, AAC). Several templates fixes. Improved performances. Possibility to open the stream with audio in VLC within the Netcam Studio Client.

Please note that only the 32-bit version supports RTSP Cameras and Streaming with audio.

http://www.netcamstudio.com/
Titel: iSpy 5.6.5.0
Beitrag von: SiLæncer am 13 November, 2013, 09:19
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new:>>

New alerts system with new alert types - network message, call URL, HTTP POST framegrab etc. Now supports multiple events per alert.
Fixed an issue with disconnection notifications
Resizable motion detection areas
Updated version of FFMPEG library
Performance improvements and bug fixes

http://www.ispyconnect.com/
Titel: iSpy 5.6.6.0
Beitrag von: SiLæncer am 15 November, 2013, 10:00
Whats new:>>

Fixed a bug with alerts
Updates to storage management logging
Fixed a bug with 2 cameras triggering recording on each other
Updates to ffmpeg flush code
See options on ispyconnect timeline tab for new desktop notifications (webkit browsers (chrome) only)

http://www.ispyconnect.com/
Titel: iSpy 5.6.7.0
Beitrag von: SiLæncer am 18 November, 2013, 12:28
Whats new:>>

Fix for an issue with the new nVLC plugin
Fix for an issue with disconnection alerts
Added new functionality for grid views - they're now editable,supports full screen, always on top, context menus, and monitor selection (thanks Van Le!)

http://www.ispyconnect.com/
Titel: ContaCam 4.9.0
Beitrag von: SiLæncer am 20 November, 2013, 22:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

- Added Internet Explorer 11 support
- Added support for ACTi and some newer Intellinet ip cams
- Global toolbar buttons for Browse and Browse Files commands
- Motion scheduler has got a 'detection disabled from..to and on'
- The minimum font size for frame time, for detection indicator
  and for detection save/email/ftp progress is now configurable
- Better support of OmniVision webcams
- Fixed memory leak for cameras producing sort of unusual MJPG
  frames (thanks to Mitko for sending me the Neo NC-78 webcam)
- Possibility to store temp files under the cameras root folder
- Command is now executed when detection is confirmed by filter
  and not on first movement frame
- First version especially optimized for Windows XP and higher
- Dropped support for theora encoding because many modern
  players are not able to play avi files encoded in such a way

http://www.contaware.com/
Titel: iSpy 5.6.8.0
Beitrag von: SiLæncer am 21 November, 2013, 12:24
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new:>>

Added multiple video transform options (rotate/flip)
Updates to disconnection alert system (supports different email addresses per object)
Added filter controls to the media panel
Updates to support group name options for the command line and http interface (specify a group to apply a command to instead of a specific object)

http://www.ispyconnect.com/
Titel: Xeoma 13.11.22
Beitrag von: SiLæncer am 27 November, 2013, 13:30
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Xeoma Cloud: added export of MJPEG extracts
Archive improvements: added proportional removing of all archives once the space limit is reached
Added Serbian and Greek localizations
Other minor improvements

http://felenasoft.com/
Titel: Xeoma 13.12.27
Beitrag von: SiLæncer am 29 Dezember, 2013, 07:00
Whats new: >>

Added new FTP receiver module;
Added archive export in MJPEG without re-encoding;
Xeoma Cloud: users can now add users and change passwords;
Added Czech localization.

http://felenasoft.com/
Titel: iSpy 5.7.4.0
Beitrag von: SiLæncer am 07 Januar, 2014, 13:29
Whats new:>>

Added new functionality to grid views (default camera and timeout settings for alert and motion monitoring mode)
Added Edit, Hold/Cycle and Next controls to grid view
Fixed several issues with disconnected media storage locations
Added write timeout code to ffmpeg (for disconnected media storage when writing video files)
Updates to PTZ code for passing authentication to some cameras
Fixes for some (rare) thread locking scenarios

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.7.5 Beta
Beitrag von: SiLæncer am 14 Januar, 2014, 19:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

unbekannt

http://www.netcamstudio.com/
Titel: Xeoma Beta 14.1.20
Beitrag von: SiLæncer am 29 Januar, 2014, 06:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added full support for CentOS (including autostart);
Xeoma for Android: added support for special symbols keyboard;
Marking module: added option to display GPS coordinates and speed (Windows, Linux);
Added possibility to choose a video input of a TV tuner (Windows).

http://felenasoft.com/
Titel: iSpy 5.7.9.0
Beitrag von: SiLæncer am 04 Februar, 2014, 17:00
Whats new:>>

Integrated common controls into the grid view
Added mic support into grid view
Fixed an issue with alerts/motion grid views
Pressing delete in the media panel now deletes media
Updated camera database
Added maximise to grid view (double click grid cell)
Added Fisheye correction option (see advanced video settings)
Fixed issue with mic alerts
Fixed issue with retention of storage management settings
Fixed an issue with the VLC plugin
Added an auto-off option to cameras to turn them off after a period of inactivity and a new alert action to turn cameras on.

http://www.ispyconnect.com/
Titel: iSpy 5.8.0.0
Beitrag von: SiLæncer am 05 Februar, 2014, 13:30
Whats new:>>

Added overlay controls to grid view for alerts and recent motion/sound mode
Added auto-hold for talk/listen commands in grid view
Added autolayout/minimise option
Fixed a bug with maximise sizing with paired controls

http://www.ispyconnect.com/
Titel: iSpy 5.8.2.0
Beitrag von: SiLæncer am 12 Februar, 2014, 12:22
Whats new:>>

Fixed a few issues with internal timers
Fixed an issue with mic alert modes when using multimedia streams
Added positional zoom controls for mouse wheel zooming
Updated ffmpeg libraries
Added plugins to settings (you can now install plugins without restarting ispy)
Added an option to delete associated media when removing cameras and microphones
Changed timelapse frames to save to the grabs directory
Better autogeneration of object names (no more duplicates)
Added an option to VLC feeds to use the GPU for H264 decoding (experimental - may actually result in worse performance depending on your graphics card)

http://www.ispyconnect.com/
Titel: Xeoma 14.2.11
Beitrag von: SiLæncer am 12 Februar, 2014, 22:00
Whats new: >>

Added support for MJPEG streamed through RTSP protocol;
Xeoma Cloud: possibility to restrict user(s) to use RTSP streaming and conversion of archives;
Added password protection of Main menu and Layout menu;
Added support for Zavio MJPEG cameras;
Added NV12 codec for USB cameras (Windows).

http://felenasoft.com/
Titel: iSpy 5.8.3.0
Beitrag von: SiLæncer am 18 Februar, 2014, 13:17
Whats new: >>

Added positional zoom control to grid view (mouse wheel)
Fixed a couple of issues with simultaneous use of ispy with grid views (object in use errors)
Added view files option to grid view
Added a free virtual webcam driver so you can use cameras you have running in ispy in skype and other applications (alpha release any problems with it please post in the forums)


http://www.ispyconnect.com/
Titel: Xeoma 14.2.18 Beta
Beitrag von: SiLæncer am 19 Februar, 2014, 06:00
Whats new: >>

Added support for MJPEG streamed through RTSP protocol;
Xeoma Cloud: possibility to restrict user(s) to use RTSP streaming and conversion of archives;
Added password protection of Main menu and Layout menu;
Added support for Zavio MJPEG cameras;
Added NV12 codec for USB cameras (Windows).

http://felenasoft.com/
Titel: iSpy 5.8.6.0
Beitrag von: SiLæncer am 22 Februar, 2014, 15:00
Whats new: >>

Added option to archive media to a separate folder
Added full alerting options for disconnect/ reconnect events (see alert tab when editing camera and microphone)
Fixed some timer related issues
Fixed issues related to time changes (summer/winter time zone changes)
Added support for fractional second grab/ FTP
Moved Email templates to settings (see the messaging tab in settings to modify the email templates)`
Added grid views to main menu bar
Fixed an issue with cloned video sources
Fixed an issue with grid views
Added archive option to context menu in media panel
Added archive command to web interface
Fixed playback sequence order in media player

http://www.ispyconnect.com/
Titel: iSpy 5.8.8.0
Beitrag von: SiLæncer am 26 Februar, 2014, 13:24
Whats new: >>

Display last frame instead of blank frame when reconnecting
Fixed an issue with timed motion detection alerts
Added password protection option to settings display
Added SMTP configuration option to settings
Hidden options that are denied due to current feature set in settings
Fixed a few issues with grid view
Added a new PTZ defniition
Updated translations
Added grid view options to main toolbar
Fixed an issue with closing some FFMPEG streams

http://www.ispyconnect.com/
Titel: iSpy 5.8.9.0
Beitrag von: SiLæncer am 27 Februar, 2014, 12:20
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Standardised display for mics and cams
Moved "connecting" text to bottom of frame
Fixed continuous pan issue when using Pelco
Fixed issue with PTZ scheduling
Fixed issue with enabling mics paired with cameras not being enabled on connection
Added some optional flags for rebrander application
Fixed issue with rebrander feature set flag overriding customisations
Stopped cameras/mics flashing if alerts are not enabled

http://www.ispyconnect.com/
Titel: iSpy 5.9.0.0
Beitrag von: SiLæncer am 28 Februar, 2014, 12:19
Whats new: >>

Added connecting notification to web vews when source is reconnecting
Fixed some memory issues related to grid view and remote viewing
Added option to archive instead of delete to storage management settings (global and object specific)
Changed "connecting" text to an icon (and moved it)

http://www.ispyconnect.com/
Titel: iSpy 5.9.2.0
Beitrag von: SiLæncer am 04 März, 2014, 17:00
Whats new: >>

Bug fixes related to FFMPEG streams
Added a virtual device manager for switching streams on the virtual webcam live without needing to use application settings (supports multi-view)
Removed the grid view options from the view menu and added a new grid view manager control to the toolbar
Some UI tweaks
Rolled back the FFMPEG library update (some reported instability with the latest update)
Fixed an issue with storage management
Improved responsiveness of FTP and Save Frames on motion detect code.

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.8.0 Beta
Beitrag von: SiLæncer am 12 März, 2014, 12:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

Dependency has changed, it now requires Visual Studio C++ 2013 Redistributable.

http://www.netcamstudio.com/
Titel: Xeoma Beta 14.3.14
Beitrag von: SiLæncer am 15 März, 2014, 10:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Improved the Cloud mode interface;
Improved audio playback quality on Windows and Linux;
Improved compatibility with the D-Link DCS-3010 camera.

http://felenasoft.com/
Titel: iSpy 5.9.3.0
Beitrag von: SiLæncer am 15 März, 2014, 15:00
Whats new: >>

Moved save frames to it's own tab
Added minimum interval to FTP and save frames
Added support for using SSL certificates (see settings)
Updated translations
Added new icons for all views
Added grid view to context menu
Added talk option "Local Playback" for remote talk and text via the browser
Improvements to FFMPEG UDP streaming
Made TCP the default option for FFMPEG
Fixed a hang issue with the IP camera scanner
Add maximise object option to context menu
Fixed a thread leak issue with the VLC plugin

http://www.ispyconnect.com/
Titel: ContaCam 4.9.5
Beitrag von: SiLæncer am 25 März, 2014, 20:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

Support Foscam, Tenvis and Clones mjpeg cameras in network dialog
Credentials are now typed into the 'Connect To' network dialog making it possible to edit them later on
Avoid leading and trailing whitespaces in directx device names
Fixed 'Out of memory' error message when joining a huge amount of avi files (more than 100)
Verify HTTP/1.1 keep-alive support because some ip cams do not follow the specifications
Possibility to configure an autostart delay between network devices. Useful for wireless networks which tend to congest if all IP cams start at the same time
Increased network timeouts
Made mjpeg video decoder more fault tolerant
Fixed service installation failure when using a Windows 8
Microsoft Account (thanks to Paolo Seveso for reporting that)

http://www.contaware.com/
Titel: iSpy 5.9.4.0
Beitrag von: SiLæncer am 27 März, 2014, 18:00
Whats new: >>

Updated Icons
Fix for corrupted frames in some RTSP feeds
Added an open program switch on snapshot option to settings
Moved FTP servers to settings
Added dropbox and google drive cloud integration (fully automatic and manual upload options)

http://www.ispyconnect.com/
Titel: iSpy 5.9.5.0
Beitrag von: SiLæncer am 29 März, 2014, 16:00
Whats new: >>

Rolled back ffmpeg to a previous version that works with Windows XP
Dependency fixes
Updated to the full ,Net 4 framework to support new cloud features.

http://www.ispyconnect.com/
Titel: iSpy 5.9.8.0
Beitrag von: SiLæncer am 14 April, 2014, 09:11
Whats new: >>

Fixed:

Issue with image and FTP settiings
Recording duration bug
Internal timer updates
Refresh issue with grid views
More responsive recording

Added:

Dual ranger for audio alerts
Snapshot mode for local devices
Automatic image settings checkbox
Video/Audio file merger
H265 Decoder (new version of FFMPEG)
Alert groups and new alert suspension logic (suspend alerts based on group camera activity)

Removed:

VLC 64 bit - install VLC 64 bit manually for future versions of iSpy 64 bit

http://www.ispyconnect.com/
Titel: iSpy 5.9.9.0
Beitrag von: SiLæncer am 15 April, 2014, 12:29
Whats new: >>

Fixed an issue with cloud settings
Fixed an issue with FTP port settings

http://www.ispyconnect.com/
Titel: iSpy 6.0.0.0
Beitrag von: SiLæncer am 17 April, 2014, 16:00
Whats new: >>

Fixed a bug with max record time
Added version detection to VLC 64 bit code

http://www.ispyconnect.com/
Titel: iSpy 6.0.7.0
Beitrag von: SiLæncer am 25 April, 2014, 17:00
Whats new: >>

Added PTZ flip support to USB devices
Simplified PTZ interface
Reduced CPU load when using FFMPEG sources
Updates to VLC sources
Added an FTP test option
Fixed an issue with cloned cameras
Update to Filter options
Fixed an issue with playback of slow framerate recordings

http://www.ispyconnect.com/
Titel: iSpy 6.0.8.0
Beitrag von: SiLæncer am 25 April, 2014, 19:02
Whats new: >>

Fixed an issue with VLC

http://www.ispyconnect.com/
Titel: iSpy 6.0.9.0
Beitrag von: SiLæncer am 28 April, 2014, 12:30
Whats new: >>

Fixed an issue with youtube uploads
Fixed an issue with grid view FPS limiting
Added ability to add objects to grid view when overlays are disabled
Added alerts and schedule on/off options to context menu
Removed recording icon if camera is reconnecting
Added "Switch Off Object" option to alert actions
Updated PTZ and source database
Graphical tweaks to grid view

http://www.ispyconnect.com/
Titel: iSpy 6.1.0.0
Beitrag von: SiLæncer am 04 Mai, 2014, 11:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Added multiple Picture in Picture support (overlay video from multiple other cameras)
Added None to PTZ options (to disable)
Added support for ePTZ for Fisheye cameras (using digital PTZ controls)
Fixed an issue with the setup project creating a desktop shortcut when told not to.
Added alert option to play sound through camera speaker
Added referrer authentication to lock down embedded streams
Reverted FFMPEG due to continuing issues with the recent FFMPEG builds
Fixed a bug with grid view empty cells
Fixed an issue with cloned cameras when the source camera has a transform applied
Fixed a bug with color background modeling
Added a PTZ scheduler switch to context menu switch option
Fixed an issue with google drive authentication
Added grid view options to view menu
Fixed an issue with alerting on no motion when enabling the camera
Fixed several issues with updating and moving media directories
Added HTTP keep-alives

http://www.ispyconnect.com/
Titel: iSpy 6.1.1.0
Beitrag von: SiLæncer am 06 Mai, 2014, 17:00
Whats new: >>

Fixed an issue with aborted google drive authentication blocking the ispy application
Modified VLC code to enable install without restarting iSpy
Removed http keepalives due to problem with MJPEG streams generating protocol errors

http://www.ispyconnect.com/
Titel: iSpy 6.1.2.0
Beitrag von: SiLæncer am 09 Mai, 2014, 17:00
Whats new: >>

Updated motion processing to calculate change percentages based on zones
Fixed a bug with FTP not saving passive flag
Fixed a bug with maximum number of cameras in grid view capped at 36
Added support for multiple levels of permissions based on password (see permissions in settings)
Added lock option to file menu
Fixed a bug with photo mode on local devices
Fixed a potential issue with FFMPEG timeouts
Fixed several issues with VLC audio sources

http://www.ispyconnect.com/
Titel: iSpy 6.1.3.0
Beitrag von: SiLæncer am 10 Mai, 2014, 11:00
Whats new: >>

Fixed an issue with grid views

http://www.ispyconnect.com/
Titel: iSpy 6.1.9.0
Beitrag von: SiLæncer am 17 Mai, 2014, 10:30
Whats new: >>

Fixed a few issues with ffmpeg recording
Added microphone cloning
Added gain settings for finer control of motion and sound detection
Added creation of new log file on date change
Added minimum recording duration settings

http://www.ispyconnect.com/
Titel: Xeoma 14.5.19 Beta
Beitrag von: SiLæncer am 20 Mai, 2014, 06:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added new HTTP request sender module;
Added new HTTP switcher module;
Added browser view of archives;
Added new customization options to the rebranding utility;
Added ability to change layouts via configuration file.

http://felenasoft.com/
Titel: Xeoma 14.6.4
Beitrag von: SiLæncer am 05 Juni, 2014, 06:00
Whats new: >>

Added ONVIF detection of PTZ cameras;
Enhanced work with archive.

http://felenasoft.com/
Titel: iSpy 6.2.1.0
Beitrag von: SiLæncer am 17 Juni, 2014, 17:00
Whats new: >>

Fixed an issue with audio ispy server/ vlc feeds
potential fix for hang on shutdown with some audio sources

http://www.ispyconnect.com/
Titel: Xeoma 14.6.24 Beta
Beitrag von: SiLæncer am 25 Juni, 2014, 18:00
Whats new: >>

Universal camera module: added possibility to choose sound quality;
Added support for more PTZ cameras;
Enhanced work of Save to file, FTP upload and Email sending modules, and export from the archive.

http://felenasoft.com/
Titel: iSpy 6.2.2.0
Beitrag von: SiLæncer am 26 Juni, 2014, 13:04
Whats new: >>

Fixed an issue when adding video sources with audio embedded
Ignore key commands when multiple unrelated keys are pressed
Updated PTZ list

http://www.ispyconnect.com/
Titel: iSpy 6.2.3.0
Beitrag von: SiLæncer am 27 Juni, 2014, 20:00
Whats new: >>

Fixed a memory leak issue with reconnecting VLC streams
Fixed a potential memory issue with desktop streams

http://www.ispyconnect.com/
Titel: Xeoma 14.5.23
Beitrag von: SiLæncer am 28 Juni, 2014, 10:00
Whats new: >>

Universal camera module: added possibility to choose sound quality;
Added support for more PTZ cameras;
Enhanced work of Save to file, FTP upload and Email sending modules, and export from the archive.

http://felenasoft.com/
Titel: iSpy 6.2.4.0
Beitrag von: SiLæncer am 17 Juli, 2014, 12:16
Whats new: >>

Worked around an issue with VLC thread leaks
Fixed an issue with grid alert view

http://www.ispyconnect.com/
Titel: Xeoma 14.7.18
Beitrag von: SiLæncer am 29 Juli, 2014, 06:00
Whats new: >>

Added new smart search for cameras;
Added possibility to extend updates period with 50% discount;
Added Catalan localization.

http://felenasoft.com/
Titel: ContaCam 4.9.7
Beitrag von: SiLæncer am 26 August, 2014, 12:20
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

New camera delete toolbar button
Configurable maximum camera folder size (that's useful when recording to a cloud storage service with limited space)
Faster avi video recording
Web interface has gotten a button to hide date navigation and live preview so that detections can be watched better.
Hint: in your preferred browser press F11 to enter full-screen
Support NV12 and NV21 web camera formats
Renamed: Device Assistant -> Camera Basic Settings, Device Settings -> Camera Advanced Settings
Simplified video encoding settings by removing the bitrate parameter and dropped vorbis, flac and mp2 audio encoding support in installation folder there is a new MasterConfig.ini file which determines the configuration files location, the temporary folder location and whether to use the registry or an ini file

http://www.contaware.com/
Titel: Xeoma 14.9.22 Beta
Beitrag von: SiLæncer am 30 September, 2014, 17:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added the “No motion detection” option;
Added the new ”HTTP marking” filter and search by its tags in the archive;
Added sound in Xeoma's main window;
Added SD card synchronization for VIVOTEK cameras;
Added more group settings;
Rebranding utility: customized versions can now be run also in the trial edition;
Xeoma Pro: you can now hide modules, ready schemes, or restrict adding and deleting cameras;
Archive: motion events on the timescale are now precise to the seconds;
Added possibility to export an extract without re-encoding;
Added camera’s IP address macro;
Enhanced work of Xeoma Repeater and email sending module (attached pictures) when Internet speed is slow;
Added camera’s IP address macro;
Enhanced work of the Android app, the “Marking” module, sound quality, PTZ and various usability improvements;
Added Belorussian and Slovenian localizations.

http://felenasoft.com/
Titel: iSpy 6.2.5.0
Beitrag von: SiLæncer am 01 Oktober, 2014, 09:11
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

New version of FFMPEG
Swapped select button on UI
Fixed an issue with triggered recordings

http://www.ispyconnect.com/
Titel: ContaCam 4.9.9
Beitrag von: SiLæncer am 04 November, 2014, 19:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Latest Changes

- Possibility to configure Recording Segments of 15 min. and 30 min.
  (if upgrading please check/fix the recording segments under
  Camera Advanced Settings - General tab)
- In email configuration dialog it's now possible to setup a
  personalized subject line with insertion of variables
- Improved detection zones editing tool
- Dropped DirectX (IDirectDraw7) drawing support because it is
  obsolete and poses stability and in some cases even memory leaks
  problems on Windows 8/8.1
- Added unicode support to ContaCamService console
- Fixed NV12 and NV21 support for some video resolutions
- Licensed under GNU GENERAL PUBLIC LICENSE Version 3

http://www.contaware.com/
Titel: iSpy 6.2.6.0
Beitrag von: SiLæncer am 05 November, 2014, 13:07
Whats new: >>

Updates to VLC and FFMPEG plugin.
Fixes to enable hardware acceleration on VLC plugin for some feeds
Couple of minor bug fixes

http://www.ispyconnect.com/
Titel: Xeoma 14.10.24 Beta
Beitrag von: SiLæncer am 06 November, 2014, 06:00
Whats new: >>

Added possibility to move a license to another equipment;
Added saving clients' settings to different files;
Added option to restrict/allow export for users;
Archive: playback of H264 recordings made significantly faster.

http://felenasoft.com/
Titel: Xeoma 14.11.19
Beitrag von: SiLæncer am 23 November, 2014, 10:00
Whats new: >>

Added possibility to move a license to another equipment;
Added saving clients' settings to different files;
Added option to restrict/allow export for users;
Archive: playback of H264 recordings made significantly faster.

http://felenasoft.com/
Titel: iSpy 6.2.7.0
Beitrag von: SiLæncer am 28 November, 2014, 11:30
Whats new: >>

Added recording framerate settings to web settings html template
Fixed an issue where port scans can crash the server

http://www.ispyconnect.com/
Titel: iSpy 6.2.9.0
Beitrag von: SiLæncer am 10 Dezember, 2014, 12:24
Whats new: >>

Added additional alert event types (alert stopped, recording started, recording stopped)
Updates to some plugin related issues

http://www.ispyconnect.com/
Titel: iSpy 6.3.0.0
Beitrag von: SiLæncer am 19 Dezember, 2014, 11:00
Whats new: >>

Fixed an issue with motion range calculations
Fixed an issue with alert notifications
Added a "maximise and restore" option to alert grid views

http://www.ispyconnect.com/
Titel: Netcam Studio 0.9.9.2 Beta
Beitrag von: SiLæncer am 26 Dezember, 2014, 08:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Latest Changes

Caching users for better performances
Possibility to change source name
Possibility to reorder sources
Fixed reported issues in Client
Fixed Generated HTML only refreshing the first source
Fixed issues in 64-bit package
Use LibVLC for RTSP, MPEG-4 and ASF Streams if available (about 20% less cpu required)
Possibility to use RTSP sources in 64-bit version (Requires VLC 64-bit)

http://www.netcamstudio.com/
Titel: Xeoma 14.12.25 Beta
Beitrag von: SiLæncer am 02 Januar, 2015, 19:00
Whats new: >>

Added Device List: easy management of cameras and groups;
Added visualization of movement (motion tracking);
Archive player: added search for motion;
Archive player: added deletion of selected intervals;
Archive player: convenient fast jump to the end of the archive;
Added screenshot button (can be reduced to an option in the menu) for instant stills;
Added new "Image Rotate" filter module;
Users: added new levels of rights;
Added possibility to build more complicated schemes;
Enhanced interactive tips;
Added the Croatian localization.

http://felenasoft.com/
Titel: Xeoma 14.12.29 Beta
Beitrag von: SiLæncer am 06 Januar, 2015, 07:00
Whats new: >>

Archive player: added search for motion;
Added visualization of movement (motion tracking);
Added possibility to build more complicated schemes (connect several filters to the input pin of a following module);

http://felenasoft.com/
Titel: Xeoma 15.1.16 Beta
Beitrag von: SiLæncer am 23 Januar, 2015, 05:00
Whats new: >>

Archive player: added search for motion;
Added visualization of movement (motion tracking);
Added possibility to build more complicated schemes (connect several filters to the input pin of a following module);
Added Device List: easy management of cameras and groups;
Archive player: added deletion of selected intervals;
Archive player: convenient fast jump to the end of the archive;
Added screenshot button (can be reduced to an option in the menu) for instant stills;
Added new "Image Rotate" filter module;
Users: added new levels of rights;
Enhanced interactive tips;
Added the Croatian localization.

http://felenasoft.com/
Titel: iSpy 6.3.1.0
Beitrag von: SiLæncer am 19 Februar, 2015, 09:10
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Added fix for ptz zoom that requires stop command
Updated Norwegian translations
Updated FFMPEG library
FFMPEG optimisations
Fix for issue with alert grid view

http://www.ispyconnect.com/
Titel: Netcam Studio 1.0.5.0
Beitrag von: SiLæncer am 25 Februar, 2015, 05:30
Latest Changes

- Added Google Drive Synchronization
- Fixed Blob Motion Detection discarding some motion
- Added HTTPS Support in Smartphone Client / Web Client
- Added Support for localization (translations) in Smartphone Client
- Fixed Package when installing only Netcam Studio Client
- Reduced Motion Detection CPU usage by generating Motion Images / Result only when needed
- Fixed Permanent Token not generated when creating new users
- Fixed Free Space reporting C:\ driver instead of Library drive

http://www.netcamstudio.com/
Titel: Xeoma 15.2.25
Beitrag von: SiLæncer am 26 Februar, 2015, 06:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Archive player: added search for motion;
Added visualization of movement (motion tracking);
Added possibility to build more complicated schemes (connect several filters to the input pin of a following module);
Added Device List: easy management of cameras and groups;
Archive player: added deletion of selected intervals;
Archive player: convenient fast jump to the end of the archive;
Added screenshot button (can be reduced to an option in the menu) for instant stills;
Added new "Image Rotate" filter module;
Users: added new levels of rights;
Enhanced interactive tips;
Added the Croatian localization.

http://felenasoft.com/
Titel: iSpy 6.3.3.0
Beitrag von: SiLæncer am 03 März, 2015, 09:11
Whats new: >>

Updated version of FFMPEG
Fix for potential issues reconnecting to MJPEG streams
Added a "Reconnect Failed" action option
Tweaks for selecting media in the media pane

http://www.ispyconnect.com/
Titel: Netcam Studio 1.0.6.0
Beitrag von: SiLæncer am 05 März, 2015, 22:00
Latest Changes

New Network Camera Templates
Fixed Remote Image over HTTP for Overlay was broken
Possibility to disable PTZ
Added User Role for Controling Pan & Tilt
Possibility to set the default view to use on Startup
Fixed Server doesn't start when UNC path is used for the library
Fixed refuses to record some specific resolutions
Fixed possibility to use Mobile application with only the View Roles (Netcam Studio Mobile 3.1.0)
Support for Netcam Studio SmartCam (Beta coming soon)
NOTE: File with user accounts (Moonware.Security.xml) will be overwritten in this version since there are new roles and the previous file is not compatible!

http://www.netcamstudio.com/
Titel: iSpy 6.3.4.0
Beitrag von: SiLæncer am 18 März, 2015, 16:00
Whats new: >>

Updated youtube integration to latest API
Updated cloud integration
Encrypted passwords in XML store
Added upload to YouTube button
Added support for SFTP
Added binding options to webserver for better support with multiple NICs

http://www.ispyconnect.com/
Titel: Xeoma 15.3.30 Beta
Beitrag von: SiLæncer am 04 April, 2015, 11:00
Changelog
Added "Problems Detector" module;
Added digital zoom;
Added "PTZ Tracking" module to follow moving objects automatically;
Added Fisheye camera dewarping module;
Added support of H.265 cameras;
Added possibility of saving video in WEBM (VP8 and VP9) format;
Added "Relay Switch" module;
Added "HTTP receiver" and "HTTP upload to other Xeoma" modules;
Added enhanced settings for USB cameras (for Windows and Linux);
Motion detector: selectable detection method (comparison of adjacent frames or comparison to the accumulated background);
Added "Always on top" mode;
Added transparency mode;
Popup window module: added push notifications for Android;
Added possibility of changing text font in preview;
The terms of using Xeoma's trial version have been changed;
Added the Japanese localization.
[close]

http://felenasoft.com/
Titel: Xeoma 15.4.9 Beta
Beitrag von: SiLæncer am 11 April, 2015, 11:00
Changelog
Added "Problems Detector" module;
Added digital zoom;
Added "PTZ Tracking" module to follow moving objects automatically;
Added Fisheye camera dewarping module;
Added support of H.265 cameras;
Added possibility of saving video in WEBM (VP8 and VP9) format;
Added "Relay Switch" module;
Added "HTTP receiver" and "HTTP upload to other Xeoma" modules;
Added enhanced settings for USB cameras (for Windows and Linux);
Motion detector: selectable detection method (comparison of adjacent frames or comparison to the accumulated background);
Added "Always on top" mode;
Added transparency mode;
Popup window module: added push notifications for Android;
Added possibility of changing text font in preview;
The terms of using Xeoma's trial version have been changed;
Added the Japanese localization.
[close]

http://felenasoft.com/
Titel: iSpy 6.3.5.0
Beitrag von: SiLæncer am 17 April, 2015, 12:28
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

A few minor bug fixes
Updates for VLC
Fixes for some talk issues
Added audio, controls and talk support for IP Webcam (Android) application

http://www.ispyconnect.com/
Titel: iSpy 6.3.6.0
Beitrag von: SiLæncer am 21 April, 2015, 09:16
Whats new: >>

Fixed an issue with setting permissions for user access

http://www.ispyconnect.com/
Titel: iSpy 6.3.7.0
Beitrag von: SiLæncer am 21 April, 2015, 17:00
Whats new: >>

Fixed an issue with google drive/ youtube authorisation

http://www.ispyconnect.com/
Titel: Xeoma 15.5.7 Beta
Beitrag von: SiLæncer am 08 Mai, 2015, 06:00
Changelog
Added "Problems Detector" module;
Added digital zoom;
Added "PTZ Tracking" module to follow moving objects automatically;
Added Fisheye camera dewarping module;
Added support of H.265 cameras;
Added possibility of saving video in WEBM (VP8 and VP9) format;
Added "Relay Switch" module;
Added "HTTP receiver" and "HTTP upload to other Xeoma" modules;
Added enhanced settings for USB cameras (for Windows and Linux);
Motion detector: selectable detection method (comparison of adjacent frames or comparison to the accumulated background);
Added "Always on top" mode;
Added transparency mode;
Popup window module: added push notifications for Android;
Added possibility of changing text font in preview;
The terms of using Xeoma's trial version have been changed;
Added the Japanese localization.
[close]

http://felenasoft.com/
Titel: Netcam Studio 1.1.8.5
Beitrag von: SiLæncer am 16 Mai, 2015, 07:00
Latest Changes
1.1.8
Extended timeout for connecting using VLC from 15 seconds to 30 seconds
Allows forcing the protocol when using the internal decoder [may fix the artefacts]
Fixed Web Client Library Period selection

1.1.7
Fixed PTZ not displayed in multi-view (now available as option)
Possibility to use keyboard arrows + keys N/M to control PTZ
Fixed source reordering in wrong order when using more than 9 sources
Fixed Motion Detection area editing displays wrong preview when using Netcam Studio Client

1.1.6
Added possibility to switch back to VLC decoding in case of issues with the internal decoder

1.1.5
Fixed recording may be failing with some resolutions
Improved A/V decoding
[close]

http://www.netcamstudio.com/
Titel: ContaCam 5.0.0
Beitrag von: SiLæncer am 20 Mai, 2015, 09:11
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog
Goodbye Flash Video: .swf files have been replaced by .mp4 files which all modern browsers and smartphones can play
Goodbye Html Frames: web interface improved for mobile devices
Detection frames are now buffered also to HD and not only in RAM (this avoids splitting a detection sequence into many files)
Configurable minimum disk free space (works now also for network shares and symlinks)
In audio input dialog the correct entry is selected for devices having the same name
Installer adds now the Start Menu entry only for the Current User
Removed Fullscreen Browser as it cannot display HTML5 videos
To avoid troubles in service mode from now on it's not possible to associate files to ContaCam (please use FreeVimager for that)
Because of web server miss-configuration danger the possibility to move the individual camera folders in Camera Basic Settings dialog has been removed (advanced users can create junctions, symlinks or run a .bat script on detection to move/copy the video files to another location)
[close]

http://www.contaware.com/
Titel: Xeoma 15.5.26 Beta
Beitrag von: SiLæncer am 28 Mai, 2015, 06:00
Changelog
Added "Problems Detector" module;
Added digital zoom;
Added "PTZ Tracking" module to follow moving objects automatically;
Added Fisheye camera dewarping module;
Added support of H.265 cameras;
Added possibility of saving video in WEBM (VP8 and VP9) format;
Added "Relay Switch" module;
Added "HTTP receiver" and "HTTP upload to other Xeoma" modules;
Added enhanced settings for USB cameras (for Windows and Linux);
Motion detector: selectable detection method (comparison of adjacent frames or comparison to the accumulated background);
Added "Always on top" mode;
Added transparency mode;
Popup window module: added push notifications for Android;
Added possibility of changing text font in preview;
The terms of using Xeoma's trial version have been changed;
Added the Japanese localization.
[close]

http://felenasoft.com/
Titel: Xeoma 15.6.10
Beitrag von: SiLæncer am 24 Juni, 2015, 20:00
Whats new: >>

Changelog
Added "Problems Detector" module;
Added digital zoom;
Added "PTZ Tracking" module to follow moving objects automatically;
Added Fisheye camera dewarping module;
Added support of H.265 cameras;
Added possibility of saving video in WEBM (VP8 and VP9) format;
Added "Relay Switch" module;
Added "HTTP receiver" and "HTTP upload to other Xeoma" modules;
Added enhanced settings for USB cameras (for Windows and Linux);
Motion detector: selectable detection method (comparison of adjacent frames or comparison to the accumulated background);
Added "Always on top" mode;
Added transparency mode;
Popup window module: added push notifications for Android;
Added possibility of changing text font in preview;
The terms of using Xeoma's trial version have been changed;
Added the Japanese localization.
[close]

http://felenasoft.com/
Titel: Xeoma 15.6.26 Beta
Beitrag von: SiLæncer am 01 Juli, 2015, 05:00
Whats new: >>

Changelog
Xeoma Pro: Added new module "License plate recognition" (for Russian license plates);
Xeoma Pro: Added new module "RTSP Broadcasting";
Xeoma Pro: Added new module "Button Switcher" and pair button on the lower panel;
Xeoma Pro: Added automatic update of client parts;
Xeoma Pro: Added search by motion option to the archive viewer;
Xeoma Pro: Added PTZ control of cameras via browsers;
Xeoma Pro: Added sound alarm on clients as well;
Xeoma Pro: Added possibility to mark a piece of an archive as undeletable;
Xeoma Pro: Visualization of motion in the archive viewer;
Xeoma Pro Your Cloud: added sample script for automatic subscriptions control;
Xeoma Pro Your Cloud: added option to only connect those clients that have a certain key;
Xeoma Pro Your Cloud: added option to make some modules' settings Read-only;
Xeoma Pro Your Cloud: added option to make some modules undeletable;
Xeoma Pro Your Cloud: added the "Save to File" module;
Xeoma Cloud: added possibility to view remaining days of a subscription;
H.264 decoding accelerated significantly for up-to-date Intel-processors (Windows);
Added possibility to install Xeoma to a directory of choice;
Added support for work through proxy (set up in command line);
Problems Detector: added check of network resources (for example, modem);
Problems Detector: added longer intervals of checking;
Added new module "Visitors Count";
User profiles: added possibility to restrict deletion of archives;
User profiles: added possibility to change camera order;
Sending Email: added new macros;
Installation: added creation of just Xeoma Client shortcut;
Xeoma for Android: added launch of just client part by default;
Motion Detector: eliminated delay in updating live image due to pre-record;
Added IP address of the server to the window title;
Added possibility to view information on licenses in use (Main menu -> Information -> Active licenses);
Added possibility to view server's current time;
Marking: added bigger sizes;
Added more pre-record values;
Added possibility to save screenshot only onto the client side;
Improved work with cameras (remastered the 'Available cameras' list, and enhanced processing of entered data);
Enhanced export: added "Browse" button, and automatic addition of camera's name, date and time to the name of the file;
Customization utility: added address lines, enhanced order of commands;
Fixed issues with files becoming available only after the next file starts being recorded;
Fixed crashes under Windows;
Fixed CPU load spikes;
Fixed re-connection issues;
Fixed work in minimized state.
[close]

http://felenasoft.com/
Titel: Xeoma 15.6.29 Beta
Beitrag von: SiLæncer am 05 Juli, 2015, 18:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new:>>

Customization tool: possibility to create and use a server list file;
Customization tool: option to disable hiding lower panel;
Customization tool: option to disable all elements in the Help window that don't work without Internet connection.

http://felenasoft.com/
Titel: Xeoma 15.7.7 Beta
Beitrag von: SiLæncer am 11 Juli, 2015, 10:00
Whats new: >>

Improved conditions for Xeoma Pro licenses: unlimited counts of PRO modules can be connected to 1 camera;
Xeoma Pro: added history of detected license plates (license plates log);
Xeoma Pro: improved PTZ control in browsers;
Xeoma Pro Your Cloud: enhanced option to disable some export formats (enabled options without re-encoding);
Layouts: added option to disable motion track visualization;
Added generable csv reports into the Visitor Counter and ANPR modules;
Added block of switching to the free edition of Xeoma via remote connection;
Enhanced work with archives and export;
Fixed the Microphone module in Xeoma for Android;
Work with cameras: added Spyg Optima camera, enhanced sorting of found URL;
Fixed sending of empty or redundant messages in Email Sending;
Unitor: added a new scaling option;
Eliminated image refresh problems in Mozilla web browser.

http://felenasoft.com/
Titel: iSpy 6.3.9.0
Beitrag von: SiLæncer am 16 Juli, 2015, 12:16
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Updated version of FFMPEG
Fix for adding objects via http request

http://www.ispyconnect.com/
Titel: Xeoma 15.7.22 Beta
Beitrag von: SiLæncer am 24 Juli, 2015, 07:07
Whats new: >>

Added automatic update of the server part;
Added automatic notification about available new beta versions;
Problems Detector: archive's timescale now marks intervals when there was no recording because of camera issues (camera "freezes", etc.);
Universal Camera: improved setting of found URLs, added information of QuickSync, edited settings dialog;
Archive: improved work with undeletable intervals;
Xeoma Pro: improved displaying of recognized license plate;
Improvements in the "Sending Email" module's work;
Improved algorythm of motion detection;
Eliminated the problem of Xeoma installation and using mouse scroll on Linux;
Eliminated the problem with FPS changing slider bar;

http://felenasoft.com/
Titel: iSpy 6.4.0.0
Beitrag von: SiLæncer am 24 Juli, 2015, 17:00
Whats new: >>

Reverted the ffmpeg build
Minor updates to VLC

http://www.ispyconnect.com/
Titel: Xeoma 15.7.27 Beta
Beitrag von: SiLæncer am 03 August, 2015, 06:00
Whats new: >>

Problems Detector: the name of camera from the module "Preview and Archive" is added to log;
Improved work of multiserver mode;
The "Sending Email" module works even better now;
Improved work of the "Archive" module.

http://felenasoft.com/
Titel: Xeoma 15.8.7
Beitrag von: SiLæncer am 12 August, 2015, 11:00
Whats new: >>

User access rights: added saving of user's cameras order;
Enhanced Problems Detector: now it passes camera image on to following modules instead of blocking it;
Visitor counter: all modules of this type now save reports into one united csv report;
ANPR: fixed detection types;
ANPR: changed default detection type to "Detect any cars";
Fixed the issue with overlaying text in customized Xeoma;
Fixed transparency in Multiserver mode;
Fixed the AAC codec sound crash;
Fixed the issue with updates;
Fixed automatic adding of the built-in camera on Android during the search by IP/password.

http://felenasoft.com/
Titel: Xeoma 15.8.14 Beta
Beitrag von: SiLæncer am 19 August, 2015, 18:00
Whats new: >>

Xeoma Pro Your Cloud configs: added parameter that enables/disables CSV-reports saving;
Xeoma Pro Your Cloud: customized version of Xeoma now creates file with its customized name;
Users: options of cameras permissions can be ticked/unticked separetely now;
Web Server: fixed the issues with image refreshing;
Web Server: fixed the issue with switching to a single camera view;
Added possibilty to scan for cameras manually even if Xeoma was launched with the key -noscan;
Fixed the issue with ffserver when it's not fully downloaded;
Fixed the issue with sound after rebooting camera in its web interface.

http://felenasoft.com/
Titel: Xeoma 15.9.1 Beta
Beitrag von: SiLæncer am 05 September, 2015, 05:30
Whats new: >>

Universal Camera: added additional information to camera's settings. Now you can see camera's resolution, fps, bit rate and tips for optimization
Android: edited information about parameters
Archive: solved the issue with sound

http://felenasoft.com/
Titel: Xeoma 15.8.27
Beitrag von: SiLæncer am 06 September, 2015, 06:00
Whats new: >>

Added support of Falcon Eye cameras;
Solved offline activation issue;
IP cameras diagnostic is improved. Now you will be notified if some parameters have been set wrongly.
Motion Detector: solved the issue with false triggering when the module's connected after Scheduler.

http://felenasoft.com/
Titel: iSpy 6.4.2.0
Beitrag von: SiLæncer am 16 September, 2015, 09:17
Whats new: >>

Lots of code updates (c# v6 improvements)
New Wix based installer
Fixes for some issues with FFMPEG and VLC feeds

http://www.ispyconnect.com/
Titel: ContaCam 5.0.1
Beitrag von: SiLæncer am 05 Oktober, 2015, 20:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog
Web interface has a new html5 calendar picker (browser must support it)
Enhanced ContaCam service installation
Audio support for Axis ip cameras (thanks to Michi for sponsoring the development)
Disallow standby and hibernate when there are cameras running
To clean-up after a possible crash ContaCam deletes now its temporary folder content on startup
Web interface avoids switching IE to compatibility mode when opened with the computer's NetBIOS name
Full Vietnamese language support
[close]

http://www.contaware.com/
Titel: Xeoma 15.10.7
Beitrag von: SiLæncer am 14 Oktober, 2015, 05:00
Whats new: >>

Layouts: added new grids with bigger camera slots to place most important to, and possibility to place cameras there automatically when their motion detectors are triggered;
Layouts: added possibility to have a custom number of cameras in tabs;
Xeoma Lite: added customization possibility;
Xeoma Cloud: added support for MJPEG cameras that stream over RTSP;
Usability improved in Universal camera, Problem Detector, Web Server, activation dialog, user profiles;
Web server: fixed issues with customization and MJPEG link;
Xeoma Lite: fixed the issue with loss of settings after additional licenses are activated;
Fixed crashes on Android (when paste/copy menu appears or when the Sound Alarm module is used);
Fixed Fisheye Dewarping module for RTSP cameras;
Fixed multiserver issues when specified is wrong password.

http://felenasoft.com/
Titel: Xeoma 15.10.19 Beta
Beitrag von: SiLæncer am 21 Oktober, 2015, 06:00
Changelog
PRO: added e-Map to place cameras on a map of the location and keep track of them (see it in Layouts menu);
PRO: added simultaneous view of multiple archives;
PRO: added view of a camera’s archive right on the Multi Cameras View Screen (main screen where all cameras are shown);
PRO: added LDAP (user active directory) synchronization for more efficient system administration – one password for all services;
Security enhanced: passwords are now masked with asterisks;
Added quick selection of previously input server addresses in the Connection Dialog;
Repeater: added console command to activate and turn Repeater on;
Repeater: usability and tooltips enhanced;
Added option for 40 days retention period in the archive viewer;
Improved digital zoom: reset zoom to default when you exit the zoom mode;
Improved re-indexing in the archive viewer as it now launches re-indexing of all cameras at once;
Improved work with cameras, Problems Detector, and usability of the Installation Dialog;
Fixed the black screen bug for Win XP.
[close]

http://felenasoft.com/
Titel: Netcam Studio 1.2.5.0
Beitrag von: SiLæncer am 21 Oktober, 2015, 13:47
Whats new:>>

Fixed movies playback in web client (not working with some movies)
Fixed issues with overlay variables not refreshing
Fixed screen never going to sleep / power saving modes
Fixed Client to support Big Fonts / 125DPI display
Improved Library Cleanup

http://www.netcamstudio.com/
Titel: Xeoma 15.10.22 Beta
Beitrag von: SiLæncer am 27 Oktober, 2015, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

PRO: added Privacy Masking module that allows to dynamically blur areas in view of camera that you are not allowed to record;
Improved work of FTP Upload module with several cameras (Falcon Eye, Tenvis).

http://felenasoft.com/
Titel: Xeoma 15.10.26 Beta
Beitrag von: SiLæncer am 02 November, 2015, 20:00
Whats new: >>

eMap: added support for PNG and BMP formats of maps (in addition to the already supported JPG);
Improved visualization of which archive is now being played alongside cameras live previews;
Improved interface: now you can see options and modules available in other Xeoma editions;
Improved usability: once activated, automated update of the server is turned off;
Fixed installation issues ('Run as superuser failed' error on Raspbian and Debian);
Fixed bug of when Xeoma offered to repeat search for cameras although cameras were actually found.

http://felenasoft.com/
Titel: Xeoma 15.11.12
Beitrag von: SiLæncer am 14 November, 2015, 09:31
Whats new: >>

Added color distinction for cameras in the multiple archives view mode. Every camera's timeline is now of the same special color as its preview box frame;
Enhanced work with cameras: when new cameras are added, lower resolution URL is set for 'old' cameras. It helps reduce processor load;
Enhanced security: passwords are replaced with asterisks for more password boxes;
Improved installation of new versions of Xeoma;
Fixed the scrolling crash in the filters settings.

http://felenasoft.com/
Titel: ContaCam 5.0.3
Beitrag von: SiLæncer am 18 November, 2015, 18:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Whats new:>>

- Hard-disk info display
- Show/hide commands for Statusbar and Toolbars
- Fixed crash opening "ManyCam Virtual Webcam"
- Removed audio file playing support as there are better programs that
  can reproduce many more file types
- Fixed hearable ticks while saving Axis ip camera audio

http://www.contaware.com/
Titel: Xeoma 15.11.23 Beta
Beitrag von: SiLæncer am 28 November, 2015, 11:00
Changelog

Further modifications of the Free edition conditions: now it doesn’t offer features you wouldn’t need in a simple 2-cameras-installation to make it easier to use.

Full list of new Free edition’s features;

Enhanced pre-record: now you can set it to up to 10 minutes. This will come in handy if you need to have recordings for some time in advance before the motion event started;
Pre-record setting moved to the corresponding module’s settings (Preview and Archive, Save to File) so now you can set different pre-record time, for example, for Email Sending, Archive and Save to File connected to the same Motion Detector;
Email Sending: when connected after the Problems Detector, letters with media attachments now show what camera they come from;
Fixed installation false error message that client cannot connect to the server;
Fixed Motion Detector’s current sensitivity level issue.

[close]

http://felenasoft.com/
Titel: iSpy 6.4.7.0
Beitrag von: SiLæncer am 30 November, 2015, 09:18
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fixes for some PTZ issues,
New PTZ definitions,
New Wix based installer
Some UI updates/ grid view fixes
Added digest authentication support
Improved (full text search) add camera wizard

http://www.ispyconnect.com/
Titel: Xeoma 15.11.23 Final
Beitrag von: SiLæncer am 03 Dezember, 2015, 06:00
Whats new: >>

Further modifications of the Free edition conditions: now it doesn’t offer features you wouldn’t need in a simple 2-cameras-installation to make it easier to use. Full list of new Free edition’s features;
Enhanced pre-record: now you can set it to up to 10 minutes. This will come in handy if you need to have recordings for some time in advance before the motion event started;
Pre-record setting moved to the corresponding module’s settings (Preview and Archive, Save to File) so now you can set different pre-record time, for example, for Email Sending, Archive and Save to File connected to the same Motion Detector;
Email Sending: letters now show what camera they come from;
Fixed installation false error message that client cannot connect to the server;
Fixed Motion Detector’s current sensitivity level issue.

http://felenasoft.com/
Titel: Xeoma 15.12.3 Beta
Beitrag von: SiLæncer am 06 Dezember, 2015, 20:00
Whats new: >>

Free edition enhanced: up to 8 cameras (instead of previously available 2) can be used in the edition now! Switch to the Free edition via Main menu -> Information;
Archive: added automatic re-indexing after archive path is changed. Old recordings will be available in the Archive viewer automatically;
Enhanced full screen mode of viewing several archive at one time: lower panel is not shown then so you can enjoy truly full screen viewing;
Enhanced Problems Detector: if a problem appears and is resolved (or in reverse) only the last message of the two is shown;
Fixed Email Sending issue with sending emails even if a filter module is not in the “Skipping” mode;
Fixed issue with server start after program is updated (Linux).

http://felenasoft.com/
Titel: Xeoma 15.12.8 Beta
Beitrag von: SiLæncer am 13 Dezember, 2015, 07:30
Whats new: >>

Enhanced usability: when you turn off a camera manually in the settings, Xeoma will remind you of that showing this warning in camera’s preview box;
Object Detector: simplified tracking counter for moving objects (instead of long numbers like before);
Fixed stuttering of sound in “Another Xeoma” and Multi-server mode;
Fixed issue in “Save to File” of path not getting changed automatically when the type of stored files is changed;
Fixed issue with motion not being correctly detected on D-Link cameras;
Fixed freezing of client on Ubuntu during fast switching between Single camera and Multi-cameras modes.

http://felenasoft.com/
Titel: iSpy 6.4.8.0
Beitrag von: SiLæncer am 17 Dezember, 2015, 18:00
Whats new: >>

Added full support for new web platform
Fixed an issue wiith dropbox uploads
Updated scheduling system
Happy Christmas :)

http://www.ispyconnect.com/
Titel: iSpy 6.4.9.0
Beitrag von: SiLæncer am 21 Dezember, 2015, 13:00
Whats new: >>

Fixed an issue with controlling some PTZ cameras

http://www.ispyconnect.com/
Titel: iSpy 6.5.0.0
Beitrag von: SiLæncer am 28 Dezember, 2015, 18:00
Whats new: >>

Fixed an issue with GZip compression

http://www.ispyconnect.com/
Titel: Xeoma 15.12.30 Beta
Beitrag von: SiLæncer am 02 Januar, 2016, 19:00
Whats new: >>

Xeoma Pro Your Cloud: added option to restrict usage of the "Object Detector", "Face Detector", "Privacy Masking", "Fisheye Dewarping" modules (in addition to the previously supported restriction of "Unitor", "Image Resize", "Universal Camera", etc.);
Added hardware acceleration for NVidia CUDA video graphics card in addition to the previously supported embedded Intel ones (only for Windows). Now, when available, you can turn hardware acceleration on for your NVidia CUDA in the settings of the "Universal camera" module;
Added PTZ for Geovision sd220 camera;
Enhanced Web Server work in Firefox and Chrome, now Web Server’s direct MJPG link loads up in these browsers without errors.

http://felenasoft.com/
Titel: ContaCam 5.0.5
Beitrag von: SiLæncer am 09 Januar, 2016, 11:00
Whats new:>>

Added Dahua and Hikvision support
Made the web interface more mobile friendly - Malformed jpeg frames reaching ContaCam are now not stopping it from running (thanks to Mark P for reporting the problem and helping find the bug)
Added crash dump support and verbose diagnostic logging
If no attachment is selected the motion detection email is sent really fast (before it was only sent when the detection storing was done)
Configurable minimum time between motion detection email messages
Removed the possibility to email jpeg snapshots on motion detection as it rarely catches what's moving. The Small Video (animated gif) is by far better suited as it really shows the movement (if its size is too small then adjust that under Save Small Video - Thumbnail Size)

http://www.contaware.com/
Titel: iSpy 6.5.1.0
Beitrag von: SiLæncer am 22 Januar, 2016, 12:23
Whats new: >>

Fixed an issue with windows XP
Modified alerts to color the border instead of flash the background
Added an intelligent grid layout option
Added fill mode to cameras - fill the area or preserve aspect ratio of the video.

http://www.ispyconnect.com/
Titel: Netcam Studio 1.2.8.0
Beitrag von: SiLæncer am 23 Januar, 2016, 16:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Whats new:>>

z.Z. unbekannt

http://www.netcamstudio.com/
Titel: Xeoma 16.1.26 Beta
Beitrag von: SiLæncer am 27 Januar, 2016, 22:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Whats new: >>

Added possibility to use camera’s zoom independent of camera’s PTZ;
Fixed zoom mode;
Fixed bug with live view after installation;
Fixed bugs with archive in Multiserver mode;
Fixed bug with the Motion Detector’s option “Detect only absence of movement”;
Android: Fixed crashes connected to work with camera.

http://felenasoft.com/
Titel: Xeoma 16.2.4 Beta
Beitrag von: SiLæncer am 08 Februar, 2016, 06:00
Whats new: >>

Archive: added option to choose 400 GB value in archive’s maximum size setting;
Enhanced camera diagnostics: when rtsp URL is used for preview, you will get enhanced credentials diagnostics both in preview window and in settings dialog;
Fixed stuttering of sound in latest versions of the program;
Fixed crash with archive calendar;
Android app Xeoma Video Surveillance is now available from Google Play.

http://felenasoft.com/
Titel: Xeoma 16.2.8 Beta
Beitrag von: SiLæncer am 15 Februar, 2016, 06:15
Whats new: >>

Improved saving of recordings. Added buffering of data before saving onto disk;
Sending Email: Added preset configuration for Yandex mail;
Universal camera: added option to ignore camera’s audio stream if you don’t want to use it;
Fixed duplicating of keyboard symbols on slow computers.

http://felenasoft.com/
Titel: Netcam Studio 1.3.1.0
Beitrag von: SiLæncer am 19 Februar, 2016, 21:00
Whats new:>>

Fixed issues when playing recorded videos through the internal web server
Fixed cannot exit Netcam Studio if viewers are connected

http://www.netcamstudio.com/
Titel: Xeoma 16.2.19 Beta
Beitrag von: SiLæncer am 20 Februar, 2016, 21:48
Whats new: >>

Added support for remote control of Xeoma on Android TV with a remote control;
Universal camera: improved usability of the settings window;
Xeoma Pro: fixed export of an extract from the archive with re-encoding;
Fixed involuntary reset of settings in case server crashes.

http://felenasoft.com/
Titel: iSpy 6.5.2.0
Beitrag von: SiLæncer am 26 Februar, 2016, 09:18
Whats new: >>

Fix some threading issues
Fix an issue with scheduler
Added translations for website json objects
Fix some layout issues
Cleaned sources database
Added new PTZ definitions
Fixed an issue with update check

http://www.ispyconnect.com/
Titel: iSpy 6.5.3.0
Beitrag von: SiLæncer am 27 Februar, 2016, 11:30
Whats new: >>

Fix for an issue with the add camera wizard

http://www.ispyconnect.com/
Titel: Netcam Studio 1.3.2.0
Beitrag von: SiLæncer am 01 März, 2016, 12:21
Whats new:>>

Improved memory management
Added some checks in Blob detection to prevent memory issues
Fixed Authentication Token may grant access to undesired cameras
Fixed Onvif detection when using multiple cameras with the same hardware identifier
Fixed audio playback in Netcam Studio X with local / usb audio

http://www.netcamstudio.com/
Titel: Xeoma 16.3.1
Beitrag von: SiLæncer am 09 März, 2016, 22:00
Whats new: >>

Added support for FTP streaming from RVI-R16 DVR;
Added possibility to turn off Xeoma's automatic camera search if there is "_noscan" in the Xeoma's executable file's name;
Fixed playback of archives when hardware acceleration for CUDA is enabled;
Fixed issues with zoom when archive playback is paused;
Fixed occasional hanging of the client part of Xeoma on Mac OS X.

http://felenasoft.com/
Titel: Xeoma 16.3.17 Beta
Beitrag von: SiLæncer am 24 März, 2016, 18:00
Changelog

Added support for RTSP cameras in Xeoma for ARM;
Archive player: Added support for keyboard arrows. Pressing left/right arrows will move play slider 10 secs backward/forward;
Archive player: added possibility to stop search in selected areas by exiting the player or clicking on the search progress bar;
Added support for the Tab keyboard button for quick jump between fields;
Universal camera: more options added to Group settings section, including preferences for single camera view, archive storage and hardware acceleration;
Export from the archive: added warning if there is no sufficient free space on the server or the client for export of the selected extract;
Export from the archive: added warning if there are insufficient rights for export of the selected extract;
Fixed wrong modules’ name when logged in through LDAP;
Android: fixed search for motion in selected areas;
Fixed processor load peaks when email messages were dispatched.

[close]

http://felenasoft.com/
Titel: Xeoma 16.3.29 Beta
Beitrag von: SiLæncer am 31 März, 2016, 13:45
Whats new: >>

Added client part for ARM processor-based Linuxes;
Added Face Blur: now you can use the Privacy Masking module to blur objects detected by a preceding filter (like Face Detector) in the chain;
Added support for RTSP cameras on Xeoma server under Android;
Marking enhanced: added option to use image overlay (along with previously available date/time, text, or GPS coordinates waterstamp);
Added possibility to save only audio stream to archive without video stream;
Added Fullscreen mode for Xeoma on Linux (Layouts menu –> Window settings);
Enhanced archive settings: now you can see how much space in % is still free and available for Xeoma recordings;
Enhanced work with cameras – now there will be less freezes when working with large amounts of cameras.

http://felenasoft.com/
Titel: IP Camera Viewer 3.06
Beitrag von: SiLæncer am 01 April, 2016, 19:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: Xeoma 16.4.8 Beta
Beitrag von: SiLæncer am 09 April, 2016, 10:00
Whats new: >>

Optimized work of Xeoma's client part on Android;
Fixed the issue when Xeoma suddenly stopped recording video to archives;
Sending SMS: fixed sending SMS with the sms.ru option.

http://felenasoft.com/
Titel: ImWatcher 1.1
Beitrag von: SiLæncer am 19 April, 2016, 05:10
(http://images.six.betanews.com/screenshots/1445112615-1.png)
ImWatcher is a professional video surveillance system with support for multiple web cameras. It can monitor and record from many cameras simultaneously, and preview multiple cameras in a single window. Each camera has its own individual monitoring and recording settings. When motion is detected, it can record a video or take snapshots.

Freeware

Latest Changes

- Added support of IP-cameras
- Added support of dynamic on/off for webcams
- Added ability to write a message to the developers
- Improved settings saving

http://www.highmotionsoftware.com/products/imwatcher
Titel: Netcam Studio 1.3.5.0
Beitrag von: SiLæncer am 29 April, 2016, 09:12
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Whats new:>>

Improved and Fixed some issues in Sync Plugins (Dropbox, Google Drive, FTP)
Fixes related to running NCS on SSL/HTTPS
Fixed Height reported incorrectly in HTML Generator
Updated library for LPR (License plate recognition)
Possibility to select multiple countries for LPR
Fixed an issue of Client freezing for a few seconds when remote audio playback
Adjusted recording settings to lower CPU usage
New Network Cameras Templates

http://www.netcamstudio.com/
Titel: ContaCam 5.0.7
Beitrag von: SiLæncer am 09 Mai, 2016, 19:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog

Email alert when device unplugged or not reachable
Faster and more reliable FTP upload support
Web interface video play rate buttons: 0.25x and 1.0x
Web interface has now an optional trash / delete button
Bigger toolbar buttons
Added support for some Samsung cameras
Email settings auto-fill for most common smtp servers
Re-added the option to email a jpeg snapshot on motion detection (with respect to previous implementation it is sent really fast)
Removed the standby and hibernate disabling feature introduced with
version 5.0.1 because it also blocked entering these states manually

[close]

http://www.contaware.com/
Titel: Xeoma 16.5.18
Beitrag von: SiLæncer am 19 Mai, 2016, 05:30
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog
Added possibility to save backup of settings and restore them at your convenience (see Main menu –> Install –> Restore menu for Export, Import, Save, Reset options);
PRO: added possibility to export selected extracts from several archives at the same time;
PRO: added option to select what users the Pop-Up Window module will work for;
Users: added option to use individual order of cameras in preview for certain users on each computer;
Fixed occasional freezing of Xeoma when recording archives;
Fixed occasional failure to launch Xeoma server at computer boot;
Fixed memory leaks when working with USB camera and microphone (Windows);
Archive: fixed crash when exporting into the webm format;
Fixed crash on Raspberry devices when working with microphone;
Enhanced version of Xeoma for Android.
[close]

http://felenasoft.com/
Titel: Xeoma 16.5.27
Beitrag von: SiLæncer am 28 Mai, 2016, 06:30
Whats new: >>

Fixed bug with rtsp streams when updating to a new version;
Universal camera: optimized work with stream for direct saving into the archive.

http://felenasoft.com/
Titel: Netcam Studio 1.3.6.0
Beitrag von: SiLæncer am 05 Juni, 2016, 12:00
Changelog

Added support for AAC audio decoding
Improved audio decoding and resampling processes
Improved audio sync while recording
Fixed Users with limited access rights cannot view library content
Rewriting of the ONVIF detection module
Asynchronous ONVIF devices detection (Like the Lan and uPNP modules)
New recording mode (Background-encoding) in order to (hopefully) reduce CPU usage
Updated UI Library DevExpress to v14.1
Fixed an issue/limitation with high resolution streams in Netcam Studio Client
New Network Camera Templates

[close]

http://www.netcamstudio.com/
Titel: Xeoma 16.6.6
Beitrag von: SiLæncer am 14 Juni, 2016, 18:00
Whats new:>>

Fixed bug with rtsp streams when updating to a new version;
Universal camera: optimized work with stream for direct saving into the archive.

http://felenasoft.com/
Titel: ContaCam 5.0.9
Beitrag von: SiLæncer am 27 Juni, 2016, 12:27
Changelog

All detection frames are buffered to memory (or page file)
Full stretch the videos in web interface
Corrected FTP to first upload the full video/jpeg version and then the corresponding thumb. That's necessary because in web interface the thumbs point through a link to the full versions
Emailing files as plain attachments and not embedded in html as before because some email clients are not display embedded images properly
Do not fail when no DV media present

[close]

http://www.contaware.com/
Titel: iSpy 6.5.5.0
Beitrag von: SiLæncer am 29 Juni, 2016, 09:06
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Bug Fixes
Updates to grid view
Sources updated
Added Portugese

http://www.ispyconnect.com/
Titel: iSpy 6.5.6.0
Beitrag von: SiLæncer am 30 Juni, 2016, 09:09
Whats new: >>

Fixed an issue with GZip encoding (iSpyCentral compatibility)

http://www.ispyconnect.com/
Titel: iSpy 6.5.7.0
Beitrag von: SiLæncer am 11 Juli, 2016, 12:19
Whats new: >>

Update to fix an issue with storage management not running

http://www.ispyconnect.com/
Titel: Xeoma 16.7.18 Beta
Beitrag von: SiLæncer am 21 Juli, 2016, 12:19
Changelog

Xeoma Pro: added license plate recognition (ANPR module) for license plates from Europe, UK, USA, Australia, Singapore, South Korea, Kazakhstan;
Xeoma Pro: added Face Recognition. You can find this option in Face Detector module settings where you can train Xeoma to recognize a certain person using shots of them from archive or live stream;
Marking: watermark image now can be flexibly scaled (from 10% to full size of the original) to fit into the camera image in the most convenient way;
Users: added option to decode video on client or server for each user separately;
Multi-Server Mode: added possibility to add servers connected through Repeater as well;
Layouts: added options to stretch or fit camera image into preview boxes and thus get rid of black borders;
Added the ANPR and Face Detector modules to Mac OS X;
Added support for PTZ of Tenvis JPT-3815 camera;
Added support for EasyCap USB dongle device for connection of analog cameras to computer;
Added retention of selected font size for preview texts after restarts of server;
Motion Detector: added support for camera switches to the night mode and back, without false alarms;
Problems Detector: fixed false notification about RAM shortage on Linux;
Fixed freezing issue when installing Xeoma on Macs that have a USB camera connected;
Microphone: fixed issues with peripheral microphones occasionally not working on Linux;
Privacy Masking: fixed wrong zones of masking from detectors;
Android: fixed crash in Single Camera View mode;
Android: fixed startup crash on some Android devices;
Visitors Counter: fixed the Interval of counter resets option to work according to the specified interval;
Fixed Screen Capture issues in installed Xeoma on Windows.

[close]

http://felenasoft.com/
Titel: iSpy 6.5.8.0
Beitrag von: SiLæncer am 29 Juli, 2016, 12:09
Whats new: >>

Fixed an issue with dropbox

http://www.ispyconnect.com/
Titel: Xeoma 16.8.17 Beta
Beitrag von: SiLæncer am 18 August, 2016, 19:00
Whats new:>>

Fixed memory leak under Windows;
Fixed issue with recording stopping after restart (for large archives).

http://felenasoft.com/
Titel: ImWatcher 1.2
Beitrag von: SiLæncer am 24 August, 2016, 18:00
(http://images.six.betanews.com/screenshots/1445112615-1.png)
ImWatcher is a professional video surveillance system with support for multiple web cameras. It can monitor and record from many cameras simultaneously, and preview multiple cameras in a single window. Each camera has its own individual monitoring and recording settings. When motion is detected, it can record a video or take snapshots.

Latest Changes

- Added hardware acceleration for video recording (Intel QSV, NVENC, AMD VCE)
- Added Greek translation
- Added the ability to check for a new version
- Now the program run in 30 day free trial by default
- Many minor fixes and improvements

http://www.highmotionsoftware.com/products/imwatcher
Titel: ContaCam 5.1.0
Beitrag von: SiLæncer am 21 September, 2016, 12:34
Changelog

Made the application High DPI Aware (displays well on 4K monitors)
Generates smaller mp4 files with the same quality
Added the possibility to send a daily email notification to make sure the device works properly
Increased the mailer timeout from 5 to 15 seconds (thanks to Joe
Hannigan for reporting a problem with some slow smtp servers)
Fixed email sending on Windows XP (thanks David Greig)
Encrypted settings (like passwords) are now exportable and work well if used on another computer or by another logon user
Compiling with Visual Studio 2015 (ContaCam runs on Windows XP SP3 / Windows Server 2003 SP2 or higher)

[close]

http://www.contaware.com/
Titel: ImWatcher 1.3
Beitrag von: SiLæncer am 29 September, 2016, 19:00
(http://images.six.betanews.com/screenshots/1445112615-1.png)
ImWatcher is a professional video surveillance system with support for multiple web cameras. It can monitor and record from many cameras simultaneously, and preview multiple cameras in a single window. Each camera has its own individual monitoring and recording settings. When motion is detected, it can record a video or take snapshots.

Latest Changes

- Added RTMP protocol support for IP-cameras
- Added drawing timestamps for the shapshots
- Added the ability to start/stop monitoring for individual camera
- Some changes in thumbnails painting

http://www.highmotionsoftware.com/products/imwatcher
Titel: Xeoma 16.10.24 Beta
Beitrag von: SiLæncer am 26 Oktober, 2016, 18:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

PRO: Added Detector of abandoned objects. It can be used to look for unwanted vehicles, or objects in an area such as for example restricted territory or railway station;
PRO: Added Smoke Detector. It will help you automatically detect if there’s a fire or smoke in the camera’s field of view;
PRO: Added heat map. Now you can quickly review where the most of motion occurs (for example, in a shop). See this feature in Archive menu –> Heat map;
Xeoma Pro Your Cloud mode can now be launched from Xeoma UI. Create your own Video Surveillance as a Service system;
PRO: Added multilayer eMap. Now you can have several maps to put your cameras on, and switch between them in a single click;
PRO: In the ANPR module you can now use your own third-party utility for license plate recognition, and choose where to store the suggested OpenAlpr utility. Click here to learn about setup;
PRO: HTTP Marking can now be seen in live-view windows, as well as searched for in the archive with the ID;
Added new type of licenses will help you upgrade your Xeoma Standard licenses to Xeoma Pro licenses;
Added TLS secure connection between client and server. See instructions in Xeoma folder > Security > Certificate > Readme.txt;
Added Xeoma version for ARMv8 (64 bit);
Added setup of cameras’ URLs via Web Server browser page;
Archive: Added visualization of sound events on the archive timescale. Now you can quickly review all the events detected by Sound Detector;
Time zones! We added the automatic switch to the daylight saving time and back;
Added Picture-in-picture to embed a dynamically updating picture from one camera into another’s view box;
We have added a new option in the Purchase page – now you can buy Xeoma Pro licenses with 3 years of updates already in package;
Added new partner program: get 7% off purchases made by your customers back in cash! You can notify us about purchases yourself or use the affiliate link to track purchases automatically;
Improved performance of camera stream decoding under high CPU load;
Archive: accelerated loading of archive database.
Added support for PTZ of the Beward BD75-1 cam;
Added support for 4-lens cameras Arecont Vision AV8185DN and AV20185DN.
Web server: Fixed bug with duplicating a chain where Web server’s URLs got duplicated as well;
Web server: fixed bug with Web server’s password being lost after another module is added;
Android: fixed bug with launch of Xeoma on some tablets or smart phones (including Intel-based ones);
Android: fixed the 100% CPU load when client is closed via the UI;
Face Detector: fixed occasional crashes under Linux in Face Detector;
Fixed the “Can’t copy one or several files” error for installation of the program to a non-default directory;
FTP upload: fixed transfer of vp8/vp9 files with sound from Xeoma through FTP.

[close]

http://felenasoft.com/
Titel: Xeoma 16.10.31
Beitrag von: SiLæncer am 09 November, 2016, 12:23
Changelog

PRO: Added Detector of abandoned objects. It can be used to look for unwanted vehicles, or objects in an area such as for example restricted territory or railway station;
PRO: Added Smoke Detector. It will help you automatically detect if there’s a fire or smoke in the camera’s field of view;
PRO: Added heat map. Now you can quickly review where the most of motion occurs (for example, in a shop). See this feature in Archive menu –> Heat map;
Xeoma Pro Your Cloud mode can now be launched from Xeoma UI. Create your own Video Surveillance as a Service system;
PRO: Added multilayer eMap. Now you can have several maps to put your cameras on, and switch between them in a single click;
PRO: In the ANPR module you can now use your own third-party utility for license plate recognition, and choose where to store the suggested OpenAlpr utility. Click here to learn about setup;
Added new type of licenses will help you upgrade your Xeoma Standard licenses to Xeoma Pro licenses;
Added TLS secure connection between client and server. See instructions in Xeoma folder > Security > Certificate > Readme.txt;
Added Xeoma version for ARMv8 (64 bit);
Added setup of cameras’ URLs via Web Server browser page;
Archive: Added visualization of sound events on the archive timescale. Now you can quickly review all the events detected by Sound Detector;
Time zones! We added the automatic switch to the daylight saving time and back;
Added Picture-in-picture to embed a dynamically updating picture from one camera into another’s view box;
We have added a new option in the Purchase page – now you can buy Xeoma Pro licenses with 3 years of updates already in package;
Added new partner program: get 7% off purchases made by your customers back in cash! You can notify us about purchases yourself or use the affiliate link to track purchases automatically;
Improved performance of camera stream decoding under high CPU load;
Archive: accelerated loading of archive database.
Added support for PTZ of the Beward BD75-1 cam;
Added support for 4-lens cameras Arecont Vision AV8185DN and AV20185DN.
Web server: Fixed bug with duplicating a chain where Web server’s URLs got duplicated as well;
Web server: fixed bug with Web server’s password being lost after another module is added;
Android: fixed bug with launch of Xeoma on some tablets or smart phones (including Intel-based ones);
Android: fixed the 100% CPU load when client is closed via the UI;
Face Detector: fixed occasional crashes under Linux in Face Detector;
Fixed the “Can’t copy one or several files” error for installation of the program to a non-default directory;
FTP upload: fixed transfer of vp8/vp9 files with sound from Xeoma through FTP.

[close]

http://felenasoft.com/
Titel: ContaCam 5.3.0
Beitrag von: SiLæncer am 21 November, 2016, 12:29
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog

Password protect all cameras with form based authentication
Attach a snapshot to the daily email notification
Using the AVIR image resizing algorithm designed by Aleksey Vaneev

[close]

http://www.contaware.com/
Titel: ImWatcher 1.4
Beitrag von: SiLæncer am 05 Dezember, 2016, 20:30
Latest Changes

- Fixed a codec bug in video recording
- Improved used interface
- Updated Greek translation
- A lot of minor fixes

http://www.highmotionsoftware.com/products/imwatcher
Titel: IP Camera Viewer 4.01
Beitrag von: SiLæncer am 24 Dezember, 2016, 11:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

Changelog

Imporved Stability: The CPU memory utilization is optimized which leads to more responsiveness of application.
Support for ONVIF cameras: IP camera Viewer auto detects all the ONVIF cameras in your network.  Most new IP cameras are ONVIF-compliant and these can be automatically detected and can be easily added by IP Camera Viewer.
Support for new IP cameras: Support for 19 IP cameras including new brands like Ctronics, Hesavision, iBaby, Kkmoon and KTNC.  Please see our full list of supported IP cameras. 

[close]

http://www.deskshare.com/
Titel: Security Eye 3.3
Beitrag von: SiLæncer am 12 Januar, 2017, 06:00
(http://s26.postimg.org/oxkpmknfd/screenshot_207.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freeware

http://security-eye-software.com/
Titel: Xeoma 16.12.26
Beitrag von: SiLæncer am 18 Januar, 2017, 06:00
Changelog

PRO: enhanced Xeoma Pro Your Cloud log (added information about connected user and their IP address);
PRO: fixed redirect in Xeoma Pro Your Cloud. Now user doesn’t see address of the server they are being redirected to;
Added activation of licenses on virtual machines. Now you can activate licenses on a virtual machine if it has permanent access to the Internet or there is an activation server in the home network;
Rebranding utility: added commands to hide archive menu’s options “Search by motion”, “Search by license plates”, “License plates log”;
Added new “Condition” module. This module passes video stream to following modules in the chain if the pre-set logical condition is met;
Help screen at first launch is enhanced: now you can choose whether to add certain cameras from what Xeoma found, or cancel the search at all;
Added the Traditional Chinese language;
Web server: added possibility to add cameras through Xeoma’s web interface in a web browser;
Web server: added export of archive through Xeoma’s web interface in a web browser;
Web server: added logout button in Xeoma’s web interface in a web browser;
Web server: added option to change password for web interface login in a web browser;
Added limitations in Web interface for users of free and trial version of Xeoma. Now no live view, view of recordings, or change of settings is available for the free version; only one camera can be added and viewed, and no changing of password is available in the trial version;
Users: added possibility to use individual order of cameras also for administrator on different computers;
Users: enhanced individual order of cameras option. Now order is saved not just for every user but also set up tabs (division of all cameras into pages);
Added separate storage of settings for each operating system’s user. It means that if OS’s user changes, autologin into Xeoma will not be possible as Xeoma’s password will not autofilled for the new user;
Added support for cameras working over the https protocol;
Xeoma Android app: now still images from the app get stored in the system /screenshots folder;
Lite: prohibited activation of Lite licenses on virtual machines;
Added support for the 16-Megapixel camera Aviglion 16L-H4PRO-B(777933);
Added support for optical zoom in Reolink cameras;
Fixed issues with wrong image resolution in Screen capture when desktop font enlargement is used under Windows 10;
Fixed issue with the heat map still being shown on preview after exiting the archive;
Fixed the issue with checkboxes in USB camera getting reset after settings are closed;
Fixed the issue with recordings still shown on the timescale in archive viewer even though the camera was off;
Fixed crash under Linux when archive is being viewed;
Fixed white/black screen issue on some Android devices, including Xiaomi Red Rice;
Fixed issue when it was impossible to choose a USB camera from the list in Universal Camera settings if there were more than one USB camera;
Fixed launching of Xeoma’s ARM versions under ArchLinux;
Fixed image distortions in archive view;
Fixed cameras freezing when several Save To File modules are used;
Fixed bug with HTTP Switcher not working in web browsers when web server is using password protection;
Fixed bug with HTTP Switcher not working in web browsers for remote access.

[close]

http://felenasoft.com/
Titel: ImWatcher 1.5
Beitrag von: SiLæncer am 02 Februar, 2017, 17:00
Latest Changes

- Added a Scheduler to the camera's settings. Now you can set up the monitoring days and time for every camera
- Minor GUI improvements

http://www.highmotionsoftware.com/products/imwatcher
Titel: Security Eye 3.4
Beitrag von: SiLæncer am 13 Februar, 2017, 17:00
Whats new:>>

Security Eye can be easily rebranded now! RTSP protocol for IP cameras is supported now.

http://security-eye-software.com/
Titel: ContaCam 5.5.0
Beitrag von: SiLæncer am 19 Februar, 2017, 21:00
Whats new:>>

- If a DirectShow device path is not defined use the device name
  as device path (thanks to Shaun Daigle for reporting the problem)
- Support nonce reuse (-> faster polling for digest protected cams)
- poll.php and push.php if called directly use http basic auth
- Updated lftp.exe to version 4.6.6
- Fixed memory leak of CRT threads under Windows XP

http://www.contaware.com/
Titel: iSpy 6.6.3.0
Beitrag von: SiLæncer am 22 Februar, 2017, 12:30
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Added support for 2000+ new cameras
Support new version of FFMPEG
Completely re-written ONVIF support
Support for password digest authentication

IMPORTANT: This version of iSpy is no longer compatible with Windows XP (due to changes in FFMPEG).

http://www.ispyconnect.com/
Titel: Security Eye 3.5
Beitrag von: SiLæncer am 28 Februar, 2017, 18:00
Whats new:>>

Wizard is now used to help you to setup new cameras in Security Eye

http://security-eye-software.com/
Titel: iSpy 6.6.4.0
Beitrag von: SiLæncer am 03 März, 2017, 09:13
Whats new: >>

Bug fixes – freezing streams and startup time
Added ptz definition
Sources update
Detect old OS.

http://www.ispyconnect.com/
Titel: Xeoma 17.3.1 Beta
Beitrag von: SiLæncer am 10 März, 2017, 12:22
Changelog

PRO: added new visual web admin page for administrator of Xeoma Pro Your Cloud. All actions that you could do through configuration files are now available through the new interface;
PRO: added a special feature called “1-click Cloud” for addition of “local” cameras to your Cloud server. Once you have connected “local” cameras to a “local” Xeoma, go to Main menu -> Cloud service. Authorization form will appear for IP address and login for the Cloud server. If done correctly, your cameras will be automatically added on the Cloud server side (by means of HTTP Receiver and HTTP Sender modules);
PRO: added option to send screenshots to an external module or script in the “ANPR” module;
PRO: added a new “Cross-line Detection” module. It will detect crossing a line you drew only when the line is crossed in the needed direction. Handy for everywhere where direction matters like checkpoints and retail stores;
PRO: RTSP Broadcaster module can now emulate ONVIF PTZ. It means you can broadcast an rtsp stream that will respond to PTZ commands;
PRO: added option to activate license for the ianpr library in the “ANPR” module;
Added visualization of path direction for preview (Single or Multicamera View). You will see arrows now showing where the detected object has been moving;
HTTP Marking: added search by ID you used. Find the search box in archive’s menu. Also, with the free rebranding utility you can place a quick-access button for this option in archive icon bar. See more about in Article about HTTP Marking module ;
Web server interface design enhanced for a better user experience;
Added support for SSL/TLS certificates for clients on mobile devices. The certificate you use will be downloaded to the mobile device from your Xeoma server;
Onvif DVR streams are now automatically added as separate cameras;
Added support for h264 streams transmitted over http;
Added support for DVR HIKVISION DS-7216HGHI-F;
Added support for the .m3u8 format of streams;
Added scrollbar to Device List. If you have a lot of cameras and groups you can now conveniently scroll them up or down;
Connection dialog now saves combination to the same servers with different ports or under different users;
Screenshot: when direct saving to the archive is used, screenshot is now saved off the archive stream, not off the preview stream as previously;
Camera names are now saved also after drag and drop of Device List dialog;
Added Automatic switch to 24h or 12h format for browser view;
Added option to disable the “Low fps may ne caused by low network speed to Client” message in preview screen;
Fixed camera freezes when the “Save To File” module is used;
Fixed crash in the “Object Detector” module;
Fixed the current sensitivity level bar in Motion Detector;
Fixed the issue with low fps in Windows when many cameras are in preview window;
Fixed cameras freezing when the Unitor module is used;
Fixed names of files send via the Email Sending module;
PRO: fixed the monitored zone in the ANPR module.

[close]

http://felenasoft.com/
Titel: iSpy 6.6.7.0
Beitrag von: SiLæncer am 15 März, 2017, 12:22
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Media stream disconnect fix

http://www.ispyconnect.com/
Titel: ContaCam 5.5.5 Beta 5
Beitrag von: SiLæncer am 20 März, 2017, 12:22
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog

RTSP/H.264 HD network cameras are now working in latest beta (see beta under Download). We would be glad if you could support the development with a Donate Button, telling us whether your camera is listed in ContaCam Capture - Network dialog and working (if it's not the case we are happy to support also your maker/model)

[close]

http://www.contaware.com/
Titel: Xeoma 17.3.30 Beta
Beitrag von: SiLæncer am 01 April, 2017, 07:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Reduced processor load when “Preview and Archive” modules are used;
Reduced processor load when “Scheduler” modules are used;
Reduced processor load when a license server is used;
“Sending Email”: fixed wrong sending of messages when there are several filter modules of the same type with different settings in the chain.

[close]

http://felenasoft.com/
Titel: iSpy 6.7.3.0
Beitrag von: SiLæncer am 13 April, 2017, 09:13
Whats new:>>

Upgraded to .net framework 4.5
Added support for Reolink cameras (via RTMP)
Modified reconnect logic
Added server storage settings to webserver
Added error handling around Onvif discovery
Updated nuget packages

http://www.ispyconnect.com/
Titel: iSpy 6.7.4.0
Beitrag von: SiLæncer am 27 April, 2017, 18:00
Whats new:>>

Fixed an issue with mic buffer
Fixed an issue with slow startup/ lost camera streams causing stuttering

http://www.ispyconnect.com/
Titel: iSpy 6.7.5.0
Beitrag von: SiLæncer am 11 Mai, 2017, 17:00
Whats new:>>

Performance improvements
Added PTZ definition (SunEyes)
Fix potential deadlock

http://www.ispyconnect.com/
Titel: ContaCam 7.0.0
Beitrag von: SiLæncer am 14 Mai, 2017, 19:00
Changelog

Native RTSP cameras support (dropped VLC re-streaming of RTSP cameras)
Updated internal web server to Apache 2.4.25 and PHP 5.4.45 (both with OpenSSL 1.0.2k-fips)
Possibility to obscure the video source from the web interface
All cameras can now capture audio from a selectable source (removed Axis HTTP audio support, please use RTSP)
New status-bar pane showing the maximum overall movement detection buffers size

[close]

http://www.contaware.com/
Titel: Netcam Studio 1.5.4.0
Beitrag von: SiLæncer am 14 Mai, 2017, 20:00
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Whats new:>>

Updated all FFMPEG calls to the latest API
Rolled back some changes which had negative impact on performances in previous 1.5.x
Fixed audio noises problems with some codecs/cameras (ex: panasonic)
Fixed a potential Deadlock between Event Logger and Performance Metrics modules

http://www.netcamstudio.com/
Titel: iSpy 6.7.6.0
Beitrag von: SiLæncer am 15 Mai, 2017, 13:30
Whats new:>>

Fix connecting to ONVIF RTSP cameras that use digest authentication
Fix recording to AVI with audio
Performance improvements

http://www.ispyconnect.com/
Titel: Xeoma 17.5.5
Beitrag von: SiLæncer am 17 Mai, 2017, 12:25
Changelog

Xeoma Pro Your Cloud: added enhanced background monitoring of cloud service process with automatic restarts
ANPR: Added support for a newer version of iANPR tool (v.1.5). Among other great enhancements it can now recognize license plates of Poland, Lithuania, Latvia, Estonia, Ukraine and Moldova Republic. Also, it offers possibility to set minimum and maximum size of plates to recognize, which will aid in enhancing successful recognition rate
Fixed time in “Marking”, “Scheduler”, “Sending Email” modules: now it will be according to your time zone
Fixed the “Can’t rename file” error in archive that was caused by wrong time stamps

[close]

http://felenasoft.com/
Titel: iSpy 6.7.7.0
Beitrag von: SiLæncer am 19 Mai, 2017, 17:00
Whats new:>>

Fix issue with microphone recording
Add Russian translations

http://www.ispyconnect.com/
Titel: Netcam Studio 1.5.6.0
Beitrag von: SiLæncer am 23 Mai, 2017, 05:00
Whats new:>>

Fixed strange behaviour of the scheduler when combining multiple actions
Fixed process does not end properly when exiting application from the tray icon
Fixed sources numbering in rules manager
Added possibility to provide onvif endpoint manually when connecting cameras (in case a
camera is not detected or to connect using onvif outside of the local LAN).
New Tool: Timelapser (converts a set of images in a folder to a movie file).

http://www.netcamstudio.com/
Titel: Security Eye 3.6
Beitrag von: SiLæncer am 27 Mai, 2017, 22:00
(http://s26.postimg.org/oxkpmknfd/screenshot_207.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freeware

Whats new:>>

New ways to discover your cameras in the network.

http://security-eye-software.com/
Titel: IP Camera Viewer 4.04
Beitrag von: SiLæncer am 31 Mai, 2017, 06:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: iSpy 6.7.8.0
Beitrag von: SiLæncer am 07 Juni, 2017, 17:00
Whats new: >>

Onvif update
Network reconnect issue fix
MJPEG issue fix

http://www.ispyconnect.com/
Titel: iSpy 6.7.9.0
Beitrag von: SiLæncer am 08 Juni, 2017, 12:25
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fixed afeed dropout issue with some RTSP cameras

http://www.ispyconnect.com/
Titel: iSpy 6.8.0.0
Beitrag von: SiLæncer am 16 Juni, 2017, 17:00
Whats new: >>

Performance improvement
Crashing bug fix in NAudio on broken audio streams

http://www.ispyconnect.com/
Titel: Netcam Studio 1.6.1.0
Beitrag von: SiLæncer am 28 Juni, 2017, 09:13
(http://www.netcamstudio.com/Images/images/screenshots/Client_Live_Thumb.jpg)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Freeware

Changelog

Improved decoding over RTSP/UDP to prevent artefacts / decoding issues
Fixed Use SSL not saved in the client login screen
Fixed some rules are triggered twice when the condition is met
Fixed cleanup of old files on Dropbox not working anymore
Added possibility to select number of days in web client library
Hiding camera's passwords when writing in the event log
Library screen improvements

[close]

http://www.netcamstudio.com/
Titel: Xeoma 17.6.23 Beta
Beitrag von: SiLæncer am 29 Juni, 2017, 12:27
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Xeoma Pro Your Cloud: added new web interface for admin and users. New Admin page allows administrator to manage Cloud and users, and User page is for users to view their cameras, their records, and run search for cameras – all in browser.
Added search for cameras through web interface.
Xeoma Pro Your Cloud: added option to limit how many sub-users your Cloud subscriber is allowed to create.
Xeoma Pro Your Cloud: added option to check both login and password for authorization (for example, login@password) when default password-only check is not enough secure.
Xeoma Pro Your Cloud: added option to set up the “FTP Upload” module in configuration files in addition to previously available setup through UI (client connection).
Xeoma Pro Your Cloud: optimized log in Xeoma_cloud.log file.
Xeoma Pro Your Cloud: fixed the ClientsCountLimit option for limitation of user connections when 0 is set.
Xeoma Pro Your Cloud: fixed import and export of settings.
Xeoma Pro: added option to select detection zone for iANPR library in the “ANPR” module.
Xeoma Pro: added %FACESCOUNT% macro that allows to send number of faces detected by “Face Detector” to destination modules “HTTP Request Sender”, “Application Runner” and “Send Email”.
Xeoma Pro: enhanced training and further recognition of faces in “Face Detector”.
Web Server: added new web interface for web browser view. More features of the client connection are now available in browser including camera search, addition or setup.
Added failover settings. Now you can have one or several backup servers for automatic switch in case of failure of your main servers. Find that option in Main menu -> Install -> Backup server.
Added support for CUDA hardware acceleration under Linux. If your graphics card or processor support the CUDA technology, it might help reduce overall CPU load.
Universal Camera: added option to buffer the incoming stream. It will aid to smoother real-time view of cameras.
Multi-server mode: Xeoma will now remember what Pages you had set in Layouts and your last viewed Page, and re-open it next time you connect.
Device List: added option to toggle/expand all groups and sub-groups.
Device List: added opportunity to change the Device List’s window size by dragging its ends.
Camera search: added opportunity to enter several passwords, usernames, and ports for search at the same time.
HTTP Request Sender: added new mode of work to send commands at certain intervals of time.
Added opportunity to disable saving of metadata from Motion Detector to the database to reduce its size significantly. Choose this option if you don’t need search by area or visualization of motion objects in the Xeoma’s Archive viewer, and you want smaller database size.
Enhanced ONVIF search for cameras, including LTV brand.
Added support for flash (flv) stream from the Maginon IPC camera.
Fixed issue where big-sized archives would freeze when overwriting was engaged.
Fixed display of more than 6 cameras in web browser interface.
Fixed remote access to web interface when 10090 port is forwarded.
Fixed disappearance of PTZ control at server restarts.
Fixed frequent deactivation of licenses on virtual machines when Internet access is unstable.
Fixed activation of 10 or more serial numbers at the same time.
Fixed search for Novicam DVR AR1108.

[close]

http://felenasoft.com/
Titel: Security Eye 3.7
Beitrag von: SiLæncer am 30 Juni, 2017, 20:30
(http://s26.postimg.org/oxkpmknfd/screenshot_207.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freeware

Whats new:>>

Masking tool is added. Faster connection of cameras.

http://security-eye-software.com/
Titel: iSpy 6.8.1.0
Beitrag von: SiLæncer am 03 Juli, 2017, 09:17
Whats new: >>

Fix for motion detection bug
Fix for some plugin issues

http://www.ispyconnect.com/
Titel: iSpy 6.8.2.0
Beitrag von: SiLæncer am 10 Juli, 2017, 18:00
Whats new: >>

Updated camera database
Fixed a bug with storage directories
Fixed a bug with VLC audio sources

http://www.ispyconnect.com/
Titel: Security Eye 3.9
Beitrag von: SiLæncer am 17 Juli, 2017, 19:00
Whats new:>>

Internal Changes.

http://security-eye-software.com/
Titel: Xeoma 17.7.31 Beta
Beitrag von: SiLæncer am 03 August, 2017, 09:10
Changelog

vFixed search for Novicam DVR AR1108;
Fixed information on preview from modules ANPR, Object Detector, Face Detector under Linux;
Fixed high load issue under Linux when the client part is minimized;
Optimized load from client conncetion;
Fixed camera names displayed in Multi-server mode.

[close]

http://felenasoft.com/
Titel: Xeoma 17.7.31 Final
Beitrag von: SiLæncer am 11 August, 2017, 09:00
Changelog

Xeoma Pro Your Cloud: added new web interface for admin and users. New Admin page allows administrator to manage Cloud and users, and User page is for users to view their cameras, their records, and run search for cameras – all in browser.
Added search for cameras through web interface.
Xeoma Pro Your Cloud: added option to limit how many sub-users your Cloud subscriber is allowed to create.
Xeoma Pro Your Cloud: added option to check both login and password for authorization (for example, login@password) when default password-only check is not enough secure.
Xeoma Pro Your Cloud: added option to set up the “FTP Upload” module in configuration files in addition to previously available setup through UI (client connection).
Xeoma Pro Your Cloud: optimized log in Xeoma_cloud.log file.
Xeoma Pro Your Cloud: fixed the ClientsCountLimit option for limitation of user connections when 0 is set.
Xeoma Pro Your Cloud: fixed import and export of settings.
Xeoma Pro: added option to select detection zone for iANPR library in the “ANPR” module.
Xeoma Pro: added %FACESCOUNT% macro that allows to send number of faces detected by “Face Detector” to destination modules “HTTP Request Sender”, “Application Runner” and “Send Email”.
Xeoma Pro: enhanced training and further recognition of faces in “Face Detector”.
Web Server: added new web interface for web browser view. More features of the client connection are now available in browser including camera search, addition or setup.
Added failover settings. Now you can have one or several backup servers for automatic switch in case of failure of your main servers. Find that option in Main menu -> Install -> Backup server.
Added support for CUDA hardware acceleration under Linux. If your graphics card supports the CUDA technology, it might help reduce overall CPU load.
Universal Camera: added option to buffer the incoming stream. It will aid to smoother real-time view of cameras.
Multi-server mode: Xeoma will now remember what Pages you had set in Layouts and your last viewed Page, and re-open it next time you connect.
Device List: added option to toggle/expand all groups and sub-groups.
Device List: added opportunity to change the Device List’s window size by dragging its ends.
Camera search: added opportunity to enter several passwords, usernames, and ports for search at the same time.
HTTP Request Sender: added new mode of work to send commands at certain intervals of time.
Added opportunity to disable saving of metadata from Motion Detector to the database to reduce its size significantly. Choose this option if you don’t need search by area or visualization of motion objects in the Xeoma’s Archive viewer, and you want smaller database size.
Enhanced ONVIF search for cameras, including LTV brand.
Added support for flash (flv) stream from the Maginon IPC camera.
Fixed issue where big-sized archives would freeze when overwriting was engaged.
Fixed display of more than 6 cameras in web browser interface.
Fixed remote access to web interface when 10090 port is forwarded.
Fixed disappearance of PTZ control at server restarts.
Fixed frequent deactivation of licenses on virtual machines when Internet access is unstable.
Fixed activation of 10 or more serial numbers at the same time;
Fixed search for Novicam DVR AR1108;
Fixed information on preview from modules ANPR, Object Detector, Face Detector under Linux;
Fixed high load issue under Linux when the client part is minimized;
Optimized load from client connection;
Fixed camera names displayed in Multi-server mode.

[close]

http://felenasoft.com/
Titel: Xeoma 17.8.31
Beitrag von: SiLæncer am 07 September, 2017, 09:19
Whats new:>>

Fixed crash when motion search by area is engaged under ARM platform.

http://felenasoft.com/
Titel: Security Eye 4.0
Beitrag von: SiLæncer am 20 September, 2017, 12:34
Whats new:>>

New IP cameras, new languages. Improvements in recording engine and settings.

http://security-eye-software.com/
Titel: iSpy 6.8.4.0
Beitrag von: SiLæncer am 25 September, 2017, 12:25
Whats new: >>

Performance improvement
Bug fixes
Wizard update
Text to speech fix
Also, launched our new windows service based platform, Agent

http://www.ispyconnect.com/
Titel: iSpy 6.8.5.0
Beitrag von: SiLæncer am 27 September, 2017, 13:30
Whats new: >>

Fix issue with PTZ override URLs
Added support for decimal frame rate limiters

http://www.ispyconnect.com/
Titel: IP Camera Viewer 4.05
Beitrag von: SiLæncer am 16 Oktober, 2017, 21:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: ContaCam 7.5.0
Beitrag von: SiLæncer am 19 Oktober, 2017, 06:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

Freeware

Changelog

For network devices when starting try to connect infinitely (dropped the "Autostart a network camera each" option as it is not necessary with the new connect infinitely feature)
Tabbed document interface (TDI)
Show a warning if sleep/standby/hibernation enabled
Use the Ctrl key to switch between Add and Remove Detection Zones
Fixed recent changes/problems of window.innerWidth/Height
In web interface dropped swf (flash player) backwards compatibility
Dropped Windows XP and Windows 2003 support (ReactOS support has also been dropped because it only implements the Windows 2003 API)

[close]

http://www.contaware.com/
Titel: iSpy 6.8.6.0
Beitrag von: SiLæncer am 19 Oktober, 2017, 20:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

ffmpeg update
bug fix rollup

http://www.ispyconnect.com/
Titel: iSpy 6.8.7.0
Beitrag von: SiLæncer am 31 Oktober, 2017, 11:00
Whats new: >>

Bug fixes

http://www.ispyconnect.com/
Titel: iSpy 6.8.8.0
Beitrag von: SiLæncer am 02 November, 2017, 06:00
Whats new: >>

Fix issue with post recording events (cloud upload/ ftp)

http://www.ispyconnect.com/
Titel: iSpy 6.8.9.0
Beitrag von: SiLæncer am 20 November, 2017, 18:00
Whats new: >>

Fix bug with recording
Performance improvement on recording from ffmpeg

http://www.ispyconnect.com/
Titel: Xeoma 17.11.24 Beta
Beitrag von: SiLæncer am 25 November, 2017, 17:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    PRO: Added the new “ANPR Sender to FTP” module. With this module, you can send photos and information about a recognized number from the ANPR module to an FTP server of your choice.
    PRO: Added the new “Loitering Detector” module. With this module, you can have the system detect when there is a loitering object in the camera’s view for longer than a set period of time.
    Xeoma Pro Your Cloud: Added a “maximum time of storage” setting in addition to the already available limitation for maximum allowed disk space. With this setting, you can assign subscribers a certain time of data storage within their subscription.
    Xeoma Pro Your Cloud: added a new option to limit resolution and bitrate for a stream used for saving archives.
    Application Runner: added the %NAMES% macro that carries the name of a recognized person from Face Detector.
    Enhanced Xeoma’s auto search for cameras: added support for cameras that work through ONVIF H265 protocol.
    Added a new console command -savepassword 0/1 that permits/prohibits saving of password even for a connection within a local network or on the same computer. Use it to restrict access to Xeoma on a shared computer or in environments where password should be entered each time Xeoma is accessed.
    Added support for PTZ functions of the Sricam SP008 camera.
    Windows: added option to open different clients in Fullscreen on various monitors (already available for Mac and Linux).
    Added support for FTP Upload from the Dahua cameras. Now you can connect Dahua cameras to a remote server (including our Xeoma Cloud) even without a static public IP address or a working 24/7 computer.
    Multiserver mode: added display of messages from detectors in preview.
    Archive: added support for recording from cameras that use H.264+ Smart Codec and H.265+ Smart Codec.
    Xeoma’s installation folder on Windows is changed. Now Xeoma gets installed into the standard folder C:\Program Files\Xeoma.
    The “Layouts” menu has a new option to hide the All Cameras page when you have multiple tabs. Find it in Layouts-Manage Layouts-Hide All Cameras page.
    Enhanced smoothness of Xeoma’s interface thanks to OpenGL optimization.
    Fixed possible issues with saving archives of the size over 20TB.
    Fixed the certificate error in VPN connection to a Xeoma server.
    Fixed work with h265 streams of Dahua cameras.
    Fixed mix-up of different camera images when several FTP Receiver modules are used.
    Fixed issue with files getting cut off when the Save to file module is used for high definition cameras.
    Cross-line Detector: fixed the Reset Interval.

[close]

http://felenasoft.com/
Titel: iSpy 6.9.0.0
Beitrag von: SiLæncer am 05 Dezember, 2017, 09:03
Whats new: >>

Better encoding quality on recorder

http://www.ispyconnect.com/
Titel: Security Eye 4.2
Beitrag von: SiLæncer am 13 Dezember, 2017, 19:00
(https://s26.postimg.cc/ieo2ml6x5/screenshot_120.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freeware

Whats new:>>

Privacy mask tool. User accounts. Video Effects.

http://security-eye-software.com/
Titel: iSpy 6.9.1.0
Beitrag von: SiLæncer am 12 Januar, 2018, 12:29
Whats new: >>

Updated to new version of ffmpeg
Added support for non packed audio
Added new PTZ definitions

http://www.ispyconnect.com/
Titel: iSpy 6.9.2.0
Beitrag von: SiLæncer am 01 Februar, 2018, 18:00
Whats new: >>

Reduce file size of recorded files

http://www.ispyconnect.com/
Titel: iSpy 6.9.6.0
Beitrag von: SiLæncer am 06 Februar, 2018, 09:13
Whats new: >>

rtsp bug fix
file size update (quality settings)
framerate update

http://www.ispyconnect.com/
Titel: iSpy 6.9.7.0
Beitrag von: SiLæncer am 07 Februar, 2018, 13:30
Whats new: >>

fix potential encoding bug

http://www.ispyconnect.com/
Titel: iSpy 6.9.8.0
Beitrag von: SiLæncer am 09 Februar, 2018, 12:22
Whats new:>>

Add pelco spectra enhanced ptz
Fix issue with google drvie cloud
Add stretchy reconnect camera logic

http://www.ispyconnect.com/
Titel: Xeoma 18.2.2 Beta
Beitrag von: SiLæncer am 15 Februar, 2018, 09:08
Changelog

Added support for P2P connection for cameras that use the AEeye Cloud for communication (Windows 32 bit);
Xeoma Pro Your Cloud: added configuration of the Email sending and SMS Sending modules through web interface;
Xeoma Pro Your Cloud: added support for users administration through REST API;
Added configuration of the Motion Detector module through web interface (changing of the detection zone and its sensitivity);
Optimized recording of archives when large numbers of cameras are used;
Added choice of what stream to use in WebRTC (preview or archive stream);
Added support for sound from cameras that use the pcm_u8 codec (wav);
Universal Camera: added choice of protocols for camera to communicate with the server (“Auto”, “UDP”, “TCP”, “UDP Multicast”);
Added support for PTZ control of the d-link DCS-5222LB camera;
Layouts: added 1×2 and 4?1 layouts for cameras;
Web server: added prerecord for work with “Another Xeoma”;
Preview and Archive: added new values 60, 70, 80GB for maximum storage volume;
Users: all acounts in Main menu -> Remote Acces -> Users are now in alphabetical order;
Added new information message about loading of archives at server launch that shows loading process and stages;
Fixed issue of client part not launched (Run as superuser failed error) that occured on some of the Linux OS (for example, openSUSE) when the server is installed to auto start;
“Cross-Line Detector”: fixed inversion of lines;
Eliminated sending of test text message in the “SMS Sending” module at server restart;
Fixed distortions at archive speeded playback.

[close]

http://felenasoft.com/
Titel: ContaCam 7.7.0
Beitrag von: SiLæncer am 19 Februar, 2018, 09:04
Changelog

To start the ContaCam web interface as a Web App it's now possible to create a home screen icon from your mobile browser's menu (it says something like "Add to Home")
The web interface live view displays a hint when a motion is being detected
Logout button for the web interface
Option to get an email alert when AC 100-240V goes OFF
Configurable web server SSL certificate files
The delete cameras dialog is closing open devices automatically
Added metadata title to created video files
Hold down the Ctrl key to keep the aspect ratio while resizing a camera view

[close]

http://www.contaware.com/
Titel: iSpy 7.0.0.0
Beitrag von: SiLæncer am 16 März, 2018, 14:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fix rare hang issue
Retry file in use error for cloud uploads
Add PTZ definitions

http://www.ispyconnect.com/
Titel: iSpy 7.0.1.0
Beitrag von: SiLæncer am 28 März, 2018, 17:00
Whats new: >>

Fix an issue with scanning for rtsp cameras
Add more error handling around cloud uploads

http://www.ispyconnect.com/
Titel: iSpy 7.0.2.0
Beitrag von: SiLæncer am 07 April, 2018, 10:00
Whats new: >>

Add wav file audio support
Updates to FFMPEG
Minor bug fixes

http://www.ispyconnect.com/
Titel: iSpy 7.0.3.0
Beitrag von: SiLæncer am 11 April, 2018, 09:15
Whats new: >>

bug fixes
updates to add camera wizard
fixes for some camera timeouts

http://www.ispyconnect.com/
Titel: Xeoma 18.4.24 Beta
Beitrag von: SiLæncer am 25 April, 2018, 17:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Enhanced Xeoma’s free edition: now you can view up to 1000 cameras live in Xeoma’s free mode! Free mode still allows for up to 3 modules per chain (max 1 video source per chain), and up to 4 Preview and Archive modules total, and up to 4 Email Sending modules total. View, access and changing of settings is available from the same computer.
Xeoma Pro: added logs (CSV reports) for users’ opening/closing cameras;
Added the ability to disable the recording of data from detectors to run the program completely without the archive.db database. This increases the performance of the archive in cases where the search for motion and other events is not needed;
Console: added the console command -installdir to set the installation path through the terminal (command line);
Console: added a console command to tell the client the address and port of the connection to a particular server. Use the following syntax -client UserPassword@ServerIPAddress:ServerXeomaPort (for example: -client test@192.168.0.4:8090);
Console: added the console command -reindexingArchive for re-indexing of the archive;
Console: added the console command -fullscreen to run Xeoma in full-screen mode;
Added the ability to enable/disable encryption with the console command -sslconnection;
Increased the maximum speed of playback of the archive to x64;
RTSP Broadcasting: added the ability to change the port;
Added the ability to automatically switch between the Preview stream and the Archive stream if one of them stops responding;
Increased the maximum speed of playback of the archive to x64;
Added support for the new 1.6 version of the iANPR utility for ARM;
Added support for the Arducam AR0134 camera for Linux (launched with the -arducam key) and for Linux ARM (on by default);
Sending Email: fixed the interval between message;
Android: fixed incorrect display of the speed label at a speed of 10x and above;
Fixed the Internet connection error message on virtual machines at every launch;
Corrected distortions that used to happen during accelerated playback of the archive;
Fixed the problem of writing archives to disks larger than 5TB on 32-bit Linux.
Fixed the “Only detect changing areas” option in the ANPR module;
Eliminated occasional recording while the Motion Detector is in the Skipping state.

[close]

http://felenasoft.com/
Titel: Perfect IP Camera Viewer 4.3
Beitrag von: SiLæncer am 26 April, 2018, 06:00
(https://s26.postimg.cc/tl98yxg7d/screenshot_1108.png)
Perfect IP Camera Viewer allows you to create a professional video surveillance system on your computer in minutes.

Freeware

Whats new:>>

PTZ Control is available.
User accounts support.
Privacy mask tool.

www.perfect-surveillance.com
Titel: iSpy 7.0.4.0
Beitrag von: SiLæncer am 27 April, 2018, 06:00
Whats new: >>

Updates to add camera wizard (detect onvif devices)
Updated FFMPEG
Updates to IP camera connections
Fix issue with encoded usernames and empty passwords
Add new web services

http://www.ispyconnect.com/
Titel: iSpy 7.0.5.0
Beitrag von: SiLæncer am 29 April, 2018, 19:00
Whats new: >>

Fix issue with PTZ controller and Onvif Presets
Fix issue with ffmpeg rtsp connections

http://www.ispyconnect.com/
Titel: Netcam Studio 1.7.0.0
Beitrag von: SiLæncer am 03 Mai, 2018, 09:11
(https://i.postimg.cc/HWJ513b1/screenshot-2249.png)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

Changelog

Fixed Rule Manager may fail to initiate properly
Fixed Push Notification may not be sent anymore after some time
Updated Web Client (Migrated from ng4 to ng5)
New FFMPEG Library
Improvements in multi-threaded HTTP (may be faster to view multiple sources at time and may also use more resources)

[close]

http://www.netcamstudio.com/
Titel: iSpy 7.0.6.0
Beitrag von: SiLæncer am 08 Mai, 2018, 13:05
Whats new: >>

Fix audio issues

http://www.ispyconnect.com/
Titel: Home Eye 2.2.0
Beitrag von: SiLæncer am 10 Mai, 2018, 20:00
(https://s26.postimg.cc/axpr635yh/screenshot_1242.png)
Home Eye secures your home and office by utilizing your old smartphone, tablet, laptop or PC as part of a security/surveillance system.

Everyone has a least one decommissioned piece of hardware sitting around collecting dust - so why not use it as part of a security system. The best part is you already paid for the components!

Freeware

http://home-eye-app.com/
Titel: iSpy 7.0.7.0
Beitrag von: SiLæncer am 15 Mai, 2018, 13:30
Whats new: >>

Fix for reconnecting to some RTSP streams
Fix for visual smearing of some high res UDP streams

http://www.ispyconnect.com/
Titel: Perfect IP Camera Viewer 4.4
Beitrag von: SiLæncer am 15 Mai, 2018, 19:00
Whats new:>>

Major bugs fixed.
Recording engine updated.
New IP cameras supported.

www.perfect-surveillance.com
Titel: Xeoma 18.5.4
Beitrag von: SiLæncer am 18 Mai, 2018, 06:00
Changelog

Enhanced Xeoma’s free edition: now you can view up to 1000 cameras live in Xeoma’s free mode! Free mode still allows for up to 3 modules per chain (max 1 video source per chain), and up to 4 Preview and Archive modules total, and up to 4 Email Sending modules total. View, access and changing of settings is available from the same computer.
Xeoma Pro: added logs (CSV reports) for users’ opening/closing cameras;
Added the ability to disable the recording of data from detectors to run the program completely without the archive.db database. This increases the performance of the archive in cases where the search for motion and other events is not needed;
Console: added the console command -installdir to set the installation path through the terminal (command line);
Console: added a console command to tell the client the address and port of the connection to a particular server. Use the following syntax -client UserPassword@ServerIPAddress:ServerXeomaPort (for example: -client test@192.168.0.4:8090);
Console: added the console command -reindexingArchive for re-indexing of the archive;
Console: added the console command -fullscreen to run Xeoma in full-screen mode;
Added the ability to enable/disable encryption with the console command -sslconnection;
Increased the maximum speed of playback of the archive to x64;
RTSP Broadcasting: added the ability to change the port;
Added the ability to automatically switch between the Preview stream and the Archive stream if one of them stops responding;
Increased the maximum speed of playback of the archive to x64;
Added support for the new 1.6 version of the iANPR utility for ARM;
Added support for the Arducam AR0134 camera for Linux (launched with the -arducam key) and for Linux ARM (on by default);
Sending Email: fixed the interval between message;
Android: fixed incorrect display of the speed label at a speed of 10x and above;
Fixed the Internet connection error message on virtual machines at every launch;
Corrected distortions that used to happen during accelerated playback of the archive;
Fixed the problem of writing archives to disks larger than 5TB on 32-bit Linux.
Fixed the “Only detect changing areas” option in the ANPR module;
Archive: removed the diagnostics window about archive loading;
Xeoma Pro Your Cloud: fixed error in authorization of web users when using the MainCloudWebInterfaceIpAddress parameter;
iOS: fixed app crash due to wrong timescale data and its transmission to the ios client;
Eliminated occasional recording while the Motion Detector is in the Skipping state.

[close]

http://felenasoft.com/
Titel: IP Camera Viewer 4.06
Beitrag von: SiLæncer am 30 Mai, 2018, 13:30
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: Xeoma 18.5.29
Beitrag von: SiLæncer am 05 Juni, 2018, 12:28
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Added new module “Image Crop”. With its help you can automatically crop the incoming image. Just paint the zone you want to keep in red color in the module’s settings;
Xeoma Pro You Cloud: added more logs for users connecting to Cloud server when redirect is engaged;
Optimized playback of video streams with the WebRTC technology. Use the new option in the Web Server module’s settings to shift the task of transcoding to the browser’s side or leave it to Xeoma if the browser isn’t coping with it;
Customization: added option to make sample chains with the modules of your choice. Only works with the Pro edition;
Xeoma Cloud: now the default chain consists of only Universal Camera and Preview and Archive modules. Feel free to add all modules you need to that chain;
Motion Detector: added embedded hint that will advice what setting filters out image and doesn’t let it further down the chain;
Sending Email: added delay in starting collecting images or videos if you choose to attach them to emails (in addition to the previously available collecting media immediately or with pre-record time);
ANPR: added sensitivity setting to use in the changing areas;
Increased speed of client-to-server connection when encryption (SSL) is engaged;
Increased download speed of exported extracts from the archive when client is connected remotely;
Sending Email: fixed the load that the turned off module would occasionally give;
Fixed the license message when Xeoma in the free edition is updated through GUI;
ANPR: fixed the “Detect absence of cars” detection type.

[close]

http://felenasoft.com/
Titel: Xeoma 18.6.5
Beitrag von: SiLæncer am 06 Juni, 2018, 12:31
Changelog

Added new module “Image Crop”. With its help you can automatically crop the incoming image. Just paint the zone you want to keep in red color in the module’s settings;
Xeoma Pro You Cloud: added more logs for users connecting to Cloud server when redirect is engaged;
Optimized playback of video streams with the WebRTC technology. Use the new option in the Web Server module’s settings to shift the task of transcoding to the browser’s side or leave it to Xeoma if the browser isn’t coping with it;
Customization: added option to make sample chains with the modules of your choice. Only works with the Pro edition;
Xeoma Cloud: now the default chain consists of only Universal Camera and Preview and Archive modules. Feel free to add all modules you need to that chain;
Motion Detector: added embedded hint that will advice what setting filters out image and doesn’t let it further down the chain;
Sending Email: added delay in starting collecting images or videos if you choose to attach them to emails (in addition to the previously available collecting media immediately or with pre-record time);
ANPR: added sensitivity setting to use in the changing areas;
Increased speed of client-to-server connection when encryption (SSL) is engaged;
Increased download speed of exported extracts from the archive when client is connected remotely;
Sending Email: fixed the load that the turned off module would occasionally give;
Fixed the license message when Xeoma in the free edition is updated through GUI;
ANPR: fixed the “Detect absence of cars” detection type.

[close]

http://felenasoft.com/
Titel: Security Eye 4.4
Beitrag von: SiLæncer am 09 Juni, 2018, 19:00
(https://s26.postimg.cc/ieo2ml6x5/screenshot_120.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freeware

Whats new:>>

PTZ Control.

http://security-eye-software.com/
Titel: Xeoma 18.6.14
Beitrag von: SiLæncer am 19 Juni, 2018, 06:15
Changelog

Switched format for archive recordings made with direct saving to the archive without decoding from MP4 to MKV. It will reduce the processor load (thanks to no need to decode the sound stream in this case), but also increase the audio quality to the camera’s original quality;
Fixed start of new day for continuous recording in .xem archives;
Eliminated issue with HTTP Receiver continuing to work even when turned off;
Fixed crashes caused by use of some intellectual modules.

[close]

http://felenasoft.com/
Titel: iSpy 7.0.9.0
Beitrag von: SiLæncer am 23 Juni, 2018, 18:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Update to ffmpeg v4
Add GPU encode and decode support
Fix issue with USB camera reconnect
CPU optimise
Other minor bug fixes

http://www.ispyconnect.com/
Titel: iSpy 7.1.0.0
Beitrag von: SiLæncer am 26 Juni, 2018, 09:17
Whats new: >>

Default ffmpeg to prefer TCP encoding

http://www.ispyconnect.com/
Titel: iSpy 7.1.1.0
Beitrag von: SiLæncer am 27 Juni, 2018, 13:30
Whats new: >>

Bug fix

http://www.ispyconnect.com/
Titel: iSpy 7.1.2.0
Beitrag von: SiLæncer am 01 Juli, 2018, 19:00
Whats new: >>

Fix bug with recording to mobile profiles
Add support for older onvif devices

http://www.ispyconnect.com/
Titel: Xeoma 18.7.10 Beta
Beitrag von: SiLæncer am 11 Juli, 2018, 20:00
Changelog

Added IPv6 Internet Protocol support. Now you can work not just with IPv4 addresses (addresses that look like a combination of numbers separated by dots, for example 11.222.33.4444) but also with IPv6 addresses that look like a combination of digits separated by colons, for example 2001:0db8:11a3:09d7:1f34:8a2e:07a0:765d or ::ae21:ad12;
Hardware keys support added;
PRO: added automatic PTZ-patrol. Now Xeoma PTZ control has more options to help you create your own presets for an automated guard tour for your PTZ camera;
Archive time of counting was improved. Now it’s not the actual time of the file creation, but the total duration of the archive;
The “Image refresh interval” option in the “Archive” module was fixed. Now when you selecte large values the function works correctly;
Fixed xem archive deleting via interface problem. Now, when deleting, the correct interval is selected;
Fixed installation/uninstallation to the directory C:Program Files (Windows). Also deleting settings problem is fixed;
The “HTTP Sending” module is fixed. Now the “test” command is performed correctly;
Fixed the problem of activating the program on a physical PC after transferring settings from the virtual machine;
The “Web server” module is fixed. One camera view mode is working properly in IE and Edge now;
Fixed PTZ on the Hikvision DS-2DE5220I-AE camera. Improved finding the correct PTZ set when the port in the “Universal camera” module is changed;
Fixed distortions when h265 stream is decoded on the client side.

[close]

http://felenasoft.com/
Titel: Xeoma 18.7.10 Final
Beitrag von: SiLæncer am 18 Juli, 2018, 18:00
Changelog

Added IPv6 Internet Protocol support. Now you can work not just with IPv4 addresses (addresses that look like a combination of numbers separated by dots, for example 11.222.33.4444) but also with IPv6 addresses that look like a combination of digits separated by colons, for example 2001:0db8:11a3:09d7::765d;
Hardware keys support added;
PRO: added automatic PTZ-patrol. Now Xeoma PTZ control has more options to help you create your own presets for an automated guard tour for your PTZ camera;
Archive time of counting was improved. Now it’s not the actual time of the file creation, but the total duration of the archive that counts. For example you have an hour-worth of recordings made 32 days ago, and 1 hours of recordings made today. This will be counted as 2 days of recordings instead of 32 days as before. In this case, if the archive retention period is set to 30 days, your old records will not be overwritten;
The “Image refresh interval” option in the “Archive” module was fixed. Now when you selecte large values the function works correctly;
Fixed xem archive deleting via interface problem. Now, when deleting, the correct interval is selected;
Fixed installation/uninstallation to the directory C:Program Files (Windows). Also deleting settings problem is fixed;
The “HTTP Sending” module is fixed. Now the “test” command is performed correctly;
Fixed the problem of activating the program on a physical PC after transferring settings from the virtual machine;
The “Web server” module is fixed. One camera view mode is working properly in IE and Edge now;
Fixed PTZ on the Hikvision DS-2DE5220I-AE camera. Improved finding the correct PTZ set when the port in the “Universal camera” module is changed;
Fixed distortions when h265 stream is decoded on the client side.

[close]

http://felenasoft.com/
Titel: Perfect IP Camera Viewer 4.4.1
Beitrag von: SiLæncer am 13 August, 2018, 21:00
(https://s26.postimg.cc/tl98yxg7d/screenshot_1108.png)
Perfect IP Camera Viewer allows you to create a professional video surveillance system on your computer in minutes.

Freeware

www.perfect-surveillance.com
Titel: ContaCam 9.0.0
Beitrag von: SiLæncer am 10 September, 2018, 12:25
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

ContaCam is now DONATIONWARE
Privacy mask option: removed detection zones can be obscured
Document tabs have got a close button
Simpler Camera Advanced Settings dialog
Dropped .avi video file support, always saving in .mp4
Manual / continuous recording is now performed by the motion engine (it makes no sense to have a separate continuous recording engine)
Updated internal web server to Apache 2.4.34 and PHP 5.6.37 (both with OpenSSL 1.0.2o)
Using better random generators
Removed direct FTP support, command execution has been enhanced and examples are provided so that it's possible to upload with any command line tool
To enforce security removed the possibility to delete recordings from the web interface
Removed the possibility to hide the toolbars because they provide important commands not available elsewhere
Removed the possibility to hide the statusbar because it notifies about important issues like buffer shortage

[close]

http://www.contaware.com/
Titel: iSpy 7.1.3.0
Beitrag von: SiLæncer am 14 September, 2018, 12:00
Whats new: >>

Updated ONVIF support

http://www.ispyconnect.com/
Titel: ContaCam 9.0.1
Beitrag von: SiLæncer am 20 September, 2018, 06:00
Changelog

- Fixed the HTTP header fields parser to allow any number of
  spaces after the colon (also 0 spaces like used by Foscam)
- Translations done
- Re-added the possibility to delete recordings from the web
  interface

[close]

http://www.contaware.com/
Titel: iSpy 7.1.4.0
Beitrag von: SiLæncer am 22 September, 2018, 10:00
Whats new: >>

Fix file size and cpu issue

http://www.ispyconnect.com/
Titel: ContaCam 9.0.3
Beitrag von: SiLæncer am 01 Oktober, 2018, 17:00
(http://images.six.betanews.com/screenshots/1305093715-1.gif)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- Updated Tabs and bottom-right popup Message Box fonts
- Merged the "Snapshots as daily history video" usage into the "Motion detection surveillance" usage

[close]

http://www.contaware.com/
Titel: iSpy 7.1.6.0
Beitrag von: SiLæncer am 13 Oktober, 2018, 11:30
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fix high cpu with saving audio files
Fix issue with opening mp3 files in web browser

http://www.ispyconnect.com/
Titel: Security Camera Viewer 5.2
Beitrag von: SiLæncer am 24 Oktober, 2018, 05:00
(https://i.postimg.cc/FKcztkps/screenshot-745.png)
A straightforward video surveillance software with motion detection and video recording functions for Close-circuit security cameras.

Freeware

https://www.sc-software.net/products/all/security-camera-viewer.html
Titel: iSpy 7.1.7.0
Beitrag von: SiLæncer am 25 Oktober, 2018, 18:00
Whats new: >>

Add velocity spaces to ONVIF
Updates to local server

http://www.ispyconnect.com/
Titel: iSpy 7.1.8.0
Beitrag von: SiLæncer am 26 Oktober, 2018, 05:30
Whats new: >>

Fix high CPU on JPEG feeds
Fix bug with attaching images to emails when camera is not responding

http://www.ispyconnect.com/
Titel: IP Camera Viewer 4.07
Beitrag von: SiLæncer am 06 November, 2018, 19:01
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: ContaCam 9.0.5
Beitrag von: SiLæncer am 08 November, 2018, 18:00
Changelog

- Support additional Generic RTSP devices
- Increased the rtsp/udp receiving buffer size from 1 MB to 10 MB
- Building the application with LARGEADDRESSAWARE set to have up to
  the double of address space
- Added support for flipping video horizontally and vertically
  (rotating by 180° can be achieved by enabling both flips)
- Scheduler is now only for the recordings and not for the
  snapshots (scheduling for the snapshots can be achieved with
  a batch script executed on snapshot)
- Do not revert snapshot thumb size and rate in Camera Basic
  Settings dialog

[close]

http://www.contaware.com/
Titel: Xeoma 18.11.21
Beitrag von: SiLæncer am 22 November, 2018, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Added a new “Object Recognizer” module. The module can automatically classify objects in the camera field of view (person, car, animal, bird, motorcycle, etc.) and respond – or ignore – to selected types of objects. “Object Recognizer” is ideal in environments where there is movement expected in the field of view, and you need the system to respond (or not respond) only to a certain type of object. The module is available for testing only in the trial version of the program.
Added a new “Face Detector (Emotions)” module. The module can automatically recognize human emotions (happiness, fear, neutrality, sadness, etc.) in faces appearing in the camera frame, and display them on the screen, save to a spreadsheet report or send to a third-party program for processing. It can also be used as an alternative to the current Face Detector for detection of faces (but not recognition), or in conjunction with it, for example, to determine the emotions only of known or unknown persons. The module is available for testing only in the trial version of the program.
Xeoma Pro: ANPR. Added the ability to run a search for numbers directly from the log of found license plates.
Xeoma Pro: Added the ability to record multiple audio tracks from several microphones for the same video stream (available for recordings in in the .xem format);
Xeoma Pro: Added the ability to export video with sound recording from several microphones (multi-channel sound) in the exported file.
Xeoma Pro: Added the ability to edit module settings using the JSON API. Now you can change settings of Xeoma modules and manage them from automation systems. Read more
Xeoma Pro: Added presets and automatic patrol for PTZ cameras with support for ONVIF. Now you have the opportunity to set up certain positions (“presets”) for ONVIF-compliant PTZ cameras, and establish a route of a “guard tour”. This way the camera will rotate automatically along the configured “tour”. Watch the video, read the article.
Android: a new client-only app is released. It doesn’t require permissions as the server+client version does. Now you have the choice to download either only a client Xeoma Android app to connect to your remote Xeoma server, or a full (server and client) app in one. Available for download on our site or from Google Play.
Optimized hardware acceleration and increased decoding speed on video cards using CUDA, including support for decoding h265-formats.
Improved rewriting archives for the option “Always leave free space” in the “Preview and Archive” module. Implemented an even removal of all archives by days.
Improved operation of the “Object Detection” module in conjunction with the “Cross-Line Detector” module. Now people walking near each other are detected separately correctly.
Optimized buffering option: the option will be turned off by default for new installations. If you’re updating from an older version where buffering has been enabled, it will stay enabled. Buffering should be enabled when smoother realtime viewing is required. The option can be selected in the “Layouts” menu (setting for client/server) or in the “Universal Camera” module settings (for separate cameras). A higher RAM load and image delay – as compared to image in camera admin page – are to be expected when the option is engaged.
ANPR: Added support for iANPR version 1.793 in ARM versions. Better recognition accuracy and new features for recognition of CIS license plate numbers.
ANPR: Added support for the new openALPR version for Windows. In it, the plates of the following countries are recognized: Argentina, Brazil, China, Indonesia, India, Japan, Thailand, South Africa, Saudi Arabia.
Fixed false triggering of motion detection when the camera switches from day/night mode.
Added the ability to go to the license reset page straight from the program interface.
Added the ability to select the speed of rotation and zoom for PTZ cameras that support ONVIF.
Repeater: improved connection speed, activation, display statistics, and added support for changed port of the Xeoma-server.
Marking: Improved overlaying of custom text (subtitles) in h264/h265 recordings.
Added support for video streams from Verint S1708e and S1808e decoders.
Multi-server mode: added the ability to edit the already added servers. Find this new option in the multi-server mode settings dialog.
Added the -starservice and -stopservice console keys for starting and stopping the Xeoma server that has already been installed in autostart.
Added support for a new version of the library for working with the Arducam camera.
Added black and white mode support for the Arducam camera. Use the parameter FORMAT: [value1, value2].
“HTTP marking”: Fixed a problem with possible loss of parameters when applying the HTTP marking.
“HTTP Requests Sender”: Fixed sending of a test request when clicking the “test” button.
Fixed program activation on new Ubuntu OSes (17.04 and up).
Fixed activation issues and false determination of settings when transferring to a physical machine from a virtual one.
Fixed incorrect display of dates in the calendar when viewing multiple archives at once.
Improved playback of the H264 archive in the browser.
Fixed crash in the “HTTP Switcher” module.
Fixed bug with updating the image in archive when dragging the time scale slider.
Fixed activation error on Linux OS without ifconfig utility.
Removed possible distortions when decoding h265 stream from the camera on the client.
Fixed launch error on devices with Exynos4412 Prime processor.

[close]

http://felenasoft.com/
Titel: ContaCam 9.0.7
Beitrag von: SiLæncer am 27 Dezember, 2018, 19:00
Whats new:>>

- The web interface full screen image maintains the aspect ratio (not supported by IE)
- Store the temporary daily summary snapshots in a subfolder
- Removed the possibility to have "snapshot each" under 1 second

http://www.contaware.com/
Titel: ContaCam 9.0.9
Beitrag von: SiLæncer am 19 Februar, 2019, 05:30
Whats new:>>

The web interface full screen live snapshot image can now be configured to either maintain the aspect ratio or to fully stretch. Do not adapt the frame time font size when the DPI changes, this because connecting through RDP can modify the DPI automatically. Possibility to display the system uptime in each frame
Updated internal web server to Apache 2.4.38 and PHP 5.6.40with INVALID_HANDLE_VALUE patch discussed in PHP bug #77580
Apache and PHP both with OpenSSL 1.0.2q)

http://www.contaware.com/
Titel: Xeoma 19.2.18
Beitrag von: SiLæncer am 19 Februar, 2019, 13:30
Changelog

Extra module: Added new module “FaceID”. This module recognizes human faces in camera image and compares them to faces from database (a remote LDAP database or a database stored on the same machine). This module only works if connected after the QR Code Recognition or Smart Card Reader modules. QR Code Reader or Smart Card Reader get information about person’s ID and send this meta data to FaceID that searches the database for the person’s face with this information. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “QR Code recognition”. The QR Code Recognition module is a filter module that scans the camera picture for QR code and when finds one, sends the video signal further along the scheme. This module is usually used in chain before the FaceID module which can compare face in camera view with a face of the person identified by that QR code. The module also works with the “Application Runner” module where it can send information about the QR code using the %TEXT% macro. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “SmartHome – RIF+”. This module works with RIF+ automation devices. Various sensors can be connected to the device, and the module can receive their alarms. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “Smart-card reader”. The module receives information about the card holder from Omnikey access card readers and passes it further along the chain to the FaceID module to compare the photo from the database with the face of the person in front of the camera. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. The module also works with the “Application Runner” module where it can send information about the access card using the %TEXT% macro. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Camera-Embedded Detector”. This module can use the built-in detectors and sensors of IP cameras that support the ONVIF protocol, as well as send commands to the camera. With this module in use, you can configure analytics rules in your camera, and stop using Xeoma detectors thus shifting some of the server load to the camera side. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Moving to PTZ preset“. When this module received alarms from previous modules in the chain, it can move a selected camera to a pre-defined position. The camera must support PTZ controls though ONVIF protocol. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Added the ability to search for a person through archive recordings by uploading a photo. The search can be performed in archive recordings of one camera or several at once. To start the search, go to the built-in Xeoma archive viewer’s menu, select the Search by photo option, and upload the photo for search from your device. The function is especially in demand in the “Safe City” systems, in the search for missing or wanted people, as well as in commercial areas when investigating incidents. This feature is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma: the search will yield only one latest incident where this person (face) was detected.
Added search through archive recordings by object types for the previously released Extra module “Object Recognition”. Find this option in the Xeoma Archive Viewer menu. If object visualization is enabled, the recognized objects will also be visualized.
PRO: Added the long-awaited synchronization of archives with the SD card of an IP camera that supports the ONVIF protocol. If the connection with such a camera is interrupted for a while, the recording of events will continue to the camera’s memory card, and after the connection is restored, this missing segment will be downloaded from the camera’s video storage to the Xeoma archive. It works only with ONVIF cameras. Configure this feature in the “Preview and Archive” module settings.
PRO: Added failover (server backup) for the Xeoma Pro Your Cloud mode. Before this improvement you could do that with system tools. Now there’s the built-in Xeoma feature for such “hot” and “cold” servers. See more about Failover here.
PRO: Added LDAP support for devices under ARM architecture. Now all the advantages of active directories can be used on ARM devices like Raspberry, too.
PRO: License Plate Recognition: added the ability to set the number of frames the iANPR utility has to process. If it is not possible to limit the maximum speed of the traffic flow, this new setting, if used properly, can help avoid blurred frames, and thus aid in higher successful number recognition rate.
PRO: Improved search for license plates: now you can run the search through archive recordings for a license number directly from the ANPR log of recognized license plates.
PRO: Xeoma Pro Your Cloud: added the option to limit number of user-created interactive E-Maps.
Added the ability to automatically place active cameras (cameras with triggered detectors) in a separate tab. Try this option in the menu “Layouts” -> “Manage layouts” -> “Larger grid mode” -> “Show only active cameras”. This innovation will allow you to use one of the monitors for displaying streams from cameras where alarm events occurred. The camera disappears from this tab in 10 seconds after the alarm event is finished.
Added long-awaited export of the archive in the timelapse form. Now you can specify the desired speed (frame rate) of the resulting piece before the export starts. This faster playback timelapse effect will help you quickly evaluate what happened outside the Xeoma Archive Viewer. If viewed in the Xeoma’s Archive Viewer, you can use the flexible playback speed to achieve the timelapse effect. This effect is widely popular for visualizing long processes: for monitoring of building erection, or in the scientific fields for watching over plant growth, chemical reactions, etc.
Added digital zoom for moving objects. Now, even if your camera does not have the PTZ (pan-tilt-zoom) functions, you can use the ability to automatically track objects or people in the field of view of the camera. Find this option in Main menu -> “Zoom” -> “Automatic objects tracking”. If there are several objects in the frame, the automatic tracking still works flawlessly and monitors the largest object.
Added the ability to display a high resolution stream when viewing all cameras – including on mobile devices. Turn this smart option on in “Layouts” -> “Client decoding settings” -> “Video decoding on the client side for live preview”) and select the settings that suit you and your device best with the slider below.
Multi-server mode: added the ability to use digital zoom. Now you can zoom in on the parts of a camera image in real-time and in the archive, even if you are connected to several servers at once.
Added the ability to download CSV reports from the server via client connection. Now you can get reports from smart modules wherever you are, even if you are connected to the server remotely. Perfect for verticals where mobility and fast assessing of work results is important; for those who want to have access to information anytime, anywhere.
Problem Detector: Added new camera defocus option. Now the program can automatically notify you when camera is out of focus suddenly. This new feature is a great addition for stand-alone systems that work for months without human supervision.
Added support for cameras that use the PSIA protocol, an ONVIF equivalent, which ensures successful synchronization of devices from different manufacturers within a unified system.
Added export of still pictures in PNG and BMP formats (in addition to previously available JPEG). Now you can export a snapshot of the archive recording in these common formats right from the archive viewer
Added the ability to assign access rights to groups of cameras. Ideal for systems with hundreds of cameras. Now you do not need to manually set the access rights to each camera separately. You can divide cameras into groups on any basis (for example, by their geo location) and assign rights to new and old operators to this or that set of cameras. Look for this option in the Main Menu -> Remote Access -> Users.
Added the ability to copy layouts and tabs from one client to another. Now you can share your tabs and camera order configuration with other users of your video surveillance system. Save it to a file and upload it for any other account through the Layouts menu.
Added the ability to prohibit users to change camera order, leaving the possibility to set camera order only to the administrator. Search for this feature in Main Menu -> Remote Access -> Users.
Increased efficiency of sending JPEG images with the %JPEG% ({JPEG}) macro due to getting rid of unnecessary coding.
Added new archive playback speeds. Now you can view your archives 60 and even 900 times faster. Suitable for systems with a lot of records to watch really quickly.
Added support for two options of overwriting the archive: by calendar days and by actual content. In the first case, the old recordings will be overwritten by new ones, for example, after 7 days have passed since the recording date, even if less recordings were made actually (for example, if motion detection was used). In the second case, the actual filling of the archive will be considered: the records will be overwritten, for example, when there are 7 days-worth of actual records stored.
Added the ability to request test licenses of the program directly from its interface.
Free rebranding: Added the ability to fill in the list of servers for clients to connect to with the <ServersFileName> parameter. Use this option to provide operators with a customized version of Xeoma with a list of servers to connect to already filled-in.
Added the ability to edit created PTZ tours. Learn more about PTZ presets and guard/patrol tours here.
Also, these issues were fixed:
Fixed possible crash when using webrtc in Xeoma Pro Your Cloud.
Fixed problem with recording archives in case of problems with the database.
Fixed possible failure of the client part when CUDA hardware acceleration is engaged.

[close]

http://felenasoft.com/
Titel: Xeoma 19.3.7 Beta
Beitrag von: SiLæncer am 07 März, 2019, 17:00
Changelog

Extra module: Added new module “FaceID”. This module recognizes human faces in camera image and compares them to faces from database (a remote LDAP database or a database stored on the same machine). This module only works if connected after the QR Code Recognition or Smart Card Reader modules. QR Code Reader or Smart Card Reader get information about person’s ID and send this meta data to FaceID that searches the database for the person’s face with this information. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “QR Code recognition”. The QR Code Recognition module is a filter module that scans the camera picture for QR code and when finds one, sends the video signal further along the scheme. This module is usually used in chain before the FaceID module which can compare face in camera view with a face of the person identified by that QR code. The module also works with the “Application Runner” module where it can send information about the QR code using the %TEXT% macro. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “SmartHome – RIF+”. This module works with RIF+ automation devices. Various sensors can be connected to the device, and the module can receive their alarms. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “Smart-card reader”. The module receives information about the card holder from Omnikey access card readers and passes it further along the chain to the FaceID module to compare the photo from the database with the face of the person in front of the camera. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. The module also works with the “Application Runner” module where it can send information about the access card using the %TEXT% macro. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Camera-Embedded Detector”. This module can use the built-in detectors and sensors of IP cameras that support the ONVIF protocol, as well as send commands to the camera. With this module in use, you can configure analytics rules in your camera, and stop using Xeoma detectors thus shifting some of the server load to the camera side. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Moving to PTZ preset“. When this module received alarms from previous modules in the chain, it can move a selected camera to a pre-defined position. The camera must support PTZ controls though ONVIF protocol. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Added the ability to search for a person through archive recordings by uploading a photo. The search can be performed in archive recordings of one camera or several at once. To start the search, go to the built-in Xeoma archive viewer’s menu, select the Search by photo option, and upload the photo for search from your device. The function is especially in demand in the “Safe City” systems, in the search for missing or wanted people, as well as in commercial areas when investigating incidents. This feature is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma: the search will yield only one latest incident where this person (face) was detected.
Added search through archive recordings by object types for the previously released Extra module “Object Recognition”. Find this option in the Xeoma Archive Viewer menu. If object visualization is enabled, the recognized objects will also be visualized.
PRO: Added the long-awaited synchronization of archives with the SD card of an IP camera that supports the ONVIF protocol. If the connection with such a camera is interrupted for a while, the recording of events will continue to the camera’s memory card, and after the connection is restored, this missing segment will be downloaded from the camera’s video storage to the Xeoma archive. It works only with ONVIF cameras. Configure this feature in the “Preview and Archive” module settings.
PRO: Added failover (server backup) for the Xeoma Pro Your Cloud mode. Before this improvement you could do that with system tools. Now there’s the built-in Xeoma feature for such “hot” and “cold” servers. See more about Failover here.
PRO: Added LDAP support for devices under ARM architecture. Now all the advantages of active directories can be used on ARM devices like Raspberry, too.
PRO: License Plate Recognition: added the ability to set the number of frames the iANPR utility has to process. If it is not possible to limit the maximum speed of the traffic flow, this new setting, if used properly, can help avoid blurred frames, and thus aid in higher successful number recognition rate.
PRO: Improved search for license plates: now you can run the search through archive recordings for a license number directly from the ANPR log of recognized license plates.
PRO: Xeoma Pro Your Cloud: added the option to limit number of user-created interactive E-Maps.
Added the ability to automatically place active cameras (cameras with triggered detectors) in a separate tab. Try this option in the menu “Layouts” -> “Manage layouts” -> “Larger grid mode” -> “Show only active cameras”. This innovation will allow you to use one of the monitors for displaying streams from cameras where alarm events occurred. The camera disappears from this tab in 10 seconds after the alarm event is finished.
Added long-awaited export of the archive in the timelapse form. Now you can specify the desired speed (frame rate) of the resulting piece before the export starts. This faster playback timelapse effect will help you quickly evaluate what happened outside the Xeoma Archive Viewer. If viewed in the Xeoma’s Archive Viewer, you can use the flexible playback speed to achieve the timelapse effect. This effect is widely popular for visualizing long processes: for monitoring of building erection, or in the scientific fields for watching over plant growth, chemical reactions, etc.
Added digital zoom for moving objects. Now, even if your camera does not have the PTZ (pan-tilt-zoom) functions, you can use the ability to automatically track objects or people in the field of view of the camera. Find this option in Main menu -> “Zoom” -> “Automatic objects tracking”. If there are several objects in the frame, the automatic tracking still works flawlessly and monitors the largest object.
Added the ability to display a high resolution stream when viewing all cameras – including on mobile devices. Turn this smart option on in “Layouts” -> “Client decoding settings” -> “Video decoding on the client side for live preview”) and select the settings that suit you and your device best with the slider below.
Multi-server mode: added the ability to use digital zoom. Now you can zoom in on the parts of a camera image in real-time and in the archive, even if you are connected to several servers at once.
Added the ability to download CSV reports from the server via client connection. Now you can get reports from smart modules wherever you are, even if you are connected to the server remotely. Perfect for verticals where mobility and fast assessing of work results is important; for those who want to have access to information anytime, anywhere.
Problem Detector: Added new camera defocus option. Now the program can automatically notify you when camera is out of focus suddenly. This new feature is a great addition for stand-alone systems that work for months without human supervision.
Added support for cameras that use the PSIA protocol, an ONVIF equivalent, which ensures successful synchronization of devices from different manufacturers within a unified system.
Added export of still pictures in PNG and BMP formats (in addition to previously available JPEG). Now you can export a snapshot of the archive recording in these common formats right from the archive viewer
Added the ability to assign access rights to groups of cameras. Ideal for systems with hundreds of cameras. Now you do not need to manually set the access rights to each camera separately. You can divide cameras into groups on any basis (for example, by their geo location) and assign rights to new and old operators to this or that set of cameras. Look for this option in the Main Menu -> Remote Access -> Users.
Added the ability to copy layouts and tabs from one client to another. Now you can share your tabs and camera order configuration with other users of your video surveillance system. Save it to a file and upload it for any other account through the Layouts menu.
Added the ability to prohibit users to change camera order, leaving the possibility to set camera order only to the administrator. Search for this feature in Main Menu -> Remote Access -> Users.
Increased efficiency of sending JPEG images with the %JPEG% ({JPEG}) macro due to getting rid of unnecessary coding.
Added new archive playback speeds. Now you can view your archives 60 and even 900 times faster. Suitable for systems with a lot of records to watch really quickly.
Added support for two options of overwriting the archive: by calendar days and by actual content. In the first case, the old recordings will be overwritten by new ones, for example, after 7 days have passed since the recording date, even if less recordings were made actually (for example, if motion detection was used). In the second case, the actual filling of the archive will be considered: the records will be overwritten, for example, when there are 7 days-worth of actual records stored.
Added the ability to request test licenses of the program directly from its interface.
Free rebranding: Added the ability to fill in the list of servers for clients to connect to with the <ServersFileName> parameter. Use this option to provide operators with a customized version of Xeoma with a list of servers to connect to already filled-in.
Added the ability to edit created PTZ tours. Learn more about PTZ presets and guard/patrol tours here.

Also, these issues were fixed:

Fixed possible crash when using webrtc in Xeoma Pro Your Cloud.
Fixed problem with recording archives in case of problems with the database.
Fixed possible failure of the client part when CUDA hardware acceleration is engaged.

[close]

http://felenasoft.com/
Titel: Xeoma 19.3.18 Beta
Beitrag von: SiLæncer am 19 März, 2019, 17:00
Whats new:>>

Enhanced work with new Additional modules.

http://felenasoft.com/
Titel: Perfect IP Camera Viewer 4.6
Beitrag von: SiLæncer am 24 März, 2019, 21:00
(https://s26.postimg.cc/tl98yxg7d/screenshot_1108.png)
Perfect IP Camera Viewer allows you to create a professional video surveillance system on your computer in minutes.

Freeware

Whats new:>>

Privacy mask.
Video effects.
Bug fixes.

www.perfect-surveillance.com
Titel: Xeoma 19.3.21 Beta
Beitrag von: SiLæncer am 02 April, 2019, 12:22
Whats new:>>

Fixed some bugs, enhanced stability

http://felenasoft.com/
Titel: Security Camera Viewer 6.0
Beitrag von: SiLæncer am 08 April, 2019, 19:00
(https://i.postimg.cc/FKcztkps/screenshot-745.png)
A straightforward video surveillance software with motion detection and video recording functions for Close-circuit security cameras.

Freeware

https://www.sc-software.net/products/all/security-camera-viewer.html
Titel: ContaCam 9.5.0
Beitrag von: SiLæncer am 21 April, 2019, 11:03
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- The daily summary video creation is now configurable under
  Camera Basic Settings
- Fixed download problems for daily summary videos
- Increased the download performance of thumbnails and videos
- Updated the "Network / IP Camera" dialog to show also the assigned
  camera name in the "Camera IP or Address" drop down list
- Support Sumpple RTSP cameras

[close]

http://www.contaware.com/
Titel: iSpy 7.2.0.0
Beitrag von: SiLæncer am 30 April, 2019, 09:04
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Bug fixes
Fix issue with channel swap when using VLC 3+
Update ffmpeg version

http://www.ispyconnect.com/
Titel: iSpy 7.2.1.0
Beitrag von: SiLæncer am 29 Mai, 2019, 12:11
Whats new: >>

Rollback ffmpeg update
Updated translations and ptz

http://www.ispyconnect.com/
Titel: ContaCam 9.7.0
Beitrag von: SiLæncer am 20 Juni, 2019, 06:00
Whats new:>>

- In web interface showing start time if hovering over small videos
- Reload web page with no parameters if today selected
- Small fixes

http://www.contaware.com/
Titel: ContaCam 9.9.0
Beitrag von: SiLæncer am 09 Oktober, 2019, 09:07
Changelog

    Better support for high contrast themes
    Frame Annotation possibility with the new toolbar button
    More intuitive detection zones/mask toolbar button. Single zones
    changes are now saved immediately
    Configurable frame interval for the daily summary video
    Removed the rudimentary scheduler in favour of a more flexible way
    to control ContaCam through the Windows Task Scheduler
    Added example buttons for typical external commands
    Web interface multiple selection deletion(sponsored by Grün Stadt Zürich)
    The web interface video player was enhanced with a 2.0x play speed
    In web interface we have now only one camera source obscure button (like in ContaCam program)
    Updated installer with an improved closing logic for Apache server
    Added a new Generic IP camera entry
    Fixed mjpeg support for the MotionEyeOS camera (thanks to Dave Smith for reporting the problem and helping find the bug)

[close]

http://www.contaware.com/
Titel: ContaCam 9.9.1
Beitrag von: SiLæncer am 11 Oktober, 2019, 05:00
Whats new:>>

- Fixed a bug which prevented the Camera Basic Setting dialog
  to set the correct sensitivity for the chosen usage

http://www.contaware.com/
Titel: ContaCam 9.9.3
Beitrag von: SiLæncer am 23 November, 2019, 19:00
Whats new:>>

- New CAMERA.bat batch file to control the camera source on/off state
- Daily summary video will not record black frames when source is off
- Added a recording start picture saving checkbox
- Http multipart parser is more fault tolerant
  (fixes VLC multipart streaming)
- New %name% command execution variable containing the camera name
- Support Floureon, JideTech and Wyze RTSP cameras

http://www.contaware.com/
Titel: Xeoma 19.11.26
Beitrag von: SiLæncer am 09 Dezember, 2019, 17:00
Changelog

    Additional module: added new module “Sports Tracking”. This module is used for recognition and automated PTZ tracking of a ball in various sport games. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Gender Recognition“. This module is based on Artificial Intelligence and enables automatic recognition of a person’s gender, and reaction to either male, female, or both genders. Ideal for retail stores where promo ads or notifications can be adjusted based on a visitor’s gender for higher sales rates. You can select to which gender the system will react, and set the desired accuracy level to get rid of episodes where the system is less sure of recognition quality. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Color Recognition”. This module is triggered when it detects the selected color in the specified area in real time. Choose a color for detection from the suggested basic ones or input a color in the RGB or HSV color scheme. Use the Sensitivity threshold slider to allow detection of undertones of a selected range. Paint the area where color should be monitored in red with a brush. Areas not marked in red will be ignored when searching for colors. Select the “Analyze only the changing areas” to ignore static objects in camera image (the module will look for moving objects only then). You will need a “Motion Detector” module in the chain before module if you want to use this feature. The module is designed for independent work to intercept an object by a color, or to work in conjunction with other modules like License Plate Recognizer, for example, detecting violations of traffic rules in combination with a traffic light (detection of drivers ignoring the red signal). This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Crowd detector”. This module is based on Artificial Intelligence networks and can count people’s heads and detect if the number is bigger or smaller than needed (detect people crowding), and cause a pre-set reaction. It can also be used for passengers count in a public transportation enclosure like subway carriage, bus, tram, train, etc. You can select how many people should be there in the camera’s field of view to trigger the module. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional license: new countries with improved accuracy of license plate identification have been added for the “ANPR” module. These countries are: Armenia, Belarus, Georgia, Uzbekistan, Russia and Kazakhstan. For the module to work, additional components need to be downloaded (done automatically). License for this newly added functionality is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    The previously added additional module “Object Recognition” does not need the “Object Detector” module to work any more; the module works independently now.
    New types of objects added to the additional module “Object recognition”. Now the module can recognize boats, buses, sport balls, trains, trucks.
    Additional module “Object Recognition” now offers possibility to select recognition interval, which allows to reduce the load on weak processors, while losing an insignificant part of possible episodes with this object type in the frame.
    Additional module “Object Recognition” now offers the possibility to select the desired recognition accuracy level for each type of object separately. Now you can flexibly set what percentage of recognition accuracy suits you for type of object. For example, when you need more accuracy for recognition of cars of various form-factors, and lower accuracy is enough for the lower-priority task of recognizing people.
    Additional module “QR Code Recognition” now can recognize bar codes of all known formats (code-128, code-39, code-93, EAN-13, EAN-8, ITF, PDF-417, RSS expanded and others), in addition to QR codes.
    “Face Recognition“: new option “Auto-learning by found faces” added for recognition using the artificial intelligence option. This functionality allows you to automatically train the program to include detected people in a particular group by frequency of detection (for example, employees, loyal visitors, new guests, etc.).
    Additional module “Move to PTZ preset” now has the possibility to setup the tour (patrol) mode for ONVIF cameras that support touring, directly from the module’s interface.
    Additional module “Move to PTZ preset” now offers the possibility to select the module to which the signal is transmitted when the selected preset is triggered is added. Thus, in one module “Move to PTZ preset”, you can configure various presets and determine to which of the following modules the signal from each will be transmitted.
    PRO: added detection of speed limit violation. The combination of the new PRO modules “ANPR Speed Sender” and “ANPR Speed ​​Receiver” calculates the time that a vehicle takes to travel the distance between two virtual points, and if it’s lower than a set time, the module is triggered. More details
    PRO: the “ANPR” module now offers visualization of the license plate location on preview. With this feature it will be more convenient to configure the module to work together with other modules – for example, with the “Cross-Line Detector” or “PTZ Tracking”.
    PRO: the “ANPR Sending to FTP” module now offers the ability to choose what pictures to send (either a frame with a machine, or a frame with a license plate, or both), whether to send this data in archive or as separate files, and also to select the sending/saving interval.
    PRO: Added support for USB joysticks for PTZ control (Windows only).
    Added support for working with GlobalSat GPS modules (in modules “Marking” and “ANPR Speed Sender”).
    Universal camera: added the ability to select a PTZ (pan-tilt-zoom) profile. This functionality is needed for operation of several PTZ cameras connected via NVR.
    Universal camera: added the ability to configure ONVIF camera streams directly from the Xeoma interface. Now you can change the resolution, stream type, frames-per-second rate, brightness, contrast, sharpness, and other parameters of the streams that the ONVIF camera allows to change through the ONVIF protocols, right from the “Universal Camera” dialog. All settings are available for the ONVIF cameras automatically.
    Universal camera: added the ability to limit FPS (frames per second rate) of a USB camera’s video stream (previously the FPS option could only be selected in conjunction with resolution).
    Added the ability to import/export customized tabs for transferring them to other clients.
    Added the ability to synchronize the ONVIF cameras time with the server’s time. With this option, your ONVIF cameras connected to Xeoma will be automatically reconfigured to the server’s system time.
    The “Display only active cameras” option now has the ability to select the time the cameras are displayed for (5, 10, 30 seconds, 1, 2, 5 minutes).
    Users Dialog: added option to allow or prohibit users listening to sound from cameras.
    Users Dialog: added option to allow or prohibit users viewing interactive maps eMap.
    The “Active licenses” information (Main menu – Information – Active Licenses) now has the ability to remove previously activated licenses so that you could delete mistakenly activated licenses and transfer them to other equipment. This is especially important for virtual machines.
    Added the option for simultaneous export of archives that are viewed in the multi-archive viewing mode.
    Added new “programdir [DirPath]” program startup key. Running Xeoma with this key will allow you to change the storage location of the program files without installation.
    Motion Detector: added the “Ignore shadows” option. This functionality allows you to reduce false positives by shadows of various objects.

    Improvements:

    -“Universal camera”: added automatic selection of the “Decoding of key frames” option which allows you to determine the number of key frames in the stream and only reduces them to decode the processor of the server.
    -Added new “-archivecache [DirPath]” console parameter. This parameter allows the system to use a folder for temporary storing of archive recordings files until they are fully recorded. Using this parameter allows to significantly reduce disk fragmentation and therefore the load on it. Useful for a large number of cameras.
    -Optimization of work with massive archive recordings.
    -Optimization of work with a client with a large number of cameras on a weak computer. To maintain performance, the frames-per-second rate is lowered in the Main Window (Multi-Camera View).
    -Faster display of cameras at the first launch or when switching from tab to tab with a large number of cameras

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.5
Beitrag von: SiLæncer am 19 Dezember, 2019, 14:00
Changelog

- Video saving speed adapts itself to the available system resources
- Optimized small video (animated gif) creation and play time
- Bottom toolbar menus must not cover their own buttons

[close]

http://www.contaware.com/
Titel: Netcam Studio 1.8.1.0
Beitrag von: SiLæncer am 27 Dezember, 2019, 12:00
(https://i.postimg.cc/HWJ513b1/screenshot-2249.png)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

http://www.netcamstudio.com/
Titel: Security Eye 4.6
Beitrag von: SiLæncer am 06 Januar, 2020, 19:00
(https://s26.postimg.cc/ieo2ml6x5/screenshot_120.png)
Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freemium

Whats new:>>

Audio support. Import/export cameras. New languages.

http://security-eye-software.com/
Titel: IP Camera Viewer 4.09
Beitrag von: SiLæncer am 08 Januar, 2020, 18:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freemium

http://www.deskshare.com/
Titel: Netcam Studio 1.9.0.0
Beitrag von: SiLæncer am 23 Januar, 2020, 19:00
Changelog

    Updated OpenCV to 4.2.0
    Support for Hardware/GPU accelerated recording (Intel, AMD, Nvidia)
    Support for D3DVA11 Hardware/GPU accelerated decoding (Now possible when running as Service)
    Possibility to selected between Constant Frame Rate or Variable Frame Rate (Smaller files, less CPU) recording
    Reduced CPU usage when decoding JPEG/MJPEG streams
    Optimisations in H264 encoding for recording and live streaming
    Improved accuracy of the frame rate limiter
    Improved Bruce-Force detection to protect NCS from attacks
    Fixed some cases of Audio over HTTP which were not supported
    Fixed FTPS upload was not working with self-signed certificates and in some cases
    Fixed an issue with Point-to-Move functionality for PTZ cameras

[close]

http://www.netcamstudio.com/
Titel: ContaCam 9.9.7
Beitrag von: SiLæncer am 30 Januar, 2020, 20:00
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Supporting high DPI aware NSIS 3 (Nullsoft Scriptable Install System)
    In case that the camera framerate cannot be reduced there is a saving framerate divider parameter in Camera Advanced Settings dialog (removed the saving speed adaptation logic introduced in 9.9.5)
    Better support for Samsung cameras
    Web interface got a Back to Top button
    Removed Camera Basic Settings toolbar button as this command is already under the Settings menu

[close]

http://www.contaware.com/
Titel: ContaCam 9.9.8
Beitrag von: SiLæncer am 20 Februar, 2020, 17:00
Whats new:>>

    Web interface has got bigger buttons
    New statusbar pane which shows slowest saving speed
    Dropping frames when the available commit size gets low
    Fixed statusbar for high dpi devices

http://www.contaware.com/
Titel: Xeoma 20.2.13 Beta
Beitrag von: SiLæncer am 21 Februar, 2020, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Additional module: Car speed detector. This module works in combination with the ISKRA DA/40 hardware speed meter and the ANPR (License Plate Recognition) module and is able to determine speed of the car by correlating data from the radar, a photograph of the car and its recognized number. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required;
    Additional module: improved visualization in the “Object Recognition” module. Objects that don’t meet the set criteria for triggering will now not be highlighted;
    Additional module: the “Object Recognizer” module now can pass information about the detected object type to the “Sending Email” module. Use the %OBJECT% macro in the messages’ subject or body;
    Additional module: improved CSV reports for the “Face Detector (Emotions)“. Reports now have information about the detected emotion and how sure the AI is this is exactly that emotion (in percents);
    PRO: improved selection of archives for the simultaneous view. Now you can select multiple cameras that you’d like to view archive recordings for right on the page you’re in or any other page. Before the change, that was only possible for the ‘All Cameras’ page;
    PRO: For the ANPR module working with the new version of the openALPR utility added support for recognition of Malaysia and Singapore vehicle plates;
    PRO: browser view of H264/H265 streams (even in high resolution) with the WebRTC technology is now supported for Edge and Safari browsers;
    PRO: enhanced sound quality for browser view of H264/H265 streams (even in high resolution) with the WebRTC technology;
    New module “Object Size Filtering” (Xeoma Standard and up) will filter out objects detected by preceding filter modules by their height, width, or a combination of height and width. The module is perfect for work with modules that don’t posses such filter (like “Object Recognizer”) – for example, for reaction only to grown-ups based on their height or just to big birds (birds of prey);
    Added support for USB cameras under new macOS 10.15;
    Android: Xeoma’s app for Android OS now installs its own icon on Android TV’s main screen;
    Fixed processing of touches in the Android app under Android 10;
    Requested by our Netherlands partner, even the latest archive recordings of H264/H265 streams are finalized and available for view when the “Jump to the end of archive” button in the archive viewer window is clicked;
    Web Server: Added simultaneous view of archive recordings in a browser by multiple clients. Formerly, only one cleint could view an archive at a time;
    Sending Email: media attachments are now available when the Screen Capture module is used as a source as well;
    Screen capture module now works for Xeoma installed to autostart;
    Fixed the direct saving to the archive for several cameras;
    PTZ Tracking is available in the Xeoma Standard edition again;
    Layouts: order of pages can now be changes;
    Layouts: “Show only active cameras” can now work also with the Problems Detector module;
    For rented licenses if the Internet connection is lost at one moment, the rent will be automatically restored when the Internet is back;
    Fixed crash of the client part at start at attempt to display the warning about insufficient rights.

[close]

http://felenasoft.com/
Titel: Home Security Camera 3.2
Beitrag von: SiLæncer am 02 März, 2020, 06:00
(https://i.postimg.cc/K8hST8NQ/screenshot-1619.png)
Free software for video surveillance. You no longer need to pay anything to the cloud service for video surveillance! The minimum delay is only 1 - 2 seconds when broadcasting from an IP camera

Freeware

http://free-video-surveillance.com/
Titel: Xeoma 20.2.13
Beitrag von: SiLæncer am 02 März, 2020, 17:00
Changelog

    Additional module: Car speed detector. This module works in combination with the ISKRA DA/40 hardware speed radar and the ANPR (License Plate Recognition) module and is able to determine speed of the car by correlating data from the radar, a photograph of the car and its recognized number. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required;
    Additional module: improved visualization in the “Object Recognition” module. Objects that don’t meet the set criteria for triggering will now not be highlighted;
    Additional module: the “Object Recognizer” module now can pass information about the detected object type to the “Sending Email” module. Use the %OBJECT% macro in the messages’ subject or body;
    Additional module: improved CSV reports for the “Face Detector (Emotions)“. Reports now have information about the detected emotion and how sure the AI is this is exactly that emotion (in percents);
    PRO: improved selection of archives for the simultaneous view. Now you can select multiple cameras that you’d like to view archive recordings for right on the page you’re in or any other page. Before the change, that was only possible for the ‘All Cameras’ page;
    PRO: For the ANPR module working with the new version of the openALPR utility added support for recognition of Malaysia and Singapore vehicle plates;
    PRO: browser view of H264/H265 streams (even in high resolution) with the WebRTC technology is now supported for Edge and Safari browsers;
    PRO: enhanced sound quality for browser view of H264/H265 streams (even in high resolution) with the WebRTC technology;
    New module “Object Size Filtering” (Xeoma Standard and up) will filter out objects detected by preceding filter modules by their height, width, or a combination of height and width. The module is perfect for work with modules that don’t posses such filter (like “Object Recognizer”) – for example, for reaction only to grown-ups based on their height or just to big birds (birds of prey);
    Added support for USB cameras under new macOS 10.15;
    Android: Xeoma’s app for Android OS now installs its own icon on Android TV’s main screen;
    Fixed processing of touches in the Android app under Android 10;
    Requested by our Netherlands partner, even the latest archive recordings of H264/H265 streams are finalized and available for view when the “Jump to the end of archive” button in the archive viewer window is clicked;
    Web Server: Added simultaneous view of archive recordings in a browser by multiple clients. Formerly, only one cleint could view an archive at a time;
    Sending Email: media attachments are now available when the Screen Capture module is used as a source as well;
    Screen capture module now works for Xeoma installed to autostart;
    Fixed the direct saving to the archive for several cameras;
    PTZ Tracking is available in the Xeoma Standard edition again;
    Layouts: order of pages can now be changes;
    Layouts: “Show only active cameras” can now work also with the Problems Detector module;
    For rented licenses if the Internet connection is lost at one moment, the rent will be automatically restored when the Internet is back;
    Fixed crash of the client part at start at attempt to display the warning about insufficient rights.

[close]

http://felenasoft.com/
Titel: Xeoma 20.4.10 Beta
Beitrag von: SiLæncer am 13 April, 2020, 18:00
Changelog

    Additional module: Added new module “Age Detector”. This module searches for faces in the frame and, based on the knowledge base, displays the estimated age of the person on the screen. If this specific age is in the selected range (specified by setting the maximum and minimum age for which a reaction is required), the module passes the video signal further down the chain to subsequent modules. The module can be used to collect statistical information, including in combination with other Xeoma video analytics modules. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in trial mode for 1 hour, then reconfiguration is required.
    Improved Additional module “Color Detector” – now it can work in combination with the “Face Recognition” module to detect the sought-for colors only in areas in which a face is found. This is relevant, for example, for the automatic fever detection in passengers at the airport. See more about Fever Detection in our PDF promo.
    Added the ability to restore settings to one of Xeoma’s automatic backups, right from the Xeoma interface. Now the “Settings Restore” menu allows you to rollback to a backup of settings – not only those made by you through the “Settings Restore” menu, but also from those that Xeoma does automatically.
    PRO: Improved face detection algorithms of the “Face Recognition” module. You will get a higher accuracy now for a more flawless system operation.
    Xeoma Pro Your Cloud: The EmailMinSendInterval parameter has been added to the user’s configuration files, which limits the interval for sending messages in the “Sending Email” module. Now you can strictly control how often Xeoma can send letters to subscribers.
    PRO: added the ability to choose which camera’s sound stream you’d like to listen to in the simultaneous view of multiple archives mode. This can be done using the familiar “Volume” icons that now appear when viewing multiple archives at once.
    PRO: For the “Cross-Line Detector” module added the ability to choose which type of counting to apply – one-directional (only those motion events that move in the selected direction) or two-directional (motion events that move in the selected direction and in the counter direction).
    PRO: Improved work with LDAP active directories in the Users dialog. Now it offers to get just a certain specified group of users from the LDAP server, instead of all groups. Also now even great numbers of LDAP users (over 2000) can be loaded into the Users Dialog.
    Module “Save to file”: added more macros. The %SPEED% macro can dynamically add the speed obtained from the module “Vehicle Speed ​​Detector” in the file name, and the %NUMBER% macro can add the recognized vehicle’s license plate number received from the module “ANPR“.
    “Users” dialog: added the ability to select either LDAP users or Xeoma users – previously both user groups were on the same list.
    FTP Receiver: JPEG files received through FTP are now stored in memory, rather than in temporary storage on disk as previously.
    Optimized traffic between cameras and server: improved mechanisms allowing to not get an unused stream from the camera.
    Web server: the PTZ control available in Xeoma web page has been complemented with the buttons to select PTZ presets and configure PTZ tours.
    Added startup key -archiveremovelog. The key allows you to write logs for archive deletion actions in Xeoma. This log file can be found and viewed in the Xeoma folder.
    Fixed a decrease in the frame rate of an IP camera’s video stream in the Single Camera View mode when a separate “Microphone” module is used in the chain.
    The operation of the “Object Detector” module has been improved – now small objects are also detected.
    Sending Email: fixed lack of prerecord in the video clips attached to letters.
    Fixed cameras image quality loss that used to appear when the Xeoma window was resized.
    Fixed the “segmentation fault” error when running Xeoma on armv8 processors.
    Fixed disappearance of “Face Recognition” module’s visualization in real-time preview.
    Built-in archive player: fixed an issue where if the playback is put on pause and the slider is moved along the timeline, the background picture doesn’t change.
    Improved error output when activating multiple licenses at once. Now you will receive information for each license.
    Improved export from the archive of short segments (lasting less than 5 seconds) of h264 videos.
    Fixed increased load on the processor when opening the “Universal Camera” module settings dialog.
    Fixed unavailability of webAPI commands on the first server startup. Now control via the API is available immediately after the first launch.
    Fixed reset of user-specified port in the Additional module “Move to PTZ preset” settings.
    Fixed issue of the program saving short videos at the program start from cameras in whose chain there is are filter modules in the “Not Skipping” mode.

[close]

http://felenasoft.com/
Titel: Xeoma 20.4.28
Beitrag von: SiLæncer am 30 April, 2020, 21:30
Changelog

    Improved Additional module “Color Detector” – now it can work in combination with the “Face Recognition” module to detect the sought-for colors only in areas in which a face is found. This is relevant, for example, for the automatic fever detection in passengers at the airport. See more about Fever Detection in our PDF promo.
    Added the ability to restore settings to one of Xeoma’s automatic backups, right from the Xeoma interface. Now the “Settings Restore” menu allows you to rollback to a backup of settings – not only those made by you through the “Settings Restore” menu, but also from those that Xeoma does automatically.
    PRO: Improved face detection algorithms of the “Face Recognition” module. You will get a higher accuracy now for a more flawless system operation.
    Xeoma Pro Your Cloud: The EmailMinSendInterval parameter has been added to the user’s configuration files, which limits the interval for sending messages in the “Sending Email” module. Now you can strictly control how often Xeoma can send letters to subscribers.
    PRO: added the ability to choose which camera’s sound stream you’d like to listen to in the simultaneous view of multiple archives mode. This can be done using the familiar “Volume” icons that now appear when viewing multiple archives at once.
    PRO: For the “Cross-Line Detector” module added the ability to choose which type of counting to apply – one-directional (only those motion events that move in the selected direction) or two-directional (motion events that move in the selected direction and in the counter direction).
    PRO: Improved work with LDAP active directories in the Users dialog. Now it offers to get just a certain specified group of users from the LDAP server, instead of all groups. Also now even great numbers of LDAP users (over 2000) can be loaded into the Users Dialog.
    Module “Save to file”: added more macros. The %SPEED% macro can dynamically add the speed obtained from the module “Vehicle Speed ​​Detector” in the file name, and the %NUMBER% macro can add the recognized vehicle’s license plate number received from the module “ANPR“.
    “Users” dialog: added the ability to select either LDAP users or Xeoma users – previously both user groups were on the same list.
    FTP Receiver: JPEG files received through FTP are now stored in memory, rather than in temporary storage on disk as previously.
    Optimized traffic between cameras and server: improved mechanisms allowing to not get an unused stream from the camera.
    Web server: the PTZ control available in Xeoma web page has been complemented with the buttons to select PTZ presets and configure PTZ tours.
    Added startup key -archiveremovelog. The key allows you to write logs for archive deletion actions in Xeoma. This log file can be found and viewed in the Xeoma folder.
    Fixed a decrease in the frame rate of an IP camera’s video stream in the Single Camera View mode when a separate “Microphone” module is used in the chain.
    The operation of the “Object Detector” module has been improved – now small objects are also detected.
    Sending Email: fixed lack of prerecord in the video clips attached to letters.
    Fixed cameras image quality loss that used to appear when the Xeoma window was resized.
    Fixed the “segmentation fault” error when running Xeoma on armv8 processors.
    Fixed disappearance of “Face Recognition” module’s visualization in real-time preview.
    Built-in archive player: fixed an issue where if the playback is put on pause and the slider is moved along the timeline, the background picture doesn’t change.
    Improved error output when activating multiple licenses at once. Now you will receive information for each license.
    Improved export from the archive of short segments (lasting less than 5 seconds) of h264 videos.
    Fixed increased load on the processor when opening the “Universal Camera” module settings dialog.
    Fixed unavailability of webAPI commands on the first server startup. Now control via the API is available immediately after the first launch.
    Fixed occasional crashes of the Camera-Embedded Detector module.
    Fixed issue of the program saving short videos at the program start from cameras in whose chain there is are filter modules in the “Not Skipping” mode.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.9
Beitrag von: SiLæncer am 03 Mai, 2020, 12:00
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Optimized camera preview
    Security enhancements for the web interface
    Main web interface index page has now the same button style
    as the other pages and has also a Back to Top button
    Web interface logout button is always the most left one
    Support for Srihome and older Zavio cameras
    Raised the email send timeout from 20 to 60 sec
    Avoid creating an empty previous day folder
    Removed the unnecessary red dot symbol showing in live snapshots (the created videos are already a feedback for recording)

[close]

http://www.contaware.com/
Titel: Xeoma 20.6.19 Beta
Beitrag von: SiLæncer am 22 Juni, 2020, 21:00
Changelog

    Age recognition: new Additional module “Age recognition” has been added. This module allows you to determine the age of people in the camera image in real time. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Detector of Construction Site Safety: new Additional module “Detector of Construction Site Safety” has been added. This module detects safety gear items in the frame that are critical for observing safety measures at a construction site: safety helmets and protective clothing (working uniform). This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Sound Events Detector: new Additional module “Sound Events Detector” has been added. It can recognize 5 types of sounds: glass breaking, car alarms, baby cries, screams and gunshots. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Mask Detector: new Additional feature has been added to the “Face Recognition” that automatically finds people in the camera frame and determines whether they have a medical mask on their faces or not. With the mask detector, you can use Xeoma notifications and reactions to quickly alert authorized personnel when people with or without medical masks are discovered. This feature is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Operation algorithms of the “FaceID” module for dual authorization have been improved. Now the module can distinguish whether there is a live person in front of the camera or just their photograph. This is done without use of any additional equipment in the new version while previously this could only have been achieved with special 3D cameras.
    Operation algorithms of the “Cross-Line Detector”, “Visitors Counter”, “Crowd Detector” modules have been improved. Now they have built-in artificial intelligence mechanisms that allow modules to identify objects more efficiently and accurately.
    Additional feature: a new macro %CROWD% has been added to the “Crowd Detector” module that allows to use results ​​from this module in other modules (for example, in the “Sending Email” module).
    PRO: added new module “My Detector” that allows you to use your own neural networks library for detection of events or objects. With it you can add and use your own intellectual module in the program.
    PRO: support for the third-party Platerecognizer utility has been added to the “ANPR”(license plate recognition) module. The utility offers a wide range of supported countries, affordable prices, and quick addition of new countries and types of license plates.
    PRO: improved work with active LDAP directories in the Users dialog. Support for the secure LDAPS certificate on Linux systems has been added.
    PRO: improved work with active LDAP directories in the Users dialog. The “test connection” button has been added for convenience.
    PRO: option to select the duration of sound playback is added in the “Sound Alarm” module for the option to playback the sound on the client side.
    PRO: The “Sound Alarm” module’s option to playback the sound on the client side is now also available in the multiserver mode.
    Improved work with hardware keys on virtual machines: now it is possible to add new licenses to a hardware key even if Xeoma is running on a virtual machine.
    Operation of the Universal Camera module has been improved: now the TCP protocol is used by default for camera streams which in most cases means a more stable picture without distortions.
    Web server: added support for IPv6 addresses.
    webAPI: a command to remove a camera has been added to the Xeoma web API.
    Web Server: the Xeoma Web server log has been improved – now the log also contains information about connection attempts with correct and incorrect passwords.
    Android: fixed an issue with invalid click coordinates on devices like Samsung Galaxy a30 in Xeoma’s Android app .
    Xeoma Pro Your Cloud: the ability to use the high resolution stream from the archive to be attached to emails has been added to the “Sending Email” module for the Xeoma Pro Your Cloud mode.
    Xeoma Pro Your Cloud: fixed the problem with installation of the Xeoma Pro Your Cloud server to autostart on Linux systems.
    PRO: fixed the issue with the “RTSP Translator” module when necessary files could not be unpacked completely.
    “Save to File”: fixed the issue where the module could create 0 bytes files if the frame rate of the camera stream had a value with a fraction (for example, 15.5).
    Fixed issue with the frame-by-frame scrolling of the archive in the built-in archive player.
    Fixed issue when, after installing the version for Linux, access to folders was available only with root rights. Now the user who initiated the installation also has access.
    Repeater: fixed an invalid certificate error that was displayed when a client part couldn’t connect to a server through Repeater due tto a weak Internet connection.
    Fixed issue with an endless switching from a low resolution stream to a high resolution stream that occured when clicking berwwen cameras with buffering on the client side enabled.
    User dialog: fixed crash when opening a user dialog on 32-bit and 64-bit Windows systems.

[close]

http://felenasoft.com/
Titel: Netcam Studio 1.9.2.0
Beitrag von: SiLæncer am 05 Juli, 2020, 20:00
(https://i.postimg.cc/sgnhsdPj/screenshot-1342.png)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

http://www.netcamstudio.com/
Titel: Xeoma 20.7.31 Beta
Beitrag von: SiLæncer am 01 August, 2020, 10:00
Changelog

    Xeoma Pro Your Cloud: added options to prohibit adding or removing cameras or editing settings in a subscriber account in the via JSON API;
    Improved changing settings of USB cameras via JSON API in the Xeoma Pro Your Cloud mode.
    Xeoma Pro Your Cloud: optimized work of “empty” accounts. Now a subscriber’s account that doesn’t yet have cameras and is not connected to the server will not be spending server resources
    Xeoma Pro Your Cloud: in configuration files of subscribers added option to limit operating time of an account per day.
    Improved the message on the client side when Xeoma is in the process of starting after a restart.
    Fixed a problem when, while working with camera settings via ONVIF in the “Onvif camera settings” dialog, the server might have stopped responding for a while.
    Fixed problem with resetting a custom path to a network drive in the “Preview and Archive” module under Linux/ARM.
    Web Server: fixed minor bugs in Xeoma’s web page.
    Web server: fixed possible motion distortions when viewing a camera using webRTC technology.
    Fixed gray distortions of the footage when viewing h265 records.
    Fixed an issue where the last opened tab was not remembered if the “Individual order of cameras” checkbox was unchecked in the Layouts menu.
    Fixed a problem where visualization from the “License plate recognition” module was not displayed in the built-in archive viewer.
    Fixed false message “Invalid URL” in the “Universal camera” module.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.10
Beitrag von: SiLæncer am 02 August, 2020, 20:00
Changelog

- Because the video resolution of some cams changed for a few seconds
  and afterwards restored, we decided to never reset the sensitivity
  settings of the single zones (it's up to you to re-configure them
  if you change the video resolution or the zones size)
- A warning message is now shown when frames get dropped because of
  memory shortage and system overload
- Added the "Show password" checkbox
- Small but nice enhancements to the web interface
  (thanks to Yan Anquetil for helping with that)

[close]

http://www.contaware.com/
Titel: Xeoma 20.7.31
Beitrag von: SiLæncer am 22 August, 2020, 20:00
Changelog

    Age recognition: new Additional module “Age recognition” has been added. This module allows you to determine the age of people in the camera image in real time. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Detector of Construction Site Safety: new Additional module “Detector of Construction Site Safety” has been added. This module detects safety gear items in the frame that are critical for observing safety measures at a construction site: safety helmets and protective clothing (working uniform). This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Sound Events Detector: new Additional module “Sound Events Detector” has been added. It can recognize 5 types of sounds: glass breaking, car alarms, baby cries, screams and gunshots. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Mask Detector: new Additional feature has been added to the “Face Recognition” that automatically finds people in the camera frame and determines whether they have a medical mask on their faces or not. With the mask detector, you can use Xeoma notifications and reactions to quickly alert authorized personnel when people with or without medical masks are discovered. This feature is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required. Video about this feature | Mask Detector PDF presentation
    Operation algorithms of the “FaceID” module for dual authorization have been improved. Now the module can distinguish whether there is a live person in front of the camera or just their photograph. This is done without use of any additional equipment in the new version while previously this could only have been achieved with special 3D cameras.
    Operation algorithms of the “Cross-Line Detector”, “Visitors Counter”, “Crowd Detector” modules have been improved. Now they have built-in artificial intelligence mechanisms (object recognition) that allow modules to identify objects more efficiently and accurately.
    Additional feature: a new macro %CROWD% has been added to the “Crowd Detector” module that allows to use results ​​from this module in other modules (for example, in the “Sending Email” module).
    PRO: added new module “My Detector” that allows you to use your own neural networks library for detection of events or objects. With it you can add and use your own intellectual module in the program.
    PRO: support for the third-party Platerecognizer utility has been added to the “ANPR”(license plate recognition) module. The utility offers a wide range of supported countries, affordable prices, and quick addition of new countries and types of license plates.
    PRO: improved work with active LDAP directories in the Users dialog. Support for the secure LDAPS certificate on Linux systems has been added.
    PRO: improved work with active LDAP directories in the Users dialog. The “test connection” button has been added for convenience.
    PRO: option to select the duration of sound playback is added in the “Sound Alarm” module for the option to playback the sound on the client side.
    PRO: The “Sound Alarm” module’s option to playback the sound on the client side is now also available in the multiserver mode.
    Improved work with hardware keys on virtual machines: now it is possible to add new licenses to a hardware key even if Xeoma is running on a virtual machine.
    Operation of the Universal Camera module has been improved: now the TCP protocol is used by default for camera streams which in most cases means a more stable picture without distortions.
    Web server: added support for IPv6 addresses.
    webAPI: a command to remove a camera has been added to the Xeoma web API.
    Web Server: the Xeoma Web server log has been improved – now the log also contains information about connection attempts with correct and incorrect passwords.
    Android: fixed an issue with invalid click coordinates on devices like Samsung Galaxy a30 in Xeoma’s Android app .
    Xeoma Pro Your Cloud: the ability to use the high resolution stream from the archive to be attached to emails has been added to the “Sending Email” module for the Xeoma Pro Your Cloud mode.
    Xeoma Pro Your Cloud: fixed the problem with installation of the Xeoma Pro Your Cloud server to autostart on Linux systems.
    Xeoma Pro Your Cloud: added options to prohibit adding or removing cameras or editing settings in a subscriber account in the via JSON API;
    Improved changing settings of USB cameras via JSON API in the Xeoma Pro Your Cloud mode.
    Xeoma Pro Your Cloud: optimized work of “empty” accounts. Now a subscriber’s account that doesn’t yet have cameras and is not connected to the server will not be spending server resources
    Xeoma Pro Your Cloud: in configuration files of subscribers added option to limit operating time of an account per day.
    Improved the message on the client side when Xeoma is in the process of starting after a restart.
    Fixed a problem when, while working with camera settings via ONVIF in the “Onvif camera settings” dialog, the server might have stopped responding for a while.
    Fixed problem with resetting a custom path to a network drive in the “Preview and Archive” module under Linux/ARM.
    Web Server: fixed minor bugs in Xeoma’s web page.
    Web server: fixed possible motion distortions when viewing a camera using webRTC technology.
    Fixed gray distortions of the footage when viewing h265 records.
    Fixed an issue where the last opened tab was not remembered if the “Individual order of cameras” checkbox was unchecked in the Layouts menu.
    Fixed a problem where visualization from the “License plate recognition” module was not displayed in the built-in archive viewer.
    Fixed false message “Invalid URL” in the “Universal camera” module.
    PRO: fixed the issue with the “RTSP Translator” module when necessary files could not be unpacked completely.
    “Save to File”: fixed the issue where the module could create 0 bytes files if the frame rate of the camera stream had a value with a fraction (for example, 15.5).
    Fixed issue with the frame-by-frame scrolling of the archive in the built-in archive player.
    Fixed issue when, after installing the version for Linux, access to folders was available only with root rights. Now the user who initiated the installation also has access.
    Repeater: fixed an invalid certificate error that was displayed when a client part couldn’t connect to a server through Repeater due tto a weak Internet connection.
    Fixed issue with an endless switching from a low resolution stream to a high resolution stream that occured when clicking berwwen cameras with buffering on the client side enabled.
    User dialog: fixed crash when opening a user dialog on 32-bit and 64-bit Windows systems.

[close]

http://felenasoft.com/
Titel: IP Camera Viewer 4.1
Beitrag von: SiLæncer am 26 September, 2020, 20:00
(http://www.deskshare.com/images/ipcv/MainInterface.gif)
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/
Titel: ContaCam 9.9.11
Beitrag von: SiLæncer am 12 Oktober, 2020, 19:00
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- Fixed locking prev-video/next-video/back-to-summary/download buttons for big video files on Chromium-browsers and Win7/8.x-IE
- In web interface the video player speed can now be reduced or increased up to a factor of 8x. Moreover it's possible to forward step frame by frame (Firefox-browser supports that best)
- Made the configuration.php saving more robust to avoid that NULs get written into that file when a crash/hang happens

[close]

http://www.contaware.com/
Titel: Xeoma 20.11.5 Beta
Beitrag von: SiLæncer am 05 November, 2020, 20:00
Changelog

    Xeoma Pro Your Cloud: fixed slow launch of the server part.
    Xeoma Pro Your Cloud: fixed occasional crash.
    Improved work of the “Camera ONVIF settings” option for when connection is made under a user, not administrator.

[close]

http://felenasoft.com/
Titel: Xeoma 20.11.5 Final
Beitrag von: SiLæncer am 10 November, 2020, 20:30
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    New edition: for a limited time licenses for a new mode – Xeoma Starter – are available for purchase! Xeoma Starter is a hybrid of the Free edition and Xeoma Lite taking the best of the two: affordability, remote access, unlimited view, no watermarks or adds or donation requests, etc. Works on virtual machines. The edition will be the perfect choice for small CCTV systems, either for home or commercial video surveillance scenarios – for example, in food trucks and coffee vans, in flower shops or embedded into ATMs. Spend less – get more with Xeoma Starter. Details here
    Text Recognition: added new Additional module “Text Recognition”. It can recognize digits and words in the camera’s sight, save information to reports, and react upon detecting a pre-set number of text. Perfect for scanning surroundings for advertisement signs or for recognition of license plates from unsupported countries. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Modbus Controllers: added new Additional module “Modbus Controllers”. It can receive commands from controllers that work through the Modbus protocol, and trigger various pre-set reactions in Xeoma. This is a very popular type of controllers used in automation systems, smart homes, traffic lights equipment, etc. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Social Distance: a new feature called “Social Distance” has been added to the “Crowd Detector” Additional module. Thanks to this option, the module can automatically track whether a given social distance is observed between people in camera sight. Setting up this feature is simple: the allowed distance is set by a line in the module itself. This feature will be useful in any public places to automatically track compliance with the recommendations stopping the spread of the coronavirus epidemic. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Improved ANPR (Additional feature): more countries have been added in the ANPR module into the option to recognize license plates with our own Additional tool. The previously available CIS countries are now complemented with the USA and Canada. Recognition for Chinese license plates has been added too but it works only under Intel 64 processors.
    Additional module: improved algorithms for the “Face Detector (Emotions)” module. The accuracy of determining emotions (surprise, happiness, anger, disgust, fear, or neutrality) is now significantly higher.
    Added new module “Mobile Notifications” that allows to receive notifications in mobile devices running iOS (iPhone, iPad) or Android. The advantage of the new module is that it doesn’t require the app to be running in your Android/iOS device to be able to notify you of the alerts (unlike the simpler module for mobile notifications “Client Window Pop-Up” that requires the app to be always running to push alerts). With the new module you will see alerts from selected servers as iPhone’s, iPad’s standard notifications – on the lock screen, in the Banners area, or in the Notification Center.
    For Android this module will now be used instead of the now-discontinued “Client Window Pop-Up” module. Mobile notifications in Android can appear in their usual form: as an icon in status bar, as a more explicit notification in the notification drawer, as a floating window over other apps (heads-up notification) in unlocked phone (ringtones and vibration for Android version 7.1 and lower), as notifications on the secure lock screen, or as a colored “notification badge” (a “notification dot”) on the app launcher icon.
    The module is available in Xeoma Standard and Xeoma Pro editions.
    PRO: improved work with active directories LDAP in the Users dialog. Now it features the ability to specify not just LDAP user groups, but also subgroups.
    PRO: added ability to customize joystick control buttons. When the joystick is “seen” in the system with Xeoma, a corresponding option will appear in the “Layouts” menu (click the “Window” icon in the bottom panel) where you can set associations between the joystick’s buttons and actions in Xeoma.
    PRO: in the ANPR module we have added the ability to use the “local” version of the Platerecognizer utility (i.e.working on the same machine), as an alternative to the previously added “cloud” version of the utility.
    PRO: improved algorithms for the “Face Recognition” module (“Statistical Analysis” option). Thanks to new modifications of the module, the accuracy of face detection and recognition has been increased drastically.
    PRO: added support for the NO_LOW_RELIABILITY flag to the “ANPR” module for the option of recognition using the iANPR utility. This flag is designed to reduce false positives and is used in a combination of recognition methods 2 and 3.
    PRO: added support for RTSP Broadcasting module under ARMv8.
    PRO: added a JSON API command to start the search for cameras on the server.
    PRO: added a JSON API command to add camera chains with a pre-set template, and set user access rights to them straight away.
    PRO: added a JSON API command to get the camera state.
    Xeoma Pro Your Cloud: added the ability to use separate ports for the web admin panel and for the “HTTP Receiver”, “HTTP Switch”, “HTTP Marking” modules.
    Xeoma Lite: added the ability to work on virtual machines.
    Enabled the “Screen Capture” module for Mac OSX.
    “Preview and Archive”: added more values ​​to the “Leave free disk space” setting.
    “Problems Detector”: added the ability to work in combination with filter modules (for example, with the “Scheduler”).
    “Problems Detector”: improved detection of problems like “Image is not refreshed” and “No camera stream (video or audio) entirely”.
    Added the ability to disable automatic shutdown of a camera. Now you can choose whether you want to stop getting a video stream from a not currently viewed camera with just a “Preview” module in the chain (no filters used) or if you’d like to continue receiving it.
    “Web Server”: added the ability to specify and use separate ports for different “Web Server” modules even on the same server.
    Xeoma Pro Your Cloud: fixed disabling of an “empty” account (an account in which no cameras have been added yet) when a camera search is launched via the web interface.
    Fixed export of short intervals from h264/h265 archives.
    Fixed possible server freeze under Linux when the Repeater service gets enabled (possibly repeated with an unstable Internet connection).
    Fixed the PTZ presets issue with the “Megapixel IP” camera brand.
    “Universal camera”: fixed false error message “Invalid URL” appearing in the module settings.
    Layouts: fixed the issue where the latest opened Page has not been saved on the client. The issue appeared when “Custom order of cameras” option was used.
    “SMS Sender”: fixed problem with sending SMS (text messages) to several numbers at once when using the Clickatell service.
    Android: added the “Switch to the free mode” option in the Main Menu.
    Fixed freezes when restoring old settings via the “Restore settings” menu option.
    Improved auto-search for Xeoma servers in the local network that are listed in the Connection Dialog.
    Fixed a possible crash after installation of Xeoma under Linux.
    Xeoma Pro Your Cloud: fixed slow launch of the server part.
    Xeoma Pro Your Cloud: fixed occasional crash.
    Improved work of the “Camera ONVIF settings” option for when connection is made under a user, not administrator.

[close]

http://felenasoft.com/
Titel: Home Security Camera 6.3
Beitrag von: SiLæncer am 16 November, 2020, 10:00
(https://i.postimg.cc/K8hST8NQ/screenshot-1619.png)
Free software for video surveillance. You no longer need to pay anything to the cloud service for video surveillance! The minimum delay is only 1 - 2 seconds when broadcasting from an IP camera

Freeware

http://free-video-surveillance.com/
Titel: ContaCam 9.9.12
Beitrag von: SiLæncer am 18 November, 2020, 12:00
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Removed Motion vs. Continuous REC option from Camera Basic Settings because that can be configured with the REC toolbar button
    Added support for TP-Link NC2XX, NC4XX and Tapo cloud cameras
    Some smtp servers don't say ESMTP in the greetings even if they support it; for this reason we now force EHLO when user credentials are provided (thanks to Hajo Ottenbacher for researching that)
    Trim leading/trailing spaces for entered donation email address

[close]

http://www.contaware.com/
Titel: Xeoma 20.11.30 Beta
Beitrag von: SiLæncer am 30 November, 2020, 20:00
Changelog

    Improved Trial edition of Xeoma: time between settings resets is now 8 hours instead of just 4 as it was before. Now you will have more time to test Xeoma and its more than 100 features. Don’t forget that you can re-use Trial edition as many times as you’d need. Read more about Xeoma editions
    Formerly added as an Additional module “Move to PTZ preset” is moved to Xeoma Pro edition and now available with any Xeoma Pro license, not as an Additional module.
    Formerly added as Additional modules “Camera Embedded Detectors” and “GPIO” are now available in Xeoma Standard and Xeoma Pro editions, not as Additional modules.
    New Additional module called “Slip and Fall Detector” has been added that is based on neural networks and able to detect when people in the camera view slip and/or fall. This feature will be useful in health and patient care organizations, especially in work with elderly people, as well as in city surveillance for instant reaction to accidents (including falling off a chair or a bed). This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    New module: A new module called “Streaming to Youtube” has been added. Use it to push a camera feed to your Youtube channel as a live broadcast. Xeoma’s Youtube streaming will be a perfect way to build trust within businesses that have traditionally been stained with myths and fears like elderly care, pet hotels, or fast food and small HoReCa establishments. Besides, live streaming from your workshop will help people get interested and get to know more about the process of your craft. Moreover, it’s also an easy workaround for when remote view of camera video stream is needed but there’s no public IP address in there. This module will be available in Xeoma Standard and Xeoma Pro editions. Read more about the module
    Improved Additional module “Modbus Controllers”: an option has been added to push signal to all of the chain’s split module lines, not just one as previously, upon receiving a trigger from an input port. Read more about the module.
    Improved Additional module “Text Recognition”. Now recognition of digits and detection of words and numbers works even more efficiently. Read more about the module
    Improved Additional module “Vehicle Speed Detector”: an adjustment factor has been added to its settings to compensate for when the speed meter appliance is known to display a speed value that differs from the real one. This correction factor can be a coefficient (for example, enter 0.9 to decrease the value by 10%) or a plus/minus value to add or deduct a certain number (for example, 15).
    Improved Additional module “ANPR”: Jordan license plates are now successfully recognized in Xeoma and this country is included into the pack of countries available with the Additional module. Do you need another country? Let us know!
    PRO: The “RTSP Broadcasting” module now features an option to broadcast H264 stream in the same format without re-encoding.
    Console: added support for more separators when activating several license codes at once. Now you can separate several serial numbers with a comma, point and even a space.
    The “HTTP Request Sender” module now supports the %REPORT% macro to get information from the “Problems Detector” module.
    Fixed issue with using a local license server for activation of a license or licenses for a server running in a virtual machine.
    Fixed occasional issue where the person that Face Recognition module was trained for couldn’t be selected.
    Fixed uneven deletion of older recordings after an archive reindexing
    Fixed issues with CUDA hardware acceleration: restarts of decoding for video streams with audio, and color correction for decoded videos.
    Fixed absence of webRTC archives in web interface for cameras that have the option ‘Transcoding on Xeoma side for WebRTC broadcasting’ ticked.
    Failover: improved display of list of the to-be-backed up servers. The list is now updated regularly.
    Reduced the size of a cache file for archive recordings, optimized work with the file.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.13
Beitrag von: SiLæncer am 04 Januar, 2021, 19:00
Whats new:>>

    In bottom toolbar re-added Camera Settings button and always pop-up a menu for all buttons with an arrow added F1 key for "Online Help", F3 key for "View RECs in Web Browser" and F4 key for "View RECs in File Explorer"
    Added support for Escam

http://www.contaware.com/
Titel: ContaCam 9.9.14
Beitrag von: SiLæncer am 05 Januar, 2021, 10:00
Whats new:>>

Updated instructions on application background

http://www.contaware.com/
Titel: ContaCam 9.9.15
Beitrag von: SiLæncer am 16 Februar, 2021, 18:00
Whats new

- The web interface trash button is now definitively deleting the
  recordings instead of renaming them to .recycled
- Uninstaller has got a "Keep the settings for later use" checkbox
- Limit the maximum number of encoding threads to 16 as H.264 can have
  problems above that count

http://www.contaware.com/
Titel: Xeoma 21.3.4
Beitrag von: SiLæncer am 22 März, 2021, 20:00
Changelog

    Eye Tracking:

    New Additional module “Eye Tracking” has been added. This module is used to track what people in camera’s sight are looking at. This can be successfully utilized in various spheres including psychology research and neuromarketing.

    Parking Spots:

    New Additional module “Parking Spots” has been added. This module is used to automatically determine and update the status (empty/occupied) of parking spaces in a parking lot. The module can also be used for other objects types, for example, for attendance in offices, statistics in cinema, etc. Read more

    Face Recognition:

    Frame that appears around the face of a recognized person and their name are now overlaid on screenshots that you take from the Xeoma interface using the “Screenshot” option.
    Improved the accuracy of face recognition for both “Statistical Analysis” and “Artificial Intelligence” methods of recognition by adding an option to the module settings to also analyze posture of the human body in camera’s sight. This helps to determine the location of a person’s face more accurately. Available for limited range of processors. See details here

    PTZ Tracking:

    Added the option to use a PTZ preset as the initial position of the camera, to which it returns after finishing tracking an object. To use it, rotate the camera to the desired position, make a preset in that position, and use it in PTZ Tracking settings as a start position (or use one of camera’s existing presets).
    Added support for hardware license keys in ARM devices. Your USB hardware key with a current Xeoma license will be detected automatically in the new version in devices with ARMv7 or ARMv8 architecture.

    PRO:

    New option to rebroadcast the stream without conversion has been added to the “RTSP Broadcasting” module. With its help Xeoma video surveillance software will broadcast the h264(h265) camera stream in the same format thus not inflicting additional CPU load.
    a new function to check availability of the specified port has been added to the “RTSP Broadcasting” module. If the specified port is already taken, Xeoma video surveillance software will have a warning about that now.
    A new opportunity to input the final URL to access the broadcast stream with has been added to the “RTSP Broadcasting” module. Find it in the module’s settings.

    JSON API:

    A new command to get statistics on archives recording (“archivestatistic=”) has been added to Xeoma’s JSON API.
    New commands for working with archive’s undeletable intervals (“markasundeletable=”, “unmarkasundeletable=” etc.) have been added to Xeoma’s JSON API.
    A new option to specify a specific subnetwork to run the search for cameras in (“addr=NNN.NNN.NNN.NNN”) has been added to Xeoma’s JSON API.
    Fixed deactivation of JSON API when all WebServer modules are removed from Xeoma.
    Multi-server mode: support for change of pages number and their display with the help of the PreviewConfiguration file has been added for the multi-server connection too.
    Added new option to control focus of cameras with support for ONVIF PTZ. Xeoma’s PTZ control now has two more buttons for zoom focus in or out for that purpose.
    Universal Camera: a new option “Use the server’s system time to generate timestamps for frames (use in case of archive mistiming issues)” has been added to the module’s settings. It will help resolve some of the archive recording issues. See more here
    Added opportunity to change the default chain sample that all new cameras are added with in Xeoma. Specify a new default chain in the DefaultChain.txt file and place it to the ChainTemplates folder in Xeoma’s folder.

    Web Server:

    More exact time with accuracy up to seconds can now be specified for export of archives from the web interface.
    Fixed memory leaks in Docker when the Web Server module is used.
    Added a new “Multi-removal” icon to remove several camera chains at one time. Find it in the lower icons panel in the Multi-Camera View Window.

    HTTP Switcher:

    Added opportunity to use user profile credentials for working with the “HTTP Switcher” module that has the authorization option enabled.

    HTTP Request Sender:

    Now you can use POST requests with your custom headers.

    LDAP:

    Fixed import of users from an LDAP server when entries have ‘person’ name as an identificator instead of ‘user’.
    Fixed the CPU burst issue upon entering any module’s settings.
    Fixed the false “Problems Detector” warnings about camera not working when the camera is disabled due to the ‘Auto-disable’ function.
    Fixed memory leak that would appear when layout pages were edited in systems with many cameras and users.
    Fixed occasional crash in devices under Linux and Mac OS when the “Screen Capture” module was used.
    Fixed issues that used to make it impossible to use CUDA hardware acceleration in Linux machines.

    Sending email:

    Fixed issue when messages were not sent if one or several of listed email addresses were invalid or misspelled. This new version of Xeoma will send messages to all the rest of listed email addresses.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.16
Beitrag von: SiLæncer am 01 April, 2021, 21:00
Changelog

    Web interface always displays 12 video thumbs per page as responsive 4x3, 3x4, 2x6, 1x12 grids
    Web interface supports now passing the credentials as parameters like: http://CONTACAM-PC:PORT/CAMERA_NAME/poll.php?username=USER&password=PW
    The rec dot overlay is now displayed with an outline border and the saving progress is shown with a small horizontal bar instead of text
    Added support for Ezviz
    UDP Multicast transport possibility for RTSP streams
    Enabled Address Space Layout Randomization (ASLR) with /DYNAMICBASE

[close]

http://www.contaware.com/
Titel: ContaCam 9.9.17
Beitrag von: SiLæncer am 19 April, 2021, 12:00
Whats new:>>

- We have got a code signing certificate
- Updated to ffmpeg 3.4.8

https://www.contaware.com/
Titel: Xeoma 21.4.2
Beitrag von: SiLæncer am 27 April, 2021, 19:00
Changelog

    Face recognition: improved algorithms of the intellectual module “Face recognition” to allow better recognition when training is conducted with faces at a maximum range (distance).
    FTP Receiver: improved module’s operation with Dahua cameras. We fixed the issue with low FPS when working with the Dahua cameras through FTP.
    Marking: added integration of the “Marking” module to work with the Ublox neo-7m GPS module. Now you can receive coordinates in Xeoma from this GPS module.
    Local license server: added support for rented licenses and demo/trial licenses. Now you can activate these licenses using the ‘local license server’ activation option.
    PTZ control: added a new icon in the PTZ control menu to use additional features that a camera provides through ONVIF. These can be turning on/off IR-illumination of the camera or a camera wiper, etc. The new icon can be found in the PTZ control menu available in the Single Camera View window.
    The “HTTP Switcher” module’s icon is now available on the main page of Xeoma’s web browser interface – for webRTC streams as well. This module can be used for integration with various devices like gate barriers, sound alarms, smoke detectors etc.
    Rebranding/Customization: fixed the issue with Xeoma name replacement on Windows. ‘Xeoma’ will be replaced in firewall rules with ‘Your Product Name’ after rebranding now.
    Web interface: fixed the issue with displaying webRTC video in Firefox browser.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.18
Beitrag von: SiLæncer am 08 Juni, 2021, 23:30
Whats new:>>

- Fast video saving option (be aware that this new setting will generate
  bigger files)
- The RTSP stream decoder with UDP transport is now more fault tolerant
- Daily summary video frame interval can now have any value, before it
  had to be bigger or equal to the live snapshot rate
- Changed ffmpeg build toolchain from mingw to msvc

http://www.contaware.com/
Titel: Xeoma 21.6.4 Beta
Beitrag von: SiLæncer am 10 Juni, 2021, 10:00
Changelog

    All improvements from Xeoma Beta 21.5.31
    Eliminated delay in sending emails with the “Email Sending” module: now when it’s time to send the message it is sent immediately.
    Fixed the syslog error “current command vanished” after Xeoma installation in Debian.

[close]

http://felenasoft.com/
Titel: Xeoma 21.6.4
Beitrag von: SiLæncer am 16 Juni, 2021, 11:00
Changelog

    360° Surround View: new Additional module “360° Surround View” has been added. This module is used to get an all-round view by combining streams from 4 live cameras. Can be used in vehicles or any size or form. Read more
    Parking Spots: the “Parking Spots” module now has an embedded object recognition algorithms to detect cars. Now you don’t need an additional module (ANPR or Object Recognizer) for that as you did before.
    Face Detector (Emotions): added a new %EMOTIONS% macro. Use it in HTTP Request Sender, Email Sending or App Runner module to get dynamic information on the recognized emotions, as well as its accuracy percentage and time of recognition.
    Camera Embedded Detector: fixed multiple reconnection of the “Camera Embedded Detector” module to a camera.
    Xeoma Pro: Face Recognition: fixed crash at using the new posture analysis feature that is used for more accurate, better search for human faces in camera sight.
    Xeoma Pro You Cloud: a subscriber whose account is suspended due to absence of cameras can now log in to their account anyway.
    Xeoma Pro You Cloud: now license limits are not spent on subscribers whose accounts are suspended due to absence of cameras. Such accounts are not taking up camera count.
    Multi-server mode: now set up pages do not disappear when a server or servers from the connection list are unavailable, or when a new server is added.
    Mobile Notifications: added a new option that, when selected, sends a photo of the event from the camera along with the event time/date in a push notification.
    ANPR: optimized disk load that the third-party openALPR.
    ANPR: fixed crash when using the Xeoma’s Improved license plate recognition package for Jordan license plates.
    LDAP: the LDAP server settings dialog in Main menu – Remote access – Users – LDAP) now offers the opportunity to choose objectClass for users and groups of users for more detailed control over requests in LDAP synchronization.
    WebApi: added error log for export web commands.
    Hardware keys: now you can add licenses to a hardware key even if you are using a “too new” Xeoma version that the hardware key’s original licenses do not support.
    The Problem Detector module’s section for checking availability of a network resource is now complemented with the ping tool for Linux and Mac OSX (previously available only for Windows).
    The Motion Detector’s option ‘ignore motion shorter than’ now has the value of 1.5 secs.
    Pages: now you can select cameras for a new Page from a list (as opposed to selection of cameras by their preview images). This will be most convenient for users of large-scale systems with hundreds of cameras.
    Universal Camera: improved changing camera settings through ONVIF. Now the ONVIF settings change dialog has updated information about camera bitrate even if it was changed in camera’s web admin page, outside of Xeoma.
    Fixed absence of webrtc live view option in some cases of viewing through Xeoma’s web interface.
    Fixed disappearance of configured user profiles after problems with the license.
    Fixed issue with USB cameras taking place of each other after restarting the server (when using multiple USB cameras at the same time).
    Eliminated delay in sending emails with the “Email Sending” module: now when it’s time to send the message it is sent immediately.
    Fixed the syslog error “current command vanished” after Xeoma installation in Debian.

[close]

http://felenasoft.com/
Titel: Netcam Studio 1.9.5.0
Beitrag von: SiLæncer am 24 Juni, 2021, 19:00
(https://i.postimg.cc/sgnhsdPj/screenshot-1342.png)
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

http://www.netcamstudio.com/
Titel: Xeoma 21.8.3 Beta
Beitrag von: SiLæncer am 04 August, 2021, 20:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Added the long-awaited ability to view the program logs directly from the interface. Open the dialog with logs through Xeoma’s Main Menu Information Event Log, and the administrator and system operators will be able to view which modules were triggered and other important events.
    Formerly added as an Additional feature “Fire Detection” is now available as part of the “Smoke Detector” module in Xeoma Pro mode with any Xeoma Pro license, not as an Additional module.
    Starter: Full-screen mode is now available in Xeoma Starter.
    Xeoma’s ‘Active licenses’ dialog (Main Menu -> Information -> Active Licenses) now features information not only about activated licenses, but also about renewals.
    Multi-Server Mode: now Xeoma has the ability to save previously configured Tabs in Multi-Server Mode when adding new servers or deleting old ones. It will also help to avoid tabs breaking when one or several of servers is/are unavailable.
    Now the program can be opened in full screen with the F11 key on the keyboard. This feature will work on Windows, Linux and even Mac OS X.
    Added the ability to set the port for webRTC (previously the ports had been assigned automatically);
    Fixed excessive deletion of records during overwriting when storage time is set to 1 day.
    Fixed client launch on Linux with new glu 9.0.2-1.
    Xeoma Pro Your Cloud: fixed the issue with new parameters from the main cloud.config not applying.
    Fixed the issue on ArchLinux that the embedded links to web pages (purchase page, etc.) did not open.
    Fixed sending a POST request with the %EMOTIONS% macro from the “HTTP Request Sender” module.
    Fixed incorrect time on the archive export page in Xeoma web interface.
    Eliminated appearance of gray frames when adding an H265 camera to the program.
    Fixed the issue where the resolution of the video stream received via a direct link from the “Web Server” module depended on whether someone was viewing the camera on the web page at that moment or not.
    Fixed appearance of gray frames in the built-in archive viewer when viewing recordings from an H265 camera.
    Fixed the issue that the RPI camera module did not work in Xeoma on the Raspberry micro PC.
    Fixed the delay in pausing playback in the archive viewer after the pause button has been pressed.

[close]

http://felenasoft.com/
Titel: Xeoma 21.8.10 Beta
Beitrag von: SiLæncer am 12 August, 2021, 19:00
Whats new:>>

Fixed the issue where all cameras were shown in background behind the new camera setup dialog when adding a new camera from the Single Camera View window.

http://felenasoft.com/
Titel: ContaCam 9.9.19
Beitrag von: SiLæncer am 26 August, 2021, 09:00
(https://i.postimg.cc/52PSq5x6/screenshot-85.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Introduced profiles to configure up to 4 commands per camera
    Added magnetic/snapping borders to the camera windows
    Updated internal web server to Apache 2.4.48 and PHP 8.0.7 (Apache and PHP both with OpenSSL 1.1.1k)
    Because many users expressed security concerns we removed all "Show password" checkboxes
    Dropped Windows Vista and Windows Server 2008 support

[close]

http://www.contaware.com/
Titel: Xeoma 21.8.10 Final
Beitrag von: SiLæncer am 31 August, 2021, 11:00
Changelog

    Added the long-awaited ability to view the program logs directly from the interface. Open the dialog with logs through Xeoma’s Main Menu – Information – Event Log, and the administrator and system operators will be able to view which modules were triggered and other important events.
    Formerly added as an Additional feature “Fire Detection” is now available as part of the “Smoke Detector” module in Xeoma Pro mode with any Xeoma Pro license, not as an Additional module.
    Starter: Full-screen mode is now available in Xeoma Starter.
    Xeoma’s ‘Active licenses’ dialog (Main Menu -> Information -> Active Licenses) now features information not only about activated licenses, but also about renewals.
    Multi-Server Mode: now Xeoma has the ability to save previously configured Tabs in Multi-Server Mode when adding new servers or deleting old ones. It will also help to avoid tabs breaking when one or several of servers is/are unavailable.
    Now the program can be opened in full screen with the F11 key on the keyboard. This feature will work on Windows and Linux.
    Added the ability to set the port for webRTC (previously the ports had been assigned automatically);
    Fixed excessive deletion of records during overwriting when storage time is set to 1 day.
    Fixed client launch on Linux with new glu 9.0.2-1.
    Xeoma Pro Your Cloud: fixed the issue with new parameters from the main cloud.config not applying.
    Fixed the issue on ArchLinux that the embedded links to web pages (purchase page, etc.) did not open.
    Fixed sending a POST request with the %EMOTIONS% macro from the “HTTP Request Sender” module.
    Fixed incorrect time on the archive export page in Xeoma web interface.
    Eliminated appearance of gray frames when adding an H265 camera to the program.
    Fixed the issue where the resolution of the video stream received via a direct link from the “Web Server” module depended on whether someone was viewing the camera on the web page at that moment or not.
    Fixed appearance of gray frames in the built-in archive viewer when viewing recordings from an H265 camera.
    Fixed the issue that the RPI camera module did not work in Xeoma on the Raspberry micro PC.
    Fixed the delay in pausing playback in the archive viewer after the pause button has been pressed.
    Fixed the issue where all cameras were shown in background behind the new camera setup dialog when adding a new camera from the Single Camera View window.

[close]

http://felenasoft.com/
Titel: Xeoma 21.10.13
Beitrag von: SiLæncer am 01 November, 2021, 11:00
Changelog

    Additional module “Object Recognition“: the module now supports work in 64-bit Linux/ARM systems and can be used for example in micro computers like Raspberry Pi. The same set of supported objects to recognize, same purchase conditions and simplicity of configuration now available for single board computers as well! More about the module
    Xeoma Pro: added the new “Thermal Camera Data” module for integration with HikVision thermal cameras. This module receives information about temperature from HikVision thermal cameras and can trigger when the minimum, maximum or average temperature is equal to, higher, lower than the defined value, or is in the specified range. The module can be used to detect passengers with fever, or catch ignition of a fire, or to control technology temperatures in production.
    Do you need this function for another camera brand? Contact us!
    Xeoma Pro: improved the timeline operation for the “simultaneous view of several archives” mode. Now, to quick jump to a specific data and time you can click on the corresponding place in any of the colored lines on a timeline.
    Layouts: improved the “unassigned cameras” Page. Now the “unassigned cameras” Page changes dynamically: cameras that have been assigned are removed from this Page, and new unassigned cameras are automatically added to this Page.
    Archive recordings viewer: quick pause and start of playback is once again available upon clicking on any place in camera image.
    The Connection Dialog now has the auto filling option for the list of servers. Just start typing the server address, and the servers in the list will be sorted out, showing only those corresponding to what you typed. This improvement will be most useful for systems that handle connection to dozens of Xeoma servers.
    Web Server: a search bar added to a Xeoma page with the list of cameras that can be used for a quick search for an added camera by its name.
    Layouts: a new Pages mode added. When it is used, all connected clients will automatically be switched to a Page that displays triggered (‘active’) cameras. This mode will be perfect for a strict protocol systems where operators are obliged to view alerts and triggered cameras.
    Notifications sent with the Mobile notifications module now will also work in Xeoma’s Trial mode. That means that like almost 100 features of Xeoma, this feature can now be tested without having to purchase a Xeoma license.
    Added automated activation of communication through ONVIF protocol for HikVision cameras during a scan for cameras. Before this change HikVision cameras sometimes failed to be added to Xeoma (even manually) because of ONVIF communication disabled in the settings. Now if you enter authorization credentials in Xeoma’s search boxes, the program can enable ONVIF for you so that the camera is successfully added.
    Multi-server mode: improved usability of Pages in the multi-server mode. Now Xeoma remembers what Page has been the last to close, and re-opens it at the next launch.
    Screenshot: enhanced usability for sending a still shot from a camera to email with the embedded “Screenshot” feature. Now you do not need to enter the authorization data in Xeoma if you use a ‘local’ email server with no credentials.
    Camera-Embedded Detector: fixed a possible authorization issue with the HiWatch DS-I450 camera model.
    Xeoma Pro Your Cloud: improved work of the “HTTP Receiver” module in combination with “HTTP Sending to another Xeoma” in the Xeoma Pro Your Cloud mode. Fixed the issue when you could get the ‘Waiting for image from camera’ message instead of the camera stream.
    Web Server: fixed the PTZ camera issue when the camera didn’t stop rotation even though the PTZ controller button was no longer pressed.
    Fixed the possible rights issue in Mac OSX that could have resulted in activation, recording and settings saving issues.
    Fixed Xeoma server freezes at group change of ‘Universal Camera‘ module settings for a big amount of cameras.

[close]

http://felenasoft.com/
Titel: Xeoma 21.11.18
Beitrag von: SiLæncer am 02 Dezember, 2021, 21:00
Changelog

    Xeoma Pro Your Cloud: Added a new parameter to prohibit to show and use the Motion Detector‘s resource-hungry option to recognize and only react to people and/or vehicles.
    ONVIF: Added the possibility to change an ONVIF camera’s IP address, login or password through Xeoma interface. Find these new options for your ONVIF camera in the “Universal Camera‘s” ONVIF control option. These actions can now be performed directly from Xeoma interface relieving you from the necessity to go to the camera admin page in a web browser.
    Rebranding: Added options to change size and position of cameras preview boxes in Xeoma’s web interface. Adjust the view to best fit your convenience!
    eMap: Added option to view interactive maps in fullscreen mode. Now you can make a map fit to screen size to not miss important details especially in sites with multiple cameras per map.
    eMap: Added possibility to select transparency level of maps, including full opacity. With this change, you can find a perfect ratio of alert icons visibility and background camera video feed.
    Usability: Added support for the combination of Shift and Tab keyboard buttons that sends the cursor to a previous field in settings dialogs. Now the combination is supported in Xeoma in Windows, Linux/Linux ARM, and MacOS systems.
    Web Server: Fixed the issue of webRTC archive playback being unavailable in Xeoma’s web interface after an export.
    Connection Dialog: Fixed the issue with incorrect display of addresses in the Connection Dialog after a search.
    Fixed a possible recording issue where a folder would be created with a wrong date.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.20
Beitrag von: SiLæncer am 07 Dezember, 2021, 19:00
Whats new:>>

    Improved saving of animated gif / mp4 in case of unstable rtsp streams
    To fine-tune the motion sensitivity there is now the possibility to record the zones where motion is detected
    It's now possible to include milliseconds in the frame timestamp
    Updated to ffmpeg 3.4.9

http://www.contaware.com/
Titel: Xeoma 22.3.16
Beitrag von: SiLæncer am 17 März, 2022, 20:30
Changelog

    Object Recognizer: a new, higher-performing method of object recognition has been introduced in the ‘Object Recognizer’ Additional module for systems utilizing NVidia graphics cards with support for CUDA technology. All you need to do is tick the new option in the ‘Object Recognizer’ module settings, and you will get higher recognition accuracy of the same object types for the same price.
    Object Recognizer: like many other Xeoma intellectual modules, the ‘Object Recognizer’ Additional module now features CSV reports that log date/time and what type of objects are recognized in the selected vision field, and the accuracy percentage of recognition.
    Additional module ANPR: Japan is added to the list of countries Xeoma’s Additional module ANPR works for! Which makes it 13 countries – from Kazakhstan to the USA – now supported, all for one price, no fee per image or monthly subscription needed. The Japan option is available for a limited range of processors (the requirements are similar to China license plate recognition). See more in the Additional ANPR promo page
    Archive: added the high-demand feature to save a smaller copy of the archive recordings along with the main archive. Its most common use is to provide a longer retention time for video evidence while optimizing the disk space requirements. Besides, the smaller archive will be a great aid in reducing the CPU load during simultaneous view of several archives (a feature available in Xeoma Pro), and in exporting pieces of important video in a tight network. See more here
    Xeoma Pro webAPI: a new feature to use a webApi command to initiate search by recognized objects in a camera’s archive recordings and send the resulting file to the specified FTP server has been added. Available with a Xeoma Pro license.
    Layouts: Added a new Layouts mode – automated switching to a Page with an active (triggered)camera on it. A triggered camera is one that has ongoing recording process at the moment, or one that has warning messages displayed for (for example, Problems Detector messages). Enable it in the Layouts menu (‘window’ icon in the lower icons panel).
    Rebranding: the rebranding tool now features an opportunity to change the default address for the “Cloud in 1 click” service. Use the “CloudServiceAddress” parameter in the “oem_info.xml” file to change the address.
    Xeoma Pro Your Cloud: a new parameter “ListOfEnabledModules” is now available in user configs and the main (global) config. The parameter can be used to list modules that are allowed to be used by a subscriber or subscribers. Formerly, we used to have a parameter that is used to prohibit modules only but the new one is more convenient for minimalist subscription plans where just a few modules need to be allowed.
    Xeoma Pro Your Cloud: a new parameter “EditArchivePaths” is now available in user configs and the main (global) config. The parameter can be used to allow subscribers to input the path to save recordings to. Use the parameter for a subscriber or subscribers, and they will see a corresponding field in the ‘Preview and Archive’ module settings.
    Archive: added the option to instruct Xeoma not to create missing folders from the specified archive storage path. This modification will be mainly useful in Unix systems and when a disk is mounted in a specified folder by the user. You can enable this feature with the corresponding option in the ‘Preview and Archive’ module settings.
    Users: the Users dialog now asks for a confirmation of your choice to remove a user profile. This is introduced to help avoid deletion of user profiles that are actually in use, by mistake.
    Xeoma Pro webAPI: Fixed response to the http://IP:10090/?archive_list= webApi request. Previous versions of Xeoma might have had archives that are no longer used in Xeoma listed in the response to this request. Starting from this version, the response will only list archives that are actually used.
    PTZ: Fixed the issue with PTZ cameras that support 360-degree rotation where automated rotation would suddenly stop during a long turn.
    Xeoma Pro Your Cloud: Fixed a web interface issue where some cameras might have been missing from a subscriber’s web interface if the password had special symbols.
    Fixed the issue where there was a delay in setting proper access rights in Linux systems when a camera’s archive folder was first created, or a new day subfolder was first created, which often resulted in issues when accessed from external programs.
    Xeoma Pro Your Cloud: fixed intermittent application of the LoginPasswordDelimiter parameter.
    Universal Camera: fixed gradually increasing latency as compared to the live video feed caused by the ‘Buffering’ option in the ‘Universal Camera’ module settings.
    PTZ: fixed disappearance of the PTZ control for added PTZ cameras after server is restarted.
    Accelerated camera search launched from the ‘Universal Camera’ module settings.
    Autostart settings. Fixed the issue where commands from Xeoma’s Autostart settings (Install submenu) have not been executed.
    Multiserver mode: Fixed the issue where connection was denied for all servers in the list of Multiserver mode if one of them was a Xeoma Cloud server address.
    Fixed false triggering of modules connected in the chain after filters (for example, a ‘Motion Detector’) when there were some issues with the preview stream from the camera.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.21
Beitrag von: SiLæncer am 22 März, 2022, 19:00
Whats new:>>

    Fixed a bug where a Camera failure email could be sent on camera startup (thanks to Herb Berg for reporting and researching that)
    Added support for Reolink with H.265 streams
    Added support for Yudor

http://www.contaware.com/
Titel: iSpy 7.2.4.0
Beitrag von: SiLæncer am 25 April, 2022, 19:00
(http://www.ispyconnect.com/content/screenshots/0.jpg)
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

    Security patch
    Update nuget packages
    Update VLC library
    Update ffmpeg playbackcode

http://www.ispyconnect.com/
Titel: iSpy 7.2.5.0
Beitrag von: SiLæncer am 27 April, 2022, 20:00
Whats new: >>

security update

http://www.ispyconnect.com/
Titel: iSpy 7.2.6.0
Beitrag von: SiLæncer am 02 Mai, 2022, 09:11
Whats new: >>

    Add motion timeout for image saving.
    Fix play all in playback control.

http://www.ispyconnect.com/
Titel: ContaCam 9.9.22
Beitrag von: SiLæncer am 16 Mai, 2022, 22:00
Whats new:>>

    Fixed a color shift problem happening with some cameras (thanks to
    Ján Kovác for notifying the issue)
    Added support for HeimVision
    Added support for DroidCam and DroidCamX which are Android mjpeg
    camera streaming Apps
    Updated internal web server to Apache 2.4.53 and PHP 8.0.17
    (Apache and PHP both with OpenSSL 1.1.1n)

http://www.contaware.com/
Titel: Agent DVR 4.0.4.0
Beitrag von: SiLæncer am 10 Juni, 2022, 20:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Resolve issue with VR deinit
    FTP files added back into queue on send failure.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.0.6.0
Beitrag von: SiLæncer am 15 Juni, 2022, 18:00
Whats new:>>

    Reformat PTZ Preset picker for ONVIF devices
    Add text border option for timestamp
    Add support for senseAI (alternative to DeepStack)
    Tag encoded recordings with timestamped detections
    Tag recordings with output from object, LPR and face detectors
    Update translations
    UI bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.0.7.0
Beitrag von: SiLæncer am 16 Juni, 2022, 20:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Fix bug with face delete from deepstack/ senseAI
    Add dynamic ffmpeg path testing for homebrew/ OSX.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.0.8.0
Beitrag von: SiLæncer am 20 Juni, 2022, 13:00
Whats new:>>

Roll back frame insert feature that's causing an issue on some systems

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.0.9.0
Beitrag von: SiLæncer am 24 Juni, 2022, 06:00
Whats new:>>

    Add set sensitivity to schedule
    Add Email templates in smtp settings
    Fix bug with editing mics
    Add events to actions for ui connected / disconnected / no sessions

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.0.0
Beitrag von: SiLæncer am 15 Juli, 2022, 20:00
Changelog


add events on ui connected/ disconnected
adding camera without motion - just disable but set detector to simple
add push to talk mode in settings
store enabled actions in profiles
fix auth issue for photo url support
tag recordings with detect events
add meta data to raw recordings for rotate and flip support on playback
add hikvision talk
update copy settings
add default device setting to layouts
add reolink ai and motion endpoints to detector
use absolute path to ffmpeg
fix issue with usb device access on osx
add face not recognized option to events and option to save images
fix some hevc raw record issues
bug fixes
add to and from parameters to url options for static linking to date ranges

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.1.0
Beitrag von: SiLæncer am 20 Juli, 2022, 20:00
Whats new:>>

    Add option to storage settings to keep archived recordings in database
    Re-write storage management code to reduce CPU usage
    UI updates to support archived files
    Add arrow key seeking in playback (speeds up / slows down during playback or frame by frame if paused)
    Add 2 factor authentication to account settings on web portal
    Add overly for timestamp in RAW playback
    Modify H265 raw record to only open codec if data missing in stream
    Remove archival of recording thumbnails

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 22.7.27
Beitrag von: SiLæncer am 27 Juli, 2022, 22:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Fixed occasional crashes of Xeoma’s server part after installation in Linux systems.

[close]

http://felenasoft.com/
Titel: Xeoma 22.8.16 Beta
Beitrag von: SiLæncer am 17 August, 2022, 19:00
Whats new:>>

    Fixed issue with web archives not showing in web browser interface.
    Fixed issue with Xeoma’s server part freezing at client connection attempts.

http://felenasoft.com/
Titel: Agent DVR 4.1.2.0
Beitrag von: SiLæncer am 22 August, 2022, 10:00
Whats new:>>

    Update to FFmpeg v5
    Update to .Net v6/ 4.8
    Linux/ OSX/ RPi platforms use native builds (no seperate .net core install)
    UI updates
    Minor bug fixes
    Faster ONVIF connect/ disconnect code
    Support new ONVIF discovery api
    Add support for native OSX ARM 64 (M1+)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.3.0
Beitrag von: SiLæncer am 22 August, 2022, 20:00
Whats new:>>

    Fix issue with licensing in .net core
    Fix issue with remote connections after .net 4.8 update

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.5.0
Beitrag von: SiLæncer am 31 August, 2022, 10:00
Whats new:>>

    Bug fixes
    Support more onvif devices (xml fault tolerance)
    Add switch for raw recording playback transforms
    Home Assistant profile switch fix

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.6.0
Beitrag von: SiLæncer am 02 September, 2022, 20:00
Whats new:>>

    UI updates
    Fix issue with linux updater
    Potential rare seg fault fix
    Don't error on no faces

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.7.0
Beitrag von: SiLæncer am 04 September, 2022, 11:00
Whats new:>>

    Fix memory leak.
    UI updates.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.8.0
Beitrag von: SiLæncer am 05 September, 2022, 19:00
Whats new:>>

    Fix issue with raw recording when camera timestamps are out of sequence
    Add option to recording settings to use system clock instead of stream clock for raw recording
    Fix issue with update script

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.1.9.0
Beitrag von: SiLæncer am 12 September, 2022, 13:00
Whats new:>>

Bug fixes.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.0.0
Beitrag von: SiLæncer am 13 September, 2022, 09:09
Whats new:>>

    Fix flush issue on encoder
    Add support for rtsp cameras that don't generate PTS/ DTS values
    Fix xml save/ load issue on linux

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.1.0
Beitrag von: SiLæncer am 14 September, 2022, 19:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Add content header to onvif for device compat
    Revert out-of-order packet code for raw recording
    Remove time limit on AI filter region code

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.3.0
Beitrag von: SiLæncer am 15 September, 2022, 09:09
Whats new:>>

    Update upgrade script for linux

4.2.2.0

    Fix issue with buffer
    Fix issue with raw timestamps
    Ignore motion level on non simple detectors

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.4.0
Beitrag von: SiLæncer am 16 September, 2022, 13:00
Whats new:>>

    Fix issue with disappearing cameras
    Fix issue with filename not merged into actions
    Add actions to enable / disable timelapse
    Add timelapse enable / disable to API
    Remove proxy block for business license
    Other bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.5.0
Beitrag von: SiLæncer am 20 September, 2022, 13:00
Whats new:>>

    Fix issue with digest authentication on some ONVIF devices
    move port.txt to Media/XML folder for persistance on docker

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.6.0
Beitrag von: SiLæncer am 26 September, 2022, 19:00
Whats new:>>

    Auto switch udp-tcp whilst reconnecting cameras
    Add auto filter option to views for filtering content based on selected device
    Add start-rtmp-view to api
    Add support for multiple AI servers (replaces override URL settings)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.7.0
Beitrag von: SiLæncer am 06 Oktober, 2022, 19:00
Changelog


    Bug fixes
    UI updates
    Add option to download trimmed files
    Much improved zoom UI (on files, time machine and live)
    Remove RTMP push from free features (sorry was getting to be a support headache)
    Add support for multiple RTMP servers
    Add RTMP controls to API
    Add RTMP default server controls to devices
    Add RTMP control panel to server settings menu
    Fix bug with built in MJPEG decoder
    Fix DST issue for sunrise/ sunset calculations
    Fix issue with Alert slot
    Flip and rotate photos taken from URL source
    Auto switch focused device in interval slot (with audio)

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.8.0
Beitrag von: SiLæncer am 07 Oktober, 2022, 21:00
Whats new:>>

Fix an issue with startup on windows

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.2.9.0
Beitrag von: SiLæncer am 09 Oktober, 2022, 19:00
Whats new:>>

    Fix memory leak on repeat reconnects
    Fix issue with stuck reconnect on MJPEG internal decoder
    Add FTP photo to AI options and object detect

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.0.0
Beitrag von: SiLæncer am 19 Oktober, 2022, 20:00
Changelog


    Add reveal button to password fields (hidden if permissions login)
    Database optimisations
    Add max files and max photos settings to local server (restricts the number of files sent to the client for improved rendering). Default is disabled (0). If there are more files to load a "load more" button displays on photos and recordings tab.
    Fix for accessing local audio devices on RPi.
    UI updates
    Fix for loading transparent png files on linux for overlays
    JPEG stream now supports multiple other image types. Renamed to Image.
    Added refresh interval settings for static images in image feed (for example to reload weather maps).

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.1.0
Beitrag von: SiLæncer am 20 Oktober, 2022, 06:00
Whats new:>>

Fix bug with database setup

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.2.0
Beitrag von: SiLæncer am 22 Oktober, 2022, 22:00
Whats new:>>

Fix issue with downloading archived files
Update version ID for netcore installs
Add option to SMTP settings to turn on/ off embedding images (also affects emails sent via ispyconnect services)
Add reload button for local device selects
Auto detect locale for email date time formatting
Use configuration locale for email date time formatting

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.3.0
Beitrag von: SiLæncer am 26 Oktober, 2022, 19:00
Whats new:>>

    Fix bug reading iSpyServer audio streams
    Fix bug with cut recording (+download option)
    Update schedule UI
    Add sunrise/ sunset/ days of week to PTZ scheduler
    Fix issue with downloading large files remotely

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 22.10.12
Beitrag von: SiLæncer am 29 Oktober, 2022, 20:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    USB joystick for PTZ camera control: Added the new ‘USB joystick for PTZ camera control’ Additional option that can be purchased if you have more PTZ cameras that you would like to control with a joystick or control board than your Xeoma Pro licenses allow for. Read more here
    Telegram Bot Notifications: Added the new ‘Telegram Bot Notifications’ destination module that can send automated notifications to a bot in the popular ‘Telegram’ messenger. Notifications can include custom text messages and pictures from the camera. This module is avaiable in Xeoma Pro and the Trial mode of Xeoma.
    Face Recognition: A new option to have an enhanced database is added to the AI feature of the ‘Face Recognition’ module. The enhanced database allows to fill in more information fields about the person, and has a people grouping capability. More about the module
    Object Recognizer: Increased accuracy of work of the ‘Object Recognizer’ Additional module. More about the module
    Text Recognizer: Added the new ‘Interval of detection’ option to the ‘Text Recognizer’ Additional module. The new option helps to set a timeout between camera image analysis, thus adapting the module to various use conditions (for example, to various movement speed of text objects in camera sight), which will aid in eliminating repeated recognition of the same text, and increasing the module accuracy rates. More about the module
    Text Recognizer: Enhanced visualization of recognized text in preview for the ‘Text Recognizer’ Additional module. It has become more accurate and stable. More about the module
    ANPR: Enhanced visualization of recognized license plates in the archive playback viewer for the ‘ANPR’ (License Plate Recognition) module, and fixed delays in displaying it.
    ANPR: Added support for recognition of Jordan license plates under Linux for the ‘ANPR’ module’s Additional package of countries with enhanced license plate recognition.
    ANPR: Added the option to use a list of license plates in a text file as a whitelist. When this option is on, Xeoma will be constantly synchronizing with the specified text file.
    ANPR: Added a new 1-hour trial for the ‘ANPR’ module’s Additional package of countries with enhanced license plate recognition. Now you will have the opportunity to test this enhanced option for free like any other Additional modules and options.
    Xeoma Pro: added support for the ‘Smoke Detector’ module’s fire detection feature under Linux.
    Xeoma Web Interface: Remastered and enhanced Xeoma web portal that is powered by the ‘Web Server’ module. Improved performance, security and page design, and added the ability to display pages in any of Xeoma’s main languages. If you need another language for Xeoma web portal in your project, please let us know!
    SD card synchronization: Enhanced synchronization of archives with recordings in a camera’s SD card. Fixed gaps in recordings, and added statistics on SD card utilization – it is now available in the Statistics section of the ‘Preview and Archive’ module settings.
    Universal Camera: the settings dialog of the ‘Universal Camera’ module now features a new option to open the camera’s web admin page in a default browser. Use this button to quickly apply some changes in camera settings through its browser admin panel (outside of Xeoma).
    Xeoma Web Interface: Increased loading speed of lengthy archives in Xeoma web portal that is powered by the ‘Web Server’ module.
    Xeoma Pro: Added a new ‘search_by_login_and_password’ command into Xeoma’s webAPI to launch search by IP address with set parameters.
    Xeoma Pro: Remastered the ‘start_rtsp_archive=&archive=’ option for broadcast of archives through RTSP from Xeoma’s webAPI. With this command, the broadcast starts after connection to the stream, as opposed to the previously implemented start after command execution.
    Scheduler: The Scheduler module now has a new option to stop fetching a camera stream if it’s non-working time according to the specified Scheduler settings. This option is a great aid in saving network bandwidth when the camera is not in use due to the schedule.
    Multi-server mode: The multi-server mode now displays all camera groups even when the servers to connect to have the same IP address with different ports.
    Multi-server mode: Added the option to control PTZ cameras with a joystick/control board even in the multi-server mode. More about this feature
    PTZ Tracking: Enhanced the accuracy of tracking with the ‘PTZ Tracking’ module.
    New processors added to the list of processors that are supported by Additional modules and features with limitations of equipment they can work on (Text Recognizer, Slip and Fall Detector, Eye Tracking, China and Japan license plate recognition with the ‘ANPR’ module’s Additional package of countries with enhanced recognition). Now, they can work on Intel Core 10+ generations, Intel Xeon E5-24 series, i5-2450M and i7-2600 CPU, too.
    Android: Enhanced work with permissions in the Xeoma server part in Android devices. Now the app asks only for those permissions that it needs at this moment.
    GPIO: Fixed loss of pins newly set up in the ‘GPIO’ module’s settings in Raspberry devices that used to happen after restart.
    Multi-server mode: Fixed loss of the newly arranged Pages order in the multi-server mode that used to happen after the client restart.
    Fixed occasional Fail > Install::installCoreAutostartOnly installation error in ARMv7 micro computers.
    Fixed work of modules that require download of additional components (e.g. ‘Object Recognizer’) when there are non-latin symbols in the path to Xeoma folder.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.3.4.0
Beitrag von: SiLæncer am 01 November, 2022, 06:00
Whats new:>>

    Fix a bug with timestamps of cut files
    Reduce sample interval of direct show local audio devices (remove delay)
    Update (fix) google drive authorization process
    Auto restart on select of different decoder
    Add API endpoints to enable/ disable detector

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.5.0
Beitrag von: SiLæncer am 01 November, 2022, 09:14
Whats new:>>

skip frames on corrupt images

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.6.0
Beitrag von: SiLæncer am 02 November, 2022, 09:09
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Fix bug with cutting same file multiple times
    Using 0 in storage management defaults to max limit
    Added support for including a base64 live grab in actions
    Fix issue when adding multiple actions
    Strip colons from generated filenames to fix potential issue with ffmpeg

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.7.0
Beitrag von: SiLæncer am 04 November, 2022, 13:00
Whats new:>>

    Fix memory leak on aborted file downloads
    Preserve zoom setting on playback of consecutive files with same camera
    Log schedule actions
    UI updates/ organization
    Add ONVIF logging switch for detector events to server settings

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.8.0
Beitrag von: SiLæncer am 04 November, 2022, 19:30
Whats new:>>

Fix ICE candidate bug for connection error

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.3.9.0
Beitrag von: SiLæncer am 23 November, 2022, 11:30
Whats new:>>

    Fix audio streaming endpoint issue
    Add load more to time machine UI if load restricted
    Update location selection for time zones with map control
    Don't revert GPU-CPU permanently on decode failure
    Fix issue with linux based admin scripts
    Add support for video snapshots to be sent in push messages to IOS

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.4.1.0
Beitrag von: SiLæncer am 29 November, 2022, 10:00
Whats new:>>

Increase default timeout for signalr connection and add it to config.xml

4.4.0.0

    Add native support for SSL certificates and passwords for Linux/ OSX
    Add file format setting to recording for audio devices (MP3/ OGG/ WAV)
    Add crop option for AI filter and Object detector (will cut out detected objects in photos).

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 22.12.5
Beitrag von: SiLæncer am 06 Dezember, 2022, 19:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Remote access: Innovation in remote access from different networks: now Xeoma can do the client-to-server connection through P2P, without the need to have a ‘public’ IP address on the server. This new connection method is supported in all Xeoma editions (except for the Free edition that doesn’t support any type of remote access) and all supported operating systems. The technology is simple: an intermediary cloud server is used to interconnect the client and the server part, and right after connection they communicate directly, without sending camera streams, settings, etc. to the P2P intermediary. Read more here
    Xeoma Pro: Added the new possibility to Xeoma’s PTZ control to rotate and zoom in the camera to an object or an area by click. Previously, this mechanism has been available in the ePTZ (digital zoom) feature exclusively; now it is available for cameras with PTZ capabilities. After clicking on a special button in Xeoma’s PTZ control, you will be able to select an area with a mouse (or click on a place) in camera image to have the PTZ camera rotate there and zoom in on it to fit the screen. This feature is available with the Xeoma Pro license. See more about all PTZ options in Xeoma here
    Added switching to Trial versions for all Xeoma commercial editions (Xeoma Starter, Xeoma Lite, Xeoma Standard and Xeoma Pro) right from Xeoma interface. Previously, Xeoma could only be switched to the Trial version of the Xeoma Pro edition from within its interface. This change will come in handy if you are interested in a certain Xeoma edition, and would like to test if this edition satisfies your needs.
    Motion Detector: For ONVIF-compliant cameras the new option is added to use a camera’s built-in motion detector instead of Xeoma’s. This will help to shift some of the CPU load on to the camera’s side or to get an alternative detector if Xeoma’s doesn’t suit you for any reason. Previously, this could have been done with the ‘Camera-Embedded Detector’ module; now it’s available right from the ‘Motion Detector’ module settings.
    Terminal/console: added support for additional parameters that you can input while using the installation command in console. The parameters will be automatically added to the autostart script without the need for you to edit it manually any more, as it was the case before. For example, if -install -coreauto -serverport 8888 is executed, the autostart script will have the -serverport 8888 parameter added automatically. See supported console commands
    Added hotkeys to quickly scale the Xeoma interface which previously has been possible only with the Layouts menu. Use a combination of CTRL and + or mouse wheel up to make all elements larger, and CTRL and – or mouse wheel down to make all elements smaller.
    JSON API/Web Server: The broadcasting of archive recordings over RTSP that has been added in version 22.8.16 now works in 32-bit Linux systems as well.
    RTSP Broadcasting: The ‘RTSP Broadcasting’ module now features the choice of a tool to use for broadcasts: the traditional ffserver that has more options and more operating systems supported, or the newer and more stable live555 that works only on 32- and 64-bit Windows and Linux.
    Unitor: The ‘Unitor’ module now has the option to choose which of the combined cameras with support for PTZ should accept PTZ commands.
    Telegram Bot Notifications: Improved stable work, fixed occasionally missing messages sent by the new ‘Telegram Bot Notifications’ module.
    Multi-server mode: Added support for PTZ control for OMNY cameras.
    Multi-server mode: Added support for PTZ presets as well as setting up speed of PTZ tours (as in the regular mode, a Xeoma Pro license is required for the PTZ presets and tours functionality).
    Android: Optimized permissions for the client part in Xeoma Android app. Also, fixed the issue with no longer displaying the permission dialog after two rejections in OS Android 12.
    Android: Optimized interface and its elements in Xeoma Android app. Now, using Xeoma in Android devices with a small screen is made far more convenient.
    Fixed camera search at the first launch of the program. Previously, when Xeoma was launched for the first time and it was looking for cameras with the ‘Search by IP/password’ option, it might have missed cameras and find them only with the second search.
    Web server: Enhanced Xeoma web interface. Fixed minor issues with browsers’ dark themes and with displaying some of the interface elements.
    Web server: Download of the ‘Problems Detector’ log file through Xeoma web interface is made available again.
    Fixed crash under Android when the Multi-server mode was used.
    Fixed the issue with saving settings for a USB joystick control of PTZ cameras in the Multi-server mode.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.4.2.0
Beitrag von: SiLæncer am 08 Dezember, 2022, 11:00
Whats new:>>

    Input validation
    UI speedup for editing
    Fix issue with mjpeg ignoring maintainAR parameter
    Add new PTZ patrol feature
    Add option to display times in server time or local time to UI (to account menu - theme settings)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.4.3.0
Beitrag von: SiLæncer am 08 Dezember, 2022, 12:00
Whats new:>>

Fix a crashing bug on OSX/Linux

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.4.4.0
Beitrag von: SiLæncer am 17 Dezember, 2022, 10:00
Whats new:>>

    Fix memory leak when restricting number of files to UI
    Add specific date option to scheduler
    Add new format option to MJPEG streamer
    Update UI for PTZ controller (and add top 9 alphanumeric presets)
    Add option to ONVIF settings to restrict directional controls for cameras that only support up/down/left/right.
    Bug fixes.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.4.5.0
Beitrag von: SiLæncer am 22 Dezember, 2022, 21:00
Whats new:>>

    Roll back some connection changes that seem to have introduced some rare issues
    Add support for new API
    Add connection troubleshooting settings to server settings (option to wait on startup for connection and specify the connection method).
    Ignore audio instead of abort on raw recordings when audio codec is not supported by ffmpeg.
    Remove check for running instance at startup.
    Translations update

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.1.25 Beta
Beitrag von: SiLæncer am 26 Januar, 2023, 22:00
Whats new:>>

    Bird Detector: is a module based based on artificial intelligence that detects birds in the camera’s field of view and helps you keep track of them. This module is designed for use on thermal Pan-tilt-zoom cameras, but it can also be used on fixed thermal cameras. Available in Xeoma Pro and Trial edition of Xeoma Pro
    Telegram Bot Notifications: The module is now available not only in Xeoma Pro but also in Xeoma Standard.
    Motion Detector: fixed an occasional reset of the set sensitivity threshold value.
    Fixed occasional crashes when CTRL+Z was used in edit boxes.

https://felenasoft.com/
Titel: Agent DVR 4.4.8.0
Beitrag von: SiLæncer am 03 Februar, 2023, 11:00
Changelog


    Updated AI modes (full AI re-write)
    Removed Alert Filter (Added alert trigger settings to Object Recognition)
    Upgraded detector Zones system to support up to 5 different zones
    Added AI Detector as Alert Mode option
    Added live overlay for AI detectors
    Added photos options for all AI detectors
    Added users and permissions subsection to server settings (for licensed version)
    Added support for custom logos to server settings (for licensed version)
    Added login UI for users
    Added option to set the maximum number of sessions to server settings - local server
    Added skip to Content option to server settings - playback which will auto skip to the first motion event on playback of recordings.
    Added LPR via CodeProject.AI
    Added enhance Photos UI (super resolution) via CodeProject.AI
    Added full UI to administer CodeProject.AI server from Agent DVR
    Added options to test AI servers
    Added AI module discovery to Object Recognition
    Added transparency to timestamp and overlays
    Added option for auto font size to timestamp settings
    Bug fixes
    Updated Userguide

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.4.9.0
Beitrag von: SiLæncer am 04 Februar, 2023, 11:00
Whats new:>>

    Resolve some issues with photos and enhance
    Add action option to send push notifications
    Add ability to merge in AI tags with text-to-speech actions

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.0.0
Beitrag von: SiLæncer am 14 Februar, 2023, 20:00
Whats new:>>

    Updated AI code (filter moved to actions - see userguide, you may need to check your settings after the update)
    Added AI sound recognition
    Added Face Not Recognized event
    Fixed settings upgrade
    Bug fixes
    Added Swedish translations

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.1.0
Beitrag von: SiLæncer am 15 Februar, 2023, 11:30
Whats new:>>

    Fix object recognition settings upgrade
    Other bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.2.0
Beitrag von: SiLæncer am 17 Februar, 2023, 19:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Tuning updates for object recognition.
    Fix bug where AI down results in constant alert state.
    Update MJPEG feed to return cameras in requested order.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.3.0
Beitrag von: SiLæncer am 25 Februar, 2023, 19:00
Whats new:>>

    Add option to object recognition settings to ignore static objects
    Update SMTP mailer
    Fix bug with FTP when rename option checked
    Add setting to disable update check
    Add "This Device" to trigger actions so actions can be copied efficiently
    Work around bug in CodeProject.AI face recognition
    Default timeout changed for AI server testing
    Update Sources
    M3U8 connection updates
    Add action reset timeout setting

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.4.0
Beitrag von: SiLæncer am 28 Februar, 2023, 19:00
Whats new:>>

    Fix crash bug when some feeds fail to connect
    PTZ UI updates
    Add camera error information to display if connection fails.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.5.0
Beitrag von: SiLæncer am 06 März, 2023, 20:00
Whats new:>>

    Bug fixes:

    Add support for Actions to have multiple tasks associated to them
    Add lang parameter to url for force-choosing language eg /?lang=fr
    Add support for AND/ OR to action tag matching
    Mailer support for no authentication
    Add support for action on/off/run to API
    Object recognition upgrade to check corners as well as center of area

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.6.0
Beitrag von: SiLæncer am 08 März, 2023, 19:00
Whats new:>>

    Upgrade alerts display (bigger images, next, previous, timeline, delete).
    Add play link to alerts that plays the associated recording if available
    Fix bug with AI photos (taking photo when detected object below confidence limit)
    Set defaullt limits on photos and files in local server settings (local server settings)
    Add max alerts limit to server setttings
    Remove repeat push debug message

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.8.0
Beitrag von: SiLæncer am 09 März, 2023, 18:00
Whats new:>>

Fix an issue with shortcut keys.

4.5.7.0

    Fix a bug with motion detection when using a tracking detector
    Add ability to edit tasks assigned to actions
    Add option to themes to switch between different PTZ controllers
    Fix bug with URL and email action tasks
    Some other minor UI updates

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.5.9.0
Beitrag von: SiLæncer am 20 März, 2023, 19:00
Whats new:>>

    Add PTZ preset access to API
    Add volume control (not available on IOS)
    Add SSL switch to reolink AI API
    Add OpenDrive as a cloud upload target
    Upgrade audio visualizations, improve audio visualisation CPU usage
    Add MQTT raw image push
    Modify {Base64Image} tag to only send base64 data in MQTT
    General rename of IP Camera to Network Camera
    Bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.0.0
Beitrag von: SiLæncer am 22 März, 2023, 11:00
Whats new:>>

    RTMP updates
    Add start/ stop RTMP to action tasks
    UI updates
    Add [ZONE] to action merge tags
    Fix issue with alert blocked when AI server down
    Bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.3.22 Beta
Beitrag von: SiLæncer am 23 März, 2023, 08:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Xeoma Pro: Added a unique feature to open recordings that are stored in a DVR or a camera’s SD card and play them in the Xeoma player. This new feature only works for ONVIF-compliant devices, of which we recommended ones made by HikVision. To open the “ONVIF archive” for a camera, connect it to Xeoma, go to Xeoma’s archive viewer by clicking the “Play” button for this camera, and select the “Play ONVIF archive” item in the archive viewer menu.
    LDAP: Added an option to log in with LDAP user profile credentials through Xeoma’s web interface. Like with logging in through a web browser with a Xeoma’s user profile data, the LDAP user will see the cameras and features configured for their profile.
    LDAP: Added LDAP integration with FreeIPA, a Linux-based identity management system similar to Microsoft’s Active Directory.
    Mobile Notifications: Improved sending of mobile notifications on Android. Now, by clicking on the incoming notification, Xeoma opens in the archive with the moment that triggered the notification.
    Cross-Line Detector: Added the ability to work in conjunction with “Face Recognition”, “Reading QR Codes” and “Text Recognition”. Connect the filter module in front of the Line Crossing Detector so that only line crossings are considered as necessary objects.
    USB Joystick: A new joystick mode has been added, where you can set a button that will switch cameras in turn on the selected tab and return to the tab overview.
    Archive player: Added reverse playback of recordings in Xeoma’s archive player. Available for both MJPEG and H264 recordings, including the “smaller” archive (lower quality saved with parallel recording).
    Archive player: Added hotkeys for the new reverse playback function. Now you can use the keyboard’s “+” to engage regular forward playback, or “-” to enable reverse playback.
    Archive player: Fixed long loading of records after restarting the server. Reading information about records from the database has been accelerated, so you can now enter the archive player much faster after restarting the server.
    Export: Added a new format – wav – to the Export dialog of the Xeoma’s archive player. This format will help you export an extract with just sound, no video.
    Archive: Improved auto-selection of remaining free disk space for records set with the global “Always leave free disk space” setting. Now, if the value of this setting has been changed manually, the newly set value will be used. If this is not done, then the automatically set value recommended by the program will be used.
    Archive player: Improved frame-by-frame scrolling of recordings in Xeoma archive player. Now moving around has become more smooth and stable.
    Archive player: Improved smoothness when dragging the slider on the timeline by making sure all frames are displayed.
    Secure connection: The “Enable secure https connection” option has been added to the “Web Server” module to enable connection encryption through the browser. Now a secure connection can be selected directly in the settings, there is no need to configure it outside of Xeoma, as before. Selected the option in the module and use Xeoma’s self-signed certificate – or place your own SSL certificate in the path indicated next to the option (the path itself is not editable).
    Added the option to view passwords hidden by asterisks. In order to view such a hidden password, click on the “crossed eye” icon in the right corner of the field. In order to hide the password back, click on the icon again (in the password display mode, the “crossed eye” changes its look to just “eye”). This is available in all dialogs where there are hidden passwords, both for the Administrator and for operators who have access to settings.
    Eye Tracking: Added the option to save CSV reports that will have date and time of triggering events. As always, these reports can be used for analysis, graphs building, or integration with third-party systems.
    GPIO: Added the option to configure and use multiple pins at once.
    Cross-Line Detector: Added a new option to display crossing statistics for a specified period. The calculation is based on module’s CSV reports.
    Sending Email: Added the option to select the language for messages sent from the “Motion Detector” or “Problems Detector” modules. Previously, all messages were in English only.
    Sending Email: Added the option to enable logging of module operation. This will be a great tool to keep tabs on stability of the module, especially if the program works offline with notifications of critical events. To do this, use the “Record found issues into a log file” option in the module settings. By default, both errors and successful sending events will be logged, but you can choose to log only sending errors due to issues in communication with the sending server.
    Problems Detector: New options have been added to fine-tune the “Camera image too dark” option, which will help you get notified if the camera becomes obscured without getting false alarms.
    Motion Detector: Improved selection of the detection zone in the Motion Detector if the aspect ratio in the low and the high resolution streams is different. Modules with a monitoring zone, including Motion Detector, will now show one for the stream that is selected for operation (by default, it is the Preview stream, and if the option “Use the high resolution stream from archive” is checked, then it will be the Archive stream).
    Web Server: Optimized webRTC performance with Edge browser.
    Problems Detector: Added the ability to download the log file via the client. Now the log file can be obtained even with a remote connection.
    Customization/rebranding: Fixed disappearance of the name of the customized version after updating Xeoma via the program menu.
    Remote access: Fixed issues with enabling remote access on a server in Trial version of any edition.
    LDAP: Fixed a problem with a long server start with a configured LDAP server if this LDAP server is temporarily unavailable.
    Motion Detector: Fixed an occasional RAM leak when the “People Recognition” or “Car Recognition” options are being used in the “Motion Detector” module.
    Xeoma Pro Your Cloud: Fixed authorization error in the web portal using WebServerLogin and WebServerPassword parameters from user configs.
    Pages: Improved functionality for importing tabs in multi-server mode to eliminate occasional disappearance of tabs.
    Pages: Fixed the issue with changing user permissions at addition of new tabs that recurred if the affected users did not have permission to access the new tab. Now, to update the rights after editing the tabs, you will need to go to the rights configuration and select the necessary rights.
    Archive player: Fixed a problem with the positioning and movement of the slider on the timeline when playing archive recordings of some cameras.
    Archive player: Fixed occasional crashes at deletion of an empty interval in an archive.
    Archive player: Fixed discrepancies in time of records in the archive when using the time zone GMT -02:30.
    Universal Camera: Improved dialog for camera configuration via ONVIF. The displayed information is now more accurate.
    Camera-Embedded Detector: Fixed occasional crashes when working with the “Camera-Embedded Detector” module.
    Visitors Counter: Fixed occasional crashes when working with the “Visitors Counter” module.
    Sound Alarm: Fixed overlapping of two sounds in the “Sound Alarm” module if both the server and client parts of Xeoma are running on the same computer.
    Web Server: Fixed the “Failed conversion” issue that would appear during export through the web interface because of inaccurate display of intervals of recordings available for export.
    Fixed the false “Server certificate is not trusted” error when connecting to a Xeoma server running on Android.
    Fixed occasional crashes of the program when working with the log viewer dialog on the client, which occurred when there were a large number of log files.
    Fixed the issue where the size of the Xeoma window would not change on tablets running Windows OS or a Windows-powered computer with a touchscreen monitor.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.6.1.0
Beitrag von: SiLæncer am 23 März, 2023, 21:00
Whats new:>>

Fix bug with translations

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.3.0
Beitrag von: SiLæncer am 25 März, 2023, 21:00
Whats new:>>

4.6.3.0   

Fix issue with Reolink AI integration   3/25/2023

4.6.2.0   

Fix bug with multiple action tasks filtering zone list
Add support for http based digest authentication on ONVIF devices

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.4.0
Beitrag von: SiLæncer am 26 März, 2023, 21:00
Whats new:>>

Fix bug with applying profile on arm from UI not applying home profile.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.5.0
Beitrag von: SiLæncer am 29 März, 2023, 19:00
Whats new:>>

Fix bug with applying profile on arm from UI not applying home profile.Add go to preset task option
Keep onvif connections alive so PTZ works via commands when camera disabled
Only fire enable event when response received from device
UI updates to Alert Summary
Show historical limits on audio visualization
Add switch to block alerts when AI server is down
Add talk to user permissions

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.6.0
Beitrag von: SiLæncer am 01 April, 2023, 11:00
Whats new:>>

    Fix issue with opendrive
    Reolink AI detector now raises object found events and tags alerts
    Fall back to load backup objects file if objects file is corrupted

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.7.0
Beitrag von: SiLæncer am 10 April, 2023, 20:00
Changelog


    Add Web Browser source type
    UI updates
    Add PTZ support to floor plans
    Add arm/ disarm trigger to actions
    Add some logging output to storage manager
    Add variable distance check options to object tracking (check corners). Instead of checking the corners of bounding boxes on AI and object detection areas, Agent will now check a set distance limit from the center point. See Check Corners in object recognition and other AI tabs and tracking detectors for more info.
    Add detected Audio tags and confidence to microphone visualizations (overlay checkbox in AI sound recognition configuration).
    Add Icons to devices on general tab for display on floorplans.

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.8.0
Beitrag von: SiLæncer am 11 April, 2023, 19:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

Fix bug with zone filtering

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.6.9.0
Beitrag von: SiLæncer am 12 April, 2023, 20:00
Whats new:>>

    Fix bug with handling empty zone list
    Add recognized sound overlay option to camera audio view
    Cache base64 jpegs for 1 second to reduce load

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.0.0
Beitrag von: SiLæncer am 20 April, 2023, 11:00
Whats new:>>

    Add test button to add camera wizard
    Add default option to filters (name one default to apply on load)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.2.0
Beitrag von: SiLæncer am 24 April, 2023, 19:00
Whats new:>>

4.7.2.0   

Fix issue with ffmpeg version on linux   

4.7.1.0   

Fix bug with setting up remote access when local user account created
Fix bug with action zones and using no object found event
Update ffmpeg code to remove all deprecated code
Fix bug with visualization on audio recording playback

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.3.0
Beitrag von: SiLæncer am 09 Mai, 2023, 19:00
Whats new:>>

    Upgrade to FFMPEG v6 - Backup your current install!
    Add Trigger Recording action (with timeout)
    Bug fixes
    Remove Linux 32 bit ARM version (no compatible version of ffmpeg available)
    Add indexeddb support in local browsers for image caching

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.4.0
Beitrag von: SiLæncer am 10 Mai, 2023, 19:00
Whats new:>>

    Bump FFmpeg 6 version that was crashing on missing GPU drivers
    Add TURN server option to local server settings

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.6.0
Beitrag von: SiLæncer am 09 Juni, 2023, 10:00
Whats new:>>

    Bug fixes
    Add Agent DVR remote talk feature (talk to other instances of Agent DVR over the network)
    Add authentication to logs.html
    Fix issue with AI run on motion throttling
    Logging overhaul
    Remove locks / restructure internals
    Add parameters for auto login on local (pass un=xxx&pwd=xxx)
    Fix issue with RTMP audio streaming
    Add use photo url option to FTP
    Update CPAI integration
    Add SDL talk for local talk support on Linux / OSX
    Add support for RTMP main stream (HD) playback

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.6.14 Beta
Beitrag von: SiLæncer am 15 Juni, 2023, 22:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Freight Unloading Counter: Added the new ‘Freight Unloading Counter’ filter module that can be used to track how many loadouts a freight vehicle has done in a shift. The same freight vehicle is recognized by a unique number on its side (min. 2 digits long). Such gathered information on unloading can be passed on to the ‘Marking’ module for overlaying over camera image. Read more
    Added new licensing model for the ‘Object Recognizer’ Additional module! Now, in addition to usual licenses for recognizing objects of the desired type (drones and airplanes / seabirds / people, vehicles, animals and others), this module will also accept a new, universal license that will allow you to use any type of objects you need. A new license is purchased for the number of cameras on the server that will use the “Object Recognizer” module multiplied by the number of different types of objects. See more in the Object Recognizer Setup Guide
    P2P: Added support for P2P connection in the ‘HTTP Upload to Other Xeoma‘ and ‘HTTP Receiver‘ modules.
    Preview and Archive: Added the new ‘Latest position (global)’ choice in the Xeoma Archive Viewer’s ‘Start position’ option. This new option will make it easier to watch archive recordings of an event across different cameras in Xeoma’s Archive Viewer since recordings will be starting playback in the same date and time spot.
    Preview and Archive: Improved view of archive recordings in Xeoma’s Archive Viewer after server restart. Now recordings will become available as soon as their own re-indexing is finished, so you do not have to wait until full re-indexing is completed.
    Accelerated auto search and addition of cameras.
    Accelerated the speed to Xeoma server start.
    Added the option to disable or enable attempts to match generic passwords with cameras during Xeoma’s auto search for cameras.
    Supported operating systems: Added support for HarmonyOS. You can download Xeoma for HarmonyOS from the Huawei AppGallery store or from our Download page.
    Rebranding: Added the new <Email> block to the rebranding/customization tool that can be used to embed information on where to send an email with a screenshot after the ‘Screenshot’ button is clicked, and to make this data protected from changing.
    Rebranding: Added the new ‘MessageTextColor’ and ‘MessageBackColor’ parameters to the rebranding/customization tool that can be used to change font color and background color for the warnings in the bottom right corner of camera’s preview boxes (for example, the system health messages from ‘Problems Detector’).
    Motion Detector: Added a new option to set the required accuracy level of the humans or cars recognition option in ‘Motion Detector’. This will help to fine tune the setting to match your environment and get rid of alarms caused by lower recognition accuracy.
    Parking Spots: Improved quality of work of the ‘Parking Spots’ and ‘HTTP Request Sender’ modules combination. Now the module can get and send information about the ‘Free’ status instead of just the ‘Occupied’ status.
    PTZ: Improved accuracy of camera rotation with the recently added ‘PTZ by click’ option.
    Xeoma Pro: Improved speed and smoothness of recordings playback in the simultaneous archive view mode.
    Mobile notifications: Fixed the issue where notifications from ‘Problems Detector‘ wouldn’t arrive in the ‘Mobile Notifications’ module.
    Preview and Archive: Improved smoothness and speed of playback at minimum speed in the Xeoma’s Archive Viewer (the so called frame-by-frame view).
    JSON API: Improved the search command that is used for camera search automation – now it displays an error when a camera couldn’t be added.
    Web Server: Fixed incorrect display of several checkboxes in Xeoma web interface when using a browser’s ‘white theme’.
    P2P: Fixed an issue with P2P connection to a server machine that uses an unusual certificate.
    Eliminated creation of excessive backup files for Xeoma settings by ‘Problems Detector’.
    Xeoma Pro Your Cloud: Fixed the issue with the MultiArchivePaths parameter (used to distribute user data across several folders or disks), where new information in this parameter wouldn’t apply after the first restart.
    Fixed authorization issues in ‘HTTP Marking’, “HTTP Switcher”, “HTTP Receiver”.
    QR Code Recognition: Fixed issues with false triggering and excessive lines in CSV reports by this module when QR code is nowhere in sight.
    Fixed the issue with interface elements overlaying each other in the ‘Active licenses’ dialog (Main menu -> Information -> Active licenses).
    Fixed the issue with the CTRL button getting ‘stuck’ after being used in the ‘Active licenses’ dialog, which resulted in interface scaling up or down whenever mouse wheel was used even outside of this dialog.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.7.7.0
Beitrag von: SiLæncer am 23 Juni, 2023, 20:00
Whats new:>>

    Add WyzeBridge PTZ support (make sure your camera name matches the camera name in WyzeBridge. Choose WyzeBridge on PTZ tab and specify the port WyzeBridge is using).
    Add Amazon S3 cloud upload
    Fix issues with DropBox
    Add ONVIF http digest fixes for linux/ osx
    Workaround issue in ffmpeg 6 with m3u8 sources
    Fix issues with ONVIF Talk

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.8.0
Beitrag von: SiLæncer am 24 Juni, 2023, 19:00
Whats new:>>

    Fix bug with raw recording
    Fix some onvif bugs
    Add warning about action for AI triggers
    Fix bug with dropbox

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.7.9.0
Beitrag von: SiLæncer am 25 Juni, 2023, 20:00
Whats new:>>

Fix bug with ONVIF http digest auth on linux

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.0.0
Beitrag von: SiLæncer am 27 Juni, 2023, 21:00
Whats new:>>

More ONVIF updates

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.1.0
Beitrag von: SiLæncer am 30 Juni, 2023, 20:00
Whats new:>>

Add support for onvif devices without authentication
Add HTTP port override setting for ONVIF JPEG support on external networks

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.7.4 Beta
Beitrag von: SiLæncer am 05 Juli, 2023, 20:00
Changelog


    Added new licensing model for the ‘Object Recognizer’ Additional module! Now, in addition to usual licenses for recognizing objects of the desired type (drones and airplanes / seabirds / people, vehicles, animals and others), this module will also accept a new, universal license that will allow you to use any type of objects you need. A new license is purchased for the number of cameras on the server that will use the “Object Recognizer” module multiplied by the number of different types of objects. See more in the Object Recognizer Setup Guide
    P2P: Added support for P2P connection in the ‘HTTP Upload to Other Xeoma‘ and ‘HTTP Receiver‘ modules.
    Preview and Archive: Added the new ‘Latest position (global)’ choice in the Xeoma Archive Viewer’s ‘Start position’ option. This new option will make it easier to watch archive recordings of an event across different cameras in Xeoma’s Archive Viewer since recordings will be starting playback in the same date and time spot.
    Preview and Archive: Improved view of archive recordings in Xeoma’s Archive Viewer after server restart. Now recordings will become available as soon as their own re-indexing is finished, so you do not have to wait until full re-indexing is completed.
    Accelerated auto search and addition of cameras.
    Accelerated the speed to Xeoma server start.
    Added the option to disable or enable attempts to match generic passwords with cameras during Xeoma’s auto search for cameras.
    Supported operating systems: Added support for HarmonyOS. You can download Xeoma for HarmonyOS from the Huawei AppGallery store or from our Download page.
    Rebranding: Added the new <Email> block to the rebranding/customization tool that can be used to embed information on where to send an email with a screenshot after the ‘Screenshot’ button is clicked, and to make this data protected from changing.
    Rebranding: Added the new ‘MessageTextColor’ and ‘MessageBackColor’ parameters to the rebranding/customization tool that can be used to change font color and background color for the warnings in the bottom right corner of camera’s preview boxes (for example, the system health messages from ‘Problems Detector’).
    Motion Detector: Added a new option to set the required accuracy level of the humans or cars recognition option in ‘Motion Detector’. This will help to fine tune the setting to match your environment and get rid of alarms caused by lower recognition accuracy.
    Parking Spots: Improved quality of work of the ‘Parking Spots’ and ‘HTTP Request Sender’ modules combination. Now the module can get and send information about the ‘Free’ status instead of just the ‘Occupied’ status.
    PTZ: Improved accuracy of camera rotation with the recently added ‘PTZ by click’ option.
    Xeoma Pro: Improved speed and smoothness of recordings playback in the simultaneous archive view mode.
    Mobile notifications: Fixed the issue where notifications from ‘Problems Detector‘ wouldn’t arrive in the ‘Mobile Notifications’ module.
    Preview and Archive: Improved smoothness and speed of playback at minimum speed in the Xeoma’s Archive Viewer (the so called frame-by-frame view).
    JSON API: Improved the search command that is used for camera search automation – now it displays an error when a camera couldn’t be added.
    Web Server: Fixed incorrect display of several checkboxes in Xeoma web interface when using a browser’s ‘white theme’.
    P2P: Fixed an issue with P2P connection to a server machine that uses an unusual certificate.
    Eliminated creation of excessive backup files for Xeoma settings by ‘Problems Detector’.
    Xeoma Pro Your Cloud: Fixed the issue with the MultiArchivePaths parameter (used to distribute user data across several folders or disks), where new information in this parameter wouldn’t apply after the first restart.
    Fixed authorization issues in ‘HTTP Marking’, “HTTP Switcher”, “HTTP Receiver”.
    QR Code Recognition: Fixed issues with false triggering and excessive lines in CSV reports by this module when QR code is nowhere in sight.
    Fixed the issue with interface elements overlaying each other in the ‘Active licenses’ dialog (Main menu -> Information -> Active licenses).
    Fixed the issue with the CTRL button getting ‘stuck’ after being used in the ‘Active licenses’ dialog, which resulted in interface scaling up or down whenever mouse wheel was used even outside of this dialog.
    Fixed the software crash that would happen at attempts to add a Dahua camera.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.8.2.0
Beitrag von: SiLæncer am 08 Juli, 2023, 20:00
Whats new:>>

    Update imaging library
    Add support for SSL to ONVIF
    Add workarounds to ONVIF to support some non-conforming devices
    UI updates - add live skip back and links to device specific recordings and photos
    Add back support to UI for SPA navigation
    Replace icons with textual information on live display and video feeds
    Fixes for compatiblity with ARM 32 bit on Docker

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.3.0
Beitrag von: SiLæncer am 10 Juli, 2023, 10:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

    Fix some minor ui bugs
    Close dialogs on back pressed
    Playback timing updates

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.4.0
Beitrag von: SiLæncer am 17 Juli, 2023, 20:00
Whats new:>>

    Update image resizing code (use more efficient algorithm)
    Add Use High Performance Resize option to system settings - playback which will use a very fast resizer but also will result in some loss of visual quality.
    Fixed an issue with the MJPEG internal decoder
    Fixed an issue with FFMPEG buffer alignment
    Added AI down and AI up events. These events are throttled to 1 every 60 seconds.
    Fixed issue with ONVIF PTZ configuration setup
    Added variable speed control to PTZ controller in digital and onvif modes.
    Gamepad and virtual joystick PTZ controls now support variable speed.

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.6.0
Beitrag von: SiLæncer am 19 Juli, 2023, 20:00
Whats new:>>

    Couple of UI bug fixes

4.8.5.0

    Add ffmpeg installer page
    Add markers for timelapse and regular recordings on timeline view
    Fix some minor bugs with PTZ controller

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.7.0
Beitrag von: SiLæncer am 20 Juli, 2023, 20:00
Whats new:>>

    Fix PTZ issue
    Playback optimizations
    Fix issue with 32 bit ARM download

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.8.8.0
Beitrag von: SiLæncer am 21 Juli, 2023, 19:00
Whats new:>>

Increase download timeout for ffmpeg install

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.0.0
Beitrag von: SiLæncer am 28 Juli, 2023, 19:00
Changelog


    Fix issue with reconnecting to some ONVIF event streams
    Add ability to add/ edit/ delete motion zone area configurations
    Add action to apply motion area configuration
    Add task to set PTZ presets on devices
    Added action to run when PTZ Preset is called
    (so you can apply motion detection areas based on PTZ preset)
    Add schedule actions to apply motion areas
    Update object tracking detectors to raise events in motion zone areas
    UI updates/ minor bug fixes
    Add option to local server to use SSL only
    Add change password to local users account menu
    Fix bug with loading in config when media location is unavailable resetting configuration (now logs error instead)
    Optimise resize of video when browser resized.
    Update userguide

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.1.0
Beitrag von: SiLæncer am 29 Juli, 2023, 19:00
Whats new:>>

Update to stream resizer

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.3.0
Beitrag von: SiLæncer am 04 August, 2023, 19:00
Whats new:>>

Fix issue with windows installer.

4.9.2.0

    Fix bug with duplicate alert events
    Fix bug with merging dates into json packets in actions

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.8.4 Beta
Beitrag von: SiLæncer am 04 August, 2023, 21:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Added new licensing model for the ‘Object Recognizer’ Additional module! Now, in addition to usual licenses for recognizing objects of the desired type (drones and airplanes / seabirds / people, vehicles, animals and others), this module will also accept a new, universal license that will allow you to use any type of objects you need. A new license is purchased for the number of cameras on the server that will use the “Object Recognizer” module multiplied by the number of different types of objects. See more in the Object Recognizer Setup Guide
    P2P: Added support for P2P connection in the ‘HTTP Upload to Other Xeoma‘ and ‘HTTP Receiver‘ modules.
    Preview and Archive: Added the new ‘Latest position (global)’ choice in the Xeoma Archive Viewer’s ‘Start position’ option. This new option will make it easier to watch archive recordings of an event across different cameras in Xeoma’s Archive Viewer since recordings will be starting playback in the same date and time spot.
    Preview and Archive: Improved view of archive recordings in Xeoma’s Archive Viewer after server restart. Now recordings will become available as soon as their own re-indexing is finished, so you do not have to wait until full re-indexing is completed.
    Accelerated auto search and addition of cameras.
    Accelerated the speed to Xeoma server start.
    Added the option to disable or enable attempts to match generic passwords with cameras during Xeoma’s auto search for cameras.
    Supported operating systems: Added support for HarmonyOS. You can download Xeoma for HarmonyOS from the Huawei AppGallery store or from our Download page.
    Rebranding: Added the new <Email> block to the rebranding/customization tool that can be used to embed information on where to send an email with a screenshot after the ‘Screenshot’ button is clicked, and to make this data protected from changing.
    Rebranding: Added the new ‘MessageTextColor’ and ‘MessageBackColor’ parameters to the rebranding/customization tool that can be used to change font color and background color for the warnings in the bottom right corner of camera’s preview boxes (for example, the system health messages from ‘Problems Detector’).
    Motion Detector: Added a new option to set the required accuracy level of the humans or cars recognition option in ‘Motion Detector’. This will help to fine tune the setting to match your environment and get rid of alarms caused by lower recognition accuracy.
    Parking Spots: Improved quality of work of the ‘Parking Spots’ and ‘HTTP Request Sender’ modules combination. Now the module can get and send information about the ‘Free’ status instead of just the ‘Occupied’ status.
    PTZ: Improved accuracy of camera rotation with the recently added ‘PTZ by click’ option.
    Xeoma Pro: Improved speed and smoothness of recordings playback in the simultaneous archive view mode.
    Mobile notifications: Fixed the issue where notifications from ‘Problems Detector‘ wouldn’t arrive in the ‘Mobile Notifications’ module.
    Preview and Archive: Improved smoothness and speed of playback at minimum speed in the Xeoma’s Archive Viewer (the so called frame-by-frame view).
    JSON API: Improved the search command that is used for camera search automation – now it displays an error when a camera couldn’t be added.
    Web Server: Fixed incorrect display of several checkboxes in Xeoma web interface when using a browser’s ‘white theme’.
    P2P: Fixed an issue with P2P connection to a server machine that uses an unusual certificate.
    Eliminated creation of excessive backup files for Xeoma settings by ‘Problems Detector’.
    Xeoma Pro Your Cloud: Fixed the issue with the MultiArchivePaths parameter (used to distribute user data across several folders or disks), where new information in this parameter wouldn’t apply after the first restart.
    Fixed authorization issues in ‘HTTP Marking’, “HTTP Switcher”, “HTTP Receiver”.
    QR Code Recognition: Fixed issues with false triggering and excessive lines in CSV reports by this module when QR code is nowhere in sight.
    Fixed the issue with interface elements overlaying each other in the ‘Active licenses’ dialog (Main menu -> Information -> Active licenses).
    Fixed the issue with the CTRL button getting ‘stuck’ after being used in the ‘Active licenses’ dialog, which resulted in interface scaling up or down whenever mouse wheel was used even outside of this dialog.
    Fixed the software crash that would happen at attempts to add a Dahua camera.
    Fixed operation of artificial intelligence options in ‘Motion Detector’, ‘Object Recognizer’, ‘Cross-Line Detector’, ‘Visitors Counter’, ‘Parking Spots’ modules. In old operating systems the modules would sometimes stop working after the Xeoma update, and in new UNIX-based systems Xeoma would sometimes display a false warning that a few more libraries were required for these features to function.

[close]

http://felenasoft.com/
Titel: Agent DVR 4.9.4.0
Beitrag von: SiLæncer am 07 August, 2023, 20:00
Whats new:>>

Fix for enabling GPU support on OSX
Faster downloads
Update to M3U8 streams (Nest)
Add MediaWriter DTS / PTS check

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.5.0
Beitrag von: SiLæncer am 10 August, 2023, 11:00
Whats new:>>

Update UI

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.8.10
Beitrag von: SiLæncer am 10 August, 2023, 22:00
Whats new:>>

Fixed operation of artificial intelligence options in the ‘Motion Detector’, ‘Object Recognizer’, ‘Cross-Line Detector’, ‘Visitors Counter’, ‘Parking Spots’ modules. Before the fix, there had been an issue that in old operating systems the modules would sometimes stop working after the Xeoma update, and in new UNIX-based systems Xeoma would sometimes display a false warning that a few more libraries were required for these features to function.

http://felenasoft.com/
Titel: Agent DVR 4.9.6.0
Beitrag von: SiLæncer am 14 August, 2023, 19:00
Whats new:>>

Fix bug with zone settings blocking actions when using simple detector

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.7.0
Beitrag von: SiLæncer am 22 August, 2023, 19:00
Whats new:>>

    Update UI
    Add support for upcoming Google Home integration

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.8.0
Beitrag von: SiLæncer am 13 September, 2023, 19:00
Changelog


    Update UI - optimise mobile mode
    Add email with video option (with pre-event buffer)
    add photo option to actions and schedule
    Add default cloud upload provider
    Add ability to name actions
    Add support for other S3 providers (than just Amazon)
    Restructure the device editing menu and move some controls
    Fix issue with PTZ schedule editor when camera not active
    Copy more object recognition properties in device copier
    Add AI responses to debug logs
    Other bug fixes

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 4.9.9.0
Beitrag von: SiLæncer am 14 September, 2023, 10:00
(https://i.postimg.cc/PxsQmBxM/screenshot-1736.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

Fix issue with time machine

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.0.0
Beitrag von: SiLæncer am 14 September, 2023, 21:00
Whats new:>>

Fix time machine device selection bug

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.1.0
Beitrag von: SiLæncer am 15 September, 2023, 20:30
Whats new:>>

    Fix issue with deleting ONVIF PTZ presets
    Remove default Center preset
    Add notice about using RTMP for Reolink to wizard
    Add notice about stopping scan for testing to wizard

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.2.0
Beitrag von: SiLæncer am 24 September, 2023, 10:00
Whats new:>>

    Add pin control to alerts list
    Fix issue with locking/ unlocking live recording
    Some UI tweaks

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.3.0
Beitrag von: SiLæncer am 09 Oktober, 2023, 11:00
Changelog


Add mark all as read option to alerts
Add summary to storage dropdown
Run storage monitor at startup - delay
agent commands - use server name (mqtt)
ftp upload on event
cloud upload on event
tag current recording api - tagrecording?ot=2&oid=1&tag=something
use grid for point calculation in rectangle
updates for PTZ presets
Grid search for AI tracking
fix bug with autoplay audio
add live scrubbing to time machine - use previous version by unchecking "enable scrubbing" in server settings - local server
ui updates
add digest support to JPEG url
fix issue with fake param in some JPEG endpoints

[close]

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.4.0
Beitrag von: SiLæncer am 10 Oktober, 2023, 12:00
Whats new:>>

    Fix issue with storage management
    Add support for live recording playback/ new recordings in Time Machine

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.5.0
Beitrag von: SiLæncer am 11 Oktober, 2023, 11:00
Whats new:>>

    Resolve issue with AI server up/ down actions
    Fix layout issue at low resolution

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.6.0
Beitrag von: SiLæncer am 16 Oktober, 2023, 11:00
Whats new:>>

    UI updates
    Playback updates
    Log cloud upload failures
    Add scroll momentum for touch devices
    Update raw writer for better audio sync
    Updates to work with new CPAI API changes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.7.0
Beitrag von: SiLæncer am 18 Oktober, 2023, 20:00
Whats new:>>

Fix issue with downloads to IOS devices

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.8.0
Beitrag von: SiLæncer am 28 Oktober, 2023, 20:00
Whats new:>>

    UI updates
    Fix issue with raw recording on some streams
    Add support for setting detector zone on other devices in actions
    Fix issue reconnecting some onvif event streams
    Add integration points for upcoming mobile app updates
    Fix issue with stale images on mjpeg feeds
    Update auth check to not be case sensitive on auth type
    Add option to themes to keep playback controls on screen
    Keep controls on screen if mouse over
    Display playback controls on time machine

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.0.9.0
Beitrag von: SiLæncer am 29 Oktober, 2023, 21:00
Whats new:>>

Fix issue with rendering some action summaries

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.1.0.0
Beitrag von: SiLæncer am 06 November, 2023, 18:00
Whats new:>>

    Updates for compatibility with updates to mobile apps
    Fix issue with ptz actions via URL requests
    UI updates

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.1.1.0
Beitrag von: SiLæncer am 16 November, 2023, 18:30
Whats new:>>

    Fix memory access issue
    Update nuget packages
    Add enhanced support for ios and android apps
    Add speed support for ptz xml descriptions
    Add connecting screen when maximising raw feeds

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.1.2.0
Beitrag von: SiLæncer am 23 November, 2023, 09:01
Whats new:>>

    Update packages
    UI updates
    Add more config warning messages
    URL action Accept header fix

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.1.4.0
Beitrag von: SiLæncer am 07 Dezember, 2023, 12:00
Whats new:>>

5.1.4.0   

Fix issue with assigning actions to tasks
Update userguide links to new userguide

5.1.3.0   

Fix bug with applying advanced settings changes
Add colour for AI overlay to object recognition config
Fix issue with playing back some raw recordings
Update users so they can be migrated successfully
UI updates

https://www.ispyconnect.com/download.aspx#
Titel: Xeoma 23.12.7
Beitrag von: SiLæncer am 07 Dezember, 2023, 22:00
(http://images.six.betanews.com/screenshots/scaled/1335438574-1.jpg)
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    Preview and Archive: New feature: when hovering the cursor over the timeline in Xeoma’s Archive Player, you will now get to see small thumbnails – mini preview pictures of some key frames within those episodes, much like when viewing a video on YouTube. Those mini previews will showcase key frames of the recording episode your mouse is hovering over, thus compressing hours of recordings into seconds to watch through.
    Remote Access: An easy way to connect – with a QR code – has been added for Android-powered devices. Now you can generate a QR code in Xeoma’s ‘Users’ dialog, which will contain all connection data needed to connect to that Server part of Xeoma from a Xeoma Client. Just scan the QR code with the special option in your Xeoma for Android app’s Connection Dialog (Main menu -> Remote access -> Connect to). The QR code will work for both ‘Administrator’ and a ‘User’ of Xeoma, with regular IP-address connection and with P2P connection.
    Support for hardware acceleration on AMD Radeon graphics cards has been added! Also, hardware acceleration used for decoding of camera video streams has been greatly improved in Windows and Linux systems using Intel processors or Nvidia graphics cards.
    Preview and Archive: A noise reduction option ‘Enable noise reduction’ has been added to the settings of the ‘Preview and Archive’ module. The option works with any audio types in Xeoma, and delivers clean sound even when the direct saving to the archive is used.
    Text Recognition: Special optimizations for working with meter readings have been added to the ‘Text Recognition’ module. To take advantage of this feature, check the new ‘Meter’ setting, and the module will switch to a mode optimized for working specifically with meters of various types (water, electric, natural gas ones, etc.).
    Face Recognition: A new option – ‘Use additional detection via MTCNN’ – has been added to the ‘Face Recognition’ module, which allows you to improve the quality of finding faces in the frame. The new option is compatible with both recognition algorithms (statistical analysis and AI). To enable the feature, check it and allow Xeoma to download additional materials for work. Please note that using this feature imposes additional CPU load.
    ANPR (License Plate Recognition): A new country – Iraq – has been added to the Additional package of enhanced ANPR, which adds up to the previously available North American, CIS countries, Jordan and Japan. This is the first time the Advanced ANPR option has support for Arabic symbols, too!
    Streaming to Youtube: The ‘Streaming to Youtube’ module now offers streaming to an alternative platform called RuTube. All you need is an rtmp link and the broadcast key from RuTube, and off your broadcast goes! See detailed guide here
    New feature: Notifications. A new item called ‘Notifications’ has been added to Main Menu -> Remote Access. Inside, you can configure the receipt of notifications on your mobile device when the connection to a Xeoma server or an external device is lost. Unlike Xeoma’s other module for system health monitoring – ‘Problem Detector’ that is also capable of detecting the occurrence of problems – ‘Notifications’ has the unique ability to send an alarm message when a Xeoma server stops working, for example, due to a power outage! Also, ‘Notifications’ will work even without connecting the ‘Mobile Notifications’ module to the chain. The only thing required is to give the Xeoma application on your mobile device permissions to show notifications the first time you connect to the Xeoma Server with the ‘Notifications’ feature.
    Device List: Search has been added to the ‘Groups’ dialog. Simply enter a camera’s IP address or name into the search box to find it in a matter of seconds. Besides, now there is a CTRL+G (CMD+G for Mac) hotkey to open the Groups pop up in any window, including Xeoma’s embedded Archive Player.
    New feature: autofocus. The new version of Xeoma offers the option to automatically check for loss of focus on cameras with ONVIF-facilitated support for PTZ, and attempt to return it. Find ‘Autofocus Settings’ in the ‘Universal Camera’ module settings and select one of the two options: ‘Autofocus based on image analysis’ which makes the program constantly check the camera scene for signs of defocusing, or ‘Autofocus at regular time interval’ to just make the camera focus back regularly at given intervals.
    QR Code Recognition: The pass list option has been added to the ‘QR Code Recognition’ module. With the new option, the module allows to create a ‘white list’ of codes to react to (or the other way around – make the system only react to codes not from the list). All you need to do is just enter the text behind the QR code into the ‘Whitelist the code below’ field and select the desired mode in the ‘Module reaction type’ drop-down menu.
    Search for DVRs that do not support ONVIF has been improved. Upon detection of such DVRs, the new version of Xeoma is able to add all its cameras, not just one as before.
    Problems Detector: The log file of the ‘Problems Detector’ module has been enhanced. Now, when the ‘Processor load’ is engaged, the log file will not just have an entry about the processor load being higher than the threshold you set, but also state the current CPU load in %.
    Xeoma Pro Trial edition: The ‘Search by motion’ (the search for motion within an area) has been added to the Trial version of the Xeoma Pro edition.
    webRTC: The advances of Xeoma’s webRTC are now available to ARM-based servers (with the ARMv7 or ARMv8 architecture). Since webRTC is the ultra contemporary way of streaming that allows to shift part of the camera processing load onto the web browser’s side, it is compact and less powerful machines such as ARM-powered micro computers that could benefit from it the most.
    Face Detector (Emotions): The new option to set up the range of face recognition has been added to the emotion recognition module. Set the maximum distance where the face is expected to appear with a ‘Range of face recognition’ slider to increase the accuracy with which the module detects faces and recognizes emotions. Please note that greater distances will yield higher processor load.
    The messages that Xeoma displays when the ‘Show camera information’ option is enabled in ‘Layouts’ -> ‘Visualization settings’ have been enhanced. Now, the information updates more frequently and includes incoming and outgoing network speed of Xeoma’s Server and Client part. Besides, the camera information will stay even if you switch to the Quick Settings (Single Camera view) Window or the Detailed Settings Window.
    A new launch parameter – -nosearchservers – has been added for the launch of Xeoma Client parts. This command will make Xeoma opt out of searching for any Xeoma servers in the network to connect to. The automatic search for Xeoma servers lists all found Xeoma Servers in the Connection Dialog, making selection of a server to connect easier for a security operator. But if required, it can now be refrained from with the new command.
    PTZ Presets, Tours: More time options have been added to the ‘Stay time’ option of the preset and tour setup dialog, so that now the pause before moving on to another preset can last up to 24 hours. See more about the setup of this Xeoma Pro feature
    Xeoma Pro Trial edition: The ‘Play ONVIF archive’ feature that has been previously added for viewing of the recordings from ONVIF-compliant cameras or DVRs directly in the Xeoma’s Archive Player, is now available for tests even in the Trial version of Xeoma Pro. See more about this feature
    HTTP Request Sender: More lines for parameters are now available in the ‘HTTP Request Sender’ module, which means that you can use as many parameters for the http command as you’d need now.
    Smoke Detector: A new advanced algorithm – ‘Smoke and fire detection with CUDA’ – has been added, which significantly increases the accuracy of smoke and fire detection. To begin using the new advanced recognition method, select the CUDA option from the dropdown ‘Working mode’ option and wait until the additional resources required for work are downloaded. Please note that a CUDA-supporting Nvidia graphics card is required.
    Text Recognition: New enhanced artificial intelligence algorithms have been added to the ‘Text Recognition’ module, which has resulted in significantly better text detection and reading.
    Face Recognition: A new recognition method – ‘Artificial intelligence using CNN (ConvNet)’ – has been added to the module’s ‘Face detection algorithm’ options. The new method is optimized to work with Asian face types resulting in higher accuracy of their recognition. This work method is available in Xeoma Pro and has basically the same conditions as the ‘Statistical analysis’ option, and does not summarize with other Face Recognition’s work methods (statistical analysis or artificial intelligence).
    The previously introduced ‘Freight Unloading Counter’ filter module that detects freight vehicles in the camera field of view and counts the ones that got unloaded, has been enhanced, which results in higher accuracy of recognition and counting.
    Cross-Line Detector: The ‘Cross-Line Detector’ module now allows to use separate reactions with each drawn line. It means that you can add all the needed reactions to the chain after ‘Cross-Line Detector’, then draw all required lines in the monitoring zone, and choose a reaction for each of them with the new ‘Selected line’ and ‘Destination filter’ elements underneath the zone.
    JSON API: Support for special characters (@ and %) in an Administrator’s password has been added for API commands.
    webRTC: Motion visualization has been added for viewing of webRTC streams through the web interface. Now, if you have webRTC enabled in your ‘Web Server’ module and use a ‘Motion Detector’, you can see green frames around moving objects in Xeoma’s web interface like you do when viewing cameras through a Xeoma Client.
    QR Code Recognition: Fixed the visualization of a recognized QR code. Now the frame around a detected QR code matches its size.
    Fixed gray distortions that would appear while shifting between the Single or Multi-Camera View and the Archive Player. See other reasons for gray distortions
    PTZ: Fixed an issue when PTZ control of cameras would not work in Xeoma if one of the cameras was going through a PTZ guard tour.
    Xeoma Pro Your Cloud: Fixed failing to record archives if an FTP Receiver was used as a video source for a video stream with sound.
    RTSP Broadcasting: Fixed an issue when ‘RTSP Broadcasting’ could fail to start working the first time it was added.
    Mobile Notifications: Enhanced landing into the archive after clicking on a mobile notification. Now the archive will open on an even more precise position, which will help you get straight to watching the needed episode.
    Fixed an issue where Xeoma that has been installed to autostart on Mac OSX systems would not ask for required permissions when recording to an external drive was selected.
    Fixed an issue with empty USB cameras being added to Xeoma during a search on Raspberry Pi 2 or Raspberry Pi 3 micro computers.
    HTTP Request Sender: Fixed incorrect length calculation in the Content-Length header of HTTP requests.
    Web interface: Fixed glitches of the archive player in Xeoma’s web interface that would appear when playing back webRTC archives of recordings with varying resolutions.
    Enhanced Xeoma’s feature to search for Xeoma servers from Xeoma Clients. Now it works for Xeoma servers that are located in different subnetworks than the Client.
    Fixed sound delay in Xeoma running on macOS machines with an M1 processor.
    Improved smoothness of m3u8 video streams in Xeoma.
    Fixed an issue in Detailed settings when modules would occasionally end up visually shuffled in a chain.
    Motion detector: Fixed the issue with ‘Motion Detector’ stopping working if switched from the ‘Detect only absence of motion during’ mode of work to the regular motion detection mode.
    Ubuntu: Fixed occasional crashes from using the ‘Screen Capture’ module on Ubuntu 22.04.
    Export: Windows OS: Fixed export fails if the folder path has a dot (‘.’) in the name.

[close]

http://felenasoft.com/
Titel: ContaCam 9.9.23
Beitrag von: SiLæncer am 11 Dezember, 2023, 21:00
(https://i.postimg.cc/wvgQT1PG/screenshot-2678.png)
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- Disallow connecting multiple times to the same Camera
- Restart audio input device in case no audio data reaches us for 30s
- New settings menu entry to change IP/Host of a network camera
- Web interface works now well when embedded inside an iframe
- Added support for Lorex
- Updated internal web server to Apache 2.4.57 and PHP 8.2.10
  (Apache and PHP both with OpenSSL 3.1.2)
- Hardened Apache security by disabling the HTTP TRACE method
- Updated mailer program to mailsend-go v1.0.10

[close]

http://www.contaware.com/
Titel: Agent DVR 5.1.5.0
Beitrag von: SiLæncer am 14 Dezember, 2023, 10:00
(https://i.postimg.cc/9Mbt4WHF/screenshot-2679.png)
Connect to an unlimited number of Nest cameras remotely and with no port forwarding, but with end to end SSL security via this tool.

Freeware

Whats new:>>

fix dshow issue with devices with null name
install specific version of ffmpeg for OSX
try onvif events even if it says not supported
update ptz joystick controller

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.1.6.0
Beitrag von: SiLæncer am 15 Dezember, 2023, 19:00
Whats new:>>

Fix issue with color of AI overlays
Add overlays to alert images (when available)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.2.6.0
Beitrag von: SiLæncer am 16 Februar, 2024, 12:00
Whats new:>>

    UI updates
    Fix bug with audio permissions
    Fixed issue with case sensitivity for downloads on linux
    Added onvif discovery switch to settings
    Fixed issue with reconnecting record streams

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.2.7.0
Beitrag von: SiLæncer am 18 Februar, 2024, 10:00
Whats new:>>

Update puppeteerSharp to resolve issue with web browser source type

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.2.8.0
Beitrag von: SiLæncer am 19 Februar, 2024, 19:00
Whats new:>>

    Fix issue uploading to SFTP on linux
    Remove some locks
    Update onvif talk

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.2.9.0
Beitrag von: SiLæncer am 27 Februar, 2024, 10:00
Whats new:>>

    Add support for channel parameter in reolink detector configuration
    Maximising streams now use low res until high res is connected
    Added motion search to filter options - https://www.ispyconnect.com/docs/agent/timeline#motion-search
    (will only work when using tracking object detectors or AI and with new recordings)
    Fix bug with account reset scripts
    Ensure tags are passed to start recording actions
    Translate connection based messages for logging

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.0.0
Beitrag von: SiLæncer am 29 Februar, 2024, 15:00
Whats new:>>

    Fix for bug with editing audio devices
    Updates to database
    Increase max buffer length to 60 seconds

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.1.0
Beitrag von: SiLæncer am 04 März, 2024, 11:00
Whats new:>>

    Add H265, VP8 and VP9 encoders to recording settings
    Rewrite GPU encoder code
    Add audio overlay in motion graphs
    Fix bug with recordingupdated event handler
    Optimise motion and audio graph data
    Add reolink motion channel support

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.2.0
Beitrag von: SiLæncer am 05 März, 2024, 10:00
Whats new:>>

Fix bug with skip to motion feature (playback error)

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.3.0
Beitrag von: SiLæncer am 21 März, 2024, 11:00
Whats new:>>

    Add Session Management to server menu (view current login sessions and terminate sessions).
    Add LDAP integration for logins via LDAP server
    GPU updates - fix issue with QSV Encoder. Add device and GPU recorder options to recording tab.
    Library upgrades
    UI bug fixes

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.4.0
Beitrag von: SiLæncer am 22 März, 2024, 20:00
Whats new:>>

    Update ffmpeg installer
    Add area name and detected zones to recording tags

https://www.ispyconnect.com/download.aspx#
Titel: Agent DVR 5.3.5.0
Beitrag von: SiLæncer am 29 März, 2024, 10:00
Whats new:>>

    Fix issue with SFTP
    Add support for QSV Decoders
    Add option to UI menu to disable recording info
    Fix issue with VR controls
    Fix issue with adding camera to grid when using wizard
    Add set process priority to settings
    Send RTSP-BYE on stream close

https://www.ispyconnect.com/download.aspx#