Autor Thema: DVB Dream ........  (Gelesen 36080 mal)

0 Mitglieder und 3 Gäste betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Re: DVB Dream ........
« Antwort #150 am: 02 November, 2011, 23:49 »
Ja ...der Preis ist in der Tat etwas heftig ...insbesondere wenn man bedenkt das es in DVBDream seit langem diverse Baustellen gibt ...bei denen nicht wirklich was passiert ist ...

Von daher kann ich an dieser Stelle nur mal wieder sagen ... schau(t) dir (euch) mal Smartdvb an ...die beste freie DVB-Soft seit Altdvb ...und das will schon was heißen ;)

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: DVB Dream ........
« Antwort #151 am: 03 November, 2011, 00:00 »
stimmt, SmartDVB macht einen prima Eindruck, zumal JJ weiter dran ist. Ich bin gerade mit der neuem Winclip Version beschäftigt. Biloute ist auch sehr an Input interessiert. Das sind aber die Einzigen, die noch entwickeln, soweit ich weiß.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
Re: DVB Dream ........
« Antwort #152 am: 03 November, 2011, 00:02 »
Zitat
SmartDVB macht einen prima Eindruck, zumal JJ weiter dran ist.

jau ...die aktuelle Beta 5 macht sich soweit auch sehr gut (von Kleinigkeiten abgesehen ;) )

Zitat
Biloute ist auch sehr an Input interessiert.

Wäre kein Thema wenn ich ne Testversion zur Verfügung hätte (Hab leider nicht so den Draht zu Biloute) ;)

Zitat
Das sind aber die Einzigen, die noch entwickeln, soweit ich weiß.

ja...leider  :'(

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline dvb_ss2

  • Premium-Cubie
  • ****
  • Beiträge: 674
Re: DVB Dream ........
« Antwort #153 am: 03 November, 2011, 13:15 »
...oder auf Linux umsteigen. ;)

dvb_ss2
Hardware: Gigabyte GA-MA78G-DS2H, AMD Athlon 64 X2 5400+ 2x2,8GHz, 4x2GB DDR2-800MHz, Palit/XpertVision GeForce GT 220 Super+ 1024MB DDR3, 1x60GB SSD, 1x500GB, 1x1,5TB HDD, 1x2TB HDD, Technotrend TT-budget S2-3200, OS: Ubuntu Lucid Lynx 10.04, TV-Software: VDR 1.7.15 + Xineliboutput

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 1.6 erschienen
« Antwort #154 am: 06 November, 2011, 11:05 »
v1.6 (05.11.2011) What's New

    Fixed many bugs
    Better support for Japanese EPG and channel names
    Now scheduler is able to suspend or hibernate the PC after the record
    Diseqc on AverMedia cards now should work
    Geniatech cards should work better
    Fixed a crash bug which happens after scan
    * Cracked versions will not work stable! We recommend you buying it while the price is still the same and cheap. There will be a price change soon.
    * Please report on the DVB Dream forum if you run into any problem with Geniatech or Avermedia, we can probably fix that. We just need testers.
    * If DVB Dream doesn't display the codecs installed on your system, please manually add them into codecs.ini, you can also let us know on DD forum, so that we will add them into next setup files.
    * AVer3D Satellite TV, AVerTV Satellite PCI, AVerTV Galaxy should work well now on DD
    * For better performance on HD, make sure you use "Enhanced Video Renderer" in Video Options (Only if your graphic card has the necessary hardware acceleration) For SD channels, WMR9 is still recommended.
    * SECOSD won't work on DD now, it needs an update from its author
    * If DD interface is not completely in your own language or partially in English, you can translate the non-translated parts of the language INI files (in DD \languages) folder and post on DD forum for us to include in next versions.

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 1.7 erschienen
« Antwort #155 am: 17 November, 2011, 18:21 »
v1.7 (17.11.2011) What's New

    Unicable support added (works only on TBS cards for now)
    CI/CAM support for AverMedia (not tested, please confirm)
    Support for NetUP devices (Diseqc & CI, not tested)
    BDA device error code:14 bug fixed which happens on some devices
    Initial installation dialog supports more languages now (Turkish,Greek,Chinese,Arabic,Ukranian,Farsi...)
    A few bugs in scheduler fixed
    Arabic epg bug fix
    Snapshot crash bug fixed
    LNB Power Off/On support added (in File menu, works only on TBS and Compro devices for now)
    EPG support option added for Israel cable provider HOT.
    * If you encounter any problem with EPG text charset, you should pick the correct EPG code page instead of "auto"
    * BDA Device options now provides different methods for diseqc (Main Menu->Options->Device Options)
    * For unicable, you should select the LNB type as unicable while adding satellites in diseqc dialog
    * Unicable and LNB Power Off/On is not supported on all devices. It should work fine on TBS cards with new drivers (these new drivers should be released by TBS in next few days)
    * If you are still having problem with diseqc on AverMedia devices, please report. You just need to download latest aver media drivers.
    * Kaspersky Antivirus is not recommended since it could be the culprit responsible for des.dll errors due to some false virus alarms / heuristic scan.

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 1.7a erschienen
« Antwort #156 am: 23 November, 2011, 14:06 »
v1.7a (23.11.2011)

What's New

    Critical bug fix which causes registered users to see "cracked version" message
    Some bug fixes

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.0 erschienen
« Antwort #157 am: 06 August, 2012, 18:15 »
Zitat
      



v2.0 (06.08.2012) What's New
***
This version has a few underlying changes. So it is more like a test version. If you have installed DVB Dream before, we recommend you to do a clean install to a different path and not an upgrade over the previous version. That way you can keep your old version working as well to revert back in case of any problem with this new version.
***

    DVBS-2 and Diseqc should work better on most of DVB cards/boxes now
    Now vendor specific functions are supported in separate BDA extension files under devices\bda_extensions folder, it is possible to force extensions by editing conf.ini
    DVB-C and DVB-T/ISDB-T improvements (different bandwidth and different QAM frequency lists are now possible)
    All terrestrial/cable frequencies are now grouped in country/city sets
    Now Pilot & Roll Off values can be specified on scan interfaces
    SkyStar HD2 should be able to lock on DVB-S2 transponders now
    DD automatically recognizes the codecs installed on your system and updates codecs.ini during setup, and there is also a new button "Add installed codecs" on video options dialog, to add newly installed codecs into codecs.ini with just one click
    Some network search and LCN related bugs fixed
    Diseqc repeats are now handled by device interfaces
    Positioner as defalt doesn't try to retune because of the crashes on some card drivers
    *If your SkyStar HD2 remote doesn't work, please try "Twinhan" remote type, and report on the DD forum
    *DVB-C and DVB-T/ISDB-T frequencies are now stored in "cable.ini" and "terrestrial.ini" files
    *For terrestrial and cable users, a clean install & scan is recommended
    *If you still have problem with diseqc, please report on the forum and try changing "main menu->options->device options->diseqc method" and increase the values in "main menu->options->performance->delay after diseqc" and "diseqc repeats"
    *If you have crashes during scan when you use BDA device interface, disable TIF under device options
    *If you are a programmer, believe that you can write device extensions to support your DVB cards/boxes please contact us, we will provide the API, it is quite simple. Possible to support CI / Diseqc / DVB-S2 / Blind Scan / LNB power off through device extensions
    *Report problems on DD forum please

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.0a erschienen
« Antwort #158 am: 09 August, 2012, 18:45 »
v2.0a (08.08.2012)

Whats new: >>

minor fixes for DVB-T/C users.

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.1 erschienen
« Antwort #159 am: 19 August, 2012, 00:21 »
v2.1 (18.08.2012) What's New

    Built-in BISS / Fixed CW decoding (under "Tools" menu)
    New versions of TSWriter2, CHLTools, RecentRecordings, AutoCHLBackup modules
    Tool tips, possible to turn off ("Disable tool tips" in Preferences/General)
    Bug fixes

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.1a erschienen
« Antwort #160 am: 27 August, 2012, 22:30 »
v2.1a (27.08.2012) What's New

    Hauppauge Nova HD s2 problem on 8psk channels fixed
    settings.cfg is automatically restored from backup if gets corrupted
    Some scan bug fixed (which caused nameless channels especially on 13e)
    TT-connect S2-4600, TeVii S660, S630 should work better now
    * Now you can tell DD how long it should wait until signal lock (Preferences->Performance->Tuner Timeout), this can speed up channel scan by removing unnecessary delay on no-signal transponders.
    * Cracked versions will NOT work well and they will experience a lot of problems (!) . We recommend you to use licenced versions, for stable work and frequent updates for years to come.

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.2 erschienen
« Antwort #161 am: 19 September, 2012, 21:00 »
v2.2 (19.09.2012)

What's New:>>

    Registration problem fixed, caused problem for some registered users !
    DVB Dream now handles system wake up from sleep or hibernation.
    Windows 8 EVR crash fixed , which used to happen when switched back from the full screen mode
    Log files are now all in one place (\Logs)
    "Reset Device" menu option fixed, it was not working when more than one device of the same brand are installed
    EPG is now cached (disabled by default, grid-based epgplus module will use this feature, soon to be released)
    Now "Direct Connection" is enabled by default, in video options. Please remove the checkmark if you get any graph errors.
    * On terrestrial and cable devices, LCN (logical channel numbers) & Network Scan is enabled by default

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.2a erschienen
« Antwort #162 am: 25 September, 2012, 12:14 »
v2.2a (24.09.2012) What's New

    New grid based EPG module "EPGPlus", with coloring based on content type. (Try it and share your ideas/suggestions please. Main menu->Modules->epgplus. You need to activate EPG cache under settings / performance. Content coloring is ependent on your provider, not all providers send content info in EPG correctly)
    EPG should display characters correctly now (tested on 42e, 28e, 19e, 13e, 7w and DVB-T UK)
    Option to remember last selected quick favorites
    Bug fixes
    * If EPG still doesn't display characters correctly, please report on the forum by specifying region/satellite , frequency. We'll fix it.
    * LibertyReserve and Moneybookers payment options have been added.

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.2b erschienen
« Antwort #163 am: 11 Oktober, 2012, 13:00 »
v2.2b (10.10.2012) What's New

    EPG Plus improvements (Tv window, channel logos, right click translate/search in IMDB/Google menu options, remote control support and possible to move between events by keyboard arrow keys.).
    Timeshift should work a lot better now
    New EPGNumbers module (by X05) will automatically assign channel numbers in the same order as provider's STB / EPG, for most of the European providers. You just need to select which provider you use in module options.
    Audio Left/Right channel selection (panning) on channel properties now works (to be used when audio channels have different languages or comments/narrative)
    New option "Display only selected satellite in remote tab" in prefences/ch.list
    "Assign SIDs to ChNo" Tools menu and scan dialog option. (Useful for North American users, you could just use the remote tab in STB order)
    New record file naming options. ($5=ChNo $6=SID $7=SatPos) Possible to include channel numbers in recordings now (It is so as default, if you assign channel numbers in remote tab)
    DVB Dream will scan faster when network search is NOT enabled.
    Bug fixes
    * EPGPlus is now default and EPG cache is enabled by default. So you can disable if you don't use EPG at all. Legacy EPG can be found in Tools/Misc menu as well.
    * TBSCI module is now disabled by default, you need to enable it if you use CAM on TBS devices
    * You can get a free DVB Dream licence !, if you can help us preparing a package of logo files for EPGPlus module (complete logo files for a satellite), check the related post in DD forum for details.
    * You can also get a free DD licence if you can add device support for the (yet) unsupported cards (We will provide sample source code if you can write a simple BDA extension to support diseqc & remote control etc on BDA drivers)
    * You can download EPG+ Channel logos for United Kingdom here:
    28.2 East and DVB-T UK (Extract files to dvbdream\modules folder)

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189183
  • Ohne Input kein Output
    • DVB-Cube
DVB Dream 2.4 erschienen
« Antwort #164 am: 17 Juni, 2013, 06:00 »
v2.4 (16.06.2013)

What's New:>>

    Support for new modulation technologies, MIS with VCM/ACM , PLP and PLS (works only on TBS devices for now)
    E-AC3 support (This fixes no audio problem for some channels, tested with DVB-T France streams)
    An important HD record problem fixed
    New preferences option "Prevent Monitor Power Off (Override Windows power options)"
    Added experimental support for MadVR (a 3rd party video renderer claiming higher video quality) (MadVR info/download)
    Now possible to stream all channels / whole TS of a tranponder onto local network
    Streaming was not working on some channels (when PCR is different than Video) fixed!
    One-channel streaming provides all audio pids now
    Attempting to run the DD again now brings it to front instead of displaying a warning
    Option to collect EPG for other satellites too. (in Options->Preferences->EPG (TV Guide) Only recommended for North American users
    Fixed the problem with EPG Cache optimization setting "Within X hours", now default EPG filter option will cache/display EPG events that are "within 5 hours", You can change this behaviour in Options->Preferences->EPG (TV Guide).
    Option to start VLC from current record in renderless (in Tools menu, waits for 15 secs to have enough data. This option is meant to be used an alternative to timeshift, make sure you increased max file size in record options)
    * Channel list file format changed. DD takes a backup of old CHL and upgrades it to new format itself. New format won't be backward compatible
    * E-AC3 has been tested using LAV and MPC audio decoder. (MPC Standalone Filters,   LAV Filters)
    * You can stream all channels from the same frequency. Just set UDP TS Client IP address to the client PC's address, then check "Active" and "Send all channels". DD might need a restart after this. Now you can start VLC on client PC and VLC's Main menu->Media->Open Network Stream, type this as URL "udp://@:1234", click on "Play". You can switch between channels using Main Menu->Playback->Program. DD will stream channels as decoded as a whole TS. Make sure you disable streaming when you don't use, otherwise it can cause problems while watching TV.
    * SIMOSD module has been removed, since it directly accesses to channel list file, it needs update from its author.
    * Use EPG cache optimization if you have video problems because of EPG cache / high EPG data rate (especially in North America)

www.dvbdream.org

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )