Autor Thema: SmartDVB 0.5.0.51 RC3  (Gelesen 5106 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
SmartDVB 0.5.0.51 RC3
« am: 17 Oktober, 2016, 02:16 »
Hi my german friends.  There's a new 050rc version available on the site,  sorry for the longer delay this time but had a bad personal summer i needed to recover from

This version does not add many features but has internal changes to improve video stability also on longer runs and overall app respnsiveness should be better due to changed signal handling plus many fixes also from older parts of the app,  did some refractoring of some parts which took lots of time to test

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.5.0rc
« Antwort #1 am: 17 Oktober, 2016, 04:52 »
Hi jackjavo , good to see you back  :) ... and thanks for the new smartdvb version  :jo

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.5.0rc
« Antwort #2 am: 17 Oktober, 2016, 10:24 »
thanks silencer good to see you're also still going with dvbcube. Did you have a change to look at the current version, should be  more stable and recognise more devices (also on w10)

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.5.0rc
« Antwort #3 am: 17 Oktober, 2016, 12:31 »
Yes , i think i can do this in the next few days .

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.5.0rc
« Antwort #4 am: 17 Oktober, 2016, 16:22 »
First look : I had to start smartdvb ´as administrator´ in order to start my devices. Scanning channels was fast and good (Florian Device) .Then i played around with codec and renderer setings ... thats all ... running fine with no further problems atm ...

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.5.0rc
« Antwort #5 am: 18 Oktober, 2016, 00:23 »
Hello Jack
good to read from you after a while. Just came back from a long stay in France, Will test your new version during the coming days. I had to start SDVB as admin since your later versions already, but that is of course no problem. Will report my experience.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.5.0rc
« Antwort #6 am: 18 Oktober, 2016, 17:35 »
hi thanks! :) are you both talking about needing to install as admin whilst having installed the application data in the local app data folder, on win10? If using the secondary install option to install in ' program files' (but can be any other directory for that  matter) admin is always necessary.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.5.0rc
« Antwort #7 am: 18 Oktober, 2016, 17:46 »
i used the secondary install option (data in normal programm folder -> ' program files )

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Re: SmartDVB 0.5.0rc
« Antwort #8 am: 21 Oktober, 2016, 18:48 »
Hi again ... after some days with the new version i can say that it runs absolut stable on Windows 10  :jo

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.5.0rc
« Antwort #9 am: 21 Oktober, 2016, 19:20 »
Darn! Did not see that thread until now ... downloading  ;D
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.5.0rc
« Antwort #10 am: 22 Oktober, 2016, 00:40 »
Hi, I was busy for a couple of days.
I also installed using the second option and admin was required to run SDVB in W10. No complaints from my side for now. Runs smoothly.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
SmartDVB 0.5.0.36 RC 2
« Antwort #11 am: 13 Februar, 2017, 23:42 »
Hi

There's a new install rc2 which might fix that admin issue.
Been reading about new dvb-t2 developments in germany,  does this include plp (multistream)  selection and is this already testable there with normal bda t2 sticks?

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.5.0.36 RC 2
« Antwort #12 am: 14 Februar, 2017, 01:06 »
Hi Jack,

I did not find a suitable DVB-T2 HD stick yet, without having to spend a real fortune...

STBs can be found everywhere, for slightly above 40€ without decrypting, or around 70€ with decoder.
For sure I would not be willing (nor able) to pay more than that, for a stupid USB stick (or PCI-e) device! 

And of course I would not go for a tuner, that is not specified for the German market.
For example, I do have a small Tokai LCD TV from around 2012, that came with a DVB-T2 tuner ready for the French market, but this one does not even find the one now active transponder over here.

My new XORO HRT 7620 STB is working fine, but it won't provide me with full technical data on the transmissions.
Nothing to be found but frequency and tuning raster, plus byte rate during recording.

So, sorry I can't run any tests with German DVB-T2 HD on the computer for now.

Jürgen
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.5.0.36 RC 2
« Antwort #13 am: 14 Februar, 2017, 08:52 »
Hi Jurgen,

Good to hear from you again btw.  I gathered as much from what i read here (need to brush up on my german reading skills for sure) ,  no dvb-t2 here in my country so no other option than to try to test such things remotely. I kind of envy you there getting to play with these new techs.  For sure there might appear some cheaper dvb-t2  devices for the German market in the future. Been having lots of requests for this lately  hence my queries. There are some t2 satellite muxes though (t2-mi) i can get, seems some providers distribute entire MPLP streams  through multistream sat frequencies,  but not real useful for dvb-t2 testing in any case.

Hopefully just a matter of some time until such cheaper usb stick options become available. Lets hope they use standard defined interfaces for their bda drivers :(

Btw the current version looks quite good stability wise also for the various test HEVC streams that can be received on sat now.

Best regards
Jack
« Letzte Änderung: 14 Februar, 2017, 09:48 von jackjavo »

Offline Joutungwu

  • Mega-Cubie
  • ****
  • Beiträge: 178
Re: SmartDVB 0.5.0.51 RC3
« Antwort #14 am: 13 April, 2017, 22:17 »
Hi Jack,

i just installed SmartDVB 0.5.0.51 RC3. My first impression: It runs much better than 0.4 on Windows 10 overall. Very awesome, especially for Ultra HD channels.

Installation was also great. All settings from 0.4 were adopted automatically without any problems.

Thank you very much! Great work!  :jo ;Beifall ;Beifall ;Beifall  :jo

Joutungwu
PC: Intel® Core™ i5-6500, ASRock H170 Pro4S, 16 GB DDR4-RAM, Samsung 850 EVO SATA III 2,5 Zoll 250 GB SSD, KFA2 GEFORCE GTX 960 GAMER OC 4GB, DVBSky S950, Windows 10 Prof. x64
Gäste-PC: Intel® Core™2 Duo Processor E8400, Asus P5K Deluxe/WiFi-AP, 4 GB DDR2-RAM, 250 GB HDD, Sparkle GeForce® GT 430, Hauppauge Nova-S PCI mit TT-Budget BDA-Treiber 5.0.3.6, Windows 10 Prof. x64
Sat.-Technik: Technisat GigaSystem 17/8 G, 4x Quattro-LNBs: 19.2° E, 13.0° E, 28.2° E, 7.0° E
DVB-Software: Mediaportal, SmartDVB