Autor Thema: SmartDVB 0.3.0 RC  (Gelesen 29671 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
SmartDVB 0.3.0 RC
« am: 27 November, 2012, 20:56 »
Hi,
Some tstrs been busy with latests builds i got here. Wud like some extr* tsters  bef*re public with beta etc (coz at previous times some beta's were too bug infested imho). Just let me know i have l*ink rdy...

Offline yvmifi

  • VIP-Cubie
  • *****
  • Beiträge: 134
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #1 am: 27 November, 2012, 22:07 »
@ jackjavo I do of course again !!! I have TechniSat SkyStar HD2 intern and PCTV DVB-S2 Stick (460e)>>> Windows XP LAV-Filter 0.54 Astra and HotBird >>>ASAT Mutiswitch AGS 9/8
TechniSat SkyStar HD2 is top
PCTV DVB-S2 not work in SmartDVB 0.25. I found not DiSEqC for this Card.

yvmifi
Octagon SF3038 ;Formuler F1;XSPEED LX3;GIGABlu X1 >>alles mit openHDF 6.0 Beta
IntelCore PC E8400 3GHz:Gigabyte GA-P35-DS3;Windows7
Astra (19.2E)/Hotbird (13E) ASAT-9/8 Speedport SMART DSL50000

Online ritschibie

  • Aufpass-Cubie
  • *****
  • Beiträge: 10502
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #2 am: 27 November, 2012, 23:34 »
Oh, jackjavo, getting busy again that makes me happy. Always ready to test something out of your hand/brain. If you have special points of interest what should be tested more thouroughly, let me know.

Ritschie
Intel Core i7-4770K - ASRock Z87 Extreme6/ac - Crucial Ballistix Sport DIMM Kit 16GB, DDR3-1600 - Gigabyte Radeon R9 290 WindForce 3X OC
TBS DVB-S2 Dual Tuner TV Card Dual CI  - DVBViewer pro 5.3 und Smartdvb 4.x.x beta - 80 cm Schüssel, 2xQuad-LNB - Astra (19.2E)/Hotbird (13E)
I-net mit Motzfuchs ; WLAN: Fritz 7390; BS: Windows 10

Offline dada

  • Aufpass-Cubie
  • *****
  • Beiträge: 353
  • Ein leerer Kopf nickt leichter
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #3 am: 27 November, 2012, 23:44 »
Hi jackjavo,
I am ready to do tests too, just tell me what you want to have tested.
System:
MB ASUS ROG Maximus Ranger VIII, iGPU Intel 530, 2x8GB RAM HyperX Fury, CPU Intel Core i7-6700K, M2SSD Samsung 950 Pro 512 GB, HD Samsung 2TB, Tevii S660 USB an Rotor, Schaltung über Uncommited Schalter. DVBViewer, SmartDVB, Windows 10 Pro 64 bit.
[close]

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #4 am: 28 November, 2012, 00:32 »
I suppose, we will also need a feedback thread for it, mainly to avoid multiple reports on the same possible issue.

Or would you (still) prefer PM reports?
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #5 am: 28 November, 2012, 12:51 »
I'm also willing to test. Hardware is Hauppauge Budget 1600, but no Diseqc or anything else ....
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #6 am: 28 November, 2012, 15:55 »
@jurgen: i figured this wud be the 'feedback' thread? But if it's better to creatte other one that's ok with me.

bout tsts:
- there's multiple tr*nsponder records there now, but i have not been able to test records of multipe crypted ch*nnels, also have reports that it don't function that well. If it works at all i'd also like to knwo about cpu usage with multi records.
- there's a new SmartOSD (so i call it), something at which i've been for quite a long time (like a side project). I'd like to know if it's ok for remote or ny other issues with it.
- there's no new module support compared with 0.2.5 (beside ms diseqc interfaces) coz my focus lied elsewhere with this version, but winter still is long so i'm sure that'll be looked at too.
- much alterations so too much to mention here, see history.txt. Mainly stability needs to be looked at.
- There's a new custom ch*nnel list, i still have occasional probs with it when re-loadint it a lot etc etc, so that needs to be looked at too before adding more stuff to that new channel list.

best regards nd tx all for this round once again :) Nd i'll promise i'll refrain from personal comments (AS long AS the bASterds here refrain from bothering me too much nymore, it's not like they have stopped at all ofcourse but well.).. :)
ps: i've sent pm to all of u, sometimes this msg board acts up so let me know if u didnt' receive it..
edit: oh nd another major issue i forgot, lotsa alterations to the installer (nd besides that i had system cr*sh nd needed to rebuild it so needs thorough tsts too). It now by default tries to install alterable files at local user data folder (eg: c:\users\dutch bastard\AppData\Local\SmartDVB). It also allows to still install at 'intall folder' (usual 'program files'), but in such case still admin rights wud be needed at w7/8 (when using data folder not!)
« Letzte Änderung: 28 November, 2012, 17:16 von jackjavo »

Offline crazy

  • Einmalposter
  • *
  • Beiträge: 1
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #7 am: 28 November, 2012, 17:04 »
I'm waiting for the file link to test :)

Offline Snoop

  • Premium-Cubie
  • ****
  • Beiträge: 795
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #8 am: 28 November, 2012, 17:36 »
First test: No problems here ...
Intel Core i5, 16 GB Hauptspeicher, Windows 10 Professional 64 bit, Cinergy S2 Box,Smart DVB 0.4

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #9 am: 28 November, 2012, 18:23 »
ok gud, at least install etc 's still ok.

About custom list, u'r also able to put logos at 'logos' folder (local user data, otherwise like mentioned 'program files' folder).
Here's some tst logo's i collected here nd there (not complete but gud enuff to tst):
https://dl.dropbox.com/u/51980102/logos.rar

rgrds,
jj

Offline yvmifi

  • VIP-Cubie
  • *****
  • Beiträge: 134
  • Ich liebe dieses Forum!
Re: SmartDVB 0.3.0 pre beta tsts
« Antwort #10 am: 29 November, 2012, 00:37 »
First test:Transponderscan OK >>>> safe >>>crasch>>> anymore start
Octagon SF3038 ;Formuler F1;XSPEED LX3;GIGABlu X1 >>alles mit openHDF 6.0 Beta
IntelCore PC E8400 3GHz:Gigabyte GA-P35-DS3;Windows7
Astra (19.2E)/Hotbird (13E) ASAT-9/8 Speedport SMART DSL50000

Offline Jürgen

  • der Löter
  • User a.D.
  • ****
  • Beiträge: 4999
  • white LED trough prism - WTF is cyan?
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #11 am: 29 November, 2012, 02:24 »
@jurgen: i figured this wud be the 'feedback' thread?
OK, so now it is. And sticky for now, as well.

Means, once I might find issues I did not yet inform you via PM, I would post them here.
Kein Support per persönlicher Mitteilung!
Fragen gehören in's Forum.

Veränderungen stehen an. Dies ist der bisherige Stand:
28,x°,23.5°,19,2°,13°Ost
,1mØ Multifeed, mit Quattro LNBs; Multiswitches 4x 5/10(+x) - alle ohne Terrestrik und modifiziert für nur ein 12V DC Steckernetzteil (Verbrauch insgesamt 15 Watt)
1mØ mit DiSEqC 1.3/USALS als LNB2 an DVB-S2 STB, aktuell 30°W bis 55°O
1.) FM2A88X Extreme6+, A8-6600K (APU mit 4x 3,9 GHz und Radeon HD8570D), 16GB DDR3 1866, 128GB SSD, 3TB HDD, Win10 x64 Pro 1909 / 10.0.17763.107, Terratec T-Stick Plus (für DAB+), Idle Verbrauch ca. 35 Watt
2.) FM2A75 Pro 4, A8-5600K (APU mit 4x 3,6 GHz und Radeon HD7530D), 8GB DDR3 1600, 128GB SSD, 2TB HDD, Win10 x64 Pro, Idle Verbrauch ca. 45 Watt
3.) Raspberry Pi 512MB u.a. mit Raspbian
4.) GA-MA770-UD3, Phenom II x4 940, 8GB DDR2, Radeon HD6570, 2TiB, USB 3.0, 10 Pro x64 (+ XP Pro 32bit (nur noch offline)), Ubuntu 10.4 64bit, Cinergy S2 USB HD, NOXON DAB+ Stick, MovieBox Plus USB, ...

Samsung LE32B530 + Benq G2412HD @ HDMI 4:2; Tokaï LTL-2202B
XORO HRS-9200 CI+ (DVB-S2); XORO HRT-8720 (DVB-T2 HD)
Empfänger nur für FTA genutzt / ohne Abos
YAMAHA RX-V663 (AV-Receiver); marantz 7MKII; Philips SHP2700 ...
FritzBox 7590 mit VDSL2 50000

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #12 am: 29 November, 2012, 12:42 »
ok np jurgen!
@ym*f*: got ur reprt. Looks like a new custom list issue (pretty nifty that). U mean sdvb don't run after that? I'm going to look at this nd send update!
btw: did this occur with existing chn list/empty install?
« Letzte Änderung: 29 November, 2012, 13:09 von jackjavo »

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #13 am: 29 November, 2012, 15:39 »
@yvm*f*:
i've sent u url with alterations f*r ur prob. (i hope, if not next crprt pls :)...
jack

Offline jackjavo

  • Entwickler
  • *****
  • Beiträge: 407
Re: SmartDVB 0.3.0 pre beta tests feedback thread
« Antwort #14 am: 29 November, 2012, 18:41 »
@yvm*f*:
i read somewhere that ur e460 device might use MS interface? The new bda.dev options allow this to be selected? Not tsted yet but i added that some time ago (like mentioned untsted so if u cud try that nd if not operational send me bda.log to see if MS interf*ce error occurs?