Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)

[SiLæncer]

Perform a wide range of tests on your network from your computer by turning to this comprehensive, all-in-one software application.

License: GPLv3

Changelog

    Breaking Changes:

    Migrated from .NET 6.0 (LTS) to .NET 8.0 (LTS).
    Upgrade your .NET Desktop Runtime to version 8.0 (LTS) - x64 before you install this version.
    Settings are reset due to the refactoring of the code base (Profiles are not affected)

    New Feature:

    Dashboard:

    Check IP geolocation
    Check DNS resolver used

    Traceroute:

    Check IP geolocation
    IP Geolocation Lookup (See https://borntoberoot.net/NETworkManager/Documentation/Application/IPGeolocation)

[close]

https://github.com/BornToBeRoot/NETworkManager

[SiLæncer]

This application features a collection of tools that target IP-related tasks, allowing one to easily send pings, perform check-ups, and monitor individual or multiple IPs.

License: MPL

https://decontev.com/#

[SiLæncer]

IP-Sniffer is a small command line tool that captures the IP traffic for a given network adapter. The tool is available for Windows and Linux systems. By using of protocol-, IP-address- and/or IP-port-filters a very special IP-traffic can be captured. An integrated Interprocess-Communication (IPC) client allows forwarding the filtered IP-traffic to other applications which run on the same system, e.g. the decontev IP-Proxy tool. (btw. IP-Proxy can be used to then forward this data to remote sites.) Additionally it can be set whether only the payload data or the entire IP-Frame shall be forwarded. Several filters can be defined and activated at the same time and for each of these filters a separate IPC channel can be opened. For easier and fast definition of filters an own configuration tool is provided.

License: MPL

https://decontev.com/#

[SiLæncer]

NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Escape null pointer exception for UserDao.joinGroup.
    Use cloud classifier for Jahaslist remote update.
    Do not cloud classifier query when html.errFlag set.
    Recat by cloud classifier when classification score is higer than 105.
    Creation time property for user and group has been added.
    Baselist has been updated to 4553610.

[close]

https://www.nxfilter.org/

[SiLæncer]

CurrPorts displays the list of all currently opened networking ports on your local computer. For each TCP/IP and UDP port in the list, information about the process that opened the port is displayed, including the process name, full path of the process, version information of the process (product name, file description, and so on), the time that the process was created, and the user that created it.

In addition, CurrPorts allows you to close unwanted TCP connections, kill the process that opened the ports, and save the TCP/UDP ports information to HTML file , XML file, or to tab-delimited text file. The program will automatically mark with pink suspicious ports owned by unidentified applications (applications without version information and icons).

A 64-bit version is available.

License: Freeware

Whats new:>>

Fixed bug: CurrPorts failed to display country/city information for IPv6 addresses.

https://www.nirsoft.net/utils/cports.html

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    Certificate - fixed CRL updating;
    Console - improved stability when removing script (introduced in v7.13beta3);
    Defconf - fixed configuration for Audience with "wifi-qcom-ac" package;
    Defconf - improved wifi interface detection after upgrade;
    Ethernet - improved system stability for L009 and hAP ax lite devices;
    Sfp - improved link establishment for SFP copper modules;

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

Get My IP is an excellent choice for individuals who require accurate information about their internal and external IP addresses. Through Get My IP, users can easily view their internal and external IP addresses, including geolocation data for the external IP address. The tool even has the capability to display multiple internal IP addresses, making it an ideal solution for those with complex networks.

License: Open Source

Changelog

    New: French language translation added courtesy of @logounet.
    New: Added option to hide Exit in the navigation menu. #55
    Updated: NLog and H.NotifyIcon.Wpf dependencies have been updated to their latest versions.
    Updated: Improved resiliency when internet connection is not available.
    New: Additional download and installation options. See below.

[close]

https://github.com/Timthreetwelve/GetMyIP

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Added: LAN-15983 Added a rate limiter to the service API to prevent thread starvation.
    Changed: LAN-4040 The LastSeen and LastTried fields are no longer updated for indirect scans (e.g. ESXi and Citrix guests, SCCM) and performance scanning. Indirect scan dates are now also kept in a separate table to allow for easy access.
    Changed: LAN-14558 Improved VMware scanning stability.
    Changed: LAN-15909 OT link in menu will redirect to the asset type report instead of the all assets page.
    Fixed: LAN-15876 Deployments sometimes failed, throwing several different errors.
    Fixed: LAN-15923 SCCM scans were not saved when a call ends abruptly.
    Fixed: LAN-15925 HTML formatting disappeared from Helpdesk tickets.
    Fixed: LAN-15932 VMware scanning sometimes failed because of XML errors.
    Fixed: LAN-15943 In rare cases, the scan server went down.
    Fixed: LAN-15991 Indexing of helpdesk tickets failed due to updated website CSRF checks.
    Fixed: LAN-15999 Event logs weren’t saved with LsAgent and LsPush scan imports.

[close]

http://www.lansweeper.com/

[SiLæncer]

Changelog

    package - convert "wireless" and "wifi" packages automatically, if upgrading from v7.12
    wifi - split existing "wifiwave2" package into separate packages "wifi-qcom", "wifi-qcom-ac", and include required utilities for WiFi management into bundle
    wireless - separate "wireless" package from bundle and build as a standalone package
    bridge - added automatic "path-cost" values depending on interface rate
    bridge - added bridge interface property "port-cost-mode" with "short" and "long" arguments
    bridge - fixed bogus VLAN entries from wifi when vlan-filtering is not enabled
    bridge - improved HW offload enable
    bridge - improved host flush when removing VLAN on HW offloaded bridge
    bth - added "VPN Prefer Relay Code" option
    bth - improved automatic firewall rule generation process
    certificate - add support for multiple DNS names for Let's Encrypt
    certificate - added HTTP redirect support for CRL download
    certificate - added support for certificates with key size 16384
    certificate - fixed CRL updating
    certificate - fixed certificate auto renewal via SCEP when certificate contains "subject-alt-name"
    certificate - improved CRL signature verification and download error messages
    certificate - improved initial certificate creation using SCEP
    certificate - use error topic for CRL update failures
    cloud - improved re-connect speed after network related connection errors
    console - added ":grep" command
    console - added ":onerror" command
    console - added ":serialize" and ":deserialize" commands for converting values to/from JSON
    console - added "interface" name when printing "interface/pppoe-server" entries
    console - added "read" command under "file" menu
    console - added "where" functionality for "export" command
    console - added flags to "print" command with "value-list"
    console - added interface helper for "gateway" property under "ip/route" menu
    console - added unset option for "ssid-regex" and "allow-signal-out-of-range" properties under "interface/wifi/access-list" menu
    console - clear console history when resetting configuration
    console - disallow setting existing "name" under "system/script" and "system/scheduler" menus
    console - fixed "export" boolean arguments when saving output to file using API
    console - fixed "interface/ethernet/switch/port-isolation" export
    console - fixed "on-event" argument highlighting under "system/scheduler" menu
    console - fixed graphic distortions in WinBox
    console - fixed issue where API incorrectly asks for missing arguments
    console - fixed printing to file using API
    console - ignore negative values for ":delay" command
    console - improved flag printing in certain menus
    console - improved stability when running "tool/ping" from API
    console - removed "route-cache" setting from "ip/settings" menu
    console - replace reserved characters in file and script names with underscores
    console - resolve "wifiwave2" directory to "wifi"
    console - show "l2vpn-link" address family under "routing/route" menu
    console - use more compact login screen for empty branding
    defconf - expire password when reverting configuration
    defconf - fixed bogus wifi password on certain Audience devices
    defconf - fixed configuration for Audience with "wifi-qcom-ac" package
    defconf - fixed wireless band and channel-width selection (introduced in v7.12)
    defconf - hide default configuration for users without "sensitive" policy
    defconf - improved wifi interface detection after upgrade
    defconf - updated configuration with new "wifi" directory
    defconf - use "WISP Bridge" default configuration mode for RBGrooveGA-52HPacn device
    defconf - use "fan-min-speed-percent=25" for CRS354-48P-4S+2Q+ device
    defconf - use device factory preset credentials when using CAPs mode
    defconf - use one SSID and enable FT when using "wifi" packages
    disk - fixed hang on reboot when network file systems mounted
    ethernet - improved packet CPU core classifier for Alpine CPUs for non IPv4/IPv6 traffic
    ethernet - improved system stability for L009 and hAP ax lite devices
    fetch - added "http-auth-scheme" parameter, allows to select HTTP basic or digest authentication
    fetch - added "http-content-encoding" setting
    fetch - added raw logging
    fetch - allow to receive HTTP response headers
    fetch - require "ftp" user policy
    firewall - added "nat-pmp" support
    firewall - added new IPv6 filter arguments "icmp-err-src-routing-header" and "icmp-headers-too-long" for "reject-with" setting
    firewall - do not mark all IPv6 GRE packets as invalid
    firewall - fixed IPv6 address-list timeout
    firewall - fixed altered address-list when upgrading from RouterOS v6
    firewall - fixed connections being tracked when tracking is disabled
    firewall - removed "prohibited" and "unreachable" IPv4 address-type arguments
    ftp - improved upload and download speeds
    health - dynamically add and remove invalid sensors (e.g. sfp-temperature)
    hotspot - fixed incorrect host moving to VLAN 0 when receiving packets through bridge
    ike2 - fixed ike2 double reply
    iot - fixed incorrect LoRa ACK packet handling during downlink messaging (introduced in v7.12)
    ipv6 - do not send out IPv6 RA deprecate message for re-used prefix
    isis - added IS-IS protocol support (CLI only)
    l3hw - fixed routing for IPsec encapsulated packets
    leds - fixed LED indication in multi-APN setup for Chateau
    leds - improved LED indication during modem registration state for Chateau
    log - added "fetch" topic
    lora - added CUPs protocol support
    lora - fixed issue with lost LoRa configuration when rebooting the device
    lte - added RNDIS support for neoway N75-EA modem
    lte - added support for FOTA firmware upgrade from custom URL for R11eL-FG621-EA
    lte - disabled IMS service for Chateau 5G on A1 HR network
    lte - fixed rare cases where Chateau 5G in passthrough mode may stop forwarding packets
    lte - improved SIM slot status change notification handling for MBIM modems
    lte - replaced "passthrough-subnet-selection" with "passthrough-subnet-size" setting (CLI only)
    lte - show each CA band in a new line
    mipsbe - improved system stability when removing USB devices
    mmips - properly mount and unmount USB devices
    modem - added option to read SMS using MBIM interface
    mpls - added "te-tunnel" property for VPLS monitor (CLI only)
    mpls - fixed IPv6 RSVP-TE
    mpls - improved logging
    netinstall-cli - added more details to help messages
    ospf - fixed LSA Type3 advertisement for OSPFv2
    ospf - fixed missing OSPF interface on L2TP interface reconnect
    ospf - fixed missing opaque bit in opaque LSA
    ovpn - improved memory allocation during key-renegotiation
    ovpn - removed "ping-timer-rem" option from client config file
    package - added warning log about missing "wireless" or "wifi" package
    pimsm - improved elected BSR change
    poe-out - improved firmware upgrade stability for AF/AT controlled boards
    ppc - fixed RouterOS bootup (introduced in v7.12)
    ppp - added remote-ipv6-prefix to IPv6 firewall address-list if "address-list" property is provided
    ppp - allow at-chat and info commands in "waiting for packets" state for modems with shared data/info channel
    ppp - improved IPv6 link-local address uniqueness
    pppoe-server - fixed connection count limit per license level
    profiler - improved "disk" and "supout.rif" classifiers
    qos-hw - added initial congestion avoidance support for 98DX224S, 98DX226S, and 98DX3236 switch chips (CLI only)
    qsfp - added support for QSFP-to-SFP adapters
    qsfp - fixed supported rates for breakout cables (introduced in v7.12)
    quickset - show DDNS name as VPN address for devices with new style serial number
    route-filter - improved performance
    sfp - added "1G-baseT" link mode for modules that supports "2.5G-baseT" mode
    sfp - allow 2.5G rates only in forced link mode
    sfp - fixed link establishment with S+DA0001 DAC cables
    sfp - ignore irrelevant extended compliance code for SFP modules
    sfp - improved SFP interface handling for 98DX224S, 98DX226S, 98DX3236, 98DX8208, and 98DX8216 switch chips
    sfp - improved link establishment for SFP copper modules
    sfp - improved link establishment with certain modules for hEX S device
    sfp - show 10M and 100M supported rates for RJ45 copper modules
    ssh - added cipher and hash function acceleration for ARM64 and x86 architectures
    ssh - fix error that caused large chunks of text not being pasted in their entirety into console
    supout - added VXLAN FDB section
    supout - added multiple WiFi sections
    switch - fixed service VLAN tagged IP multicast packets for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255 switches
    system - added "rtrace" debugging tool (CLI only)
    system - improved incoming and outgoing TCP connection performance
    system - improved internal process communication performance
    traffic-generator - improved system stability when modifying interfaces
    usb - added support for RTL8152 USB ethernet on ARM, ARM64 and x86
    vpls - improved performance when decapsulating data
    vrf - fixed ICMP reply lookup
    webfig - allow to display comments in multiline or compact modes
    webfig - make table headers always visible
    webfig - use local storage for user preferences
    wifi - added "flat-snoop" tool for surveying WiFi APs and stations (CLI only)
    wifi - added "radio-mac" variable for "name-format" provisioning setting
    wifi - added "remove" command in "capsman/remote-cap" menu
    wifi - after radar detections, avoid selection of channels not permitted by the user
    wifi - changed CAPsMAN generated certificate common name
    wifi - create first interface without number when using "name-format" provisioning setting
    wifi - enable protected interworking ANQP responses
    wifi - fixed EAP authentication failures when the Session-Timout RADIUS attribute is defined
    wifi - fixed occasional failures to start on 20/40mhz-eC channels for 2.4GHz 802.11ax interfaces
    wifi - fixed overridden datapath settings on CAP when unsetting from CAPsMAN
    wifi - improved CAPsMAN stability during provisioning
    wifi - make slave APs use datapath bridge settings inherited from master by default
    wifi - removed "openflow-switch" setting
    wifi-qcom - added fast-path for received packets
    winbox - added "Hw. Offload" property under "IP/Firewall/Filter" menu
    winbox - added "Ping" button under "IP/DHCP Server/Leases" menu
    winbox - added "Tx bps" and "Rx bps" monitor values under "WiFi/Registration" menu
    winbox - added "none" argument for "Preshared Key" under "WireGuard/Peers" menu
    winbox - added icon to entries under "WiFi/Access List" menu
    winbox - added missing "qos-classifier" argument for "Hw. Caps" under "WiFi/Radios" menu
    winbox - added missing arguments for "MAC Format" under "Wireless/Security Profiles/RADIUS" menu
    winbox - allow opening entries under "WiFi/Registration" menu
    winbox - fixed default "Name Format" property under "WiFi/Provisioning" menu
    winbox - fixed minor typo under "Routing/BFD" menu
    winbox - improved connection speed
    winbox - updated "wireless" and "wifi" menus
    wireless - fixed "wlan1" default name for RBSXTsqG-5acD and RBLDFG-5acD
    wireless - fixed snooper information gathering from re-assocation requests
    wireless - keep configuration after manual package removal

[close]

http://www.mikrotik.com/thedude.php

[SiLæncer]

TcpLogView monitors the opened TCP connections on your system, and adds a new log line every time that a TCP connection is opened or closed. For every log line, the following information is displayed: Even Time, Event Type (Open, Close, Listen), Local Address, Remote Address, Remote Host Name, Local Port, Remote Port, Process ID, Process Name, and the country information of the Remote IP (Requires to download IP to country file separately.)

Freeware

Whats new:>>

Added 'CaptureInterval' value to the .cfg file. This value determines the number of milliseconds that TcpLogView waits before taking the next TCP connections snapshot. The default interval is 100 milliseconds (In previous versions it was 250 milliseconds). You can manually decrease this value if you want to capture TCP connections opened for very short time.

http://www.nirsoft.net/utils/tcp_log_view.html

[SiLæncer]

MiTeC Network Scanner is a robust, mutli-threaded Port, IP, NetBIOS and SNMP scanner with many advanced features intended for both system administrators and general users who are interested in computer security.

MiTeC Network Scanner performs ping sweeps, scans for opened TCP and UDP ports, resource shares and services. For devices with SNMP capability available interfaces are detected and basic propeaties displayed. It also allows you to edit results, save/load results to/from CSV and print network device list and any data in any section can be exported to CSV. It can also resolve host names and auto-detect your local IP range.

Freeware

Whats new:>>

* Bug fixes
* Internal engines rewritten from the scratch
* UI and High-DPI fixes

http://www.mitec.cz/netscan.html

[SiLæncer]

Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Freemium

Changelog

    Changed: LAN-16101 Improvements have been made to the processing of incoming LsAgent files, specifically when saving Windows certificates.
    Fixed: LAN-15989 Active Directory scans failed when passwords contained “@” or “¤.“
    Fixed: LAN-16014 Microsoft 365 FallbackToV1 scanning failed if PowerShell 7.1 or higher is installed on the Lansweeper scanning server.
    Fixed: LAN-16039 The startup process of the scanning service could be delayed due to email account errors in the helpdesk.
    Fixed: LAN-16077 Foreign key constraint errors could occur when deleting assets scanned through Microsoft Entra ID.

[close]

http://www.lansweeper.com/

[SiLæncer]

This is an open-source DNS Changer for Windows, Mac, and Linux operating systems. Its goal is to gather the best DNS servers in a secure application.

MIT License

Whats new:>>

    Feat: Default Server, set the default DNS server for your system. This will be used when no custom server is set. (Optional)
    Feat: added open log file
    Refactor setting page layout

https://github.com/DnsChanger/dnsChanger-desktop

[SiLæncer]

With Homedale you can monitor the signal strength of multiple WLAN Access Points. You can view a summary of all available access points with their signal strength, encryption [WEP/WPA/WPA2], speed, channel and other settings. You can also see the signal strength of selected access points in a graph over the time. With a right mouse click, you can start logging and create a screenshot.

Freeware

Whats new:>>

Channel width display improved

https://www.the-sz.com/products/homedale/

[SiLæncer]

The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

Notice - Starting from RouterOS version 7.13, significant changes have been made to the RouterOS wireless packages. This is done due to a new product development which will require more disk space for hardware drivers so we had to split it in order to maintain old products alongside the new ones. More wireless packages are yet to come.

1. When upgrading by using "check-for-updates", all versions earlier than 7.12 will display 7.12 as the latest available version. Upgrade from v7.12 to v7.13 or later versions must be done through 7.12 in order to convert wireless packages automatically. Fresh installation with Netinstall or manual package installation works in the same manner as always.

2. Drivers for older wireless and 60GHz interfaces, as well as the wireless management system CAPsMAN, are now part of a separate "wireless" package instead of being a part of the bundle package. This package can be uninstalled if not needed.

3. The existing "wifiwave2" package has been divided into distinct packages: "wifi-qcom" and "wifi-qcom-ac", and the necessary utilities for WiFi management are now included in the RouterOS bundle. RouterOS and "wifi-qcom-ac" packages alongside each other now fit into 16MB flash memory.

What's new in 7.13.5 (2024-Feb-16 19:35):

*) bridge - fixed MLAG connection after peer-link flap (introduced in v7.13);
*) bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13);
*) dns - do not close connection with DoH server after query execution (introduced in v7.13.3);
*) leds - fixed modem signal strength for RBSXTR&R11e-LTE (introduced in v7.13);
*) sms - increased SMS read timeout;
*) wifi-qcom - improved memory allocating process;
*) wifi-qcom - improved regulatory compliance for L11, L22 devices;
*) wifi-qcom - improved system stability for L11, L22 devices;

[close]

http://www.mikrotik.com/thedude.php