Autor Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)  (Gelesen 251879 mal)

0 Mitglieder und 7 Gäste betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
IP-Sniff 5.7.3.2174
« Antwort #4095 am: 25 März, 2024, 07:50 »
IP-Sniffer is a small command line tool that captures the IP traffic for a given network adapter. The tool is available for Windows and Linux systems. By using of protocol-, IP-address- and/or IP-port-filters a very special IP-traffic can be captured. An integrated Interprocess-Communication (IPC) client allows forwarding the filtered IP-traffic to other applications which run on the same system, e.g. the decontev IP-Proxy tool. (btw. IP-Proxy can be used to then forward this data to remote sites.) Additionally it can be set whether only the payload data or the entire IP-Frame shall be forwarded. Several filters can be defined and activated at the same time and for each of these filters a separate IPC channel can be opened. For easier and fast definition of filters an own configuration tool is provided.

License: MPL

https://decontev.com/#

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
CheckIP 2.3.0
« Antwort #4096 am: 25 März, 2024, 08:20 »
CheckIP is a GUI-based application that provides comprehensive information about an IP address. Whether you’re curious about the geographical location, network details, or other relevant data related to an IP, CheckIP has you covered.

License: Open Source

Changelog


 New Features

    New improved UI
    New languages: German & Italian (thanks to @bovirus)
    Async loading spinner

 Bug Fixes

    Fixed error message "Not connected with Internet"

 Quality of Life

    Upgrade to .NET 8.0
    Using HttpClient instead of WebClient
    Bump dependency WPF-UI to 3.0.2

[close]

https://github.com/valnoxy/checkip

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
The Dude 7.15 Beta 8
« Antwort #4097 am: 25 März, 2024, 19:10 »
The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog


*) bridge - added MVRP support;
*) bridge - improved protocol-mode STP, RSTP and MSTP stability;
*) bridge - reworked dynamic VLAN creation;
*) certificate - added support for different ACME servers for ssl-certificate (CLI only);
*) console - fixed DHCP server "authoritative=no" configuration export;
*) console - improved stability;
*) container - do not allow negative number for "ram-high" setting;
*) defconf - do not override default DHCP server lease time;
*) disk - improved system stability when adding partition with no parent;
*) eap - improved eap-peap, eap-mschap2 client authentication (dot1x/wireless/ipsec);
*) ethernet - fixed interface disable for CRS326-4C+20G+2Q;
*) ethernet - improved port speed downshift functionality for CRS326-4C+20G+2Q;
*) fetch - changed topic "info" to "error" for permission denied logs;
*) fetch - fixed slow throughput due to "raw" logging which occurred even when not listening to the topic (introduced in v7.13);
*) file - fixed moving files to/from external storage (introduced in v7.15beta4);
*) health - added "cpu-temperature" for IPQ50xx devices;
*) health - fixed fan behavior for CRS310-1G-5S-4S+ (introduced in v7.14);
*) health - fixed rogue voltage on CRS510-8XS-2XQ-IN;
*) leds - fixed LEDs for L22 device;
*) lte - fixed firmware upgrade not found issue for Chateau LTE12 (introduced in v7.15beta4);
*) media - added support for DLNA;
*) metarouter - removed support;
*) netinstall - improved stability;
*) ovpn - fixed import ovpn config when remote port is missing;
*) package - reduced "wireless" package size for ARM, ARM64 devices;
*) package - reduced package size for SMIPS;
*) ppp - added "enable-ipv6-accounting" option under PPP AAA menu (CLI only);
*) ppp - added addition support to monitor modem registration state, RSRP, RSRQ, SINR, PCI, CellID for BG77 modem;
*) qos-hw - fixed port "print stats/usage" when using "from" property;
*) quicksest - only show LTE mode for devices without other wireless interfaces;
*) route - rework of route attributes;
*) route-filter - allow setting different AFI gateways;
*) sfp - fixed "sfp-tx-fault" state indication for CRS510;
*) sfp - improved auto-negotiation linking for some MikroTik cables and modules;
*) sfp - improved system stability with some GPON modules for CCR2004 and CCR2116 devices;
*) socks - attempt to parse domain name as IP before resolving;
*) ssh - require "policy" user policy when adding public key;
*) system - fixed upgrade for CCR2004-1G-12S+2XS (introduced in v7.15beta6);
*) system - updated office address in RouterOS license;
*) system - updated online manual links from "wiki" to the help documentation;
*) timezone - updated timezone information from "tzdata2024a" release;
*) traffic-flow - improved system stability;
*) webfig - allow pasting with ctrl+v into terminal;
*) webfig - fixed column preferences for ordered tables;
*) wifi - changed interface default to "disabled=yes";
*) wifi - improve regulatory compliance for L11, L22 devices;
*) wifi - improved stability of DFS check in the 5GHz-A band;
*) wifi - improved system stability when provisioning CAPs in certain cases;
*) wifi - show inherited properties with "print" command (replaces "actual-configuration") and added "print config" for showing only configured values;
*) winbox - fixed the issue where the skin file fails to appear in the user group menu after creation;
*) winbox - updated icons for WireGuard and ZeroTier menus;
*) wireguard - added option to mark peer as responder only (CLI only);
*) wireless - perform shorter channel availability check for 5600-5650MHz if regulatory domain permits it;
*) x86 - improved stability for RTL8125 driver;
*) x86/chr - improved panic saving (increased minimal RAM requirements to 256MB);

[close]

http://www.mikrotik.com/thedude.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
IPNeighborsView 1.02
« Antwort #4098 am: 25 März, 2024, 22:20 »
IPNeighborsView is a tool for Windows 10/8/7/Vista that displays the IP neighbor table of your local computer. For every IP neighbor entry, the following information is displayed: IP Address, MAC Address, MAC Address Company, State, State Time, Local Adapter Name, Local Connection Name.

In the IP neighbor table, you can find the details of computers and devices recently connected to your network. computers and devices are listed only if Windows operating system detected them.

Freeware

Whats new:>>

Added 'Put Icon On Tray' option.

https://www.nirsoft.net/utils/ip_neighbor_table_view.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
IP Lookup 1.8
« Antwort #4099 am: 26 März, 2024, 07:40 »
IP Lookup provides you with a simple option for looking up your internal and external IP addresses.

IP Lookup is a simple and to the point utility that has a specific job and does it well. IP Lookup is displayed from a minimalistic interface that does offer a few settings like always on top and language selection. It can be portable if desired. To activate the portable mode, create "iplookup.ini" in the application folder, or move it from "%APPDATA%Henry++Ip Lookup."

License: Open Source

Whats new:>>

dropped windows 7 and windows 8 support
added mitigations (win10+)
added dark theme support
updated localization

https://github.com/henrypp/iplookup

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
Get My IP 0.10.0
« Antwort #4100 am: Gestern um 07:40 »
Get My IP is an excellent choice for individuals who require accurate information about their internal and external IP addresses. Through Get My IP, users can easily view their internal and external IP addresses, including geolocation data for the external IP address. The tool even has the capability to display multiple internal IP addresses, making it an ideal solution for those with complex networks.

License: Open Source

Changelog


Changes:

    Updated: Migrated to .NET 8. See next section for more information.
    Updated: Replaced ipext.org with seeip.org
    Updated: Migrated Material Design in XAML to version 5.0.0
    Updated: Upgraded Octokit to version 10.0.0
    Updated: Upgraded H.NotifyIcon to version 2.0.124
    Updated: Upgraded NLog to 5.2.8
    Updated: Several language updates
    Updated: Minor localization tweaks
    Added: Ctrl+Minus and Ctrl+Minus keyboard shortcuts to adjust size
    Fixed: Grid background wasn't updating after a theme change
    Fixed: Date format on About page should now be localized correctly

Change to .NET 8

    Starting with version 0.10.0, Get My IP uses the .NET 8 desktop runtime.
    .NET 8 is the current Long Term Support release of .NET and will be supported until November 2026.
    If you can't upgrade to .NET 8, you can still use Get My IP by choosing one of the self-contained versions to download.
    If you want to upgrade to .NET 8, you can find it here : https://dotnet.microsoft.com/en-us/download/dotnet/8.0

[close]

https://github.com/Timthreetwelve/GetMyIP

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
HTTP Toolkit 1.14.11
« Antwort #4101 am: Gestern um 19:10 »
HTTP Toolkit offers automatic interception of HTTP and HTTPS traffic from most clients, including web browsers like Chrome and Firefox, all CLI tools, and back-end languages (Node.js, Python, etc. Ruby, and more).

License: Open Source / Freemium

https://httptoolkit.tech/mock

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
The Dude 7.14.2
« Antwort #4102 am: Gestern um 21:30 »
Changelog


    Defconf - do not override default DHCP server lease time;
    Defconf - fixed 5ghz-ax channel width for L11, L22 devices;
    Ethernet - fixed interface disable for CRS326-4C+20G+2Q;
    Ethernet - improved port speed downshift functionality for CRS326-4C+20G+2Q;
    Leds - fixed LEDs for L22 device;
    Lte - fixed firmware upgrade not found issue for Chateau LTE12 (introduced in v7.14.1);
    Ssh - require "policy" user policy when adding public key;
    Timezone - updated timezone information from "tzdata2024a" release;
    Traffic-flow - improved system stability;
    Vrf - fixed VRF interfaces being moved to main table after reboot (introduced in v7.14);
    Wifi-qcom - added configuration.distance setting to enable operation over multi-kilometer distances (CLI only);

[close]

http://www.mikrotik.com/thedude.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189138
  • Ohne Input kein Output
    • DVB-Cube
ManageWirelessNetworks 1.13
« Antwort #4103 am: Heute um 10:30 »
ManageWirelessNetworks is an alternative tool to the standard 'Manage Wireless Networks' of Windows (or 'Manage Known Networks' on Windows 10). It displays extensive information about every wireless profile on your system, even if the network adapter is not active. For every wireless profile, the following information is displayed: Profile Name, SSID, Connection Type, Connection Mode, Authentication, Encryption, Key Type, Auto Switch (Yes/No), Non Broadcast (Yes/No), Profile Position, Created Time, Modified Time, Wireless Key, and more...

ManageWirelessNetworks also allows you to edit a single profile with the standard editor of Windows, edit the XML of the wireless profile (For advanced users only !), quickly switch between manual and automatic mode, quickly switch between WPAPSK/WPA2PSK/AES/TKIP modes, rename the profile, rename the SSID, move profile position up and down, copy multiple wireless profiles to another wireless card on your system, and more...

Freeware

Whats new:>>

Fixed issue: When copying data to the clipboard or exporting to tab-delimited file, every line contained an empty field in the end of the line.

https://www.nirsoft.net/utils/manage_wireless_networks.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )