Autor Thema: Netzwerktools (WAN, LAN, WLan, Bluetooth ...)  (Gelesen 251959 mal)

0 Mitglieder und 9 Gäste betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
The Dude 6.47 RC 2
« Antwort #2925 am: 26 Mai, 2020, 13:40 »
The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

License: Freeware

Changelog

    api - added ECDHE cipher support for "api-ssl" service;
    bonding - fixed ALB and TLB bonding modes after interface disable/enable (introduced in v6.47beta19);
    bonding - fixed packet receiving on bonding slave ports (introduced in v6.47beta19);
    bridge - added warning message when a bridge port gets dynamically added to VLAN range;
    chr - added support for hardware watchdog on ESXI;
    crs3xx - fixed tagged VLAN packet receiving on Ethernet interfaces for CRS354 devices (introduced in v6.47beta49);
    crs3xx - improved 10G interface initialization on CRS312 devices;
    dhcpv4-server - disallow zero lease-time setting;
    dhcpv6-server - do not require "server" parameter for bindings;
    dns - added support for multiple type static entries;
    dot1x - added "radius-mac-format" parameter;
    dot1x - improved Dot1X service stability when receiving bogus packets;
    dot1x - improved value validation for dynamically created switch rules;
    email - added support for multiple "to" recipients;
    ethernet - fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS;
    filesystem - fixed NAND memory going into read-only mode or becoming unstable over time;
    health - improved stability for system health monitor on CCR2004-1G-12S+2XS;
    ike2 - added support for RFC8598;
    ike2 - allow initiator address change before authentication;
    ike2 - fixed authentication handling when initiator disconnects before RADIUS response;
    interface - improved system stability when receiving bogus packets;
    ipsec - added "split-dns" parameter support for mode configuration;
    ipsec - added "use-responder-dns" parameter support;
    ipsec - allow specifying two peers for a single policy for failover;
    ipsec - place dynamically created IPsec policies at the begining of the table;
    l2tp - added "src-address" parameter for L2TP client;
    l2tp - added "use-peer-dns" parameter for L2TP client;
    l2tp - improved dynamically created IPsec configuration updating;
    l2tp - use L2TP interface when adding dynamic IPsec peer;
    lcd - improved general system stability when LCD is not present;
    log - added logging entry when changing user's password;
    log - added tunnel endpoint address to establishment and disconnect logging entries;
    log - fixed logging topic for MAC address learning on a different bridge port events;
    log - made startup script failures log as critical errors;
    lte - fixed "band" parameter persistence after disable/enable;
    lte - fixed "ecno" and "rscp" value reporting on R11e-LTE6;
    lte - fixed VLAN interface passthrough support;
    lte - improved stability during firmware upgrade;
    netwatch - improved Netwatch service stability when invalid configuration values are passed;
    ovpn - added "use-peer-dns" parameter for OVPN client;
    poe - fixed missing PoE out settings on CRS354-48P-4S+2Q (introduced in v6.47beta49);
    port - removed serial console port on hEX S;
    ppp - removed "comment", "set" and "edit" commands from "PPP->Active" menu;
    pptp - added "use-peer-dns" parameter for PPTP client;
    profile - added support for CCR2004-1G-12S+2XS;
    qsfp - added support for FEC mode (fec74), with the FEC mode disabled by default
    quickset - fixed invalid configuration applying when performing changes during LTE modem initialization process;
    routerboard - added "hold-time" parameter to mode-button menu;
    routerboard - added "reset-button" menu - custom command execution with reset button;
    routing - improved routing service stability when receiving bogus packets;
    sfp28 - added support for FEC modes (fec74 and fec91), with fec91 mode already enabled by default;
    sfp28 - fixed interface linking after power cycle on CCR2004-1G-12S+2XS (introduced in v6.47beta49);
    switch - correctly enable and disable CPU Flow Control on RB3011UiAS;
    tr069-client - added LTE firmware update functionality support;
    tr069-client - added additional LTE information parameters;
    tr069-client - added additional wireless registration table parameters;
    tr069-client - added interface type parameter support;
    tr069-client - added multiple simultaneous session support for diagnostics test;
    tr069-client - added total connection tracking entries parameter;
    ups - added battery info for APC SmartUPS 2200;
    webfig - fixed 5GHz wireless interface "frequency" parameter value list on Audience;
    winbox - added "auth-info" parameter under "Dot1X->Active" menu;
    winbox - added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server;
    winbox - added "bus" parameter for "USB Power Reset" command on NetMetal ac^2;
    winbox - added "comment" parameter and "dynamic" flag support under "Switch->Rule" table;
    winbox - added "comment" parameter for Dot1X client;
    winbox - added "region" parameter for W60G interfaces;
    winbox - added "skip-dfs-channels" parameter to wireless interface menu;
    winbox - added enable and disable buttons for "MPLS->MPLS Interface" table;
    winbox - do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
    winbox - fixed WDS usage when connecting to RouterOS access point using QuickSet;
    winbox - fixed dates and times in interface link up/down properties (WinBox v3.24 required);
    winbox - fixed wireless sniffer parameter setting;
    wireless - fixed Nstreme wireless protocol performance decrease;
    wireless - updated "egypt" regulatory domain information;

[close]

http://www.mikrotik.com/thedude.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
PingPlotter 5.17.0
« Antwort #2926 am: 29 Mai, 2020, 13:40 »
PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

New Features

    Multi-user management - Set up accounts and permissions for multiple PingPlotter web interface users, limiting their edit access for traces, summaries, or other users
    Live Share - Share and manage unique weblinks that display current network conditions for specific targets or summaries, allowing you to show results to specific people without giving them access to anything they shouldn’t see

Improvements

    Improved web trace graph column resize/drag, making for a smoother experience
    Improved the layout of the trace graph column selector
    Improved web interface performance and memory/cpu usage

Fixes

    Fixed packet loss overstatement on PP2 imports
    Fixed packet send delay editor
    Fixed jitter column sorting in the web interface
    Fixed column adjustment algorithm in the web interface
    Fixed previous issues with the jitter column

Known Issues

    If a setting is changed that would require the web server to internally restart (such as authentication, changing the admin username/password, or a license change), the web interface will no longer live update. Currently, this can be resolved by stopping and restarting the PingPlotter service.

[close]

http://www.pingman.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
Lansweeper 8.0.130.19
« Antwort #2927 am: 29 Mai, 2020, 20:30 »
Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Whats new:>>

Changed: LAN-5220 Modified the certificate check in the LsAgent client for Windows to make it more future-proof

http://www.lansweeper.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
WinPing 1.05
« Antwort #2928 am: 30 Mai, 2020, 20:50 »
WinPing ist ein kleines Programm, mit dem Sie sowohl Verbindungen im lokalen Netzwerk, als auch im Internet prüfen, bzw. messen können.

Freeware

Whats new:>>

Kleine Feinabstimmung in der Windows Ping-Alternative
Fehlerbehebung: Wenn die Standard-Systemsprache erkannt wird

http://www.softwareok.de/?seite=Freeware/WinPing

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
The Dude 6.47 Final
« Antwort #2929 am: 02 Juni, 2020, 18:30 »
Whats new:>>

    dns - added client side support for DNS over HTTPS (DoH) (RFC8484);
    socks - added support for SOCKS5 (RFC 1928);
    user - enable "winbox" policy for groups with "dude" policy automatically on upgrade;

http://www.mikrotik.com/thedude.php

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
Angry IP Scanner 3.7.2
« Antwort #2930 am: 03 Juni, 2020, 06:10 »
Angry IP Scanner (or simply ipscan) is an open-source and cross-platform network scanner designed to be fast and simple to use. It scans IP addresses and ports as well as has many other features.

It is widely used by network administrators and just curious users around the world, including large and small enterprises, banks, and government agencies.

Freeware

Changelog

    Fix choosing openers from main menu on macOS #243
    Install 64-bit binary by Windows installer if Java is not detected at all #245

[close]

https://angryip.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
GNS3 2.2.9
« Antwort #2931 am: 04 Juni, 2020, 13:50 »
GNS3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations or configure devices ranging from simple workstations to powerful Cisco routers.

License: Open Source

Changelog

    GUI:

    FiGUI doesn't detect another GUI on macOS. Fixes #2994
    Support to activate/deactive network connection state replication in Qemu.
    Option to reset or not all MAC addresses when exporting or duplicating a project.
    FiMulti-device selection/deselection not working as expected with right click. Fixes #2986
    Replace Raven by Sentry SDK. Fixes GNS3/gns3-server#1758
    Fionline help menu URL. Fixes #2984
    Require setuptools>=17.1 in setup.py. Ref GNS3/gns3-server#1751 This is to support environmental markers. https://github.com/pypa/setuptools/blob/master/CHANGES.rst#171
    Update README. Ref GNS3/gns3-server#1719
    Restore editReadme attribute which was removed in Change 'New export project wizard'
    Updated GUI pyqt files from Tab Order 'fixes' in "Tab Order in Preferences and Project Dialog #2872"

    Server:

    Release Web-Ui version 2020.2.0-beta.4
    Support to activate/deactive network connection state replication in Qemu.
    Possible fifor problem connecting to the GNS3 VM. Ref #2969 #1760
    Option to reset or not all MAC addresses when exporting or duplicating a project.
    Fibug when changing properties for closed project. Fixes #1754
    Fiissues with crash reporting & bump version to 2.2.9dev2. Ref GNS3/gns3-server#1758
    Lock listing VMs. Ref #1755
    Try to fierror when listing Hyper-V VMs. Ref #1755
    Catch VirtualBoerrors when listing VMs. Fixes #1759
    Deprecate running with Python 3.5
    aiocontextvars is only necessary for Python < 3.7
    Replace Raven by Sentry SDK. Fixes GNS3/gns3-server#1758
    Require setuptools>=17.1 in setup.py. Ref GNS3/gns3-server#1751 This is to support environmental markers. https://github.com/pypa/setuptools/blob/master/CHANGES.rst#171

[close]

https://www.gns3.com/software

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
Acrylic Wi-Fi Home 4.4.7459.32300
« Antwort #2932 am: 04 Juni, 2020, 21:25 »
A complex and reliable program whose main purpose is to help you monitor the Wi-fi networks near you and add them to an inventory.

Freeware

https://www.acrylicwifi.com/en/wlan-wifi-wireless-network-software-tools/wlan-scanner-acrylic-wifi-free/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
NxFilter 4.3.7.2
« Antwort #2933 am: 05 Juni, 2020, 12:50 »
NxFilter is a useful software that was created to help administrators track HTTP traffic on a network. Using NxFilter, one can block not only the Internet traffic to specific webpages or domains, but also programs that use DNS.

Freeware

Changelog

    Don't start a new thread for upstream query.
    Rewrite ZoneTransfer and ZoneLookup classes according to library update.
    'Allowed IP for Login Redirection' has been removed.
    New IP based access control, 'DNS > Access Control' has been added.
    Login redirection only works when it's A or AAAA query.
    Use IpRangeMap for UserDic.findByIp.
    Baselist has been updated to 3557219.

[close]

http://www.nxfilter.org/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
PingoMeter 0.9.2
« Antwort #2934 am: 05 Juni, 2020, 17:15 »
PingoMeter is a portable, open source app that shows your ping as an icon in the taskbar. PingoMeter is lightweight and unobtrusive. Just line your mouse over the icon to see your ping at any time. Right-click on settings or to exit. Under settings, you will find numerous color options, update time settings, max ping interval, optional alarms, and the option to choose the IP to ping.

PingoMeter is an excellent choice for gamers who want to see their real ping times or for anyone diagnosing internet connection issues, or both.

License: Open Source

Whats new:>>

    Timeout alarm fix
    Cleanup code
    Mutex was removed

https://github.com/EFLFE/PingoMeter

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
EMCO WakeOnLan 2.0.6.1030
« Antwort #2935 am: 06 Juni, 2020, 08:30 »
EMCO WakeOnLan Free is a professional utility that enables users to send WOL packets to computers on a network and power them up.

The application is designed to operate in enterprise networks, which may include domains, workgroups and multiple subnets, to power up one or multiple remote PCs within the scope of a single operation.

The centralized WOL operation can be initiated with just one mouse click. You don't need to enter MAC addresses of remote PCs in order to wake them up remotely.

The application retrieves MAC addresses automatically using four MAC detection mechanisms. Depending on your network configuration, the application allows you to use different Wake-on-LAN packet transmission methods to be sure that the WOL packet will not be blocked by your network devices.

You can use unicast, directed broadcast, local subnet or Internet transmission methods, or all of the above at the same time.

Freemium

Changelog

New and improved features

    NullReferenceException on client and server when switching the Execution Results view focus interval while a task is running
    Machines deletion from the All Machine view works slowly on MS SQL Server
    Memory leak in the Enumerate Network wizard
    The 'Choose Machines to Import' page is too slow in some import wizards
    Add IP Range operation does not log under certain conditions
    Possible NullReferenceException in the Network view
    Error in the 'Execution Results' View after 'Detailed Log' link is clicked
    Spelling issues in some messages were fixed
    Network operations are freezing in case of several ones running simultaneously
    UI corruption on collection snapshot deletion during the snapshot creation/update
    Database could not be loaded after restart when AD contains entries with duplicate identifiers (computers or organization units)

[close]

https://emcosoftware.com/wake-on-lan

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
EMCO Network Software Scanner 2.0.8.2833
« Antwort #2936 am: 06 Juni, 2020, 09:00 »
The application allows scanning Windows computers in a local network to extract information on applications installed on every PC. The reported information includes the application name, version and vendor, installation date and installation size, as well as other fields displayed in the Windows Programs and Components dialog.

Freeware

Changelog

New and improved features

    The 'Choose Machines to Import' page is too slow in some import wizards
    Add IP Range operation does not log under certain conditions
    Spelling issues in some messages were fixed
    Database could not be loaded after restart when AD contains entries with duplicate identifiers (computers or organization units)

[close]

http://emcosoftware.com/network-software-scanner

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
WifiHistoryView 1.56
« Antwort #2937 am: 10 Juni, 2020, 13:15 »
WifiHistoryView is a simple tool for Windows 10/8/7/Vista that displays the history of connections to wireless networks on your computer. For every event that the computer connected to a wireless network or disconnected from it, the following information is displayed: The date/time that the event occurred, network name (SSID), profile name, network adapter name, BSSID of the router/Access Point, and more...

WifiHistoryView can read the wifi history information from a running system or from external event log file of another computer.

Freeware

Whats new:>>

    Added 'Event Log Filename' column, which displays the event log filename if the event was loaded from archive log files.
    Fixed the /cfg command-line option to load the .cfg file from the current directory if full path is not specified.

http://nirsoft.net/utils/wifi_history_view.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
Lansweeper 8.0.130.20
« Antwort #2938 am: 12 Juni, 2020, 12:38 »
Lansweeper is an automated network discovery and asset management tool which scans all your computers and devices and displays them in an easily accessible web interface.

Whats new:>>

Changed: LAN-5260 The LsAgent client for Windows and the Lansweeper scanning service now connect to a secondary DNS name of the LsAgent relay server when scanning over the Internet

http://www.lansweeper.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189178
  • Ohne Input kein Output
    • DVB-Cube
PingPlotter 5.17.1 Build 7872
« Antwort #2939 am: 13 Juni, 2020, 09:00 »
PingPlotter is a lightweight network troubleshooting, diagnostic and monitoring tool. It can run in the background collecting data while you continue to run applications and then allow you to quickly look at the data in an intuitive graphical format when you experience problems (reduced call quality for VoIP, slowdowns or disconnects with applications, etc.).

Changelog

Improvements

    When starting a trace with an IP address, PingPlotter now automatically attempts to resolve a DNS name
    Improved some error messages in the Web Interface to give better information
    Improved the load speed of timegraphs on LiveShare pages
    Added the ability to not use the lowest Windows default timer resolution for PingPlotter

Fixes

    Fixed a number of "null reference" and "object reference" errors that occurred in a variety of situations
    Fixed sorting of Agent, Settings, and Notes column in the Web Interface
    Fixed a bug that would stop live-rendering of the Web Interface when changing root authentication preferences
    Fixed a bug in the installer where not running VBScript would cause a full install to fail
    Fixed a number of minor LiveShare bugs
    Fixed a situation where LiveShare would not live update
    Fixed a situation that would cause LiveShare page styling not to load correctly
    Fixed a "Sequence contains no elements" bug in Sidekick that would prevent it from starting traces correctly in some situations

Known Issues

    When viewing history data within the Web Interface, the route/trace-grid data does not always update with the current Focus

[close]

http://www.pingman.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )