The Dude will automatically scan all devices within specified subnets, draw, and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.
The Dude network monitor is an application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.
License: Freeware
Changelog
7.15rc1
!) system - added support for AMPERE (R) and ARM64 CHR installations (new ARM64 CHR image available);
*) bgp - added initial vpnv6 support;
*) bgp - correctly synchronize input.accept-nlri address list;
*) bgp - fixed selecting local.default-address from wrong VRF;
*) bgp - use IPv6 as default address-family for IPv6 sessions;
*) bridge - added error message if MLAG peer-port is configured with "mlag-id";
*) bridge - added MLAG peer-port events to logs;
*) bridge - added MVRP support;
*) bridge - do not allow multiple bonds with same "mlag-id";
*) bridge - use default "edge=auto" for dynamically bridged interfaces (PPP, VPLS, WDS);
*) certificate - allow replacing certificate with internal import;
*) certificate - delete certificate related files automatically from storage after import;
*) console - added "byte-array" option to ":convert" command;
*) console - added "rows" property for sniffer quick mode;
*) console - added link from "/iot/lora" to "/lora";
*) console - covert spaces, CR, LF in ":convert to=url" command;
*) console - fixed bogus console ports on ARM64 devices (introduced in v7.15beta6);
*) console - improved stability;
*) defconf - fixed unknown topics in log messages;
*) defconf - minor configuration script updates;
*) dhcpv4-relay - added VRF support;
*) discovery - added LLDP MAC/PHY Configuration/Status TLV support;
*) discovery - always send LLDP MED Power TLV if MED was received;
*) disk - improved support for file systems with non-ascii characters in file names;
*) disk - improved system stability;
*) disk - the "scan" command will now detect and include USB drives that were previously ejected;
*) dns - added VRF support;
*) fetch - added "idle-timeout" parameter;
*) file - avoid refreshing whole file system during file modification;
*) file - improved external storage detection;
*) install - cdrom and hdd install images contain additional packages that can be interactively selected;
*) lora - removed LoRa WinBox and console functionality duplication (moved to IoT package since v7.11);
*) lte - added "at-chat" support for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
*) lte - added support for concatenated AT commands in "modem-init" string;
*) lte - added support to set "modem-init" string for "dialer-less" modems;
*) lte - dropped support for R11e-LTE-US FOTA firmware update;
*) media - added support for DLNA;
*) ovpn - fixed minor typo in error message;
*) poe-out - added LLDP power management support for devices with single PoE-out port;
*) poe-out - moved "PoE LLDP" property from "/interface/ethernet/poe" to "/ip/neighbor/discovery-settings" and enable it by default;
*) ppp - added "enable-ipv6-accounting" option under PPP AAA menu (CLI only);
*) ppp - added addition support to monitor modem registration state, RSRP, RSRQ, SINR, PCI, CellID for BG77 modem;
*) ppp - allow underscores in domain names;
*) ptp - added PTP support for CCR2116 device;
*) qos-hw - added "profile" and "map" support for CPU port;
*) qos-hw - added per-queue traffic shapers (CLI only);
*) qos-hw - added Priority Flow Control for compatible switches (CLI only);
*) qos-hw - replaced buffer with bytes in QoS monitor;
*) queue - improved system stability (introduced in v7.6);
*) route - do not redistribute loopback address as connected route;
*) route - rework of route attributes;
*) sfp - added "100M-baseFX" link mode support for compatible devices;
*) smb - added logs for share connection requests;
*) smb - do not allow setting empty "comment" or "domain" properties;
*) snmp - added missing PoE-out status codes to MIKROTIK-MIB;
*) snmp - added new "mtxrOpticalVendorSerial" OID to MIKROTIK-MIB;
*) ssh - fixed bogus output;
*) sstp - added SNI support;
*) switch - added support for RSPAN mirroring on 98DXxxxx switches;
*) system - general work on optimizing the size of RouterOS packages;
*) vlan - limit "vlan-id" range from 1-4095 to 1-4094;
*) webfig - show inherited properties for wifi interfaces;
*) wifi-qcom - added configuration.distance setting to enable operation over multi-kilometer distances;
*) wifi-qcom - updated driver;
*) wifi-qcom-ac - fix interfaces getting stuck in "stopping" state after radar detection (introduced in v7.15beta9);
*) winbox - added "FT Preserve VLAN ID" setting under "WiFi/Configuration/FT" menu;
*) winbox - added drop down menu for "User" property when importing SSH key under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus;
*) winbox - use correct values for "Jump Target" property under "IPv6/Firewall/Filter Rules" menu;
*) x86 - fixed VLAN tagged packet transmit for ice driver;
7.14.3
*) bgp - correctly synchronize input.accept-nlri address list;
*) bridge - use default "edge=auto" for dynamically bridged interfaces (PPP, VPLS, WDS);
*) disk - improved system stability;
*) fetch - fixed slow throughput due to "raw" logging which occurred even when not listening to the topic (introduced in v7.13);
*) queue - improved system stability (introduced in v7.6);
*) wifi-qcom - added configuration.distance setting to enable operation over multi-kilometer distances (CLI only);
Neueste Beiträge
