Autor Thema: Videoüberwachungssoftware  (Gelesen 26928 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 20.11.5 Final
« Antwort #345 am: 10 November, 2020, 20:30 »
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

    New edition: for a limited time licenses for a new mode – Xeoma Starter – are available for purchase! Xeoma Starter is a hybrid of the Free edition and Xeoma Lite taking the best of the two: affordability, remote access, unlimited view, no watermarks or adds or donation requests, etc. Works on virtual machines. The edition will be the perfect choice for small CCTV systems, either for home or commercial video surveillance scenarios – for example, in food trucks and coffee vans, in flower shops or embedded into ATMs. Spend less – get more with Xeoma Starter. Details here
    Text Recognition: added new Additional module “Text Recognition”. It can recognize digits and words in the camera’s sight, save information to reports, and react upon detecting a pre-set number of text. Perfect for scanning surroundings for advertisement signs or for recognition of license plates from unsupported countries. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Modbus Controllers: added new Additional module “Modbus Controllers”. It can receive commands from controllers that work through the Modbus protocol, and trigger various pre-set reactions in Xeoma. This is a very popular type of controllers used in automation systems, smart homes, traffic lights equipment, etc. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Social Distance: a new feature called “Social Distance” has been added to the “Crowd Detector” Additional module. Thanks to this option, the module can automatically track whether a given social distance is observed between people in camera sight. Setting up this feature is simple: the allowed distance is set by a line in the module itself. This feature will be useful in any public places to automatically track compliance with the recommendations stopping the spread of the coronavirus epidemic. This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Improved ANPR (Additional feature): more countries have been added in the ANPR module into the option to recognize license plates with our own Additional tool. The previously available CIS countries are now complemented with the USA and Canada. Recognition for Chinese license plates has been added too but it works only under Intel 64 processors.
    Additional module: improved algorithms for the “Face Detector (Emotions)” module. The accuracy of determining emotions (surprise, happiness, anger, disgust, fear, or neutrality) is now significantly higher.
    Added new module “Mobile Notifications” that allows to receive notifications in mobile devices running iOS (iPhone, iPad) or Android. The advantage of the new module is that it doesn’t require the app to be running in your Android/iOS device to be able to notify you of the alerts (unlike the simpler module for mobile notifications “Client Window Pop-Up” that requires the app to be always running to push alerts). With the new module you will see alerts from selected servers as iPhone’s, iPad’s standard notifications – on the lock screen, in the Banners area, or in the Notification Center.
    For Android this module will now be used instead of the now-discontinued “Client Window Pop-Up” module. Mobile notifications in Android can appear in their usual form: as an icon in status bar, as a more explicit notification in the notification drawer, as a floating window over other apps (heads-up notification) in unlocked phone (ringtones and vibration for Android version 7.1 and lower), as notifications on the secure lock screen, or as a colored “notification badge” (a “notification dot”) on the app launcher icon.
    The module is available in Xeoma Standard and Xeoma Pro editions.
    PRO: improved work with active directories LDAP in the Users dialog. Now it features the ability to specify not just LDAP user groups, but also subgroups.
    PRO: added ability to customize joystick control buttons. When the joystick is “seen” in the system with Xeoma, a corresponding option will appear in the “Layouts” menu (click the “Window” icon in the bottom panel) where you can set associations between the joystick’s buttons and actions in Xeoma.
    PRO: in the ANPR module we have added the ability to use the “local” version of the Platerecognizer utility (i.e.working on the same machine), as an alternative to the previously added “cloud” version of the utility.
    PRO: improved algorithms for the “Face Recognition” module (“Statistical Analysis” option). Thanks to new modifications of the module, the accuracy of face detection and recognition has been increased drastically.
    PRO: added support for the NO_LOW_RELIABILITY flag to the “ANPR” module for the option of recognition using the iANPR utility. This flag is designed to reduce false positives and is used in a combination of recognition methods 2 and 3.
    PRO: added support for RTSP Broadcasting module under ARMv8.
    PRO: added a JSON API command to start the search for cameras on the server.
    PRO: added a JSON API command to add camera chains with a pre-set template, and set user access rights to them straight away.
    PRO: added a JSON API command to get the camera state.
    Xeoma Pro Your Cloud: added the ability to use separate ports for the web admin panel and for the “HTTP Receiver”, “HTTP Switch”, “HTTP Marking” modules.
    Xeoma Lite: added the ability to work on virtual machines.
    Enabled the “Screen Capture” module for Mac OSX.
    “Preview and Archive”: added more values ​​to the “Leave free disk space” setting.
    “Problems Detector”: added the ability to work in combination with filter modules (for example, with the “Scheduler”).
    “Problems Detector”: improved detection of problems like “Image is not refreshed” and “No camera stream (video or audio) entirely”.
    Added the ability to disable automatic shutdown of a camera. Now you can choose whether you want to stop getting a video stream from a not currently viewed camera with just a “Preview” module in the chain (no filters used) or if you’d like to continue receiving it.
    “Web Server”: added the ability to specify and use separate ports for different “Web Server” modules even on the same server.
    Xeoma Pro Your Cloud: fixed disabling of an “empty” account (an account in which no cameras have been added yet) when a camera search is launched via the web interface.
    Fixed export of short intervals from h264/h265 archives.
    Fixed possible server freeze under Linux when the Repeater service gets enabled (possibly repeated with an unstable Internet connection).
    Fixed the PTZ presets issue with the “Megapixel IP” camera brand.
    “Universal camera”: fixed false error message “Invalid URL” appearing in the module settings.
    Layouts: fixed the issue where the latest opened Page has not been saved on the client. The issue appeared when “Custom order of cameras” option was used.
    “SMS Sender”: fixed problem with sending SMS (text messages) to several numbers at once when using the Clickatell service.
    Android: added the “Switch to the free mode” option in the Main Menu.
    Fixed freezes when restoring old settings via the “Restore settings” menu option.
    Improved auto-search for Xeoma servers in the local network that are listed in the Connection Dialog.
    Fixed a possible crash after installation of Xeoma under Linux.
    Xeoma Pro Your Cloud: fixed slow launch of the server part.
    Xeoma Pro Your Cloud: fixed occasional crash.
    Improved work of the “Camera ONVIF settings” option for when connection is made under a user, not administrator.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Home Security Camera 6.3
« Antwort #346 am: 16 November, 2020, 10:00 »
Free software for video surveillance. You no longer need to pay anything to the cloud service for video surveillance! The minimum delay is only 1 - 2 seconds when broadcasting from an IP camera

Freeware

http://free-video-surveillance.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.12
« Antwort #347 am: 18 November, 2020, 12:00 »
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Removed Motion vs. Continuous REC option from Camera Basic Settings because that can be configured with the REC toolbar button
    Added support for TP-Link NC2XX, NC4XX and Tapo cloud cameras
    Some smtp servers don't say ESMTP in the greetings even if they support it; for this reason we now force EHLO when user credentials are provided (thanks to Hajo Ottenbacher for researching that)
    Trim leading/trailing spaces for entered donation email address

[close]

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 20.11.30 Beta
« Antwort #348 am: 30 November, 2020, 20:00 »
Changelog

    Improved Trial edition of Xeoma: time between settings resets is now 8 hours instead of just 4 as it was before. Now you will have more time to test Xeoma and its more than 100 features. Don’t forget that you can re-use Trial edition as many times as you’d need. Read more about Xeoma editions
    Formerly added as an Additional module “Move to PTZ preset” is moved to Xeoma Pro edition and now available with any Xeoma Pro license, not as an Additional module.
    Formerly added as Additional modules “Camera Embedded Detectors” and “GPIO” are now available in Xeoma Standard and Xeoma Pro editions, not as Additional modules.
    New Additional module called “Slip and Fall Detector” has been added that is based on neural networks and able to detect when people in the camera view slip and/or fall. This feature will be useful in health and patient care organizations, especially in work with elderly people, as well as in city surveillance for instant reaction to accidents (including falling off a chair or a bed). This module is purchased separately and activated over Xeoma Standard or Xeoma Pro modes. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    New module: A new module called “Streaming to Youtube” has been added. Use it to push a camera feed to your Youtube channel as a live broadcast. Xeoma’s Youtube streaming will be a perfect way to build trust within businesses that have traditionally been stained with myths and fears like elderly care, pet hotels, or fast food and small HoReCa establishments. Besides, live streaming from your workshop will help people get interested and get to know more about the process of your craft. Moreover, it’s also an easy workaround for when remote view of camera video stream is needed but there’s no public IP address in there. This module will be available in Xeoma Standard and Xeoma Pro editions. Read more about the module
    Improved Additional module “Modbus Controllers”: an option has been added to push signal to all of the chain’s split module lines, not just one as previously, upon receiving a trigger from an input port. Read more about the module.
    Improved Additional module “Text Recognition”. Now recognition of digits and detection of words and numbers works even more efficiently. Read more about the module
    Improved Additional module “Vehicle Speed Detector”: an adjustment factor has been added to its settings to compensate for when the speed meter appliance is known to display a speed value that differs from the real one. This correction factor can be a coefficient (for example, enter 0.9 to decrease the value by 10%) or a plus/minus value to add or deduct a certain number (for example, 15).
    Improved Additional module “ANPR”: Jordan license plates are now successfully recognized in Xeoma and this country is included into the pack of countries available with the Additional module. Do you need another country? Let us know!
    PRO: The “RTSP Broadcasting” module now features an option to broadcast H264 stream in the same format without re-encoding.
    Console: added support for more separators when activating several license codes at once. Now you can separate several serial numbers with a comma, point and even a space.
    The “HTTP Request Sender” module now supports the %REPORT% macro to get information from the “Problems Detector” module.
    Fixed issue with using a local license server for activation of a license or licenses for a server running in a virtual machine.
    Fixed occasional issue where the person that Face Recognition module was trained for couldn’t be selected.
    Fixed uneven deletion of older recordings after an archive reindexing
    Fixed issues with CUDA hardware acceleration: restarts of decoding for video streams with audio, and color correction for decoded videos.
    Fixed absence of webRTC archives in web interface for cameras that have the option ‘Transcoding on Xeoma side for WebRTC broadcasting’ ticked.
    Failover: improved display of list of the to-be-backed up servers. The list is now updated regularly.
    Reduced the size of a cache file for archive recordings, optimized work with the file.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.13
« Antwort #349 am: 04 Januar, 2021, 19:00 »
Whats new:>>

    In bottom toolbar re-added Camera Settings button and always pop-up a menu for all buttons with an arrow added F1 key for "Online Help", F3 key for "View RECs in Web Browser" and F4 key for "View RECs in File Explorer"
    Added support for Escam

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.14
« Antwort #350 am: 05 Januar, 2021, 10:00 »
Whats new:>>

Updated instructions on application background

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.15
« Antwort #351 am: 16 Februar, 2021, 18:00 »
Whats new

- The web interface trash button is now definitively deleting the
  recordings instead of renaming them to .recycled
- Uninstaller has got a "Keep the settings for later use" checkbox
- Limit the maximum number of encoding threads to 16 as H.264 can have
  problems above that count

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 21.3.4
« Antwort #352 am: 22 März, 2021, 20:00 »
Changelog

    Eye Tracking:

    New Additional module “Eye Tracking” has been added. This module is used to track what people in camera’s sight are looking at. This can be successfully utilized in various spheres including psychology research and neuromarketing.

    Parking Spots:

    New Additional module “Parking Spots” has been added. This module is used to automatically determine and update the status (empty/occupied) of parking spaces in a parking lot. The module can also be used for other objects types, for example, for attendance in offices, statistics in cinema, etc. Read more

    Face Recognition:

    Frame that appears around the face of a recognized person and their name are now overlaid on screenshots that you take from the Xeoma interface using the “Screenshot” option.
    Improved the accuracy of face recognition for both “Statistical Analysis” and “Artificial Intelligence” methods of recognition by adding an option to the module settings to also analyze posture of the human body in camera’s sight. This helps to determine the location of a person’s face more accurately. Available for limited range of processors. See details here

    PTZ Tracking:

    Added the option to use a PTZ preset as the initial position of the camera, to which it returns after finishing tracking an object. To use it, rotate the camera to the desired position, make a preset in that position, and use it in PTZ Tracking settings as a start position (or use one of camera’s existing presets).
    Added support for hardware license keys in ARM devices. Your USB hardware key with a current Xeoma license will be detected automatically in the new version in devices with ARMv7 or ARMv8 architecture.

    PRO:

    New option to rebroadcast the stream without conversion has been added to the “RTSP Broadcasting” module. With its help Xeoma video surveillance software will broadcast the h264(h265) camera stream in the same format thus not inflicting additional CPU load.
    a new function to check availability of the specified port has been added to the “RTSP Broadcasting” module. If the specified port is already taken, Xeoma video surveillance software will have a warning about that now.
    A new opportunity to input the final URL to access the broadcast stream with has been added to the “RTSP Broadcasting” module. Find it in the module’s settings.

    JSON API:

    A new command to get statistics on archives recording (“archivestatistic=”) has been added to Xeoma’s JSON API.
    New commands for working with archive’s undeletable intervals (“markasundeletable=”, “unmarkasundeletable=” etc.) have been added to Xeoma’s JSON API.
    A new option to specify a specific subnetwork to run the search for cameras in (“addr=NNN.NNN.NNN.NNN”) has been added to Xeoma’s JSON API.
    Fixed deactivation of JSON API when all WebServer modules are removed from Xeoma.
    Multi-server mode: support for change of pages number and their display with the help of the PreviewConfiguration file has been added for the multi-server connection too.
    Added new option to control focus of cameras with support for ONVIF PTZ. Xeoma’s PTZ control now has two more buttons for zoom focus in or out for that purpose.
    Universal Camera: a new option “Use the server’s system time to generate timestamps for frames (use in case of archive mistiming issues)” has been added to the module’s settings. It will help resolve some of the archive recording issues. See more here
    Added opportunity to change the default chain sample that all new cameras are added with in Xeoma. Specify a new default chain in the DefaultChain.txt file and place it to the ChainTemplates folder in Xeoma’s folder.

    Web Server:

    More exact time with accuracy up to seconds can now be specified for export of archives from the web interface.
    Fixed memory leaks in Docker when the Web Server module is used.
    Added a new “Multi-removal” icon to remove several camera chains at one time. Find it in the lower icons panel in the Multi-Camera View Window.

    HTTP Switcher:

    Added opportunity to use user profile credentials for working with the “HTTP Switcher” module that has the authorization option enabled.

    HTTP Request Sender:

    Now you can use POST requests with your custom headers.

    LDAP:

    Fixed import of users from an LDAP server when entries have ‘person’ name as an identificator instead of ‘user’.
    Fixed the CPU burst issue upon entering any module’s settings.
    Fixed the false “Problems Detector” warnings about camera not working when the camera is disabled due to the ‘Auto-disable’ function.
    Fixed memory leak that would appear when layout pages were edited in systems with many cameras and users.
    Fixed occasional crash in devices under Linux and Mac OS when the “Screen Capture” module was used.
    Fixed issues that used to make it impossible to use CUDA hardware acceleration in Linux machines.

    Sending email:

    Fixed issue when messages were not sent if one or several of listed email addresses were invalid or misspelled. This new version of Xeoma will send messages to all the rest of listed email addresses.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.16
« Antwort #353 am: 01 April, 2021, 21:00 »
Changelog

    Web interface always displays 12 video thumbs per page as responsive 4x3, 3x4, 2x6, 1x12 grids
    Web interface supports now passing the credentials as parameters like: http://CONTACAM-PC:PORT/CAMERA_NAME/poll.php?username=USER&password=PW
    The rec dot overlay is now displayed with an outline border and the saving progress is shown with a small horizontal bar instead of text
    Added support for Ezviz
    UDP Multicast transport possibility for RTSP streams
    Enabled Address Space Layout Randomization (ASLR) with /DYNAMICBASE

[close]

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.17
« Antwort #354 am: 19 April, 2021, 12:00 »
Whats new:>>

- We have got a code signing certificate
- Updated to ffmpeg 3.4.8

https://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 21.4.2
« Antwort #355 am: 27 April, 2021, 19:00 »
Changelog

    Face recognition: improved algorithms of the intellectual module “Face recognition” to allow better recognition when training is conducted with faces at a maximum range (distance).
    FTP Receiver: improved module’s operation with Dahua cameras. We fixed the issue with low FPS when working with the Dahua cameras through FTP.
    Marking: added integration of the “Marking” module to work with the Ublox neo-7m GPS module. Now you can receive coordinates in Xeoma from this GPS module.
    Local license server: added support for rented licenses and demo/trial licenses. Now you can activate these licenses using the ‘local license server’ activation option.
    PTZ control: added a new icon in the PTZ control menu to use additional features that a camera provides through ONVIF. These can be turning on/off IR-illumination of the camera or a camera wiper, etc. The new icon can be found in the PTZ control menu available in the Single Camera View window.
    The “HTTP Switcher” module’s icon is now available on the main page of Xeoma’s web browser interface – for webRTC streams as well. This module can be used for integration with various devices like gate barriers, sound alarms, smoke detectors etc.
    Rebranding/Customization: fixed the issue with Xeoma name replacement on Windows. ‘Xeoma’ will be replaced in firewall rules with ‘Your Product Name’ after rebranding now.
    Web interface: fixed the issue with displaying webRTC video in Firefox browser.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.9.18
« Antwort #356 am: 08 Juni, 2021, 23:30 »
Whats new:>>

- Fast video saving option (be aware that this new setting will generate
  bigger files)
- The RTSP stream decoder with UDP transport is now more fault tolerant
- Daily summary video frame interval can now have any value, before it
  had to be bigger or equal to the live snapshot rate
- Changed ffmpeg build toolchain from mingw to msvc

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 21.6.4 Beta
« Antwort #357 am: 10 Juni, 2021, 10:00 »
Changelog

    All improvements from Xeoma Beta 21.5.31
    Eliminated delay in sending emails with the “Email Sending” module: now when it’s time to send the message it is sent immediately.
    Fixed the syslog error “current command vanished” after Xeoma installation in Debian.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 21.6.4
« Antwort #358 am: 16 Juni, 2021, 11:00 »
Changelog

    360° Surround View: new Additional module “360° Surround View” has been added. This module is used to get an all-round view by combining streams from 4 live cameras. Can be used in vehicles or any size or form. Read more
    Parking Spots: the “Parking Spots” module now has an embedded object recognition algorithms to detect cars. Now you don’t need an additional module (ANPR or Object Recognizer) for that as you did before.
    Face Detector (Emotions): added a new %EMOTIONS% macro. Use it in HTTP Request Sender, Email Sending or App Runner module to get dynamic information on the recognized emotions, as well as its accuracy percentage and time of recognition.
    Camera Embedded Detector: fixed multiple reconnection of the “Camera Embedded Detector” module to a camera.
    Xeoma Pro: Face Recognition: fixed crash at using the new posture analysis feature that is used for more accurate, better search for human faces in camera sight.
    Xeoma Pro You Cloud: a subscriber whose account is suspended due to absence of cameras can now log in to their account anyway.
    Xeoma Pro You Cloud: now license limits are not spent on subscribers whose accounts are suspended due to absence of cameras. Such accounts are not taking up camera count.
    Multi-server mode: now set up pages do not disappear when a server or servers from the connection list are unavailable, or when a new server is added.
    Mobile Notifications: added a new option that, when selected, sends a photo of the event from the camera along with the event time/date in a push notification.
    ANPR: optimized disk load that the third-party openALPR.
    ANPR: fixed crash when using the Xeoma’s Improved license plate recognition package for Jordan license plates.
    LDAP: the LDAP server settings dialog in Main menu – Remote access – Users – LDAP) now offers the opportunity to choose objectClass for users and groups of users for more detailed control over requests in LDAP synchronization.
    WebApi: added error log for export web commands.
    Hardware keys: now you can add licenses to a hardware key even if you are using a “too new” Xeoma version that the hardware key’s original licenses do not support.
    The Problem Detector module’s section for checking availability of a network resource is now complemented with the ping tool for Linux and Mac OSX (previously available only for Windows).
    The Motion Detector’s option ‘ignore motion shorter than’ now has the value of 1.5 secs.
    Pages: now you can select cameras for a new Page from a list (as opposed to selection of cameras by their preview images). This will be most convenient for users of large-scale systems with hundreds of cameras.
    Universal Camera: improved changing camera settings through ONVIF. Now the ONVIF settings change dialog has updated information about camera bitrate even if it was changed in camera’s web admin page, outside of Xeoma.
    Fixed absence of webrtc live view option in some cases of viewing through Xeoma’s web interface.
    Fixed disappearance of configured user profiles after problems with the license.
    Fixed issue with USB cameras taking place of each other after restarting the server (when using multiple USB cameras at the same time).
    Eliminated delay in sending emails with the “Email Sending” module: now when it’s time to send the message it is sent immediately.
    Fixed the syslog error “current command vanished” after Xeoma installation in Debian.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189137
  • Ohne Input kein Output
    • DVB-Cube
Netcam Studio 1.9.5.0
« Antwort #359 am: 24 Juni, 2021, 19:00 »
Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

http://www.netcamstudio.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )