Thema: Videoüberwachungssoftware

[SiLæncer]

A straightforward video surveillance software with motion detection and video recording functions for Close-circuit security cameras.

Freeware

https://www.sc-software.net/products/all/security-camera-viewer.html

[SiLæncer]

ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- The daily summary video creation is now configurable under
  Camera Basic Settings
- Fixed download problems for daily summary videos
- Increased the download performance of thumbnails and videos
- Updated the "Network / IP Camera" dialog to show also the assigned
  camera name in the "Camera IP or Address" drop down list
- Support Sumpple RTSP cameras

[close]

http://www.contaware.com/

[SiLæncer]

iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Bug fixes
Fix issue with channel swap when using VLC 3+
Update ffmpeg version

http://www.ispyconnect.com/

[SiLæncer]

Whats new: >>

Rollback ffmpeg update
Updated translations and ptz

http://www.ispyconnect.com/

[SiLæncer]

Whats new:>>

- In web interface showing start time if hovering over small videos
- Reload web page with no parameters if today selected
- Small fixes

http://www.contaware.com/

[SiLæncer]

Changelog

    Better support for high contrast themes
    Frame Annotation possibility with the new toolbar button
    More intuitive detection zones/mask toolbar button. Single zones
    changes are now saved immediately
    Configurable frame interval for the daily summary video
    Removed the rudimentary scheduler in favour of a more flexible way
    to control ContaCam through the Windows Task Scheduler
    Added example buttons for typical external commands
    Web interface multiple selection deletion(sponsored by Grün Stadt Zürich)
    The web interface video player was enhanced with a 2.0x play speed
    In web interface we have now only one camera source obscure button (like in ContaCam program)
    Updated installer with an improved closing logic for Apache server
    Added a new Generic IP camera entry
    Fixed mjpeg support for the MotionEyeOS camera (thanks to Dave Smith for reporting the problem and helping find the bug)

[close]

http://www.contaware.com/

[SiLæncer]

Whats new:>>

- Fixed a bug which prevented the Camera Basic Setting dialog
  to set the correct sensitivity for the chosen usage

http://www.contaware.com/

[SiLæncer]

Whats new:>>

- New CAMERA.bat batch file to control the camera source on/off state
- Daily summary video will not record black frames when source is off
- Added a recording start picture saving checkbox
- Http multipart parser is more fault tolerant
  (fixes VLC multipart streaming)
- New %name% command execution variable containing the camera name
- Support Floureon, JideTech and Wyze RTSP cameras

http://www.contaware.com/

[SiLæncer]

Changelog

    Additional module: added new module “Sports Tracking”. This module is used for recognition and automated PTZ tracking of a ball in various sport games. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Gender Recognition“. This module is based on Artificial Intelligence and enables automatic recognition of a person’s gender, and reaction to either male, female, or both genders. Ideal for retail stores where promo ads or notifications can be adjusted based on a visitor’s gender for higher sales rates. You can select to which gender the system will react, and set the desired accuracy level to get rid of episodes where the system is less sure of recognition quality. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Color Recognition”. This module is triggered when it detects the selected color in the specified area in real time. Choose a color for detection from the suggested basic ones or input a color in the RGB or HSV color scheme. Use the Sensitivity threshold slider to allow detection of undertones of a selected range. Paint the area where color should be monitored in red with a brush. Areas not marked in red will be ignored when searching for colors. Select the “Analyze only the changing areas” to ignore static objects in camera image (the module will look for moving objects only then). You will need a “Motion Detector” module in the chain before module if you want to use this feature. The module is designed for independent work to intercept an object by a color, or to work in conjunction with other modules like License Plate Recognizer, for example, detecting violations of traffic rules in combination with a traffic light (detection of drivers ignoring the red signal). This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional module: added new module “Crowd detector”. This module is based on Artificial Intelligence networks and can count people’s heads and detect if the number is bigger or smaller than needed (detect people crowding), and cause a pre-set reaction. It can also be used for passengers count in a public transportation enclosure like subway carriage, bus, tram, train, etc. You can select how many people should be there in the camera’s field of view to trigger the module. The module needs additional resources to work that will be downloaded automatically. This module is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    Additional license: new countries with improved accuracy of license plate identification have been added for the “ANPR” module. These countries are: Armenia, Belarus, Georgia, Uzbekistan, Russia and Kazakhstan. For the module to work, additional components need to be downloaded (done automatically). License for this newly added functionality is purchased separately and activated on top of Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma for 1 hour, then reconfiguration is required.
    The previously added additional module “Object Recognition” does not need the “Object Detector” module to work any more; the module works independently now.
    New types of objects added to the additional module “Object recognition”. Now the module can recognize boats, buses, sport balls, trains, trucks.
    Additional module “Object Recognition” now offers possibility to select recognition interval, which allows to reduce the load on weak processors, while losing an insignificant part of possible episodes with this object type in the frame.
    Additional module “Object Recognition” now offers the possibility to select the desired recognition accuracy level for each type of object separately. Now you can flexibly set what percentage of recognition accuracy suits you for type of object. For example, when you need more accuracy for recognition of cars of various form-factors, and lower accuracy is enough for the lower-priority task of recognizing people.
    Additional module “QR Code Recognition” now can recognize bar codes of all known formats (code-128, code-39, code-93, EAN-13, EAN-8, ITF, PDF-417, RSS expanded and others), in addition to QR codes.
    “Face Recognition“: new option “Auto-learning by found faces” added for recognition using the artificial intelligence option. This functionality allows you to automatically train the program to include detected people in a particular group by frequency of detection (for example, employees, loyal visitors, new guests, etc.).
    Additional module “Move to PTZ preset” now has the possibility to setup the tour (patrol) mode for ONVIF cameras that support touring, directly from the module’s interface.
    Additional module “Move to PTZ preset” now offers the possibility to select the module to which the signal is transmitted when the selected preset is triggered is added. Thus, in one module “Move to PTZ preset”, you can configure various presets and determine to which of the following modules the signal from each will be transmitted.
    PRO: added detection of speed limit violation. The combination of the new PRO modules “ANPR Speed Sender” and “ANPR Speed ​​Receiver” calculates the time that a vehicle takes to travel the distance between two virtual points, and if it’s lower than a set time, the module is triggered. More details
    PRO: the “ANPR” module now offers visualization of the license plate location on preview. With this feature it will be more convenient to configure the module to work together with other modules – for example, with the “Cross-Line Detector” or “PTZ Tracking”.
    PRO: the “ANPR Sending to FTP” module now offers the ability to choose what pictures to send (either a frame with a machine, or a frame with a license plate, or both), whether to send this data in archive or as separate files, and also to select the sending/saving interval.
    PRO: Added support for USB joysticks for PTZ control (Windows only).
    Added support for working with GlobalSat GPS modules (in modules “Marking” and “ANPR Speed Sender”).
    Universal camera: added the ability to select a PTZ (pan-tilt-zoom) profile. This functionality is needed for operation of several PTZ cameras connected via NVR.
    Universal camera: added the ability to configure ONVIF camera streams directly from the Xeoma interface. Now you can change the resolution, stream type, frames-per-second rate, brightness, contrast, sharpness, and other parameters of the streams that the ONVIF camera allows to change through the ONVIF protocols, right from the “Universal Camera” dialog. All settings are available for the ONVIF cameras automatically.
    Universal camera: added the ability to limit FPS (frames per second rate) of a USB camera’s video stream (previously the FPS option could only be selected in conjunction with resolution).
    Added the ability to import/export customized tabs for transferring them to other clients.
    Added the ability to synchronize the ONVIF cameras time with the server’s time. With this option, your ONVIF cameras connected to Xeoma will be automatically reconfigured to the server’s system time.
    The “Display only active cameras” option now has the ability to select the time the cameras are displayed for (5, 10, 30 seconds, 1, 2, 5 minutes).
    Users Dialog: added option to allow or prohibit users listening to sound from cameras.
    Users Dialog: added option to allow or prohibit users viewing interactive maps eMap.
    The “Active licenses” information (Main menu – Information – Active Licenses) now has the ability to remove previously activated licenses so that you could delete mistakenly activated licenses and transfer them to other equipment. This is especially important for virtual machines.
    Added the option for simultaneous export of archives that are viewed in the multi-archive viewing mode.
    Added new “programdir [DirPath]” program startup key. Running Xeoma with this key will allow you to change the storage location of the program files without installation.
    Motion Detector: added the “Ignore shadows” option. This functionality allows you to reduce false positives by shadows of various objects.

    Improvements:

    -“Universal camera”: added automatic selection of the “Decoding of key frames” option which allows you to determine the number of key frames in the stream and only reduces them to decode the processor of the server.
    -Added new “-archivecache [DirPath]” console parameter. This parameter allows the system to use a folder for temporary storing of archive recordings files until they are fully recorded. Using this parameter allows to significantly reduce disk fragmentation and therefore the load on it. Useful for a large number of cameras.
    -Optimization of work with massive archive recordings.
    -Optimization of work with a client with a large number of cameras on a weak computer. To maintain performance, the frames-per-second rate is lowered in the Main Window (Multi-Camera View).
    -Faster display of cameras at the first launch or when switching from tab to tab with a large number of cameras

[close]

http://felenasoft.com/

[SiLæncer]

Changelog

- Video saving speed adapts itself to the available system resources
- Optimized small video (animated gif) creation and play time
- Bottom toolbar menus must not cover their own buttons

[close]

http://www.contaware.com/

[SiLæncer]

Netcam Studios is a Client / Server based Network Cameras and Webcams Servers. On top of the basic functionalities of modern video surveillance application, it also offers the following: Runs as Windows service; 100% controlled by web services (JSON, Soap); Motion, Speed and Audio Detection; Synchronization of alerts (Nas, FTP, Cloud); Retrieve external values (JSON, File); Trigger external systems based on rules (HTTP, File, Command); and Stream to HTML 5 Video tag or VLC.

Netcam Studio is intended to replace webcamXP and webcam 7 by Moonware Studios.

http://www.netcamstudio.com/

[SiLæncer]

Security Eye is a free personal surveillance utility that permits you to monitor multiple IP and webcams right from your desktop or laptop. It includes support for over 1200 models of IP cameras and almost all webcams. You can view the video stream simultaneously from 64 different sources. Best of all you have access to live stream viewing via your browser allowing you to watch your home, etc. from wherever you may be.

Set up of Security Eye consists of camera selection by either IP address or manufacturer and model. You can then choose the type of surveillance; motion detection, scheduled, manual, etc. You can also determine alarm types that include local audible, text, and SMS.

Freemium

Whats new:>>

Audio support. Import/export cameras. New languages.

http://security-eye-software.com/

[SiLæncer]

IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freemium

http://www.deskshare.com/

[SiLæncer]

Changelog

    Updated OpenCV to 4.2.0
    Support for Hardware/GPU accelerated recording (Intel, AMD, Nvidia)
    Support for D3DVA11 Hardware/GPU accelerated decoding (Now possible when running as Service)
    Possibility to selected between Constant Frame Rate or Variable Frame Rate (Smaller files, less CPU) recording
    Reduced CPU usage when decoding JPEG/MJPEG streams
    Optimisations in H264 encoding for recording and live streaming
    Improved accuracy of the frame rate limiter
    Improved Bruce-Force detection to protect NCS from attacks
    Fixed some cases of Audio over HTTP which were not supported
    Fixed FTPS upload was not working with self-signed certificates and in some cases
    Fixed an issue with Point-to-Move functionality for PTZ cameras

[close]

http://www.netcamstudio.com/

[SiLæncer]

ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

    Supporting high DPI aware NSIS 3 (Nullsoft Scriptable Install System)
    In case that the camera framerate cannot be reduced there is a saving framerate divider parameter in Camera Advanced Settings dialog (removed the saving speed adaptation logic introduced in 9.9.5)
    Better support for Samsung cameras
    Web interface got a Back to Top button
    Removed Camera Basic Settings toolbar button as this command is already under the Settings menu

[close]

http://www.contaware.com/