Autor Thema: Videoüberwachungssoftware  (Gelesen 26962 mal)

0 Mitglieder und 7 Gäste betrachten dieses Thema.

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.0.3
« Antwort #300 am: 01 Oktober, 2018, 17:00 »
ContaCam is a Security Surveillance and Live Webcam solution for Windows that supports an unlimited number of WDM, VfW, DV and Network cameras.

DONATIONWARE

Changelog

- Updated Tabs and bottom-right popup Message Box fonts
- Merged the "Snapshots as daily history video" usage into the "Motion detection surveillance" usage

[close]

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
iSpy 7.1.6.0
« Antwort #301 am: 13 Oktober, 2018, 11:30 »
iSpy uses your webcams and microphones to detect and record movement or sound and provides security, surveillance, monitoring and alerting services. Any media that is captured is compressed to flash video and made available, securely over the web. iSpy can be setup to run on multiple computers simultaneously. iSpy is free, open-source software, so if you want it to do anything else, please download the source code and customise it to your requirements.

License: Freeware

Whats new: >>

Fix high cpu with saving audio files
Fix issue with opening mp3 files in web browser

http://www.ispyconnect.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Security Camera Viewer 5.2
« Antwort #302 am: 24 Oktober, 2018, 05:00 »
A straightforward video surveillance software with motion detection and video recording functions for Close-circuit security cameras.

Freeware

https://www.sc-software.net/products/all/security-camera-viewer.html

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
iSpy 7.1.7.0
« Antwort #303 am: 25 Oktober, 2018, 18:00 »
Whats new: >>

Add velocity spaces to ONVIF
Updates to local server

http://www.ispyconnect.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
iSpy 7.1.8.0
« Antwort #304 am: 26 Oktober, 2018, 05:30 »
Whats new: >>

Fix high CPU on JPEG feeds
Fix bug with attaching images to emails when camera is not responding

http://www.ispyconnect.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
IP Camera Viewer 4.07
« Antwort #305 am: 06 November, 2018, 19:01 »
IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera to keep an eye on your home, office, parking area or anywhere you need security.

View video from multiple IP cameras directly to your computer. Currently more than 1500 different IP camera models from leading camera manufactures are supported. It includes Axis, Canon, D-Link, Foscam, Panasonic, Mobotix, Pixord, Sony, Toshiba, Vivotek and many more. You can send a request to our technical team if your camera or model is not listed in our application. Virtually all USB cameras work with IP Camera Viewer.

You can control and view up to 4 camera feeds simultaneously. Get a live preview from multiple cameras with this light-weight application. IP Camera Viewer's centralized camera and layout management allows you to view your cameras from multiple remote locations on a single screen. You can change the arrangement and preview layout of the cameras, for your security needs.

Freeware

http://www.deskshare.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.0.5
« Antwort #306 am: 08 November, 2018, 18:00 »
Changelog

- Support additional Generic RTSP devices
- Increased the rtsp/udp receiving buffer size from 1 MB to 10 MB
- Building the application with LARGEADDRESSAWARE set to have up to
  the double of address space
- Added support for flipping video horizontally and vertically
  (rotating by 180° can be achieved by enabling both flips)
- Scheduler is now only for the recordings and not for the
  snapshots (scheduling for the snapshots can be achieved with
  a batch script executed on snapshot)
- Do not revert snapshot thumb size and rate in Camera Basic
  Settings dialog

[close]

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 18.11.21
« Antwort #307 am: 22 November, 2018, 19:00 »
Xeoma Video Surveillance Software is a complete video surveillance solution for both Windows and Linux-based systems and Macintosh computers. It supports an extremely wide variety of digital video cameras including wireless cameras, regular USB web cameras and IP cameras. It is a unique solution in that it provides one of the most user-friendly and intuitive ways of configuring a complete video surveillance system in either the home or the work place.

Freeware

Changelog

Added a new “Object Recognizer” module. The module can automatically classify objects in the camera field of view (person, car, animal, bird, motorcycle, etc.) and respond – or ignore – to selected types of objects. “Object Recognizer” is ideal in environments where there is movement expected in the field of view, and you need the system to respond (or not respond) only to a certain type of object. The module is available for testing only in the trial version of the program.
Added a new “Face Detector (Emotions)” module. The module can automatically recognize human emotions (happiness, fear, neutrality, sadness, etc.) in faces appearing in the camera frame, and display them on the screen, save to a spreadsheet report or send to a third-party program for processing. It can also be used as an alternative to the current Face Detector for detection of faces (but not recognition), or in conjunction with it, for example, to determine the emotions only of known or unknown persons. The module is available for testing only in the trial version of the program.
Xeoma Pro: ANPR. Added the ability to run a search for numbers directly from the log of found license plates.
Xeoma Pro: Added the ability to record multiple audio tracks from several microphones for the same video stream (available for recordings in in the .xem format);
Xeoma Pro: Added the ability to export video with sound recording from several microphones (multi-channel sound) in the exported file.
Xeoma Pro: Added the ability to edit module settings using the JSON API. Now you can change settings of Xeoma modules and manage them from automation systems. Read more
Xeoma Pro: Added presets and automatic patrol for PTZ cameras with support for ONVIF. Now you have the opportunity to set up certain positions (“presets”) for ONVIF-compliant PTZ cameras, and establish a route of a “guard tour”. This way the camera will rotate automatically along the configured “tour”. Watch the video, read the article.
Android: a new client-only app is released. It doesn’t require permissions as the server+client version does. Now you have the choice to download either only a client Xeoma Android app to connect to your remote Xeoma server, or a full (server and client) app in one. Available for download on our site or from Google Play.
Optimized hardware acceleration and increased decoding speed on video cards using CUDA, including support for decoding h265-formats.
Improved rewriting archives for the option “Always leave free space” in the “Preview and Archive” module. Implemented an even removal of all archives by days.
Improved operation of the “Object Detection” module in conjunction with the “Cross-Line Detector” module. Now people walking near each other are detected separately correctly.
Optimized buffering option: the option will be turned off by default for new installations. If you’re updating from an older version where buffering has been enabled, it will stay enabled. Buffering should be enabled when smoother realtime viewing is required. The option can be selected in the “Layouts” menu (setting for client/server) or in the “Universal Camera” module settings (for separate cameras). A higher RAM load and image delay – as compared to image in camera admin page – are to be expected when the option is engaged.
ANPR: Added support for iANPR version 1.793 in ARM versions. Better recognition accuracy and new features for recognition of CIS license plate numbers.
ANPR: Added support for the new openALPR version for Windows. In it, the plates of the following countries are recognized: Argentina, Brazil, China, Indonesia, India, Japan, Thailand, South Africa, Saudi Arabia.
Fixed false triggering of motion detection when the camera switches from day/night mode.
Added the ability to go to the license reset page straight from the program interface.
Added the ability to select the speed of rotation and zoom for PTZ cameras that support ONVIF.
Repeater: improved connection speed, activation, display statistics, and added support for changed port of the Xeoma-server.
Marking: Improved overlaying of custom text (subtitles) in h264/h265 recordings.
Added support for video streams from Verint S1708e and S1808e decoders.
Multi-server mode: added the ability to edit the already added servers. Find this new option in the multi-server mode settings dialog.
Added the -starservice and -stopservice console keys for starting and stopping the Xeoma server that has already been installed in autostart.
Added support for a new version of the library for working with the Arducam camera.
Added black and white mode support for the Arducam camera. Use the parameter FORMAT: [value1, value2].
“HTTP marking”: Fixed a problem with possible loss of parameters when applying the HTTP marking.
“HTTP Requests Sender”: Fixed sending of a test request when clicking the “test” button.
Fixed program activation on new Ubuntu OSes (17.04 and up).
Fixed activation issues and false determination of settings when transferring to a physical machine from a virtual one.
Fixed incorrect display of dates in the calendar when viewing multiple archives at once.
Improved playback of the H264 archive in the browser.
Fixed crash in the “HTTP Switcher” module.
Fixed bug with updating the image in archive when dragging the time scale slider.
Fixed activation error on Linux OS without ifconfig utility.
Removed possible distortions when decoding h265 stream from the camera on the client.
Fixed launch error on devices with Exynos4412 Prime processor.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.0.7
« Antwort #308 am: 27 Dezember, 2018, 19:00 »
Whats new:>>

- The web interface full screen image maintains the aspect ratio (not supported by IE)
- Store the temporary daily summary snapshots in a subfolder
- Removed the possibility to have "snapshot each" under 1 second

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
ContaCam 9.0.9
« Antwort #309 am: 19 Februar, 2019, 05:30 »
Whats new:>>

The web interface full screen live snapshot image can now be configured to either maintain the aspect ratio or to fully stretch. Do not adapt the frame time font size when the DPI changes, this because connecting through RDP can modify the DPI automatically. Possibility to display the system uptime in each frame
Updated internal web server to Apache 2.4.38 and PHP 5.6.40with INVALID_HANDLE_VALUE patch discussed in PHP bug #77580
Apache and PHP both with OpenSSL 1.0.2q)

http://www.contaware.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 19.2.18
« Antwort #310 am: 19 Februar, 2019, 13:30 »
Changelog

Extra module: Added new module “FaceID”. This module recognizes human faces in camera image and compares them to faces from database (a remote LDAP database or a database stored on the same machine). This module only works if connected after the QR Code Recognition or Smart Card Reader modules. QR Code Reader or Smart Card Reader get information about person’s ID and send this meta data to FaceID that searches the database for the person’s face with this information. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “QR Code recognition”. The QR Code Recognition module is a filter module that scans the camera picture for QR code and when finds one, sends the video signal further along the scheme. This module is usually used in chain before the FaceID module which can compare face in camera view with a face of the person identified by that QR code. The module also works with the “Application Runner” module where it can send information about the QR code using the %TEXT% macro. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “SmartHome – RIF+”. This module works with RIF+ automation devices. Various sensors can be connected to the device, and the module can receive their alarms. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “Smart-card reader”. The module receives information about the card holder from Omnikey access card readers and passes it further along the chain to the FaceID module to compare the photo from the database with the face of the person in front of the camera. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. The module also works with the “Application Runner” module where it can send information about the access card using the %TEXT% macro. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Camera-Embedded Detector”. This module can use the built-in detectors and sensors of IP cameras that support the ONVIF protocol, as well as send commands to the camera. With this module in use, you can configure analytics rules in your camera, and stop using Xeoma detectors thus shifting some of the server load to the camera side. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Moving to PTZ preset“. When this module received alarms from previous modules in the chain, it can move a selected camera to a pre-defined position. The camera must support PTZ controls though ONVIF protocol. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Added the ability to search for a person through archive recordings by uploading a photo. The search can be performed in archive recordings of one camera or several at once. To start the search, go to the built-in Xeoma archive viewer’s menu, select the Search by photo option, and upload the photo for search from your device. The function is especially in demand in the “Safe City” systems, in the search for missing or wanted people, as well as in commercial areas when investigating incidents. This feature is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma: the search will yield only one latest incident where this person (face) was detected.
Added search through archive recordings by object types for the previously released Extra module “Object Recognition”. Find this option in the Xeoma Archive Viewer menu. If object visualization is enabled, the recognized objects will also be visualized.
PRO: Added the long-awaited synchronization of archives with the SD card of an IP camera that supports the ONVIF protocol. If the connection with such a camera is interrupted for a while, the recording of events will continue to the camera’s memory card, and after the connection is restored, this missing segment will be downloaded from the camera’s video storage to the Xeoma archive. It works only with ONVIF cameras. Configure this feature in the “Preview and Archive” module settings.
PRO: Added failover (server backup) for the Xeoma Pro Your Cloud mode. Before this improvement you could do that with system tools. Now there’s the built-in Xeoma feature for such “hot” and “cold” servers. See more about Failover here.
PRO: Added LDAP support for devices under ARM architecture. Now all the advantages of active directories can be used on ARM devices like Raspberry, too.
PRO: License Plate Recognition: added the ability to set the number of frames the iANPR utility has to process. If it is not possible to limit the maximum speed of the traffic flow, this new setting, if used properly, can help avoid blurred frames, and thus aid in higher successful number recognition rate.
PRO: Improved search for license plates: now you can run the search through archive recordings for a license number directly from the ANPR log of recognized license plates.
PRO: Xeoma Pro Your Cloud: added the option to limit number of user-created interactive E-Maps.
Added the ability to automatically place active cameras (cameras with triggered detectors) in a separate tab. Try this option in the menu “Layouts” -> “Manage layouts” -> “Larger grid mode” -> “Show only active cameras”. This innovation will allow you to use one of the monitors for displaying streams from cameras where alarm events occurred. The camera disappears from this tab in 10 seconds after the alarm event is finished.
Added long-awaited export of the archive in the timelapse form. Now you can specify the desired speed (frame rate) of the resulting piece before the export starts. This faster playback timelapse effect will help you quickly evaluate what happened outside the Xeoma Archive Viewer. If viewed in the Xeoma’s Archive Viewer, you can use the flexible playback speed to achieve the timelapse effect. This effect is widely popular for visualizing long processes: for monitoring of building erection, or in the scientific fields for watching over plant growth, chemical reactions, etc.
Added digital zoom for moving objects. Now, even if your camera does not have the PTZ (pan-tilt-zoom) functions, you can use the ability to automatically track objects or people in the field of view of the camera. Find this option in Main menu -> “Zoom” -> “Automatic objects tracking”. If there are several objects in the frame, the automatic tracking still works flawlessly and monitors the largest object.
Added the ability to display a high resolution stream when viewing all cameras – including on mobile devices. Turn this smart option on in “Layouts” -> “Client decoding settings” -> “Video decoding on the client side for live preview”) and select the settings that suit you and your device best with the slider below.
Multi-server mode: added the ability to use digital zoom. Now you can zoom in on the parts of a camera image in real-time and in the archive, even if you are connected to several servers at once.
Added the ability to download CSV reports from the server via client connection. Now you can get reports from smart modules wherever you are, even if you are connected to the server remotely. Perfect for verticals where mobility and fast assessing of work results is important; for those who want to have access to information anytime, anywhere.
Problem Detector: Added new camera defocus option. Now the program can automatically notify you when camera is out of focus suddenly. This new feature is a great addition for stand-alone systems that work for months without human supervision.
Added support for cameras that use the PSIA protocol, an ONVIF equivalent, which ensures successful synchronization of devices from different manufacturers within a unified system.
Added export of still pictures in PNG and BMP formats (in addition to previously available JPEG). Now you can export a snapshot of the archive recording in these common formats right from the archive viewer
Added the ability to assign access rights to groups of cameras. Ideal for systems with hundreds of cameras. Now you do not need to manually set the access rights to each camera separately. You can divide cameras into groups on any basis (for example, by their geo location) and assign rights to new and old operators to this or that set of cameras. Look for this option in the Main Menu -> Remote Access -> Users.
Added the ability to copy layouts and tabs from one client to another. Now you can share your tabs and camera order configuration with other users of your video surveillance system. Save it to a file and upload it for any other account through the Layouts menu.
Added the ability to prohibit users to change camera order, leaving the possibility to set camera order only to the administrator. Search for this feature in Main Menu -> Remote Access -> Users.
Increased efficiency of sending JPEG images with the %JPEG% ({JPEG}) macro due to getting rid of unnecessary coding.
Added new archive playback speeds. Now you can view your archives 60 and even 900 times faster. Suitable for systems with a lot of records to watch really quickly.
Added support for two options of overwriting the archive: by calendar days and by actual content. In the first case, the old recordings will be overwritten by new ones, for example, after 7 days have passed since the recording date, even if less recordings were made actually (for example, if motion detection was used). In the second case, the actual filling of the archive will be considered: the records will be overwritten, for example, when there are 7 days-worth of actual records stored.
Added the ability to request test licenses of the program directly from its interface.
Free rebranding: Added the ability to fill in the list of servers for clients to connect to with the <ServersFileName> parameter. Use this option to provide operators with a customized version of Xeoma with a list of servers to connect to already filled-in.
Added the ability to edit created PTZ tours. Learn more about PTZ presets and guard/patrol tours here.
Also, these issues were fixed:
Fixed possible crash when using webrtc in Xeoma Pro Your Cloud.
Fixed problem with recording archives in case of problems with the database.
Fixed possible failure of the client part when CUDA hardware acceleration is engaged.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 19.3.7 Beta
« Antwort #311 am: 07 März, 2019, 17:00 »
Changelog

Extra module: Added new module “FaceID”. This module recognizes human faces in camera image and compares them to faces from database (a remote LDAP database or a database stored on the same machine). This module only works if connected after the QR Code Recognition or Smart Card Reader modules. QR Code Reader or Smart Card Reader get information about person’s ID and send this meta data to FaceID that searches the database for the person’s face with this information. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “QR Code recognition”. The QR Code Recognition module is a filter module that scans the camera picture for QR code and when finds one, sends the video signal further along the scheme. This module is usually used in chain before the FaceID module which can compare face in camera view with a face of the person identified by that QR code. The module also works with the “Application Runner” module where it can send information about the QR code using the %TEXT% macro. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “SmartHome – RIF+”. This module works with RIF+ automation devices. Various sensors can be connected to the device, and the module can receive their alarms. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, after that reconfiguration is required.
Extra module: Added new module “Smart-card reader”. The module receives information about the card holder from Omnikey access card readers and passes it further along the chain to the FaceID module to compare the photo from the database with the face of the person in front of the camera. It can be used in complex access control systems in restricted entry enterprises, in university campuses, in private residences, wherever greater level of security and identity verification of a pass holder is required. The module also works with the “Application Runner” module where it can send information about the access card using the %TEXT% macro. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Camera-Embedded Detector”. This module can use the built-in detectors and sensors of IP cameras that support the ONVIF protocol, as well as send commands to the camera. With this module in use, you can configure analytics rules in your camera, and stop using Xeoma detectors thus shifting some of the server load to the camera side. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Extra module: Added new module “Moving to PTZ preset“. When this module received alarms from previous modules in the chain, it can move a selected camera to a pre-defined position. The camera must support PTZ controls though ONVIF protocol. This module is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in a trial version of Xeoma for 1 hour, then reconfiguration is required.
Added the ability to search for a person through archive recordings by uploading a photo. The search can be performed in archive recordings of one camera or several at once. To start the search, go to the built-in Xeoma archive viewer’s menu, select the Search by photo option, and upload the photo for search from your device. The function is especially in demand in the “Safe City” systems, in the search for missing or wanted people, as well as in commercial areas when investigating incidents. This feature is purchased separately and activated over the Xeoma Standard or Xeoma Pro licenses. Available for testing in the trial version of Xeoma: the search will yield only one latest incident where this person (face) was detected.
Added search through archive recordings by object types for the previously released Extra module “Object Recognition”. Find this option in the Xeoma Archive Viewer menu. If object visualization is enabled, the recognized objects will also be visualized.
PRO: Added the long-awaited synchronization of archives with the SD card of an IP camera that supports the ONVIF protocol. If the connection with such a camera is interrupted for a while, the recording of events will continue to the camera’s memory card, and after the connection is restored, this missing segment will be downloaded from the camera’s video storage to the Xeoma archive. It works only with ONVIF cameras. Configure this feature in the “Preview and Archive” module settings.
PRO: Added failover (server backup) for the Xeoma Pro Your Cloud mode. Before this improvement you could do that with system tools. Now there’s the built-in Xeoma feature for such “hot” and “cold” servers. See more about Failover here.
PRO: Added LDAP support for devices under ARM architecture. Now all the advantages of active directories can be used on ARM devices like Raspberry, too.
PRO: License Plate Recognition: added the ability to set the number of frames the iANPR utility has to process. If it is not possible to limit the maximum speed of the traffic flow, this new setting, if used properly, can help avoid blurred frames, and thus aid in higher successful number recognition rate.
PRO: Improved search for license plates: now you can run the search through archive recordings for a license number directly from the ANPR log of recognized license plates.
PRO: Xeoma Pro Your Cloud: added the option to limit number of user-created interactive E-Maps.
Added the ability to automatically place active cameras (cameras with triggered detectors) in a separate tab. Try this option in the menu “Layouts” -> “Manage layouts” -> “Larger grid mode” -> “Show only active cameras”. This innovation will allow you to use one of the monitors for displaying streams from cameras where alarm events occurred. The camera disappears from this tab in 10 seconds after the alarm event is finished.
Added long-awaited export of the archive in the timelapse form. Now you can specify the desired speed (frame rate) of the resulting piece before the export starts. This faster playback timelapse effect will help you quickly evaluate what happened outside the Xeoma Archive Viewer. If viewed in the Xeoma’s Archive Viewer, you can use the flexible playback speed to achieve the timelapse effect. This effect is widely popular for visualizing long processes: for monitoring of building erection, or in the scientific fields for watching over plant growth, chemical reactions, etc.
Added digital zoom for moving objects. Now, even if your camera does not have the PTZ (pan-tilt-zoom) functions, you can use the ability to automatically track objects or people in the field of view of the camera. Find this option in Main menu -> “Zoom” -> “Automatic objects tracking”. If there are several objects in the frame, the automatic tracking still works flawlessly and monitors the largest object.
Added the ability to display a high resolution stream when viewing all cameras – including on mobile devices. Turn this smart option on in “Layouts” -> “Client decoding settings” -> “Video decoding on the client side for live preview”) and select the settings that suit you and your device best with the slider below.
Multi-server mode: added the ability to use digital zoom. Now you can zoom in on the parts of a camera image in real-time and in the archive, even if you are connected to several servers at once.
Added the ability to download CSV reports from the server via client connection. Now you can get reports from smart modules wherever you are, even if you are connected to the server remotely. Perfect for verticals where mobility and fast assessing of work results is important; for those who want to have access to information anytime, anywhere.
Problem Detector: Added new camera defocus option. Now the program can automatically notify you when camera is out of focus suddenly. This new feature is a great addition for stand-alone systems that work for months without human supervision.
Added support for cameras that use the PSIA protocol, an ONVIF equivalent, which ensures successful synchronization of devices from different manufacturers within a unified system.
Added export of still pictures in PNG and BMP formats (in addition to previously available JPEG). Now you can export a snapshot of the archive recording in these common formats right from the archive viewer
Added the ability to assign access rights to groups of cameras. Ideal for systems with hundreds of cameras. Now you do not need to manually set the access rights to each camera separately. You can divide cameras into groups on any basis (for example, by their geo location) and assign rights to new and old operators to this or that set of cameras. Look for this option in the Main Menu -> Remote Access -> Users.
Added the ability to copy layouts and tabs from one client to another. Now you can share your tabs and camera order configuration with other users of your video surveillance system. Save it to a file and upload it for any other account through the Layouts menu.
Added the ability to prohibit users to change camera order, leaving the possibility to set camera order only to the administrator. Search for this feature in Main Menu -> Remote Access -> Users.
Increased efficiency of sending JPEG images with the %JPEG% ({JPEG}) macro due to getting rid of unnecessary coding.
Added new archive playback speeds. Now you can view your archives 60 and even 900 times faster. Suitable for systems with a lot of records to watch really quickly.
Added support for two options of overwriting the archive: by calendar days and by actual content. In the first case, the old recordings will be overwritten by new ones, for example, after 7 days have passed since the recording date, even if less recordings were made actually (for example, if motion detection was used). In the second case, the actual filling of the archive will be considered: the records will be overwritten, for example, when there are 7 days-worth of actual records stored.
Added the ability to request test licenses of the program directly from its interface.
Free rebranding: Added the ability to fill in the list of servers for clients to connect to with the <ServersFileName> parameter. Use this option to provide operators with a customized version of Xeoma with a list of servers to connect to already filled-in.
Added the ability to edit created PTZ tours. Learn more about PTZ presets and guard/patrol tours here.

Also, these issues were fixed:

Fixed possible crash when using webrtc in Xeoma Pro Your Cloud.
Fixed problem with recording archives in case of problems with the database.
Fixed possible failure of the client part when CUDA hardware acceleration is engaged.

[close]

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 19.3.18 Beta
« Antwort #312 am: 19 März, 2019, 17:00 »
Whats new:>>

Enhanced work with new Additional modules.

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Perfect IP Camera Viewer 4.6
« Antwort #313 am: 24 März, 2019, 21:00 »
Perfect IP Camera Viewer allows you to create a professional video surveillance system on your computer in minutes.

Freeware

Whats new:>>

Privacy mask.
Video effects.
Bug fixes.

www.perfect-surveillance.com

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )

Offline SiLæncer

  • Cheff-Cubie
  • *****
  • Beiträge: 189182
  • Ohne Input kein Output
    • DVB-Cube
Xeoma 19.3.21 Beta
« Antwort #314 am: 02 April, 2019, 12:22 »
Whats new:>>

Fixed some bugs, enhanced stability

http://felenasoft.com/

Arbeits.- Testrechner :

Intel® Core™ i7-6700 (4 x 3.40 GHz / 4.00 GHz)
16 GB (2 x 8 GB) DDR4 SDRAM 2133 MHz
250 GB SSD Samsung 750 EVO / 1 TB HDD
ZOTAC Geforce GTX 1080TI AMPExtreme Core Edition 11GB GDDR5
MSI Z170A PC Mate Mainboard
DVD-Brenner Laufwerk
Microsoft Windows 10 Home 64Bit

TT S2 3200 ( BDA Treiber 5.0.1.8 ) + Terratec Cinergy 1200 C ( BDA Treiber 4.8.3.1.8 )